TY - CONF A1 - Kasch, Thomas A1 - Binder, Christian A1 - Brock, Thomas A1 - Hesse, Olaf A1 - Treisch, Nico T1 - Sind Berstscheiben in Anlagen für hochverdichteten Sauerstoff ein Sicherheitsrisiko? N2 - Armaturen und Anlagenteile für Hochdruck-Sauerstoff enthalten meistens nichtmetallische Materialen als Sitz- und Dichtungswerkstoffe. Die Gefahr eines Ausbrands dieser Armaturen; ist grundsätzlich vorhanden, jedoch relativ gering, wenn neben dem richtigen Design geeignete metallische und nichtmetallische Materialien für die vorgesehenen Betriebsbedingungen von Druck und Temperatur gewählt werden. Aus sicherheitstechnischer Sicht sollte daher für Armaturen und Anlagenteile, die komplett aus Metall gefertigt und metallisch abgedichtet werden, eine noch geringere Gefahr eines Ausbrands bestehen. Während einer Versuchsreihe auf dem BAM-TTS- Frei Versuchsgelände mit Hochdruck-Sauerstoff brannte jedoch unerwartet ein solches - rein metallisches Anlagenteil - komplett ab. Bei diesen Versuchen platzt eine metallische Membran wie eine Berstscheibe bei einem bestimmten Sauerstoffdruck auf. T2 - 3. Magdeburger Brand- und Explosionsschutztag / vfdb-Workshop CY - Magdeburg, Germany DA - 21.03.2013 KW - Sauerstoff KW - Aluminium KW - Berstscheibe KW - Brandgefahr KW - Zündursache KW - Unfallanalyse PY - 2013 SN - 978-3-00-041601-9 SP - 1 EP - 8 AN - OPUS4-27996 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kasch, Thomas A1 - Binder, Christian A1 - Brock, Thomas A1 - Hesse, Olaf A1 - Treisch, Nico T1 - Berstscheiben in Sauerstoffanlagen - Berstscheiben sollen der Sicherheit dienen - doch in Sauerstoffanlagen können sie ein Sicherheitsrisiko darstellen N2 - Die Gefahr eines Ausbrandes bei Armaturen und Anlagenteilen für Sauerstoff ist latent vorhanden wenn ungeeignete nichtmetallische Dichtungsmaterialien eingesetzt werden. Aus sicherheitstechnischer Sicht sollten daher komplett aus metallischen Materialien gefertigte und gedichtete Sauerstoffkomponenten kaum die Gefahr eines Ausbrands aufweisen. Auf dem 'BAM Testgelände Technische Sicherheit' (BAM-TTS) erfolgte der Ausbrand eines derartigen Sauerstoff-Anlagenteils daher völlig unerwartet. Neben dem heftigen Metallabbrand wurde glühendes metallisches Material bis zu 70 m weit geschleudert und führte zu mehreren Grasbränden. Die anschließenden Untersuchungen konzentrierten sich insbesondere auf die beiden Metallsorten Aluminium und Stahl, aus denen der Großteil der kommerziell erhältlichen Berstscheiben besteht. KW - Sauerstoff KW - Berstscheibe KW - Brandgefahr KW - Zündursache KW - Unfallanalyse KW - Sicherheitsrisiko PY - 2013 SN - 2191-0073 VL - 3 IS - 10 SP - 50 EP - 53 PB - Springer-VDI-Verl. CY - Düsseldorf AN - OPUS4-29314 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Binder, Christian A1 - Arlt, Karin A1 - Brock, Thomas A1 - Hartwig, Peter A1 - Hesse, Olaf A1 - Kasch, Thomas T1 - The importance of quality assurance and batch testing on nonmetallic meaterials used for oxygen service N2 - In oxygen components, even for high pressure oxygen service, it is possible to use organic seals, lubricants, or filling liquids, provided their oxygen compatibility has been checked. However, fire incidents in oxygen systems still occur because these materials ignite and burn. There are many reasons, such as incorrect design, contamination, faulty operation, unsuitable materials, etc., why this happens. Another cause that is overseen very often is proper maintenance on the user´s side. It is very important to replace in a component a worn out seal by the same one with identical oxygen compatibility properties. On the part of the producer or distributor of materials, batch testing and also a quality assurance system play a key role in the safety of an oxygen component. Any change in the manufacturing process of a material, or in its composition, and even its further processing may have an impact on its oxygen compatibility and finally on the component in which it is used. Numerous investigations by BAM over decades reveal the influence of minor constituents and fillers on a material´s oxygen compatibility. The test results in this paper show how important it is to regularly perform batch testing on nonmetallic materials used for oxygen service and to have a quality assurance system that helps minimize incidents where unsuitable materials are chosen by accident. KW - Oxygen compatibility KW - Nonmetallic materials KW - Pneumatic impact KW - Flammability KW - Components KW - Maintenance KW - Batch testing KW - Quality assurance PY - 2009 U6 - https://doi.org/10.1520/JAI102309 SN - 1546-962X VL - 6 IS - 8 SP - 1 EP - 8 PB - American Society for Testing and Materials CY - West Conshohocken, Pa. AN - OPUS4-20740 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Binder, Christian A1 - Brock, Thomas A1 - Hesse, Olaf A1 - Lehné, Siegfried A1 - Kasch, Thomas T1 - Ignition sensitivity of nonmetallic materials in oxygen-enriched air (NITROX): a never ending story in SCUBA diving? N2 - Self-contained underwater breathing apparatus (SCUBA) divers use different mixtures of nitrogen and oxygen as breathing gas. The so-called NITROX mixture often contains more oxygen than is contained in air and may increase the fire hazard in diving equipment. The SCUBA diving community, however, still differentiates between NITROX mixtures that contain more than 40 % oxygen or less. They consider a mixture with up to 40 % oxygen often as regular air. In filling operations of SCUBA cylinders, gas flows from high pressure to low pressure. Because of compressive heating, a sudden temperature rise in the gas occurs and nonmetallic materials, e.g., seals may ignite. BAM has used the pneumatic impact test to investigate the ignition sensitivity of ethylene propylene diene monomer (EPDM), fluorelastomer (FPM), polytetrafluorethylene (PTFE), polyetheretherketone (PEEK), and nylon (PA 6.6) to gaseous impacts in synthetic air, in various NITROX mixtures, and in pure oxygen. The test results clearly show that for nonmetallic materials, the maximum pressure of nonreaction in NITROX mixtures decreases at a content of 29 % oxygen in comparison to those in air. In addition, autoignition temperatures of the nonmetallic materials were also determined. The findings of this investigation support very well the results of other publications on oxygen enrichment. As a consequence of this study, in SCUBA diving, the same safety requirements for NITROX mixtures with more than 21 % oxygen should be applied as for pure oxygen in the industry. KW - NITROX KW - SCUBA diving KW - Filling process KW - Pneumatic impact KW - Autoignition temperature KW - Flammability KW - Nonmetallic materials KW - Oxygen mixtures KW - Fire hazard KW - Oxygen enrichment PY - 2009 U6 - https://doi.org/10.1520/JAI102262 SN - 1546-962X VL - 6 IS - 8 SP - 1 EP - 7 PB - American Society for Testing and Materials CY - West Conshohocken, Pa. AN - OPUS4-20741 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ciscato, W. A1 - Binder, Christian A1 - Hesse, Olaf A1 - Lehné, Siegfried A1 - Kasch, Thomas ED - Davis, S.E. ED - Steinberg, T.A. T1 - Another dangerous practice in the SCUBA diving community N2 - The widely held incorrect belief in the self-contained underwater breathing apparatus (SCUBA) diving community, that oxygen-enriched gas mixtures, so-called NITROX, with an oxygen content of up to 40 vol. % can be considered as regular air, has already been refuted in many papers. Now, another dangerous practice has drawn the attention. In a market study, more than 60 representative SCUBA cylinder valves were examined. Sales offices claim that all of those valves can be used for oxygen-enriched gas mixtures. The fact is that some of these cylinder valves are for air use only. By exchanging the nonmetallic materials and applying additional cleaning procedures, these air valves become so-called “oxygen clean.” Then, the valves are on sale for oxygen-enriched service. This procedure is dangerous because the labeling pretends a pseudo-safety. All of the 60 SCUBA cylinder valves were tested applying the standardized oxygen pressure surge tester at BAM. As suspected, many of the cylinder valves are not burn-out safe. In addition, different test results were received for actual new valves, for so-called new but temporarily stored valves, and for used valves. This paper reveals another dangerous practice and wants to alert the SCUBA diving community. KW - SCUBA diving KW - Pneumatic impact KW - Burn-out safety KW - Oxygen KW - NITROX KW - Modified air valves KW - Aging of diving valves KW - Oxygen compatibility PY - 2012 SN - 978-0-8031-7547-1 U6 - https://doi.org/10.1520/STP20120007 VL - 13 IS - STP 1561 SP - 162 EP - 171 CY - West Conshohocken, PA, USA AN - OPUS4-27136 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kasch, Thomas A1 - Binder, Christian A1 - Hesse, Olaf A1 - Lehné, Siegfried A1 - Ciscato, W. ED - Davis, S.E. ED - Steinberg, T.A. T1 - Safe for oxygen but not for oxygen-enriched gas mixtures in SCUBA diving PY - 2012 SN - 978-0-8031-7547-1 U6 - https://doi.org/10.1520/STP20120005 VL - 13 IS - STP 1561 SP - 172 EP - 181 CY - West Conshohocken, PA, USA AN - OPUS4-27137 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kasch, Thomas A1 - Binder, Christian A1 - Brock, Thomas A1 - Hesse, Olaf A1 - Treisch, Nico ED - Beyer, M. ED - Stolz, T. T1 - Stellen metallische Berstscheiben in Sauerstoffanlagen ein mögliches Sicherheitsrisiko dar? N2 - Die meisten Sauerstoffarmaturen und -anlagenteile bestehen aus Metallen und enthalten nichtmetallische Materialen als Sitz- und Dichtungswerkstoffe. Die Gefahr eines Ausbrands ist grundsätzlich vorhanden, jedoch relativ gering, wenn neben der richtigen Konstruktion geeignete metallische und nichtmetallische Materialien für die vorgesehenen Betriebsbedingungen gewählt werden. Aus sicherheitstechnischer Sicht sollten Sauerstoffarmaturen und -anlagenteile, die komplett aus metallischen Materialien gefertigt und abgedichtet werden, ein noch geringeres Risiko eines Ausbrands aufweisen. Bei einer Versuchsreihe auf dem BAM-TTS-Freiversuchsgelände brannte unerwartet ein rein metallisches Anlagenteil komplett ab. Bei dieser Versuchsanordnung platzt eine metallische Berstscheibe bei einem bestimmten Sauerstoffdruck auf. Die anschließenden Untersuchungen konzentrierten sich auf die Frage, wie es bei diesem Versuch zu einem Ausbrand des massiven Anlagenteils kommen konnte. Im Vortrag werden die Ergebnisse der Untersuchungen diskutiert und die Sauerstoffverträglichkeit der verwendeten Metalle auf Grundlage des Abbrandverhaltens nach ASTM G 124-95 verglichen. Es wird versucht, die Frage zu beantworten, ob der Einsatz metallischer Berstscheiben zu einer Erhöhung der Brandgefahr in Sauerstoffanlagen führen kann. T2 - 13. BAM-PTB-Kolloquium zur chemischen und physikalischen Sicherheitstechnik CY - Braunschweig, Germany DA - 18.06.2013 KW - Berstscheibe KW - Sauerstoffarmatur KW - Sauerstoffanlage KW - Ausbrandrisiko PY - 2013 UR - http://public.ptb.de/oa/doi/210_20130909i.pdf SN - 978-3-95606-062-5 U6 - https://doi.org/10.7795/210.20130909i SN - 1868-5838 SP - 82 EP - 89 AN - OPUS4-29713 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Kasch, Thomas A1 - Brock, Thomas A1 - Hesse, Olaf A1 - Hartwig, Peter ED - Steinberg, Th. A. ED - Chiffoleau, G. J. T1 - Assessment Criteria to Evaluate Test Results on Compatibility of Nonmetallic Materials for Oxygen Service Based on BAM’s Safety Philosophy N2 - The general requirement, that nonmetallic materials for oxygen service must be tested and found suitable for their intended use in plants and components is the current state of technical safety. However, numerous requests of manufacturers, sales offices, and users show that there is still a strong need for information on how these materials are tested and evaluated. Based on more than 60 years of expertise, this paper provides background information on BAM’s test approach. It explains why BAM applies additional assessment criteria on nonmetallic materials for certain use conditions. Hence, the test schedule as well as the final evaluation shall reflect the practical application in a more customer-related way in combination with a higher safety level. That is the demand of BAM’s safety philosophy. KW - Oxygen compatibility KW - Background information on test approaches KW - Evaluation of test results KW - Assessment criteria KW - BAM’s safety philosophy PY - 2021 SN - 978-0-8031-7698-0 U6 - https://doi.org/10.1520/STP1626-EB SN - 0899-6652 VL - STP 1626 - 15 SP - 1 EP - 12 PB - ASTM International CY - West Conshohocken, PA, USA AN - OPUS4-54888 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -