TY - CONF A1 - Zoёga, Andreas A1 - Kurz, J. H. A1 - Oelschlägel, T. A1 - Rohrschneider, A. A1 - Müller, Christina A1 - Pavlovic, Mato A1 - Hintze, H. A1 - Kanzler, D. T1 - Investigations to introduce the probability of detection method for ultrasonic inspection of hollow axles at Deutsche Bahn N2 - Currently at Deutsche Bahn (DB) ultrasonic inspections in maintenance procedures for wheelset axles with a bore hole are, to the greatest possible extent, carried out using automated ultrasonic inspection system. Although the acceptance levels are in accordance with DIN 27201 part 7, the testing results have shown in recent years that in the case of true indications, the effective defect sizes were far below the level of acceptance. Due to this experience it can be assumed that the automated ultrasonic inspection systems are testing substantially more sensitively than required. This increased sensitivity leads to an increase in false indications, generally resulting in the unnecessary demounting of wheelsets. In Research cooperation between Federal Institute for Materials Research and Testing (BAM) and DB the effective flaw detection sensitivity of existing automated ultrasonic inspection system will be determined and the true/false indication ratio optimised. Through systematic investigations with the Probability of Detection method on the existing automated ultrasonic inspection system the results could be directly applied to the optimisation of existing ultrasonic inspections of wheelset axles with a bore hole in maintenance procedures and the level of reliability can be considerably increased. T2 - 19th World Conference on Non-Destructive Testing CY - München, Germany DA - 13.06.2016 KW - NDT KW - Reliability KW - POD KW - Railway KW - Axles KW - UT PY - 2016 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-375813 UR - http://www.ndt.net/article/wcndt2016/papers/we2g4.pdf SP - id 19515, 1 EP - 8 AN - OPUS4-37581 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wüstenberg, Hermann A1 - Erhard, Anton A1 - Bertus, Norbert A1 - Hintze, H. A1 - Schüssler, M. T1 - Recent advances in ultrasonic inspection of railway axles and wheels PY - 2001 SN - 0007-1137 VL - 43 IS - 3 SP - 180 EP - 182 PB - British Institute of Non-Destructive Testing CY - Northampton AN - OPUS4-18771 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas A1 - Rühe, S. A1 - Hintze, H. A1 - Armbruster, R. T1 - Neue Prüftechnik für den Schienenprüfzug - Erfahrungen, Fehlerbilder, Auswertetechniken T2 - DGZfP-Jahrestagung 2009 CY - Münster, Deutschland DA - 2009-05-18 KW - Schienenprüfzug PY - 2009 SN - 978-3-940283-16-0 IS - DGZfP-BB 115 ( Di.2.B.4) SP - 1 EP - 7 AN - OPUS4-20511 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Erhard, Anton A1 - Heckel, Thomas A1 - Schenk, Gottfried A1 - Hintze, H. T1 - Laufende Instandhaltung von Schienenfahrzeugen - Einsatz der Gruppenstrahlertechnik zur Radsatzprüfung N2 - Zur Gewährleistung des sicheren Betriebs von Schienenfahrzeugen werden bei der laufenden Instandhaltung die Radsätze (Laufräder und Radsatzwellen) mittels Ultraschall auf Fehlerfreiheit geprüft. Auf Grund der Komplexität der durchzuführenden Prüfungen an der Radscheibe von scheibengebremsten Fahrzeugen ist beim Einsatz konventioneller Techniken eine große Anzahl Ultraschallprüfköpfe erforderlich, deren Reduzierung eine technische Herausforderung darstellt. Auch bei der Prüfung von Radsatzvollwellen sind auf Grund der eingeschränkten Zugänglichkeit unterschiedliche Winkelprüfköpfe erforderlich. Ein Ziel der Untersuchungen bestand darin, die Anzahl der erforderlichen konventionellen Prüfköpfe deutlich zu reduzieren. Dazu kann die Gruppenstrahlertechnik einen Beitrag leisten. KW - Ultraschall- und Wirbelstromprüfung KW - Radsätze von Personenverkehrszügen und Schienen PY - 2004 DO - https://doi.org/10.3139/120.100560 SN - 0025-5300 VL - 46 IS - 1-2 SP - 40 EP - 45 PB - Carl Hanser Verlag CY - München AN - OPUS4-2654 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Krull, R. A1 - Hintze, H. A1 - Thomas, Hans-Martin A1 - Heckel, Thomas T1 - Zerstörungsfreie Prüfung an Schienen heute und in der Zukunft PY - 2003 SN - 1618-8330 VL - 127 IS - 06-07 SP - 286 EP - 296 PB - Siemens CY - Berlin AN - OPUS4-2644 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krull, R. A1 - Hintze, H. A1 - Thomas, Hans-Martin A1 - Heckel, Thomas T1 - ZfP an Schienen heute und in der Zukunft T2 - DVM-Tag 2003 CY - Berlin, Deutschland DA - 2003-05-07 KW - Schienenprüfung KW - Wirbelstromprüfung KW - Ultraschall KW - Head Checks KW - Gruppenstrahlertechnik PY - 2003 N1 - Serientitel: DVM-Bericht – Series title: DVM-Bericht IS - 670 SP - 141 EP - 151 PB - DVM CY - Berlin AN - OPUS4-2522 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Tscharntke, Dirk A1 - Heckel, Thomas A1 - Boehm, Rainer A1 - Erhard, Anton A1 - Krull, R. A1 - Lützner, J. A1 - Hintze, H. ED - Forde, M. C. T1 - Development of ultrasonic railway inspection systems using phased array methods T2 - 6th Railway Engineering Conference CY - London, England, UK DA - 2003-04-30 KW - NDT KW - Ultrasonic KW - Phased array KW - Railway KW - Inspection KW - Directivity pattern KW - Crack analysis/sizing PY - 2003 SN - 0-947644-51-2 PB - Engineering Technics Press CY - Edinburgh AN - OPUS4-2487 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hahn, H. A1 - Hintze, W. A1 - Treumann, Hartwig T1 - Safety and technological aspects of black powder PY - 1980 SN - 0340-7462 SN - 1521-4087 SN - 0033-1163 VL - 5 IS - 5 SP - 129 EP - 134 PB - Verl. Chemie CY - Weinheim AN - OPUS4-9340 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Thomas, Hans-Martin A1 - Junger, M. A1 - Hintze, H. A1 - Krull, R. A1 - Rühe, S. T1 - Pioneering inspection of railroad rails with eddy currents N2 - Using a rail-inspection train, the Deutsche Bahn's system of railroads is continuously checked for traffic-induced defects. Until now, only ultrasonic inspection was used. In addition, eddy-current inspection could successfully and efficiently be used to detect and evaluate certain surface cracks - so-called head checks. There have already been reports about laboratory tests which proved the general suitability of this test method [1,2]. The next step - described here - consisted of practical trials under real-life conditions. A test system which is able to fulfil the strict requirements (test speeds of up to 100 km/h, complex probe guidance, suppression of electrical and mechanical interference, recording of data, filtering and evaluation of data) was developed. As part of the rail-inspection train and as a manual system, this inspection system was successfully tested on the Deutsche Bahn's system of railroads under real-life conditions. T2 - 15th World Conference on Non-Destructive Testing (WCNDT) CY - Roma, Italy DA - 2000-10-15 KW - Schienenprüfung PY - 2000 UR - http://www.ndt.net/article/wcndt00/papers/idn796/idn796.htm SN - 1435-4934 VL - 5 IS - 11 SP - 1 EP - 6(?) PB - NDT.net CY - Kirchwald AN - OPUS4-1010 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thomas, Hans-Martin A1 - Krull, R. A1 - Hintze, H. ED - Edel, K.-O. T1 - Moderne Methoden der zerstörungsfreien Werkstoffprüfung im Oberbau T2 - Internationales Symposium "Schienenfehler" 2000 CY - Brandenburg, Deutschland DA - 2000-11-16 PY - 2000 SP - 3-1-3-16 PB - Fachhochsch., Der Rektor CY - Brandenburg AN - OPUS4-1102 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wüstenberg, Hermann A1 - Hauser, T. A1 - Boehm, R. A1 - Hintze, H. A1 - Fischer, E. T1 - Neue Ansätze zur Ultraschallprüfung von Eisenbahnachsen mit Array-Prüfköpfen T2 - Jahrestagung Zerstörungsfreie Materialprüfung ; 2001 (Berlin) : 2001.05.21-23 CY - Berlin, Deutschland DA - 2001-05-21 PY - 2001 UR - http://www.ndt.net/article/dgzfp01/papers/v20/v20.htm N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 75-CD PB - DGZfP CY - Berlin AN - OPUS4-1136 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Thomas, Hans-Martin A1 - Pohl, Rainer A1 - Krull, R. A1 - Hintze, H. A1 - Rühe, S. T1 - Erfahrungen beim Einsatz der Wirbelstromprüfung an Schienen N2 - Kurzfassung Es wurde eine Prüftechnologie basierend auf dem Wirbelstromverfahren entwickelt, mit der es möglich ist, oberflächennahe Fehler in Schienen zu detektieren und zu bewerten. Die bisherigen Untersuchungen haben gezeigt, dass Fahrkantenfehler (Head Checks) mit Risstiefen bis zu 10 mm bewertet werden können. Darüber hinaus werden weitere Inhomogenitäten und Fehler wie z. B. Schleuderstellen, Belgrospi's und Squats detektiert. Für die Anwendung der Prüftechnologie kommen 4 Anwendungsgebiete in Frage: Ausrüstung von Schienenprüfzügen, Manuelle Schienenprüfung, Ausrüstung von Schienenschleifzügen, Ausrüstung von stationären Schienenprüfständen. Die Prüftechnik befindet sich zur Zeit in der Erprobungsphase. Der Schienenprüfzug der Deutschen Bahn AG wird in Kürze mit einem achtkanaligen Prüfsystem ausgerüstet. Ebenfalls im Erprobungseinsatz befindet sich ein Handprüfsystem zur manuellen Schienenprüfung. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2002 CY - Weimar, Deutschland DA - 2002-05-06 PY - 2002 UR - http://www.ndt.net/article/dgzfp02/papers/v36/v36.htm SN - 3-931381-39-0 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 80-CD PB - DGZfP CY - Berlin AN - OPUS4-1391 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erhard, Anton A1 - Bertus, Norbert A1 - Montag, Hans-Joachim A1 - Schenk, Gottfried A1 - Hintze, H. T1 - Ultrasonic Phased Array System for Railroad Axle Examination N2 - Introduction Due to the long history of railroad companies around the world, varying means of examination according to the specifications for the different railroad components have been carried out based on the general industrial progress of the country [1-3]. For more than 50 years the application of customized ultrasonic techniques for the examination of railroad components has increased, in comparison to conventional ultrasonic techniques used until to the end of 20th century. In this traditional atmosphere some accidents have disturbed the silent harmony of companies involved in the production of critical parts. More than ever high speed modern trains require modern and advanced examination techniques [4-8]. For practical application new ultrasonic techniques have been developed and optimized in co-operation with the German Railroad Company. In the present contribution the inspection of railroad axles will be described. The ultrasonic technique used for the examination is the phased array technique. The optimization of the phased array probes for the different geometries of the axles given was completed using a computer model for directivity calculations. In relation to the limited accessibility between wheel and brake angles of incidence for shear waves in the range between 28° and 72° are necessary. During the examination of the axles a a considerable amount of ultrasonic data must be stored (storage of the digitized A-scans). However, due to economic aspects the evaluation of this data should be carried out in a very short time. The whole examination of one axle should not exceed 5 minutes. Therefore we have developed a special evaluation program adapted to the particular problematic of the axle inspection. The build up of the whole inspection system was done with partners from the industry like Krautkramer and a division of the Research Department of the Deutsche Bahn AG. In this consortium the Research Department of the Deutsche Bahn AG was responsible for the specification of the inspection problem, Krautkramer for the organization of the whole technical follow up and BAM for the development and optimization of the ultrasonic inspection technique as well as for the evaluation software. Some examples concerning the optimization process will be described in the present contribution. T2 - 8th ECNDT CY - Barcelona, Spain DA - 2002-06-17 PY - 2002 UR - http://www.ndt.net/article/ecndt02/75/75.htm PB - European Federation for Non-Destructive Testing CY - Barcelona AN - OPUS4-1414 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -