TY - CONF A1 - Lange, T. A1 - Neher, F. A1 - Klemm, E. A1 - Heinrich, Sebastian A1 - Balcazar Pust, Emilio A1 - Liebner, Christian A1 - Hieronymus, Hartmut T1 - Heterogeneous catalysis meets micro reactors: Partial oxidations in the explosion regime N2 - Investigations on primary, secondary and tertiary explosion protection have been performed for micro reactors with slit-like channels which are coated with catalyst. Ethene/oxygen mixtures have been used as model gas mixtures representing explosion group IIB (DIN EN ISO 16852). It could be shown that the explosion regime can be significantly reduced when using micro reactors (primary explosion protection). Furthermore, safe Operation inside the explosion regime is possible with micro reactors (secondary explosion protection), but, at certain conditions thermal runaway and ignition of detonations are possible. An unexpected behaviour has been found, because thermal runaway occurred when Volumetrie flow rate was increased. This behaviour is completely opposite to that of multi tube fixed bed reactors which show an increase of safety when increasing volumetric flow rate. Micro reactors can be constructed pressure-resistant even when detonations occur inside (tertiary explosion protection). For the example of o-xylene oxidation it could be shown that space time yield can be increased significantly when entering explosion regime. T2 - DGMK International conference - Selective oxidation and functionalization: Classical and alternative routes and sources CY - Berlin, Germany DA - 13.10.2014 PY - 2014 SN - 978-3-941721-44-9 VL - 2014-3 SP - 97 EP - 105 AN - OPUS4-31759 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Liebner, Christian A1 - Hieronymus, Hartmut A1 - Heinrich, Sebastian A1 - Edeling, Florian A1 - Lange, T. A1 - Klemm, E. ED - Beyer, M. ED - Stolz, T. T1 - Zündung, Ausbreitung und Unterdrückung von Explosionen in einem Mikroreaktor N2 - Der vorliegende Beitrag behandelt spezifische Aspekte der Sicherheitstechnik bei heterogen katalysierten Oxidationsreaktionen. Ergebnisse von Explosionsuntersuchungen an Ethen-Sauerstoffgemischen in einem kontinuierlich betriebenen Mikroreaktor, die beispielsweise für den Ethylenoxidprozess relevant sind, werden vorgestellt. Der Anfangsdruck der untersuchten Eduktgemische lag zwischen 1000 hPa und 10000 hPa bei Anfangstemperaturen zwischen Umgebungstemperatur und einer Temperatur bis zu 673 K. Mikrostrukturierte Reaktoren bieten einen erweiterten Bereich von Betriebsbedingungen. Die Untersuchungen zielen auf den sicheren Betrieb eines Mikroreaktors bei Bedingungen, die bei konventionellen Reaktoren als innerhalb des Explosionsbereichs eingestuft werden, ab. In bestimmten Grenzen kann eine Unterdrückung von Explosionen in einem Mikroreaktor erreicht werden. Es ist jedoch nicht möglich, einen Mikroreaktor unter allen Bedingungen sicher zu betreiben. Aus diesen Gründen wurde die Explosionsausbreitung durch einen mikrostrukturierten Reaktor hindurch und die Zündung einer Gasphasenexplosion durch Hot-Spots in dem Reaktor untersucht. Die angewandten Untersuchungsmethoden sind Gegenstand aktueller Normungsaktivitäten. T2 - 13. BAM-PTB-Kolloquium zur chemischen und physikalischen Sicherheitstechnik CY - Braunschweig, Germany DA - 18.06.2013 KW - Micro Reactor KW - Explosion KW - Safety PY - 2013 SN - 978-3-95606-062-5 DO - https://doi.org/10.7795/210.20130910K SN - 1868-5838 SP - 90 EP - 98 AN - OPUS4-29849 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Heinrich, Sebastian A1 - Liebner, Christian A1 - Hieronymus, Hartmut A1 - Klemm, E. T1 - Durchführung heterogen katalysierter Selektivoxidationen im Explosionsbereich unter Einsatz von Mikrostrukturreaktoren T2 - 10. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit CY - Köthen, Deutschland DA - 2010-11-04 KW - Mikroreaktor KW - Oxidation KW - Explosion PY - 2010 SN - 978-3-89746-119-2 IS - P-03 SP - 1 EP - 6 CY - Frankfurt/M. AN - OPUS4-22359 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heinrich, Sebastian T1 - Mikrostrukturreaktoren für heterogen katalysierte Selektivoxidationen im Explosionsbereich T2 - 10. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit CY - Köthen, Germany DA - 2010-11-04 PY - 2010 AN - OPUS4-22366 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Recknagel, Sebastian A1 - Kipphardt, Heinrich A1 - Lange, Britta A1 - Hoppe, Marion T1 - Traceable analysis of impurities in metallic reference materials using GD-MS N2 - The traceabiiity requirements for certification analyses of reference materials are much more stringent than for routine analysis, where certified matrix reference materials (CRM) can be used for calibration and to establish traceabiiity. Although the ISO-Guides related to CRM production and certification are not fully clear concerning calibration, many established CRM-producers do not accept matrix-CRMs for calibration in case of certification analyses, e.g. to avoid circular reasoning. These requirements limit the methods used for certification to those that can be calibrated using Standards of known high purity and stoichiometry or mixtures of such Standards. Powerful solid sampling techniques such as glow discharge mass spectrometry (GD-MS) or spark-optical emission spectrometry (SOES), where usually compact CRMs are used for calibration, seem not be applicable for certification analyses. Especially GD-MS is a powerful tool for trace element determination of solid samples. Beside metallic impurities the use of specific gas mixtures enables also the determination of interesting nonmetallic impurities such as sulfur and phosphorus. Within BAM a calibration approach, was developed which enables to use mixtures of Standards of known high purity and stoichiometry also for GD-MS. Analogue to matrix adaption in solution based techniques, the calibration approach is based on doped pressed powder pellets. Approach and application on the certification analyses of copper and Steel CRMs are presented. T2 - CETAS 2011 - 8th International workshop on progress in analytical chemistry & materials characterisation in the steel and metal industries CY - Luxembourg, Luxembourg DA - 17.05.2011 PY - 2011 IS - OC53 SP - 361 EP - 365 AN - OPUS4-23762 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Recknagel, Sebastian A1 - Kipphardt, Heinrich A1 - Meckelburg, Angela ED - Angeli, J. T1 - Determination of nitrogen in ferritic electric heating steel ECRM 299-1 T2 - 7th International Workshop "Progress in Analytical Chemistry in the Steel and Metal Industries" CY - Luxembourg DA - 2006-05-16 PY - 2006 SN - 3-7739-6016-6 SP - 409 EP - 413 PB - VGE Verl. GmbH CY - Essen AN - OPUS4-12443 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heinrich, Sebastian T1 - Safety aspects of heterogeneously catalysed oxidations inside the explosion region in micro reactors T2 - IMRET 12 The International Conferences on Microreaction Technology CY - Lyon, France DA - 2012-02-20 PY - 2012 AN - OPUS4-25585 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heinrich, Sebastian T1 - Hot Spots als Zündquelle in Mirkoreaktoren mit Wandkatalysator T2 - Jahrestreffen Reaktionstechnik 2013 CY - Würzburg, Germany DA - 2013-05-06 PY - 2013 AN - OPUS4-28593 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kipphardt, Heinrich A1 - Recknagel, Sebastian T1 - Measurement of Nitrogen in Steel by Carrier Gas Hot Extraction - a Challenge in Calibration T2 - 6th International Workshop on progress in analytical chemistry in the steel and metals industries CY - Luxembourg, Luxembourg DA - 2002-05-14 PY - 2002 SP - 1(?) AN - OPUS4-1629 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kipphardt, Heinrich A1 - Dudzus, Thomas A1 - Meier, Klaus A1 - Recknagel, Sebastian A1 - Hedrich, Martina A1 - Matschat, Ralf T1 - The measurement of O and N by classical carrier gas hot extraction (HE) - Carrier gas hot extraction after activation with photons T2 - CENAM CY - Mexico City, Mexico DA - 2002-01-28 PY - 2002 AN - OPUS4-1610 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Matschat, Ralf A1 - Kipphardt, Heinrich A1 - Recknagel, Sebastian A1 - Noack, Siegfried ED - Abiko, K. ED - Takaki, S. T1 - Activities of Division "Inorganic Chemical Analysis; Reference Materials" of BAM in the Field of Analysis of Metals T2 - 9th international conference on ultrahigh-purity base metals CY - Sendai, Japan DA - 2002-10-14 PY - 2002 SP - 297 EP - 302 CY - Sendai AN - OPUS4-1602 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Merchel, Silke A1 - Dudzus, Thomas A1 - Ecker, Klaus A1 - Hedrich, Martina A1 - Kipphardt, Heinrich A1 - Recknagel, Sebastian T1 - Viele (BAM-) Wege führen zu den leichten Elementen T2 - 12. Jahrescolloquium "Analyse von Feststoffen unterschiedlicher Materialien aus Industrie und Umwelt" CY - Berlin, Deutschland DA - 2002-11-19 PY - 2002 SP - 1(?) AN - OPUS4-2024 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Matschat, Ralf A1 - Dudzus, Thomas A1 - Meier, Klaus A1 - Recknagel, Sebastian A1 - Kipphardt, Heinrich A1 - Hedrich, Martina ED - Hirschfeld, D. T1 - Messung von Sauerstoff und Stickstoff mit klassischer Trägergasheißextraktion und Trägergasheißextraktion nach Aktivierung mit Photonen für die nationalen primären Kalibriernormale T2 - 8. Symposium Nichtmetalle in Metallen - NIM ; 8. Tagung des Gemeinschaftsausschusses "Nichtmetalle in Metallen" der GDMB CY - Münster, Deutschland DA - 2000-03-16 PY - 2000 SN - 3-9806913-1-4 SP - 19 EP - 27 PB - GDMB, Ges. für Bergbau, Metallurgie, Rohstoff- und Umwelttechnik CY - Clausthal-Zellerfeld AN - OPUS4-915 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Recknagel, Sebastian A1 - Kipphardt, Heinrich A1 - Panne, Ulrich T1 - Certified reference materials: CRM - ERM - EURONORM T2 - Reference Materials and Interlaboratory Comparisons II CY - Medlov, Czech Republic DA - 2005-11-07 KW - CRM KW - ERM KW - ECRM PY - 2005 SN - 80-86380-30-0 SP - 7 EP - 12 PB - Cesky metrologicky institut CY - Medlov AN - OPUS4-11253 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -