TY - CONF A1 - Omar, Hassan A1 - Hertwig, Andreas A1 - Szymoniak, Paulina A1 - Schönhals, Andreas T1 - Signature of the Adsorbed Layer on the glass transition of thin polymer Films: Broadband Dielectric spectroscopy and related techniques N2 - In well annealed thin polymer films with non-repulsive polymer/substrate interaction with a substrate an irreversibly adsorbed layer is expected to form. These adsorbed layers have shown a great potential for technological applications [1]. However, the growth kinetics and the molecular mobility of the adsorbed layer is still not fully understood. This concerns also the influence of the adsorbed layer on the thickness dependence of the glass transition temperature of thin films. This is partly due to the difficult accessibility of these layers in thin films. Here, the irreversibly adsorbed layers of semi-rigid mail chain polymers like polycarbonate or polysulfone are revealed by solvent-leaching experiments. First, the growth kinetics of these layers is investigated as a function of annealing time. The film thickness, topography and the quality of the adsorbed layer is controlled by Atomic Force Microscopy (AFM). Secondly, the molecular mobility of the adsorbed layer is investigated by Broadband Dielectric Spectroscopy (BDS). A developed nanostructured capacitor arrangement is employed to measure the layer with a free surface. In addition to the dielectric experiments, spectroscopic Ellipsometry measurements are carried out to estimate the glass transition of the thin films. The thickness dependence of the glass transition of the thin films is correlated with the adsorbed layer [2,3]. Acknowledgments D. Hülagü and G. Hidde thanked for the help with the ellipsometry measurements. T2 - 12. Conference on Broabband Dielectric Spectroscopy and its Application CY - Lisbon, Portugal DA - 01.09.2024 KW - Thin films PY - 2024 AN - OPUS4-60959 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Stockmann, Jörg M. A1 - Hertwig, Andreas A1 - Beck, Uwe T1 - Visualization of low-contrast surface modifications: Thin films, printed pattern, laser-induced changes, imperfections, impurities, and degradation N2 - Visualization of surface modifications may be very challenging for coating/substrate systems of either almost identical optical constants, e.g. transparent films on substrates of the same material, or minor film thickness, substance quantity and affected area, e.g. ultra-thin or island films. Methods for visualization are optical microscopy (OM), imaging ellipsometry (IE), and referenced spectroscopic ellipsometry (RSE). Imaging ellipsometry operates at oblique incidence near Brewster angle of the bare, clean or unmodified substrate. In this configuration, reflected intensities are rather weak. However, the contrast to add-on and sub-off features may be superior. Referenced spectroscopic ellipsometry operates in a two-sample configuration but with much higher intensities. In many cases, both ellipsometric techniques reveal and visualize thin films, printed-pattern, laser-induced changes, and impurities better than optical microscopy. In particular for stratified homogeneous modifications, ellipsometric techniques give access to modelling and hence thickness determination. Modifications under investigation are polymer foil residue on silicon, laser-induced changes of ta-C:H coatings on 100Cr6 steel, imperfections of ta-C:H on thermal silicon oxide, degradation of glass, thin film tin oxide pattern on silicon, printed and dried pattern of liquids such as deionized water, cleaning agents, and dissolved silicone. © 2016 Elsevier B.V. All rights reserved. T2 - International Conference on Spectroscopic Ellipsometry (ICSE-7) CY - Berlin, Germany DA - 06.06.2016 KW - Optical microscopy (OM) KW - Imaging ellipsometry (IE) KW - Referenced spectroscopic ellipsometry (RSE) KW - Thin films KW - Impurities KW - Degradation PY - 2016 DO - https://doi.org/10.1016/j.apsusc.2016.10.145 SN - 0196-4332 VL - 2017 IS - 421 SP - 807 EP - 812 PB - Elsevier B.V. AN - OPUS4-42136 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Fischer, Daniel A1 - Hertwig, Andreas A1 - Beck, Uwe A1 - Lohse, V. A1 - Negendank, D. A1 - Kormunda, M. A1 - Esser, N. T1 - Thin SnOx films for surface plasmon resonance enhanced ellipsometric gas sensing (SPREE) N2 - Background: Gas sensors are very important in several fields like gas monitoring, safety and environmental applications. In this approach, a new gas sensing concept is investigated which combines the powerful adsorption probability of metal oxide conductive sensors (MOS) with an optical ellipsometric readout. This concept Shows promising results to solve the problems of cross sensitivity of the MOS concept. Results: Undoped tin oxide (SnOx) and iron doped tin oxide (Fe:SnOx) thin add-on films were prepared by magnetron sputtering on the top of the actual surface plasmon resonance (SPR) sensing gold layer. The films were tested for their sensitivity to several gas species in the surface plasmon resonance enhanced (SPREE) gas measurement. It was found that the undoped tin oxide (SnOx) shows higher sensitivities to propane (C3H8) then to carbon monoxide (CO). By using Fe:SnOx, this relation is inverted. This behavior was explained by a change of the amount of binding sites for CO in the layer due to this iron doping. For hydrogen (H2) no such relation was found but the sensing ability was identical for both layer materials. This observation was related to a different sensing mechanism for H2 which is driven by the Diffusion into the layer instead of adsorption on the surface. Conclusion: The gas sensing selectivity can be enhanced by tuning the properties of the thin film overcoating. A relation of the binding sites in the doped and undoped SnOx films and the gas sensing abilities for CO and C3H8 was found. This could open the path for optimized gas sensing devices with different coated SPREE sensors. KW - Doped tin oxide KW - Ellipsometry KW - Gas sensing KW - Surface plasmon KW - Resonance KW - Thin films KW - Transparent conductive oxides PY - 2017 DO - https://doi.org/10.3762/bjnano.8.56 SN - 2190-4286 VL - 8 SP - 522 EP - 529 AN - OPUS4-39391 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rybachuk, Maksym A1 - Hertwig, Andreas A1 - Weise, Matthias A1 - Sahre, Mario A1 - Männ, Marion A1 - Beck, Uwe A1 - Bell, J. M. T1 - Near infrared optical materials from polymeric amorphous carbon synthesized by collisional plasma process N2 - The synthesis of polymerlike amorphous carbon (a-C:H) thin-films by microwave excited collisional hydrocarbon plasma process is reported. Stable and highly aromatic a-C:H were obtained containing significant inclusions of poly(p-phenylene vinylene) (PPV). PPV confers universal optoelectronic properties to the synthesized material. That is a-C:H with tailor-made refractive index are capable of becoming absorption-free in visible (red)-near infrared wavelength range. Production of large aromatic hydrocarbon including phenyl clusters and/or particles is attributed to enhanced coagulation of elemental plasma species under collisional plasma conditions. Detailed structural and morphological changes that occur in a-C:H during the plasma synthesis are also described. KW - Kohlenstoffschichten KW - Plasmachemie KW - PA-CVD KW - Amorphous state KW - Carbon KW - Coagulation KW - Hydrogen KW - Optical materials KW - Plasma collision processes KW - Plasma deposition KW - Refractive index KW - Thin films PY - 2010 DO - https://doi.org/10.1063/1.3431292 SN - 0003-6951 SN - 1077-3118 VL - 96 IS - 21 SP - 211909-1 - 211909-3 PB - American Institute of Physics CY - Melville, NY AN - OPUS4-21365 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hertwig, Andreas A1 - De Castro, F.A. T1 - Newsletter - Metrology for the manufacturing of thin films KW - Metrology KW - Thin films KW - Optoelectronics KW - Photovoltaics KW - Coatings technology KW - Traceability PY - 2012 UR - http://projects.npl.co.uk/optoelectronic_films/documents/EMRP%20ThinFilms_Newsletter%20Feb%202012.pdf IS - February SP - 1 EP - 4 AN - OPUS4-25505 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schmidt-Grund, R. A1 - Sturm, C. A1 - Hertwig, Andreas T1 - Ellipsometry and polarimetry - Classical measurement techniques with always new developments, concepts, and applications N2 - Ellipsometry is a matured experimental method, whose roots reach back into the early phase of modern optics itself. It is often attributed to be invented by Paul Drude in the last decade of the 19th century, but similar techniques had already been applied for years before Drude started his work. With this Special Issue about ellipsometry and related techniques, we hope to bring more attention to this method and advance and propagate it to be used by a broader community. We have collected a good mixture of articles: some texts are more in the line of users’ tutorial and best practice guides; others are intended to show recent developments of the method. With this collection, we also hope to show the generally rapidly expanding possibilities of ellipsometry and polarimetry to draw attention of new users and previously unrelated communities to this valuable tool. KW - Ellipsometry KW - Polarimetry KW - Surfaces KW - Thin films KW - Optical analysis PY - 2022 DO - https://doi.org/10.1515/aot-2022-0025 SN - 2192-8584 SN - 2192-8576 VL - 11 IS - 3-4 (Topical issue: Ellipsometry) SP - 57 EP - 58 PB - De Gruyter CY - Berlin AN - OPUS4-55467 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -