TY - CONF A1 - Krüger, P. A1 - Friedrich, Jörg Florian T1 - Gezielte chemische Funktionalisierung von Polymermaterialien T2 - 4. Wörlitzer Workshop "Funktionelle Schichten" CY - Wörlitz, Deutschland DA - 2003-05-27 PY - 2003 VL - 4 SP - 1(?) EP - 7(?) PB - EFDS CY - Dresden AN - OPUS4-7289 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Friedrich, Jörg Florian A1 - Mix, Renate A1 - Kühn, Gerhard T1 - Adhesion of metals to plasma-induced functional groups at polymer surfaces N2 - The peel strength of aluminium to polypropylene and poly(tetrafluoroethylene) was determined in dependence on the type and the concentration of functional groups on the polymer surface. For this purpose the polymer surface was equipped with monotype functional groups. The first method to produce monotype functionalized surfaces was an introduction of O functional groups using an oxygen plasma treatment and converting these groups to OH groups applying a wet chemical reduction. In result of this two-step treatment the hydroxyl group concentration at the polymer surface could be increased from 3–4 to 10–14 OH groups/100 C atoms. The second method consists in the deposition of a 150 nm adhesion-promoting layer of plasmapolymers or copolymers onto the polymer surface using the pulsed plasma technique. For that purpose functional groups carrying monomers as allyl alcohol, allylamine and acrylic acid were used. Applying the plasma-initiated copolymerization and using neutral “monomers” like ethylene or butadiene the concentration of the functional groups was varied. A correlation of peel strength with the ability of forming chemical interactions between Al atoms and functional groups was found: COOH > OH >> NH2 > H(CH2–CH2). KW - Peel strength KW - Aluminium KW - Polypropylene KW - Poly(tetrafluoroethylene) KW - Pulsed plasma KW - Allyl alcohol KW - Allylamine KW - Acrylic acid KW - Plasma surface treatment KW - Adhesion PY - 2005 SN - 0257-8972 VL - 200 IS - 1-4 SP - 565 EP - 568 PB - Elsevier Science CY - Lausanne AN - OPUS4-10897 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Friedrich, Jörg Florian A1 - Mix, Renate A1 - Kühn, Gerhard ED - Possart, W. T1 - Contribution of chemical interactions to the adhesion between evaporated metals and functional groups of different types at polymer surfaces PY - 2005 SN - 3-527-31263-3 SP - 265 PB - Wiley-VCH CY - Weinheim AN - OPUS4-10898 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Friedrich, Jörg Florian T1 - Kunststoffkorrosion durch Polymerabbau - Früherkennung und zeitraffende Prognose T2 - 1. Thüringer Grenz- und Oberflächentage CY - Jena, Deutschland DA - 2005-09-15 PY - 2005 SP - 33 EP - 50 PB - Innovent CY - Jena AN - OPUS4-10899 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meyer-Plath, Asmus A1 - Mix, Renate A1 - Kühn, Gerhard A1 - Friedrich, Jörg Florian ED - d'Agostino, R. T1 - The Potential of Surface Radicals for Polymer Functionalization T2 - 16th International Symposium on Plasma Chemistry (ISPC-16) CY - Taormina, Italy DA - 2003-06-22 PY - 2003 IS - CD-ROM PB - Dep. of Chemistry, Univ. CY - Bari AN - OPUS4-2612 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mierczynska, A. A1 - Friedrich, Jörg Florian A1 - Maneck, Heinz-Eberhard A1 - Boiteux, G. A1 - Jeszka, J.K. T1 - Segregated network polymer/carbon nanotubes composites N2 - In this work we present the preparation of conductive polyethylene/carbon nanotube composites based on the segregated network concept. Attention has been focused on the effect of decreasing the amount of filler necessary to achieve low resistivity. Using high- and low-grade single-walled carbon nanotube materials we obtained conductive composites with a low percolation threshold of 0.5 wt.% for high-grade nanotubes, about 1 wt% for commercial nanotubes and 1.5 wt% for low-grade material. The higher percolation threshold for low-grade material is related to low effectiveness of other carbon fractions in the network formation. The electrical conductivity was measured as a function of the single-walled carbon nanotubes content in the polymer matrix and as a function of temperature. It was also found that processing parameters significantly influenced the electrical conductivity of the composites. Raman spectroscopy was applied to study single wall nanotubes in the conductive composites. KW - Polymer KW - Single-walled carbon nanotubes KW - Composite KW - Segregated network KW - Sintering KW - Conductivity KW - Raman spectroscopy PY - 2004 DO - https://doi.org/10.2478/BF02475579 SN - 1644-3624 SN - 1895-1066 VL - 2 IS - 2 SP - 363 EP - 370 PB - Central European Science Journals CY - Warsaw AN - OPUS4-3583 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Friedrich, Jörg Florian T1 - Pulsed plasma initiated homo and copolimerisation - deposition rates and plasma diagnostic in dependence on pulse length and frequency T2 - ISPC-16 CY - Taormina, Italy DA - 2003-06-22 PY - 2003 AN - OPUS4-4667 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Friedrich, Jörg Florian T1 - Comparison of different plasmachemical processes for the formation of monosort functionalised polymer surfaces T2 - ISPC-16 CY - Taormina, Italy DA - 2003-06-22 PY - 2003 AN - OPUS4-4668 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Friedrich, Jörg Florian T1 - Pulsed plasma initiated homo and copolymerisation - characterization of thin plasma polymer layers by dielectric relaxation spectroscopy T2 - ISPC-16 CY - Taormina, Italy DA - 2003-06-22 PY - 2003 AN - OPUS4-4671 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Friedrich, Jörg Florian T1 - Complex organic thin films for optoelectronics: combined depossition techniques T2 - ECASIA `03 CY - Berlin, Germany DA - 2003-10-06 PY - 2003 AN - OPUS4-4674 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Fritz, Andreas A1 - Schönhals, Andreas A1 - Mix, Renate A1 - Kühn, Gerhard A1 - Friedrich, Jörg Florian T1 - Dielectric spectroscopy of plasma copolymers of the system allyl alcohol/alkene N2 - Polymers synthesized with plasma techniques are very interesting materials for electronic, optic, and bio compatible applications. Thin films of plasma polymers shows a good adhesion to metals, glass, or other polymers. But the supramolecular structure, the durability, and the chemical and mechanical behavior of these polymers is poorly understood. Therefore dielectric investigations are carried out to study the dynamic behavior of the plasma polymers. As polymer system allyl alcohol/alkene is chosen to get polymers with a defined concentration of hydroxyl groups. The dielectric investigations shows several relaxation processes and a dependency of the dielectric parameters from the ratio of allyl alcohol in the polymer is observed. This results indicated that the alkene monomers were assembled continuous into the polymer matrix. T2 - Frühjahrstagung des Arbeitskreises Festkörperphysik bei der DPG CY - Regensburg, Deutschland DA - 2002-03-11 PY - 2002 UR - http://old.dpg-tagungen.de/archive/2002/cpp_4.html SN - 0420-0195 SN - 0372-5448 SN - 0343-9216 IS - CPP 4.7 SP - 424 CY - Bad Honnef AN - OPUS4-2057 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Fritz, Andreas A1 - Schönhals, Andreas A1 - Mix, Renate A1 - Kühn, Gerhard A1 - Friedrich, Jörg Florian T1 - Dielectric spectroscopy of plasma copolymers or the system allyl alcohol/alkene T2 - Frühjahrstagung des Arbeitskreises Festkörperphysik bei der DPG CY - Regensburg, Germany DA - 2002-03-11 PY - 2002 SN - 0420-0195 SN - 0372-5448 SN - 0343-9216 IS - CPP 4.7 SP - 424 CY - Bad Honnef AN - OPUS4-2058 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gross, Thomas A1 - Retzko, Iris A1 - Friedrich, Jörg Florian A1 - Unger, Wolfgang T1 - Time-of-flight-SIMS and XPS characterization of metal doped polymers N2 - Organic thin films with defined chemical structures and physical properties are required for various applications. Plasma polymerization is of technological interest, since the deposition of plasma polymers is possible on any material of any shape in the desired thickness. We report on the TOF-SIMS (TOF: time-of-flight) and XPS investigations of pulse plasma ‘poly(acetylene)’ and alkali metal doped pulse plasma ‘poly(acetylene)’ films. The combination of TOF-SIMS and XPS supplies detailed information on the surface chemistry of these films. Application of both methods provides the possibility for cross-checking certain results. Moreover the different sensitivities of the methods can be utilized. According to the TOF-SIMS and XPS data it can be concluded that the interaction of alkali metals with plasma ‘poly(acetylene)’ results in electrovalent bonds of the type Me?+–C?- between carbon and metal. Furthermore carbon–oxygen–metal interactions were observed. These interactions are of the type C=O?-cdots, three dots, centeredMe?+ and/or C–O?-–Me?+. KW - SIMS KW - TOF-SIMS KW - XPS KW - Plasma KW - Polymer KW - Poly(acetylene) PY - 2003 DO - https://doi.org/10.1016/S0169-4332(02)00769-9 SN - 0169-4332 SN - 1873-5584 VL - 203-204 SP - 575 EP - 579 PB - North-Holland CY - Amsterdam AN - OPUS4-2271 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gajewski, Sven A1 - Maneck, Heinz-Eberhard A1 - Knoll, Uta A1 - Neubert, Dietmar A1 - Dörfel, Ilona A1 - Mach, Reinhard A1 - Strauß, Birgid A1 - Friedrich, Jörg Florian T1 - Purification of single walled carbon nanotubes by thermal gas phase oxidation N2 - Single walled carbon nanotubes (SWNT) have been produced in an electric arc discharge by using a graphite rod as anode which is filled with a powder mixture of graphite and metallic catalysts like nickel and yttrium. The soot material containing approximately a third of SWNT was collected from the cathode region as a soft, voluminous material. The main by-products in this process are amorphous carbon and graphitic nanoparticles which have to be removed by an appropriate purification process. The as-produced soot material was purified by gas phase oxidation in air at 355 °C. The oxidation of amorphous carbon in air is advantageous against wet chemical methods because it is better controllable. Thermogravimetric analysis and electron microscopy were used to investigate the oxidation behavior of the different kinds of carbon. Oxidation of SWNT and amorphous carbon occurs simultaneously even at moderate temperatures, whereas amorphous carbon is more rapidly oxidized than SWNT. For optimizing the purification procedure by gas phase oxidation, kinetic studies were used to determine the oxidation time for each component in the soot at a given temperature. So it is possible to remove the amorphous carbon quantitatively with minimal losses of SWNT. But it was found that graphitic nanoparticles have the highest stability against oxidation and could therefore not be quantitatively removed by this method without the complete destruction of SWNT. Therefore, the electric arc discharge process has to be a controlled process for minimum production of graphitic nanoparticles to obtain a material with a high content of SWNT. KW - Nanotubes KW - Cathodic arc discharge KW - Amorphous carbon KW - Oxidation PY - 2003 DO - https://doi.org/10.1016/S0925-9635(02)00362-X SN - 0925-9635 VL - 12 IS - 3-7 SP - 816 EP - 820 PB - Elsevier CY - New York, NY AN - OPUS4-2516 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Friedrich, Jörg Florian T1 - Quantitative measuring of C radical sites at polymer surfaces using the derivatization technique and XPS T2 - 10th European Conference on Applications of Surface and Interface Analysis (ECASIA '03) CY - Berlin, Germany DA - 2003-10-06 PY - 2003 AN - OPUS4-3920 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Friedrich, Jörg Florian T1 - Maßgeschneidete Polymeroberflächen T2 - BAM Kolloquium CY - Berlin, Germany DA - 2003-11-26 PY - 2003 AN - OPUS4-4205 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Friedrich, Jörg Florian T1 - Grundlagen für neuartige plasmachemische Prozesse zur gezielten und selektiven Polymermodifizierung T2 - VDI-Abschlußtreffen CY - Berlin, Germany DA - 2003-06-30 PY - 2003 AN - OPUS4-4206 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Friedrich, Jörg Florian T1 - Polymer surface modification with mono-functional groups of different type and density T2 - Institutskolloquium TU Dresden, Institut für Elektroniktechnologie CY - Dresden, Germany DA - 2003-01-29 PY - 2003 AN - OPUS4-4207 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Friedrich, Jörg Florian T1 - Designing and analytical characterization of polymer surfaces T2 - Institutskolloquium, Ciba Geigy CY - Basel, Switzerland DA - 2003-12-03 PY - 2003 AN - OPUS4-4208 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Friedrich, Jörg Florian T1 - Functionalization of polymer surfaces using plasmas T2 - Institutskolloquium Universität Stuttgart, Institut für Plasmaforschung CY - Stuttgart, Germany DA - 2003-12-04 PY - 2003 AN - OPUS4-4209 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Friedrich, Jörg Florian T1 - Polymer surface modification with monofunctional groups of different type and density T2 - ISPC-16 CY - Taormina, Italy DA - 2003-06-22 PY - 2003 AN - OPUS4-4200 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Friedrich, Jörg Florian T1 - Vergleich plasmaschemische Methoden zur Funktionalisierung von Polymeroberflächen T2 - X. Erfahrungsaustausch zu "Oberflächentechnologie mit Plasmaprozessen" CY - Klingenthal, Germany DA - 2003-03-18 PY - 2003 AN - OPUS4-4203 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Friedrich, Jörg Florian T1 - Contribution of chemical interactions between the different types of functional groups and metal atoms to the adhesion T2 - ECASIA `03 CY - Berlin, Germany DA - 2003-10-06 PY - 2003 AN - OPUS4-4204 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Friedrich, Jörg Florian T1 - Kunststoffkorrosion durch Polymerabbau - Früherkennung und zeitraffende Prognose T2 - Thüringer Grenz- und Oberflächentage - Oberflächentechnik für die Praxis CY - Jena, Germany DA - 2005-09-15 PY - 2005 AN - OPUS4-7853 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Oran, Umut A1 - Swaraj, Sufal A1 - Friedrich, Jörg Florian A1 - Unger, Wolfgang T1 - Surface analysis of Plasma Deposited Polymer Films, 5 - ToF-SSIMS Characterization of Plasma Deposited Allyl Alcohol Films N2 - The effect of the composite plasma parameter P/F, where P is the plasma power and F is the monomer flow rate, on the chemical character of pulsed plasma deposited allyl alcohol films was investigated by ToF-SSIMS. Information on the unsaturated character, the cross-linked and/or branched character of the plasma polymer films was derived in detail. The problem of the retention of OH groups in plasma deposited allyl alcohol films was elucidated in detail using SSIMS data. The lowest conversion rate from the monomer's hydroxyl groups to other oxygen functionalities in the plasma was concluded for the plasma polymer film produced at a P/F ratio of 0.05 W · sccm-1. It was found that the overall oxygen content of the films decreased vs. increasing P/F ratio. Because the freshly prepared films were investigated without air exposure, ageing on ambient air could be studied in detail. It was found that in the case of plasma deposited allyl alcohol films the ageing on air is probably based on two competing processes which are discussed in detail. Additionally, a review of literature data on the characterization of plasma deposited allyl alcohol films is given. KW - Ageing KW - Allyl alcohol KW - Plasma polymerization KW - ToF-SIMS PY - 2005 DO - https://doi.org/10.1002/ppap.200400075 SN - 1612-8850 SN - 1612-8869 VL - 2 IS - 7 SP - 563 EP - 571 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-11933 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Swaraj, Sufal A1 - Oran, Umut A1 - Lippitz, Andreas A1 - Friedrich, Jörg Florian A1 - Unger, Wolfgang T1 - Aging of Plasma-Deposited Films Prepared from Organic Monomers N2 - Plasma-deposited polymer films were prepared from organic molecules and investigated using near edge X-ray absorption fine structure (NEXAFS) and X-ray photoelectron spectroscopy (XPS) for aging effects after exposure to air. Results from the investigation of homopolymers are summarized. Primarily the effect of the deposition parameters duty cycle and power are dealt with. The effect of the deposition parameter pressure is briefly discussed. An example to show the effect of feed gas composition on the aging of plasma polymerized ethylene/allyl alcohol and styrene/allyl alcohol copolymer is also given. In general, change in content of unsaturated or aromatic species, change in concentration of monomer functionality, and change in the oxygen content was observed in the plasma polymerized films on aging. KW - Plasma copolymer KW - ESCA/XPS KW - NEXAFS KW - Plasma polymerization PY - 2007 SN - 1612-8850 SN - 1612-8869 VL - 4 IS - S1 SP - S784 EP - S789 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-11934 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -