TY - GEN A1 - Czichos, Horst T1 - Systems approach to the analysis of wear problems T2 - National Conference on Lubrication, Friction and Wear in Engineering CY - Melbourne, Australia DA - 1980-12-01 PY - 1980 SN - 0-85825-148-5 SP - 247 EP - 252 CY - Barton AN - OPUS4-9354 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Czichos, Horst A1 - Gervé, A. A1 - Holland, J. T1 - Reise einer deutschen Tribologie-Delegation in die VR China PY - 1980 SN - 0036-6218 VL - 27 IS - 4 SP - 118 EP - 120 PB - Vincentz CY - Hannover AN - OPUS4-9355 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Czichos, Horst T1 - Funktionale Aufgaben technischer Oberflächen T2 - Tagung Oberflächenschutz beginnt beim Konstruieren CY - Stuttgart, Deutschland DA - 1982-10-12 PY - 1982 SN - 3-18-090449-6 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 449 SP - 13 EP - 21 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-9496 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Czichos, Horst T1 - Methodik zur Analyse und Planung von Reibungs- und Verschleißuntersuchungen PY - 1982 SN - 0722-7787 VL - 1 SP - 173 EP - 185 PB - Expert-Verl. CY - Grafenau AN - OPUS4-9497 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Czichos, Horst T1 - Systematische Analyse und Bearbeitung von Reibungs- und Verschleißproblemen PY - 1982 SN - 3-88508-752-9 SP - 15 EP - 35 PB - Expert-Verl. CY - Grafenau AN - OPUS4-9498 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Czichos, Horst T1 - Tribologie - Stand und Entwicklungstendenzen der Reibungs- und Verschleißforschung N2 - Der Begriff „Tribologie“ wurde im Jahre 1966 von einem britischen Komitee mit folgender Definition geprägt: „Tribology, the Science and technology of interacting surfaces in relative motion“. Die von der Tribologie auf dem Gesamtgebiet Reibung - Verschleiß - Schmierung zu bearbeitenden technischen Probleme sind äußerst vielfältig; sie reichen von Lagerungen, Führungen, Getrieben, Bremsen über den Themenkreis Rad - Schiene bis hin zu Fragen der spanlosen und spangebenden Werkstoffbearbeitung und elektrischen Kontakten. Die große Bedeutung des Gebietes Tribologie zeigen folgende Abschätzungen: - In den Industrieländern (z. B. USA, Großbritannien, Bundesrepublik Deutschland) gehen jährlich etwa 1 bis 2% des Bruttosozialproduktes in Form von reibbedingten Energieverlusten und verschleißbedingten Materialverlusten verloren, d. h. für die Bundesrepublik Werte von mehr als 10 Mrd. DM. - Es werden jährlich weltweit etwa 5000 bis 6000 Veröffentlichungen auf dem Gebiet der Tribologie publiziert. PY - 1983 SN - 0049-8688 SN - 1521-4052 VL - 14 SP - 179 EP - 180 PB - VCH Verl.-Ges. CY - Weinheim AN - OPUS4-9499 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Czichos, Horst T1 - Influence of Adhesive and Abrasive Mechanisms on the Tribological Behaviour of Thermoplastic Polymers N2 - Results of investigations on thermoplastic polymers are presented which can be interpreted by prevailing adhesive or abrasive mechanisms as well as by an overlap of different tribological processes. For polymer-polymer sliding pairs it was found that friction is decisively connected with adhesion. When data on the surface energy of the examined polymers were used, the experimentally determined friction values could be related to the adhesion energies of the different polymer-polymer sliding pairs. For polymer-steel sliding pairs the wear behaviour under prevailing abrasive mechanisms was studied. A relationship was established between the combined stresses in the interfacial area and the tensile or rupture strength of the polymers studied. The tribological behaviour of glass-fibre-reinforced polymers such as polyamides and poly(phenylensulphide) is determined by an overlap of different processes which are influenced by the orientation of the glass fibres with respect to the sliding area rather than by the percentage of the glass fibres added. Different investigation methods, e.g. scanning electron microscopy and energy-dispersive analysis of X-rays, revealed that numerous individual processes such as adhesion, material transfers, retransfers, abrasion, deformation and rupture processes as well as surface fatigue overlap in the complex wear behaviour of glass-fibre-reinforced polymers. PY - 1983 SN - 0043-1648 VL - 88 SP - 27 EP - 43 PB - Elsevier CY - Amsterdam AN - OPUS4-9500 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Czichos, Horst T1 - Materialforschung und -prüfung - ein technisch-wirtschaftlicher Schlüsselbereich N2 - Technik und Wirtschaft der Industrienationen werden immer mehr durch neue Technologien und Weiterentwicklung konventioneller Verfahren beeinflußt. In den USA und Japan ist die Förderung besonders wichtiger Technologien erheblich intensiviert worden. Eine Untersuchung in den Ländern der Europäischen Gemeinschaft zeigt, daß auf dem Technologiesektor die Materialforschung und -prüfung eine zentrale Bedeutung besitzt. PY - 1983 SN - 0722-8562 SN - 0041-6347 VL - 83 IS - 18 SP - 540 EP - 544 PB - Umschau Verl. Breidenstein CY - Frankfurt, M. AN - OPUS4-9501 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Czichos, Horst T1 - Tribology - Scope and Future Directions of Friction and Wear Research N2 - In recent years tribology has been widely recognized as a new general concept embracing all aspects of transmission and dissipation of energy and materials in mechanical equipment, including the areas of friction, wear, lubrication, and related fields of science and technology. Since friction is responsible for a major loss of useful mechanical energy and wear is a major reason for replacing equipment, a better understanding and utilization of the principles of tribology is particularly important for conservation of energy and materials in engineering design. This review briefly summarizes the state of the art of tribology and outlines possible directions of future research. The paper is based on an invited lecture in a session on "World Trends in Wear Research" at the International Conference on Wear of Materials, Reston, Virginia, April 14-17, 1983. PY - 1983 SN - 0148-6608 VL - 35 SP - 18 EP - 20 PB - American Institute of Mining and Metallurgical Engineers CY - New York, NY AN - OPUS4-9502 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Prakash, J. A1 - Czichos, Horst T1 - Influence of Surface Roughness and its Orientation on Partial Elastohydrodynamic Lubrication of Rollers N2 - In this paper, a complete solution for a rough, isothermal elastohydrodynamic line contact operating in the partial lubrication regime is presented. The semianalytical EHD line contact model developed recently [12], is used in solving the coupled System of average Reynolds equation and the elasticity equation. The effects of various operating Parameters and the roughnessParameters are investigated with an emphasis on the outlet behavior. The results indicate that in the partial lubrication regime changes in the outlet may play an important role on the stability of elastohydrodynamic films. PY - 1983 SN - 0022-2305 VL - 105 SP - 591 EP - 597 PB - American Society of Mechanical Engineers CY - New York, NY AN - OPUS4-9503 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -