TY - CONF A1 - Gräf, T. A1 - Hicke, Konstantin A1 - Heidmann, G. A1 - Kölling, M. A1 - Menge, M. A1 - Vaterrodt, K. T1 - Integrierte lokale und verteilte faseroptische Sensorik zum flächende-ckenden Online-Monitoring von Kabelanlagen und Betriebsmitteln N2 - Faseroptische Sensorsysteme bieten heute die Möglichkeit des Online-Monitorings von sensiblen, für die Energieversorgung wichtigen Betriebsmitteln. Insbesondere Hochenergiekabel, wie diese sowohl im Offshore- als auch im Onshorebereich eingesetzt werden, sind prädestiniert für eine zustandsorientierte Überwachung. Gerade Hochspannungshochenergiekabel sind Betriebsmittel, die im Falle eines Ausfalls durch Schäden mit hohen Reparatur- und Folgekosten verbunden sind. Mit dem Einsatz von faseroptischen Sensoren sind mechanische Einflüsse wie Vibrationen z. B. verursacht durch Ankerfall, Temperaturhotspots oder auch Teilentladungsaktivitäten an dezidierten vulnerablen Stellen wie Kabelendverschlüssen oder –muffen über längere Kabelstrecken detektierbar. Der Einsatz von im Rahmen des Verbundprojekts Monalisa entwickelter faseroptischer Diagnosetechnik in Verbindung mit faseroptischen Sensoren wird hier aufgezeigt. T2 - VDE Fachtagung Hochspannungstechnik CY - Online-Meeting DA - 09.11.2020 KW - Verteilte faseroptische Sensorik KW - Energiekabel KW - Zustandsüberwachung KW - Infrastrukturmonitoring KW - Eingebettete Sensorik PY - 2020 SN - 978-3-8007-5353-6 SN - 0341-3934 VL - 2020 SP - 1 EP - 6 PB - VDE Verlag GmbH CY - Berlin AN - OPUS4-51559 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kapa, Thomas A1 - Gmiha, Wajdi A1 - Heidmann, G. A1 - Vaterrodt, K. A1 - Hicke, Konstantin T1 - Verteilte faseroptische Zustandsüberwachung von Mittel- und Hochspannungskabeln N2 - Verteilte faseroptische Sensorik eignet sich sehr gut für eine Zustands- und Gefährdungsüberwachung von ausgedehnten Hochspannungskabelinstallationen. Basierend auf der Messung von verschiedenen faseroptischen Rückstreueffekten in der Sensorfaser lassen sich ortsaufgelöste Profile von Messgrößen wie Temperatur, Dehnung oder Vibrationen erzielen. Hier demonstrieren wir die Leistungsfähigkeit verschiedener faseroptischer Sensorikansätze bezüglich dieser Größen anhand von Experimenten u.a. an einem Mittelspannungskabel. Des Weiteren zeigen wir, wie die Verwendung von verschiedenen Sensorkabeltypen mit unterschiedlicher Applikation auf der Kabeloberfläche die Messergebnisse bei einem Biegeversuch beeinflussen und schlussfolgern damit auf die für die Einbettung in Kabeln geeigneten Sensoren. T2 - VDE Fachtagung Hochspannungstechnik CY - Berlin, Germany DA - 12.11.2018 KW - Verteilte Fasersensorik KW - Hochspannung KW - Monitoring PY - 2018 SN - 978-3-8007-4807-5 SN - 0341-3934 VL - 2018 SP - 1 EP - 6 PB - VDE Verlag GmbH CY - Berlin AN - OPUS4-46620 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rohwetter, Philipp A1 - Habel, Wolfgang A1 - Heidmann, G. A1 - Pepper, D. T1 - Acoustic emission from DC pre-treeing discharge processes in silicone elastomer N2 - Partial discharge in polymeric insulation of high voltage equipment causes cumulative damage that progressively deteriorates the insulation, leading to eventual failure. The electrical detection of related discharge current pulses may be challenged by electromagnetic interference from the environment. In such situations the detection of acoustic emission from partial discharge can greatly enhance its detectability, especially when electromagnetically immune fiber-optic acoustic sensors are used. During experiments involving such fiber-optic sensors that were specifically designed for the detection of partial discharge in elastomeric insulation, an unexpected type of acoustic emission was observed in silicone elastomer specimens with tip–plate electrode configurations and under DC electrical stress. We present and discuss experimental results that indicate space charge injection and subsequent spontaneous dynamical processes as the source of the detected acoustic emission. We use sensitive conventional partial discharge measurement instrumentation to show that the apparent acoustic efficiency of the processes leading to the observed acoustic emission is very high. Acoustic emission triggered by discharge events with individual apparent charge values of only a few femtocoulombs could be detected. KW - Partial discharges KW - Acoustic emission KW - Acoustic sensors KW - Insulation KW - Space charge KW - Trees-insulation PY - 2015 DO - https://doi.org/10.1109/TDEI.2014.004576 SN - 1070-9878 SN - 0018-9367 SN - 1558-4135 VL - 22 IS - 1 SP - 52 EP - 64 PB - Institute of Electrical and Electronics Engineers CY - New York, NY AN - OPUS4-32641 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Siebler, Daniel A1 - Rohwetter, Philipp A1 - Brusenbach, R. A1 - Lothongkam, Chaiyaporn A1 - Heidmann, G. A1 - Leistner, A. A1 - Plath, R. T1 - Sensitivity-enhanced detection of partial discharge in cable accessories using fluorescent polymer optical fibre-sensor N2 - A new fluorescent polymer optical fibre sensor (F-POF) has been tested in combination with different single photon counting modules in real-scale model of a translucent high voltage (HV) stress cone for the detection of inner partial discharges (PDs). In experiments with different artificial PD sources these sensors were capable to detect discharges with an apparent Charge down to the limit of a few hundred femto Coulombs even with an unfavorable sensor location. By combining the datasets of the electrical and optical PD measurement (coincidence window ±100 ns) it is possible to suppress background noise and to undoubtedly assign signals to real inner PD events. First results of an optical/optical coincident PD measurement (coincidence interval ±100 ns) including an AC phase-correlated filtering show several coincident photon counts in the ränge of 1-2 pC over the whole Observation interval, indicating the potential ofthis new alternative PD measurement and evaluation method. T2 - POF 2014 - 23nd International conference on plastic optical fibers CY - Hiyoshi, Yokohama, Japan DA - 08.10.2014 KW - Polymer optical fibre KW - Partial discharge sensor KW - Fkuorescence KW - High voltage facility PY - 2014 SP - 1 EP - 5 AN - OPUS4-32531 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Siebler, Daniel A1 - Rohwetter, Philipp A1 - Lothongkam, Chaiyaporn A1 - Habel, Wolfgang A1 - Heidmann, G. A1 - Vaterrodt, K. A1 - Leistner, A. A1 - Leistner, A. A1 - Pepper, D. A1 - Brusenbach, R. A1 - Plath, R. T1 - Empfindliche optische Detektion von Teilentladungen in transparenten und transluzenten Silikonelastomeren T1 - Sensitive optical detection of partial discharges in transparent and translucent silicone elastomers N2 - Dieser Beitrag gibt einen Überblick über den gesamten optischen Übertragungsweg vom Ursprung der Teilentladungen (TE) in Kabelgarnituren bis zur Visualisierung der TE-Messergebnisse mit einem modernen digitalen TE-Messsystem. Hierzu zählen die relevanten Materialeigenschaften der in Frage kommenden Silikonelastomere, die Verwendung fluoreszierender Lichtwellenleiter als potentialfreie Licht-Sensoren und deren minimalinvasive Integration in die hochspannungstechnische Umgebung, die hochempfindliche Wandlung optischer in elektrische Signale sowie Ansätze zur Optimierung dieser Komponenten bzw. Teilsysteme. N2 - This paper deals with optical PD detection in cable accessories containing stress cones made of Silicon elastomer. It provides a survey on the optical and electrical PD propagation path from source to detection. This includes relevant material properties of possibly suited silicone elastomers, the use of fluorescent optical fibers for PD light detection, the minimally invasive integration into HV areas, high-sensitive optical-electrical signal conversion and concepts for optimization. T2 - 6. Fachtagung Diagnostik elektrischer Betriebsmittel CY - Berlin, Germany DA - 25.11.2014 KW - Optische Teilentladungsdetektion KW - Transparente Silikonelastomere KW - Elektrische Betriebsmittel PY - 2014 SN - 978-3-8007-3648-5 SP - 1 EP - 5 PB - VDE Verlag GmbH AN - OPUS4-32532 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lothongkam, Chaiyaporn A1 - Siebler, Daniel A1 - Heidmann, G. A1 - Plath, R. A1 - Gockenbach, E. T1 - The influence of thermal aging on AC dielectric strength of transparent silicone rubbers for HV insulation N2 - Optical methods and monitoring systems for the PD detection in GIS, GIL and oil-immersed type transformers have been demonstrated. Very recently these methods have been extended to the detection of PDs in solid insulation materials of cable accessories. This novel application in high-voltage (HV) cable terminations consists of integrated fiber-optic sensor which requires transparent insulation materials. Therefore, transparent silicone rubbers are considered as replacement material for currently used opaque elastomeric insulation material in stress cones of HV cable accessories. For this purpose a preliminary study on the long-term stability of two commercially available fully transparent silicone rubbers was performed. Accelerated thermal aging tests were carried out for 4 hours up to 100 hours at 200 °C under a normal air atmosphere and normal atmospheric pressure. The impact of thermal aging on the AC dielectric strength of the silicone samples was investigated and additionally the optical transmittance was determined using UV-Vis spectrophotometer. The investigation indicated that the dielectric strength value of the silicone samples was seriously reduced for long-term exposures to elevated temperatures. In addition, the UV-visible transmittance of thermally aged silicone samples was also decreased. The influence of these phenomena must be taken into account for the design of HV insulation materials, particularly under extremely high temperature operating conditions. T2 - ISEIM 2014 - 7th International symposium on electrical insulating materials CY - Niigata City, Japan DA - 01.06.2014 KW - AC dielectric strength KW - Thermal aging KW - Silicone elastomer KW - HV insulation KW - Silicone rubbers KW - Optical transmittance KW - Rubber stress cone PY - 2014 DO - https://doi.org/10.1109/ISEIM.2014.6870790 SP - 346 EP - 349 PB - IEEE AN - OPUS4-32533 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rohwetter, Philipp A1 - Lothongkam, Chaiyaporn A1 - Heidmann, G. A1 - Habel, Wolfgang T1 - Fibre-optic acoustic emission sensors for high voltage environments N2 - This contribution introduces ultrasonic fibreoptic sensors that were originally designed for detecting degradative processes in elastomeric insulations of high voltage cable accessories. This application requires sensor performance comparable to the most sensitive conventional piezoelectric acoustic emission sensors, however adding demanding constraints imposed by the high voltage environment. The sensors developed with this speciftc application in mind may, however, find uses also in different areas of testing and monitoring, where the presence of strong magnetic or electromagnetic ftelds prevent the use of conventional acoustic emission sensors. T2 - 31st Danubia-Adria Symposium on advances in experimental mechanics CY - Kempten, Germany DA - 24.09.2014 PY - 2014 SN - 978-3-00-046740-0 SP - 122 EP - 123 AN - OPUS4-32460 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rohwetter, Philipp A1 - Lothongkam, Chaiyaporn A1 - Habel, Wolfgang A1 - Heidmann, G. A1 - Pepper, D. ED - López-Higuera, J.M. ED - Jones, J. ED - López-Amo, M. ED - Santos, J.L. T1 - Improved fibre-optic acoustic sensors for partial discharge in elastomeric insulations N2 - Partial discharge in elastomeric high voltage insulations is a major reason for device failure. The special challenges of the high voltage environment limit the use of conventional acoustic emission sensors. Fibre-optic sensors can cope with these challenges thanks to their optical sensing principle and the use of all-dielectric materials. In this contribution, improvements to a previously introduced design of ultrasonic fibre-optic acoustic partial discharge sensors for elastomeric insulations are presented. The improved performance of fibre-optic acoustic sensors in detecting AC partial discharge is demonstrated. Furthermore, their ability to detect low-level damage processes in elastomeric insulation under DC dielectric stress is shown to outperform the highly sensitive electrical detection method. T2 - OFS2014 - 23rd International conference on optical fibre sensors CY - Santander, Spain DA - 02.06.2014 KW - Partial discharge KW - Acoustic emission KW - Dielectric ageing KW - Silicone elastomer KW - Stress cone KW - High voltage cable accessories PY - 2014 DO - https://doi.org/10.1117/12.2059489 SN - 0277-786X SN - 1996-756X N1 - Serientitel: Proceedings of SPIE – Series title: Proceedings of SPIE VL - 9157 SP - 91571J-1 EP - 91571J-4 AN - OPUS4-32444 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rohwetter, Philipp A1 - Lothongkam, Chaiyaporn A1 - Habel, Wolfgang A1 - Heidmann, G. A1 - Pepper, D. T1 - Verbesserte faseroptisch-akustische Teilentladungssensoren für elastomere Isolierungen T1 - Improved fibre-optic acoustic partial discharge sensors for elastomeric insulations N2 - Von uns entwickelte faseroptisch-akustische Sensoren wurden an Modellen für innere Teilentladungen (TE) in Silikonelastomer- Isolierungen erprobt. Bei 32 mm Abstand zu einer eingebetteten TE-Quelle wurde eine äquivalente Empfindlichkeit im Bereich weniger Picocoulomb scheinbarer Ladung erreicht. In einem Versuchsaufbau mit künstlicher TEQuelle, der durch Geometrie und Material ein Hochspannung-Aufschiebeelement simuliert, wurde bei akustisch gewollt ungünstiger Sensorplatzierung ein TE-Detektionslimit von 35 pC scheinbarer Ladung ermittelt. Neben der Leistungsfähigkeit der vorgestellten Sensoren in Bezug auf die Detektion von Wechselspannungs-TE wurde auch ihre Fähigkeit geprüft, Gleichspannungs-TE im elastomeren Isolierstoff zu detektieren. Dabei hat sich gezeigt, dass die akustische Methode bei Gleichspannung ein unerwartet empfindliches Werkzeug zum Aufspüren TE-behafteter Fehlstellen sein kann. N2 - Fibre-optic acoustic sensors developed by us for the detection of partial discharge (PD) in silicone elastomer insulation were tested using artificial embedded sources of PD. Few-Picocoulomb sensitivity was shown for a Separation of 32 mm between PD source and sensor. Additionally, sensor detectivity was investigated on a Setup simulating geometry and material of a real-scale push-on high voltage stress cone. An intentionally unfavourably placed sensor showed an equivalent detection limit of 35 pC apparent Charge. Besides testing sensing performance with respect to AC-PD, also the acoustic detection DC-PD in elastomeric insulation was investigated. This lead to the observation that the acoustic method is an unexpectedly sensitive tool for detecting PD -inducing defects in such materials under DC stress. T2 - 6. ETG-Fachtagung - Diagnostik elektrischer Betriebsmittel 2014 CY - Berlin, Germany DA - 25.11.2014 PY - 2014 SN - 978-3-8007-3648-5 SN - 0341-3934 N1 - Serientitel: ETG-Fachbericht – Series title: ETG-Fachbericht VL - 144 SP - 1 EP - 6 PB - VDE Verlag GmbH AN - OPUS4-32873 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Siebler, Daniel A1 - Lothongkam, Chaiyaporn A1 - Rohwetter, Philipp A1 - Habel, Wolfgang A1 - Heidmann, G. T1 - Fluorescent fiber optical partial discharge sensor in high-voltage cable facilities N2 - New sensors for the detection of partial discharges (PDs) in high-voltage (HV) cable accessories are being de-veloped consisting of a fluorescent polymer optical fiber (F-POF) as sensing element. Depending on the fiber material F-POFs can be attached to and even integrated into the translucent silicone rubber insulation of HV cable terminations. As the embedment into the insulation material plays an important role, the sensor should not weaken the dielectric strength of the insulation material and should not be the origin of PD incidents. A sensor consisting of a commercial F-POF has been tested in the high-voltage lab regarding its PD detection ability un-der AC in comparison to a conventional electrical sensor. New silicone rubber F-POF (Si-F-POF) fiber models functionalized with coumarin dyes have been produced. The optical properties of these dye functionalized silox-anes are presented. These potential sensor fibers are highly flexible and might be embeddable at medium to high-voltage level. An additional way to further improve the level of PD light detection is to modify the translucent type of silicone rubber used in HV cable accessories in terms of optical transparency. In this context we present our first results of the optical and mechanical properties of new elastomeric transparent silicone materials specif-ically designed for the application as HV insulation materials in stress cones. T2 - POF 2013 - 22nd International conference on plastic optical fibers CY - Búzios, Rio de Janeiro, Brazil DA - 11.09.2013 KW - Polymer optical fiber KW - Fluorescence sensor KW - Partial discharge monitoring KW - High-voltage power cable KW - Silicone rubber KW - Fluorescence dye KW - Nanoparticles PY - 2013 SP - 322 EP - 327 CY - Rio de Janeiro, Brazil AN - OPUS4-30266 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Siebler, Daniel A1 - Rohwetter, Philipp A1 - Heidmann, G. A1 - Nierhaus, T. A1 - Simunek, J. A1 - Leistner, A. A1 - Leistner, A. A1 - Plath, R. T1 - Kabelgarnituren mit integrierter faseroptischer Teilentladungssensorik T1 - Cable accessories with integrated fibre-optic partial discharge sensors N2 - Wir demonstrieren die Machbarkeit rückwirkungsfrei integrierter optischer Teilentladungssensorik für Aufschiebeelemente aus Silikonelastomer zur Verwendung in Kabelgarnituren. Zu diesem Zweck wurden sowohl ein Funktionsmodell eines optisch transparenten Silikon-Kabelendverschlusses mit integriertem Silikon-Lichtwellenleitersensor als auch ein rein optisches TE-Messsystem auf Basis von zwei Einzelphotonendetektoren und einer Koinzidenzschaltung (PD-COP) entwickelt, die hier vorgestellt werden. Die Leistungsfähigkeit und Stärken der optischen TE-Messtechnik zeigen sich sowohl in Kombination mit der elektrischen Messtechnik, als auch bei alleinigem Einsatz. T2 - VDE Fachtagung Hochspannungstechnik CY - Berlin, Germany DA - 14.11.2016 KW - Faseroptik KW - Teilentladungssensorik KW - Fibre-optic KW - Partial discharge sensors PY - 2016 SN - 978-3-8007-4310-0 SP - 608 EP - 613 PB - VDE Verlag GmbH CY - Berlin AN - OPUS4-38976 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -