TY - CONF A1 - Baier, Jennifa A1 - Beck, Uwe A1 - Hidde, Gundula A1 - Hielscher, Stefan A1 - Lange, Thorid A1 - Mix, Renate T1 - Plasmagestützte Oberflächenfunktionalisierung von Polypropylen (PP) N2 - Polypropylen (PP) ist als Niedrigenergie-Polymer ohne nass- und plasmachemische Vorbehandlung weder haftfest zu beschichten noch verbundfest zu kleben. Typische Haft- bzw. Klebfestigkeiten liegen für die unbehandelte Polymeroberfläche bei maximal 0,5 MPa. Hinzu kommt, dass bei der Bestimmung von Haft- und Klebfestigkeiten der unmodifizierten Oberfläche mit großen Streuungen zu rechnen ist, die bezogen auf die Spannweite durchaus einem Faktor 5 entsprechen können. Generell besteht bei Prüfung der Haftfestigkeit mittels Stirnabzugsversuch und bei der Prüfung der Klebfestigkeit die Notwendigkeit eines statistisch validierten Herangehens. Hierzu sind zeitaufwändige Ein-Proben-Klebungen und -Prüfungen nur eingeschränkt geeignet. Zudem ist, insbesondere für geringe Haft- bzw. Klebfestigkeiten, ein querkraftfreies Prüfen Grundvoraussetzung. Im vorliegenden Beitrag werden verschiedenartige plasmagestützte Oberflächenfunktionalisierungen von PP sowie das Mehr-Proben-Konzept zur Klebung/Prüfung von bis zu acht Proben vorgestellt. Dazu werden ein BAM-Funktionsmuster einer Mehr-Proben-Kleb-Vorrichtung und eine kommerzielle analytische Zentrifuge zum Prüfen verwendet. T2 - 24. Workshop des Anwenderkreises Atmosphärendruckplasma "Haftung durch Oberflächenfunktionalisierung" CY - Erfurt, Germany DA - 11.11.2015 KW - Plasmamodifizierung KW - Polypropylen KW - Haftfestigkeit KW - Klebfestigkeit KW - Mehr-Proben-Kleben/-Prüfen PY - 2015 SP - 1 EP - 6 PB - Anwenderkreis Atmosphärendruckplasma CY - Jena AN - OPUS4-34838 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Baier, Jennifa A1 - Hidde, Gundula A1 - Beck, Uwe T1 - Oberflächenaktivierung von Polymeren mittels O2-Plasma N2 - Zur Verbesserung der Verbundfestigkeit kann beim Kleben [1] oder Beschichten von Polymeren die Oberfläche mittels 02-Plasma gereinigt (Feinstreinigung) und aktiviert werden. Bei der Plasmaaktivierung werden sauerstoffhaltige funktionelle Gruppen auf der Oberfläche gebildet. Die Polymersubstrate wurden mit 02-Plasma behandelt, zum einen mit einem Plasmajet bei 200 W (PP, PA) und zum anderen mit einem Mikrowellenplasma bei 100 W (Folie: PE, PP, PS, PC, PET), mittels FTIR-Spektroskopie (p-ATR) charakterisiert sowie die Änderung der Oberflächenenergie mittels Kontaktwinkelmessung bestimmt. T2 - 10. ThGOT Thementage Grenz- und Oberflächentechnik mit 4. Optik-Kolloquium CY - Leipzig, Germany DA - 02.09.2014 KW - Plasma KW - Oberflächenaktivierung PY - 2014 SP - 1 EP - 2 AN - OPUS4-31337 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Beck, Uwe A1 - Baier, Jennifa A1 - Hidde, Gundula A1 - Hielscher, Stefan A1 - Kittler-Packmor, Kai A1 - Lange, Thorid A1 - Mix, Renate A1 - Weise, Matthias T1 - Multiple-sample approach: reliable ranking and validated statistics of bonding and adhesive strength N2 - Bonding strength of adhesive-bonded joints and adhesive strength of coatings have been exclusively determined in single-sample tests using a tensile testing machine. Necessarily, the single-sample approach was also applied to the corresponding bonding procedure. As a consequence, reliability and reproducibility of results were restricted. By applying the newly introduced centrifuge technology, the multiple-sample approach was realized for simultaneous tensile testing of up to eight samples under identical conditions without any disturbing shear-force effects. In order to introduce the multiple-sample approach into the bonding procedure, a hydraulic bonding set-up was developed which enables identical bonding pressure also for slightly different heights of sample assemblies. Both sample approaches were compared for various application examples: ranking of different classes of adhesives, validated statistics of adhesive-bonded joints using one particular adhesive and effects of cleaning and plasma-treatment on the adhesive strength of coatings. The investigated systems included glass, metals and polymer substrates, different adhesives, metallic and dielectric coatings on polymers. T2 - EURADH 2014 - 10th European Adhesion Conference CY - Alicante, Spain DA - 22.04.2014 KW - Bonding strength KW - Adhesive strength KW - Multi-sample approach KW - Centrifuge technology PY - 2014 SN - 978-84-616-9067-1 SN - 84-616-9067-2 SP - Paper 49, 211 EP - 214 AN - OPUS4-31309 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Beck, Uwe A1 - Baier, Jennifa A1 - Hidde, Gundula A1 - Hielscher, Stefan A1 - Kittler-Packmor, Kai A1 - Lange, Thorid A1 - Mix, Renate A1 - Weise, Matthias T1 - Multiple-sample approach: reliable ranking and validated statistics of bonding and adhesive strength N2 - Bonding strength of adhesive-bonded joints and adhesive strength of coatings have been exclusively determined in single-sample tests using a tensile testing machine. Necessarily, the single-sample approach was also applied to the corresponding bonding procedure. As a consequence, reliability and reproducibility of results were restricted. By applying the newly introduced centrifuge technology, the multiple-sample approach was realized for simultaneous tensile testing of up to eight samples under identical conditions without any disturbing shear-force effects. In order to introduce the multiple-sample approach into the bonding procedure, a hydraulic bonding set-up was developed which enables identical bonding pressure also for slightly different heights of sample assemblies. Both sample approaches were compared for various application examples: ranking of different classes of adhesives, validated statistics of adhesive-bonded joints using one particular adhesive and effects of cleaning and plasma-treatment on the adhesive strength of coatings. The investigated systems included glass, metals and polymer substrates, different adhesives, metallic and dielectric coatings on polymers. KW - Bonding strength KW - Adhesive strength KW - Multi-sample approach KW - Centrifuge technology PY - 2014 SN - 978-3-944261-28-7 SN - 978-3-944261-36-2 SN - 978-3-944261-52-2 VL - 5 SP - 1 EP - 5 AN - OPUS4-31310 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -