TY - GEN A1 - Mix, Renate A1 - Kühn, Gerhard A1 - Friedrich, Jörg Florian ED - Mittal, K. L. T1 - Contribution of chemical interactions between Al atoms and different types of functional groups to the adhesion of Al-polymer systems T2 - 2nd International Symposium on Adhesion Aspects of Thin Films CY - Orlando, FL, USA DA - 2003-12-15 KW - Al-functional group interactions KW - Adhesion-promoting plasma polymer layers KW - Pulsed plasma polymerization PY - 2005 SN - 90-6764-421-8 VL - 2 SP - 123 EP - 144 PB - VSP CY - Utrecht AN - OPUS4-11156 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Grytsenko, K.P. A1 - Lytvyn, P. A1 - Friedrich, Jörg Florian A1 - Schulze, Rolf-Dieter A1 - Schrader, S. T1 - Influence of plasma discharge on the structure of polytetrafluoroethylene film and step coverage on polymer substrate N2 - Polytetrafluoroethylene (PTFE) films have been deposited onto polycarbonate (PC) substrates from the products of PTFE evaporation, activated by a cloud of accelerated electrons. A 40.68 MHz glow discharge was used during the deposition process. The polymer films have been characterised by XPS, FTIR and AFM. The use of the low power plasma during film growth led to the formation of PTFE films with modified structure. Films are amorphous and contain more cross-links, but in general, the structure of their macromolecules is still linear. An increase of RF-power leads to the formation of films with large amount of double bonds and enhanced internal stresses. Deposition of PTFE on PC without plasma treatment led to the formation of PTFE clusters up to 50 nm in diameter. The RMS roughness of the films, deposited without plasma, was about 4 nm, while the films deposited with plasma treatment had a roughness of 1.5 nm. The use of plasma has an additional effect if a PTFE coating is deposited on the PC substrate with submicrometer-sized steps. Without plasma the steps retain a rectangular shape. Deposited with the RF-discharge the PTFE layers resemble plasma-polymerised films. Under certain conditions the deposited films can fill trenches in the substrate like a wetting liquid, while under other conditions they avoid trenches and grow in between them. KW - Polytetrafluoroethylene KW - PTFE KW - Vacuum deposition KW - Plasma KW - Discharge KW - Film PY - 2007 DO - https://doi.org/10.1016/j.msec.2006.09.029 SN - 0928-4931 SN - 1873-0191 VL - 27 IS - 5-8 SP - 1227 EP - 1231 PB - Elsevier CY - Amsterdam AN - OPUS4-14014 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Oran, Umut A1 - Swaraj, Sufal A1 - Friedrich, Jörg Florian A1 - Unger, Wolfgang T1 - Static ToF-SIMS analysis of plasma chemically deposited ethylene/allyl alcohol co-polymer films N2 - A plasma co-polymerization of ethylene as a “chain extending” monomer and allyl alcohol as a carrier monomer for hydroxyl groups was studied. The composition of the feed gas was systematically varied and the plasma co-polymers were analyzed in terms of their relative concentrations of OH functional groups by static Time of Flight Secondary Ion Mass Spectrometry (ToF-SIMS) immediately after their preparation without any air contact, i.e., under so called “in situ” conditions. The relative OH group concentration involved in the –CH2–OH groups was derived from the normalized yields of the CH3O+ secondary fragment ion. The density of functional groups in the plasma co-polymers was found to vary non-linearly with respect to the mole percentage of the monomers in the feed gas. Co-polymerization phenomena, i.e. chemical interactions and recombination reactions taking place between monomer molecules in the plasma and/or during the deposition process, become evident in ToF-SIMS spectra. KW - Plasma deposition KW - ToF-SIMS KW - Plasma co-polymerization KW - Ethylene KW - Allyl alcohol PY - 2006 DO - https://doi.org/10.1016/j.apsusc.2006.02.089 SN - 0169-4332 SN - 1873-5584 VL - 252 IS - 19 SP - 6588 EP - 6590 PB - North-Holland CY - Amsterdam AN - OPUS4-13724 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Zeylanov, E. B. A1 - Friedrich, Jörg Florian T1 - Antioxidant Properties of Multiwall Carbon Nanotubes: First Measurements Using a Model Oxidative Reaction N2 - The potential use of date palm mesh fibres (DPMF) as natural reinforcement for polymeric matrices is investigated. DPMF were chemically cleaned using sodium hydroxide, carbon tetrachloride, a detergent, and an alcoholic mixture of toluene, methanol and ac... PY - 2006 SN - 0967-3911 SN - 1478-2391 VL - 14 IS - 8 SP - 779 EP - 785 PB - RAPRA Technology Ltd. CY - Shrewsbury AN - OPUS4-14237 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mix, Renate A1 - Gerstung, Vanessa A1 - Falkenhagen, Jana A1 - Schulze, Rolf-Dieter A1 - Friedrich, Jörg Florian T1 - Characterization of plasma-polymerized allyl alcohol polymers and copolymers with styrene KW - Plasma polymerization KW - Surface functionalization KW - Molar mass PY - 2007 SN - 0169-4243 SN - 1568-5616 VL - 21 IS - 5-6 SP - 487 EP - 508 PB - VNU Science Press CY - Utrecht AN - OPUS4-14765 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Zeynalov, Eldar A1 - Friedrich, Jörg Florian T1 - Anti-Radical Activity of Fullerenes and Carbon Nanotubes in Reactions of Radical Polymerization and Polymer Thermal/Thermo-Oxidative Degradation PY - 2007 SN - 0025-5300 VL - 49 IS - 5 SP - 265 EP - 270 PB - Hanser CY - München AN - OPUS4-14806 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Swaraj, Sufal A1 - Oran, Umut A1 - Friedrich, Jörg Florian A1 - Lippitz, Andreas A1 - Unger, Wolfgang T1 - Surface Chemical Analysis of Plasma-Deposited Copolymer Films Prepared from Feed Gas Mixtures of Ethylene or Styrene with Allyl Alcohol N2 - Plasma deposited styrene/allyl alcohol and ethylene/allyl alcohol copolymer films were prepared and characterized using XPS, NEXAFS and ToF-SIMS. The relative partial flow rates of the co-monomers are used as deposition process parameters to vary and all other process parameters were constrained to conditions optimized for retention of functional groups. By doing this it is possible to control certain chemical properties of the copolymer films such as unsaturation, oxygen and hydroxyl group relative surface contents. The aging behavior of the plasma copolymer films on air was studied, too. Non-linear variations of relative oxygen contents, contents of C—OR species and contents of carbonyl species are obtained vs. variation of feed gas composition for both monomer combinations. The chemical character of the plasma copolymer films varies between the limits given by the respective plasma homopolymers. The observed non-linear correlations are discussed in terms of approaches developed for classic radical copolymerization. The aging behavior of the different plasma copolymers films depends on the feed gas composition. Principally these aging phenomena known from plasma polymer aging studies of that respective monomer which dominates the character of the plasma copolymer are observed. KW - Plasma polymers KW - Plasma copolymers KW - XPS KW - NEXAFS KW - Allyl alcohol KW - ESCA/XPS KW - Plasma polymerization KW - ToF-SIMS PY - 2007 SN - 1612-8850 SN - 1612-8869 VL - 4 IS - 4 SP - 376 EP - 389 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-14846 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Friedrich, Jörg Florian T1 - Plasmachemische Polymer-Oberflächenmodifizierung für haftfeste Metall-Polymer-Verbunde T2 - 13. Workshop Oberflächentechnologie mit Plasma- und Ionenstrahlprozessen CY - Klingenthal, Germany DA - 2006-03-14 PY - 2006 AN - OPUS4-15349 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Meyer-Plath, Asmus A1 - Mix, Renate A1 - Friedrich, Jörg Florian ED - Mittal, K. T1 - Aspects of amino functionalization of polypropylene surfaces for adhesion promotion of thermally-evaporated copper films KW - Plasma polymerization KW - Surface functionalization KW - Gas discharge KW - Grafting KW - Amino groups KW - Copper KW - Metallization KW - Adhesion PY - 2007 SN - 978-90-6764-455-6 SN - 90-6764-455-2 VL - 3 SP - 177 EP - 198 PB - VSP CY - Leiden AN - OPUS4-15733 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wettmarshausen, Sascha A1 - Kühn, Gerhard A1 - Hidde, Gundula A1 - Mittmann, Hans-Ulrich A1 - Friedrich, Jörg Florian T1 - Plasmabromination - the Selective Way to Monotype Functionalized Polymer Surfaces N2 - In contrast to other plasma modification processes of polymer surfaces, the bromination is very selective and shows a high yield in C—Br groups. The most convenient bromination process was found using bromoform, which was thus preferred to elemental bromine, allyl bromide, vinyl bromide or tert-butylbromide. The bromoform process give yields in C—Br up to 40 C—Br or more, with only 2-3% co-introduction of O-functionalities whereas allyl bromide results in yields of about 20 C—Br and more, but in more than 10% oxygen-containing by-products. C—Br groups serve as anchoring points for grafting of molecules, oligomers and pre-polymers of diole or diamine character. KW - Functional groups KW - Grafting KW - Plasma bromination KW - Polymer surfaces KW - Selective plasma process KW - Spacer PY - 2007 DO - https://doi.org/10.1002/ppap.200700019 SN - 1612-8850 SN - 1612-8869 VL - 4 IS - 9 SP - 832 EP - 839 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-16209 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Yin, Huajie A1 - Mix, Renate A1 - Friedrich, Jörg Florian T1 - Influence of differently structured aluminium-polypropylene interfaces on adhesion N2 - Polar groups were introduced on polypropylene surfaces for increasing the surface energy and the peel strength to evaporated aluminium layers. Three kinds of plasma processes were used for introducing such functional groups to polyolefin surfaces: low-pressure radio-frequency (RF) O2 plasma exposure, atmospheric-pressure dielectric-barrier discharge (DBD) treatment in air, and the deposition of allylamine plasma polymer. The amino groups of the allylamine plasma polymer were also used as anchoring points for chemical introduction of covalently bonded spacer molecules equipped with reactive endgroups. Thus, silanol endgroups of a covalently bonded spacer were able to interact with the evaporated metal layer. The Al-PP composites achieved a maximal peel strength of 470 N/m by exposing the polymer to the lowpressure O2 plasma and 500 N/m on exposure to the atmospheric DBD plasma. After allylamine plasma polymerization and grafting of spacers, the peel strength was usually higher than 1500 N/m and the composites could not be peeled. KW - Polypropylene KW - Low-pressure RF oxygen plasma KW - Dielectric barrier discharge (DBD) KW - Pulsed plasma polymerization KW - Surface wettability KW - Peel strength PY - 2011 DO - https://doi.org/10.1163/016942410X511132 SN - 0169-4243 SN - 1568-5616 VL - 25 IS - 8 SP - 799 EP - 818 PB - VNU Science Press CY - Utrecht AN - OPUS4-23990 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wettmarshausen, Sascha A1 - Min, Hyegeun A1 - Unger, Wolfgang A1 - Jäger, Christian A1 - Hidde, Gundula A1 - Friedrich, Jörg Florian T1 - Significance of hydrogen-deuterium exchange at polyolefin surfaces on exposure to ammonia low-pressure plasma N2 - Since more than 40 years ammonia plasma exposure of polyolefins is used for introduction of primary amino groups. The selectivity of this reaction and the yield in primary amino groups was found to be low. Here, a prominent side-reactions of this process was investigated, the hydrogenation by NH3 plasma. For identification of hydrogenation ammonia (NH3) and deuterated ammonia (ND3) were exposed to Polyethylene (h-PE) and fully deuterated polyethylene (d-PE) as well as hexatriacontane (h-HTC) and fully deuterated hexatriacontane (d-HTC) as low-molecular weight model for PE. H–D exchange was assumed and detected by Time-of-Flight Secondary Ion Mass Spectrometry (ToF–SIMS), X-ray Photoelectron Spectroscopy (XPS), Attenuated Total Reflectance (ATR-FTIR) and 1H and 2H Nuclear magnetic Resonance. Results show a significant H–D exchange within the sampling depth of ATR (2.5 µm). However, N- and NH2 introduction was limited to the topmost surface as shown by SIMS and XPS (a few nanometers). KW - Deuterated ammonia KW - Ammonia plasma KW - Deuterated polyolefins KW - Hexatriacontane KW - H-D exchange PY - 2011 DO - https://doi.org/10.1007/s11090-011-9304-5 SN - 0272-4324 VL - 31 IS - 4 SP - 551 EP - 572 PB - Plenum Publ. Corp. CY - New York, NY, USA AN - OPUS4-24178 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Friedrich, Jörg Florian T1 - Mechanisms of plasma polymerization - reviewed from a chemical point of view N2 - Several reaction mechanisms have been proposed for the formation of plasma polymers, such as monomer fragmentation followed by poly-recombination into randomly structured and crosslinked films; fragmentation, accompanied by the formation of acetylene or other film-forming intermediates and deposition of polystyrene-like material; plasma-initiation of a radical chain-growth polymerization; and ion-molecule reactions, as well as ionic chain-growth polymerization. The bulk structure of plasma polymers is completely irregular, far from that of conventional polymers. The retention of functional groups during plasma polymerization tends to be greater than that of the entire monomer structure found again as an intact repeat unit in the resulting plasma polymer. An alternative method for depositing ultra-thin, pin-hole free coatings, ones that possess regular structures, is by electrospray ionization (ESI) of pre-fabricated polymers. KW - Fragmentation-recombination KW - Mechanism KW - Plasma polymerization KW - Pulsed plasma KW - Structure of plasma polymers PY - 2011 DO - https://doi.org/10.1002/ppap.201100038 SN - 1612-8850 SN - 1612-8869 VL - 8 IS - 9 SP - 783 EP - 802 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-24502 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mix, Renate A1 - Ramanujam, Maalolan A1 - Wachtendorf, Volker A1 - Friedrich, Jörg Florian ED - Reichert, T. T1 - New ways for early detection of polymer ageing N2 - Photo-oxidative ageing of polymers under defined exposure (UV, humidity) was investigated from two points of view: a) the ageing process Starts from the topmost surface and penetrates slowly towards bulk and b) radicals play an important role among ageing. Therefore, X-ray photoelectron (XPS) and electron spin resonance (ESR) spectroscopy were applied to show both, the progressive incorporation of oxygen during in-situ UV irradiation (XPS) and the formation of radicals (ESR) in the polymer. The intensity of ESR Signals served as measure for radical concentration. The Validation of this correlation was checked for polyethylenes (PE) equipped with different concentrations of Hostavin N30 UV stabilizer. T2 - 5th European weathering symposium - Natural and artificial ageing of polymers CY - Lisbon, Portugal DA - 21.09.2011 PY - 2011 SN - 978-3-9813136-2-8 N1 - Serientitel: CEEES Publication – Series title: CEEES Publication IS - 15 SP - 157 EP - 163 PB - GUS (Gesellschaft für Umweltsimulation) CY - Pfinztal AN - OPUS4-24535 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ramanujam, Maalolan A1 - Wachtendorf, Volker A1 - Mix, Renate A1 - Schönhals, Andreas A1 - Friedrich, Jörg Florian ED - Reichert, T. T1 - Influence of UV weathering and humidity on surface & bulk properties of LDPE N2 - The outdoor weathering of polymers is mainly due to UV radiation, water, Pollution, humidity, temperature etc. To understand the effects of weathering, simulated tests need to be undertaken in lab scale. Such tests must be quite efficient and similar to the effects of natural weathering. This paper mainly focuses on the effects of UV radiation along with humidity on LDPE. T2 - 5th European weathering symposium - Natural and artificial ageing of polymers CY - Lisbon, Portugal DA - 21.09.2011 KW - LDPE KW - UV weathering KW - Humidity PY - 2011 SN - 978-3-9813136-2-8 N1 - Serientitel: CEEES Publication – Series title: CEEES Publication IS - 15 SP - 211 EP - 218 PB - GUS (Gesellschaft für Umweltsimulation) CY - Pfinztal AN - OPUS4-24536 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Grytsenko, K. P. A1 - Kolomzarov, Y. A1 - Lytvyn, O. A1 - Strelchuk, V. A1 - Ksianzou, V. A1 - Schrader, S. A1 - Beyer, H. A1 - Servet, B. A1 - Enouz-Vedrenne, S. A1 - Garry, G. A1 - Schulze, Rolf-Dieter A1 - Friedrich, Jörg Florian T1 - Metal-filled polytetrafluoroethylene nanostructered thin film N2 - Thin metal-filled polyterafluoroethylene films with various metal concentration were produced by co-deposition in vacuum. Metal nanocluster size increased with metal concentration. Films were heated up to 300 degrees C, their optical spectra were recorded during heating. The changes in plasmon band shape and wavelength of the nanocluster ensemble during heating are not linearly related with metal concentration and heating temperature. This is caused by different thermal behavior of the complex processes, which are taking place in each of the two materials present in the film. The metal cluster size and optical properties of the whole ensemble can be purposefully formed by varying metal nature, its concentration and annealing temperature of the film. Nano- and micro-domains with properties different from original film were generated by focused excimer laser or electron beam. Gold-filled PTFE nano-structured films were used as substrate for surface enhanced Raman scattering measurements of ultrathin film of Rhodamine 6G dye. KW - Gold nanoparticles KW - Arrays KW - SERS PY - 2010 UR - http://openurl.ingenta.com/content?genre=article&issn=1936-6612&volume=3&issue=3&spage=308&epage=312 DO - https://doi.org/10.1166/asl.2010.1127 SN - 1936-6612 SN - 1936-7317 VL - 3 IS - 3 SP - 308 EP - 312 PB - American Scientific Publ. CY - Stevenson Ranch, Calif. AN - OPUS4-23957 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mix, Renate A1 - Friedrich, Jörg Florian T1 - Improvement of adhesivity of polypropylene by its surface modification using the aerosol dielectric barrier discharge N2 - Plasma processes are used in many fields of Science and technology. While a plasma oxygen treatment produces a broad variety of different oxygen-containing functional groups, tailored - surface functionalisation demands preset functional groups in known concentration. Due to the fact that most of plasma experiments need expensive vacuum equipment increased efforts are to observe to apply atmospheric pressure plasma processes. Thus, Dielectric Barrier Discharge (DBD) and corona treatment of polymer foils have a long tradilion in industry to modify them for printing, laminating, adhesion promotion, etc. Thercibre, increasing interest is observed to make these atmospheric pressure processes more effeclive. Newly developed methods like plasma-printing were used for surfaces in biological and medical applications or for printed circuits. T2 - ADHESION `11 - 11th Triennial conference on the science and technology of adhesion and adhesives CY - York, UK DA - 07.09.2011 PY - 2011 SP - 253 EP - 256 AN - OPUS4-24337 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Friedrich, Jörg Florian A1 - Wettmarshausen, Sascha A1 - Meyer-Plath, Asmus A1 - Ziemann, Sylvia A1 - Hidde, Gundula A1 - Zeynalov, Eldar T1 - Plasmabromierung von graphitischen Materialien - Kovalente Anbindung organischer Moleküle N2 - Die hochselektive und ausbeutereiche plasmachemische Bromierung von Polyolefinoberflächen wurde auf graphitische Materialien übertragen. Oberflächen von graphenartigem Highly Oriented Pyrolytic Graphite (HOPG), natürlichem Graphit, mehrwandige Kohlenstoffnanoröhren (MWCNT) sowie Kohlenstoff-Fasern wurden im Bromdampfplasma behandelt. Während die Bromierung von Polyolefinoberflächen als radikalische Wasserstoffabstraktion mit nachfolgender Addition (Rekombination) oder durch nucleophile Substitution an sp³-hybridisierten C-Atomen abläuft, können graphitische Strukturen sowohl an sp³-hybridisierten Strukturdefekten als auch durch elektrophile Addition an vollständig C-substituierte aromatische Doppelbindungen bromiert werden. Dabei werden die planaren (graphitischen) sp²-C-Atome in die tetraedrische sp³-Hybridisierung umgewandelt und zu elektrisch nichtleitenden Strukturen gefaltet. Die maximalen Bromausbeuten bei Verwendung von Brom als Plasmamedium lagen je nach Substrat zwischen 10–50% Br/C, mit Bromoform deutlich darüber, was durch Kombinationen von Bromoform mit Brom oder Allylbromid mit Bromoform durch Schichtbildung auf über 70% Br/C gesteigert werden konnte. An die C-Br-Gruppen wurden nasschemisch verschiedene Amine nucleophil gepfropft. Die Pfropfausbeuten von 1–10 Moleküle je 100 C lagen deutlich niedriger als die erreichten Pfropfgrade von etwa 1–22 Moleküle je 100 C-Atome an Polyolefinoberflächen. Da nach der chemischen Pfropfung nahezu alle nichtgepfropften Br-Gruppen verschwunden waren, muss auf eine bevorzugte Rekonstruktion der planaren sp²-Graphitschicht geschlossen werden. KW - Polymerbromierung PY - 2012 DO - https://doi.org/10.1002/vipr.201200481 SN - 0947-076X SN - 1522-2454 VL - 24 IS - 1 SP - 24 EP - 29 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-25518 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - BOOK A1 - Friedrich, Jörg Florian T1 - The plasma chemistry of polymer surfaces - Advanced techniques for surface design KW - Plasma chemistry KW - Polymer surfaces PY - 2012 SN - 978-3-527-31853-7 SP - 1 EP - 466 PB - Wiley-VCH Verlag GmbH & Co. KGaA CY - Weinheim AN - OPUS4-25920 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hanelt, Sven A1 - Friedrich, Jörg Florian A1 - Orts Gil, Guillermo A1 - Meyer-Plath, Asmus T1 - Study of Lewis acid catalyzed chemical bromination and bromoalkylation of multi-walled carbon nanotubes N2 - Chemical functionalization of carbon nanotubes (CNT) with nucleophiles requires introduction of electrophilic reactive sites on the CNTs. This can, for instance, be accomplished by the chemical bromination procedure with elemental bromine and a set of Lewis acids (BBr3, BF3 × Et2O, AlBr3, FeBr3, ZnBr2, TiBr4, SiBr4, SnBr4, VBr3) or a radical starter like dibenzoylperoxide (DBPO) in appropriate solvents at varied temperature. The present approach to electrophilic sites relies on the well-known electrophilic aromatic substitution or addition of bromine with aromatic structural units. In addition to the use of bromine, the introduction of haloalkyl groups was also investigated here using bis-electrophiles or haloalcohols and Brønsted acids. The advantages and drawbacks of the studied reaction conditions, the obtained degree of bromination as analyzed by X-ray photoelectron spectroscopy (XPS) and the amount of introduced bromine that can be substituted by a nucleophile are presented and discussed. KW - Carbon nanotubes KW - Bromierung KW - Lewis Säure KW - Bromalkylierung KW - CNT PY - 2012 DO - https://doi.org/10.1016/j.carbon.2011.11.009 SN - 0008-6223 SN - 1873-3891 VL - 50 IS - 3 SP - 1373 EP - 1385 PB - Pergamon Press CY - New York, NY AN - OPUS4-25207 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -