TY - CONF A1 - Heckel, Thomas T1 - Ermittlung der Fehlerauffindwahrscheinlichkeit (POD) in Abhängigkeit von der Prüfrastergröße bei der Ultraschallprüfung großer Schmiedestücke mittels Simulation und Experiment T2 - DACH CY - Salzburg DA - 2015-05-11 PY - 2015 AN - OPUS4-34021 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas T1 - Influencing factors on the inspection performance of wheel axle sets under training conditions T2 - DACH CY - Salzburg DA - 2015-05-11 PY - 2015 AN - OPUS4-34022 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Casperson, Ralf A1 - Heckel, Thomas T1 - New evaluation methods for non-destructive rail inspection using eddy current and ultrasound N2 - Since 1999 there has been a continuous development of non-destructive head check inspection. Especially in case of modern rail inspection systems, high demands on a fast, detailed detection and classification of defects called for improved testing methods. Due to the large amount of different rail types and profiles, the adaptation and optimization of algorithms is still in progress. Additional data analysis is under devel-opment for combined eddy current and ultrasonic inspection methods. This presentation gives an over-view of further enhancement and linking of testing systems as well as data processing. Main foci of the development are an improved sensitivity and an increased reliability of the testing results. Also, addi-tional information can be obtained like determination of local hardness and roughness of the rail as well as an enhanced resolution for locating of defects which will be part of the presented work. T2 - Railway Engineering-2017 CY - Edinburgh, UK DA - 21.06.2017 KW - Eddy current testing KW - Ultrasonic testing KW - Rail inspection KW - Data evaluation KW - Classification PY - 2017 SN - 0-947644-83-0 DO - https://doi.org/10.25084/raileng.2017.0078 SP - 1 EP - 10 AN - OPUS4-40767 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas T1 - New standard propopsal for determination of steel cleanliness using high frequency ultrasonic testing N2 - Due to the market needs on steel for high demanding applications non-destructive methods for the determination of steel cleanliness using ultrasound have to be adapted to increase sensitivity respectively. The basic idea is that the new standard proposal should follow the basic line outs from SEP 1927 and ASTM E588. Additional to these relatives the standard should be open to different types of specimen and inspection frequencies to cover a wide range from bars, rings and plates as well as different inspection sensitivities. For an enhance in resolution the standard draft focuses on immersion focal beam probes which should be selected according to the geometry of the specimen. The selection should be proved with the aid of simulation tools. The frequency shall be at least 10 MHz. For specimen thicknesses of less than 6 mm a frequency of at least 25 MHz shall be used. Calibration procedures had to be improved significantly compared to the old standards to allow proper sizing of indications. Therefore calibration procedures shall take signal processing into account. For detailed evaluation of the amplitude dependency and for calibration a reference block with a sufficient number of reflectors has to be used. The recorded echo height shall be directly transferred into an equivalent disc shaped reflector EDSR by a distance amplitude curve. The novelty in this standard draft will be that based on 3D measurements and 3D evaluation the amplitude criterion of an indication becomes just one among some other criteria. This standard takes the signal amplitude, signal amplitude distribution and signal travel time for classification into account. The standard draft will be open to the definition of the volume to be investigated to be set by the user. This will make evaluation more comparable to other methods because the inspected area has to be user defined. We recommend CEN/TC 138 to decide on a work item for this proposal to become an EU and an ISO standard using Vienna agreement. The research leading to these results has received funding from the European Union's Research Fund for Coal and Steel (RFCS) research programme under grant agreement n° RFSR-CT-2013-00014. T2 - QNDE 2017 CY - Provo, UT, USA DA - 17.07.2017 KW - Standardisation KW - Ultrasound KW - Steel cleanliness PY - 2017 AN - OPUS4-41148 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Boehm, Rainer A1 - Heckel, Thomas T1 - Simulation of sparse matrix array designs N2 - Matrix phased array probes become more and more prominent to be used in industrial applications. The main drawbacks, using probes incorporating a very large number of transducer elements, are the needs for an appropriate cabling and an ultrasonic device offering many parallel channels. Matrix arrays designed for extended functionality feature at least 64 or more elements. Typical arrangements are square matrices, e.g. 10 by 10 or 11 by 11 or rectangular matrices, e.g. 8 by 16 or 10 by 12 to fit a 128-channel phased array system. In some phased array systems, the number of simultaneous active elements is limited to a certain number, e.g. 32 or 64. Those setups do not allow to run the probe with all elements active which may cause a significant change in the directivity pattern of the resulting sound beam. When only a subset of elements is possible to use during a single acquisition, different strategies may be applied to collect enough data for rebuilding the missing information from the echo signal. Omission of certain elements may be one approach, overlay of subsequent shots with different active areas may be another one. This paper presents the influence of decreased number of active elements on the sound field and their distribution on the array. An example for 16 active elements out of 121 is given in Figure 1. The sound field divergence and its shape basically remain the same, while the sensitivity is reduced and the amplitudes of the speckle-like side lobes increase significantly. Solutions using subsets with different element activity patterns on matrix arrays and their advantages and disadvantages concerning the sound field are evaluated using semi-analytic simulation tools. Sound field criteria regarding the consequences for NDT test results and the system setup are discussed. T2 - QNDE 2017 CY - Provo, UT, USA DA - 17.07.2017 KW - Ultrasound KW - Sparse array KW - Simulation PY - 2017 AN - OPUS4-41149 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas T1 - Signal processing for non-destructive testing of railway tracks N2 - Increased speed, heavier loads, altered material and modern drive system concepts result in an increasing number of flaws in railways. Caused by the rapid change in damage mechanism by modern rolling stock the appearance of the flaws also alters. Hence, interpretation of non-destructive rail testing results may become difficult. Caused by the changed interplay between detection method and flaw the recorded signals will result in an unknown type for the rail flaws type classification. Methods for automatic rail inspection according to defect detection and classification have been developed continuously. Signal processing is a key technology to master the challenge of classification and maintain resolution and detection quality independently of operation speed. The basic ideas of signal processing based on the Glassy-Rail-Diagram for classification purposes will be presented. Examples for the detection of damages caused by rolling contact fatigue are given. Synergetic effects of combined evaluation of diverse inspection methods are shown. T2 - QNDE 2017 CY - Provo, UT, USA DA - 17.07.2017 KW - Rail testing KW - Signal processing KW - Ultrasound PY - 2017 AN - OPUS4-41150 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas T1 - Non-Destructive ultrasonic investigations on FRP structures N2 - Components made of fibre-reinforced plastic are a prominently used material in modern safety-relevant structures. Periodic in-service non-destructive inspection of these structures is necesary. The EMRP-funded project VITCEA aims on the evaluation of the performance of various non-destructive testing methods on the inspection of fibre-reinforced plastics. The physical layout of fibre layers leads to complex structures of fibre-reinforced plastic parts. Furthermore different material properties of the fibre and the resin cause anisotropic behaviour of the material.This poses a challenge for ultrasonic NDT by causing a complex acoustical response. The acoustical behaviour of fibre-reinforced plate materials has been simulated. Specimens with artificial flaws for the evaluation of the detection thresholds have been designed and manufactured. Mechanized ultrasonic testing methods using phased-array sensors, air-coupled transducers, immersion tank testing and contact technique have been evaluated on the specimen. In this talk results of different ultrasonic testing methods will be compared and discussed. T2 - VITCEA Steakholder Workshop CY - NPL, London, UK DA - 7.6.2017 KW - FRP KW - Fiber reinforced platic KW - Ultrasound KW - Matrix array KW - ACUT KW - Air coupled KW - Non-destructive testing PY - 2017 AN - OPUS4-41153 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Boehm, Rainer A1 - Heckel, Thomas T1 - Schnelle Ultraschallprüfung von längsgebohrten Eisenbahnradsatzwellen mit Phased Array Rotationsscanner N2 - Im Rahmen des Europäischen Projektes RAAI* wird speziell für längsgebohrte Eisenbahnradsatzwellen von Hochgeschwindigkeitszügen eine Phased Array Technik angepasst, mit dem Ziel einer nahezu 100%igen Rissprüfung (Tiefe 2-3 mm) ohne die Demontage der Wellen und einer Prüfzeitreduzierung von 75%. Die Technik arbeitet mit einem Phased Array, bei dem die Schwingerelemente auf einem Kegelstumpf angeordnet sind. Für die Abtastung in Umfangsrichtung erlaubt das Phased Array die schnelle Rotation und zusätzlich das Fokussieren und Schwenken des Schallbündels. In Richtung der Achse wird das Prüfkopfsystem mechanisch bewegt. In vorangegangenen Projekten ist das Prinzip dieser Prüftechnik entwickelt und die Tauglichkeit gezeigt worden. Die jetzigen Arbeiten haben insbesondere die Optimierung der Sensortechnik an die o.g. Aufgabe zum Ziel. Wegen der ungewöhnlichen Geometrie des Arrays sind umfangreiche Simulationsrechnungen nötig, um die Auswirkung von zahlreichen Parametern auf die Schallfeldform und letztlich auf die Empfindlichkeit und die Ortsauflösung zu untersuchen und die Konstruktionsdaten zu bestimmen. Zur Validierung der Prüftechnik werden Tests an typischen Eisenbahnradsatz-wellen durchgeführt. Der Einsatz von unterstützenden Signalverarbeitungsalgorith-men bei der Auswertung der Prüfergebnisse zur sichereren Fehlererkennung ist u.a. wegen des möglichen geringen Messpunktabstandes für diese Prüftechnik besonders vielversprechend. Der Stand der Entwicklung wird gezeigt. T2 - DGZfP Jahrestagung 2017 CY - Koblenz, Germany DA - 22.05.2017 KW - Phased array KW - Radsatzwellen KW - Ultraschall KW - Kegelarray KW - Eisenbahnradsatz KW - Innenprüfung KW - ZfP KW - Bahn KW - Kegel KW - Innenbohrung KW - Prüfung PY - 2017 AN - OPUS4-41154 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas T1 - Digitale Signalverarbeitung von Ultraschallmessdaten T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Germany DA - 2010-05-10 PY - 2010 AN - OPUS4-21755 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas T1 - Outcome of the Cologne Accident Investigation T2 - WOLAXIM-Project Kickoff-Meeting CY - Cambridge, England DA - 2010-11-22 PY - 2010 AN - OPUS4-22816 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas T1 - The Glassy Rail - Advanced Ultrasonic Rail Inspection T2 - IEEE International Ultrasonics Symposium CY - Rome, Italy DA - 2009-09-20 PY - 2009 AN - OPUS4-19951 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas T1 - High Speed Non-Destructive Rail Testing with Advanced Ultrasound and Eddy-Current Testing Techniques T2 - 5th International Workshop Non-Destructive Testing in Progress CY - Prague, Czech Republic DA - 2009-10-12 PY - 2009 AN - OPUS4-20156 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Armbruster, R. A1 - Heckel, Thomas A1 - Fenger, S. T1 - Die gläserne Schiene - Fortgeschrittene Ultraschall-Schienenprüfung KW - Ultraschall KW - Wirbelstrom KW - Zerstörungsfreie Prüfung (ZfP) KW - Schienenprüfung KW - Signalverarbeitung PY - 2010 SN - 1616-069X SN - 0948-5112 VL - 121 SP - 65 EP - 68 PB - Deutsche Gesellschaft für Zerstörungsfreie Prüfung CY - Berlin AN - OPUS4-23254 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Heckel, Thomas A1 - Kreutzbruck, Marc A1 - Montag, Hans-Joachim A1 - Fenger, S. T1 - The glassy rail: advanced ultrasonic rail inspection PY - 2010 SN - 0976-254X VL - 1 IS - 5 SP - 16 EP - 19 PB - Headliners Advertising Services Pvt. Ltd. CY - Kolkata, India AN - OPUS4-23269 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas T1 - Verbesserung der zerstörungsfreien Prüfung vor Ort durch den Einsatz bildgebender Verfahren T2 - Wissenschaft trifft Handwerk CY - Berlin, Germany DA - 2010-09-22 PY - 2010 AN - OPUS4-23497 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas T1 - Verbesserung der zerstörungsfreien Prüfung vor Ort durch den Einsatz bildgebender Verfahren T2 - Wissenschaft trifft Handwerk CY - Leipzig, Germany DA - 2011-03-15 PY - 2011 AN - OPUS4-23498 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas T1 - Neue Prüftechnik für den Schienenprüfzug, Erfahrungen, Fehlerbilder, Auswerttechniken T2 - DGZfP-Jahrestagung CY - Münster, Germany DA - 2009-05-18 PY - 2009 AN - OPUS4-19527 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas T1 - New Developments for Non-Destructive Rail Testing T2 - Railway Engineering CY - London, England DA - 2009-06-24 PY - 2009 AN - OPUS4-19585 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas A1 - Rühe, S. A1 - Hintze, H. A1 - Armbruster, R. T1 - Neue Prüftechnik für den Schienenprüfzug - Erfahrungen, Fehlerbilder, Auswertetechniken T2 - DGZfP-Jahrestagung 2009 CY - Münster, Deutschland DA - 2009-05-18 KW - Schienenprüfzug PY - 2009 SN - 978-3-940283-16-0 IS - DGZfP-BB 115 ( Di.2.B.4) SP - 1 EP - 7 AN - OPUS4-20511 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Laible, Patrick A1 - Heckel, Thomas T1 - Quantitative Risstiefenbestimmung an Eisenbahnschienen mit Ultraschall N2 - Die Detektion von Rissen in Eisenbahnschienen erfolgt mit Hilfe von Ultraschall- und Wirbelstromprüftechniken. Zur Verbesserung der Aussage der Tiefenbestimmung von zur Fahrfläche hin geöffneten tiefen Rissen wurde von der BAM ein entsprechender Lösungsansatz erarbeitet und im Labormaßstab erprobt. Eine spezielle Sender-Empfänger-Anordnung ermöglicht in Verbindung mit einer auf der TOFD-Technik basierenden Datenerfassung mit anschließender Laufzeitanalyse des Signals die Bestimmung von Risstiefen bis 30 mm. T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Deutschland DA - 2010-05-10 PY - 2010 SN - 978-3-940283-26-9 IS - DGZfP-BB 122 (P66) SP - 1 EP - 6 CY - Berlin AN - OPUS4-21885 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas T1 - Teilmechanisiertes Handprüfsystem für Radsatzwellen mit Längsbohrung auf Basis der Gruppenstrahlertechnik T2 - DGZfP-Jahrestagung CY - Rostock, Germany DA - 2005-05-02 PY - 2005 AN - OPUS4-7318 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas T1 - UT1-M2-Ausbildung für die mechaniesierte Ultraschallprüfung T2 - DGZfP-Jahrestagung CY - Rostock, Germany DA - 2005-05-02 PY - 2005 AN - OPUS4-7319 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Erhard, Anton A1 - Heckel, Thomas A1 - Schenk, Gottfried A1 - Hintze, H. T1 - Laufende Instandhaltung von Schienenfahrzeugen - Einsatz der Gruppenstrahlertechnik zur Radsatzprüfung N2 - Zur Gewährleistung des sicheren Betriebs von Schienenfahrzeugen werden bei der laufenden Instandhaltung die Radsätze (Laufräder und Radsatzwellen) mittels Ultraschall auf Fehlerfreiheit geprüft. Auf Grund der Komplexität der durchzuführenden Prüfungen an der Radscheibe von scheibengebremsten Fahrzeugen ist beim Einsatz konventioneller Techniken eine große Anzahl Ultraschallprüfköpfe erforderlich, deren Reduzierung eine technische Herausforderung darstellt. Auch bei der Prüfung von Radsatzvollwellen sind auf Grund der eingeschränkten Zugänglichkeit unterschiedliche Winkelprüfköpfe erforderlich. Ein Ziel der Untersuchungen bestand darin, die Anzahl der erforderlichen konventionellen Prüfköpfe deutlich zu reduzieren. Dazu kann die Gruppenstrahlertechnik einen Beitrag leisten. KW - Ultraschall- und Wirbelstromprüfung KW - Radsätze von Personenverkehrszügen und Schienen PY - 2004 DO - https://doi.org/10.3139/120.100560 SN - 0025-5300 VL - 46 IS - 1-2 SP - 40 EP - 45 PB - Carl Hanser Verlag CY - München AN - OPUS4-2654 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Tscharntke, Dirk A1 - Heckel, Thomas A1 - Boehm, Rainer A1 - Erhard, Anton A1 - Krull, R. A1 - Lützner, J. A1 - Hintze, H. ED - Forde, M. C. T1 - Development of ultrasonic railway inspection systems using phased array methods T2 - 6th Railway Engineering Conference CY - London, England, UK DA - 2003-04-30 KW - NDT KW - Ultrasonic KW - Phased array KW - Railway KW - Inspection KW - Directivity pattern KW - Crack analysis/sizing PY - 2003 SN - 0-947644-51-2 PB - Engineering Technics Press CY - Edinburgh AN - OPUS4-2487 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas T1 - Entwicklungstendenzen bei der Gruppenstrahlertechnik T2 - 4. Fachtagung ZfP im Eisenbahnwesen CY - Wittenberge, Germany DA - 2006-03-21 PY - 2006 AN - OPUS4-12247 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas T1 - Ultrasonic testing with matrix arrays, applications in non-destructiv testing T2 - 9th European Conference on Non-Destructive Testing (ECNDT) CY - Berlin, Germany DA - 2006-09-25 PY - 2006 AN - OPUS4-12633 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas A1 - Brekow, Gerhard A1 - Mrasek, Heinz T1 - Ultrasonic Testing With Matrix Arrays, Applications in Non-Destructive Testing T2 - 9th European Conference on NDT CY - Berlin, Germany DA - 2006-09-25 KW - Operational principles KW - Ultrasound hardware KW - Probe description KW - Examples for application PY - 2006 SN - 3-931381-86-2 SP - 1(?) EP - 7(?) PB - European Federation for Non-Destructive Testing CY - Berlin AN - OPUS4-14060 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Tessaro, Ute A1 - Heckel, Thomas A1 - Boehm, Rainer A1 - Guichard, Marcel A1 - Mrasek, Heinz A1 - Brekow, Gerhard T1 - Ultrasonic Testing of Railway Axles from a Borehole in Axial Direction T2 - 9th European Conference on NDT CY - Berlin, Germany DA - 2006-09-25 KW - Phased array technique KW - Surface breaking cracks KW - Railway axles with a bore hole in axial direction KW - Modelling calculations PY - 2006 SN - 3-931381-86-2 SP - 1(?) EP - 7(?) PB - European Federation for Non-Destructive Testing CY - Berlin AN - OPUS4-14062 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Klinger, Christian A1 - Bettge, Dirk A1 - Häcker, Ralf A1 - Heckel, Thomas A1 - Gohlke, Dirk ED - Pohl, M. T1 - Schadensanalyse zum Radsatzwellenbruch ICE3 T2 - DGM-Tagung Werkstoffprüfung 2010 CY - Neu-Ulm, Deutschland DA - 2010-12-02 KW - Radsatzwellenbruch KW - Nichtmetallische Einschüsse KW - Reinheitsgrad KW - Ultraschall-Hohlwellenprüfung PY - 2010 SP - 235 EP - 239 AN - OPUS4-23855 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Klinger, Christian A1 - Bettge, Dirk A1 - Häcker, Ralf A1 - Heckel, Thomas A1 - Gohlke, Dirk A1 - Klingbeil, Dietmar T1 - Schadensanalyse zum Radsatzwellenbruch ICE3 N2 - Am 9. Juli 2008 entgleiste ein Hochgeschwindigkeits-Triebzug der Baureihe 403, ICE3, bei der Ausfahrt aus dem Kölner Hauptbahnhof. Ursache dafür war der Schwingbruch einer Radsatzwelle. Im Auftrag der Staatsanwaltschaft Köln untersuchte die BAM die Schadensteile, insbesondere die gebrochene Treibradsatz-Hohlwelle. Zunächst wurden das Drehgestell, der Antriebsstrang, die Räder, die Bremsen und die gebrochene Radsatzwelle visuell untersucht und deren Zustand dokumentiert. Anschließend erfolgte die zerstörungsfreie Prüfung der beiden Bruchstücke der Hohlwelle mit teilmechanisierter Ultraschall-Handprüfung. Vor der Zerlegung der Radsatzwelle wurden ausgewählte Maße kontrolliert und die Oberfläche eingehend untersucht. Nach der Probenahme und Präparation wurden die relevanten spezifizierten Eigenschaften des Wellenwerkstoffs überprüft. Mittels Bruchflächenanalyse konnte die Startstelle des Schwingrisses lokalisiert, aufgrund der starken Sekundärschäden auf der Bruchfläche und an den Bruchkanten jedoch nicht direkt ausgewertet werden. Durch die Kombination von Mikro-Computertomographie und Ultraschall-Tauchtechnik wurden u. a. nahe der Schwingriss-Startstelle Inhomogenitäten erkannt, die durch metallographische Zielpräparation als nichtmetallische Einschlüsse identifiziert wurden. Die Größe dieser Einschlüsse ist gemäß gefordertem Reinheitsgrad unzulässig. Vergleichbare Einschlüsse in diesem hochbeanspruchten Bereich der Radsatzwelle haben vermutlich den Schwingriss initiiert. T2 - 43. Tagung des DVM-Arbeitskreises Bruchvorgänge - Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen CY - Rostock, Germany DA - 22.02.2011 KW - Radsatzwellenbruch KW - Nichtmetallische Einschlüsse KW - Reinheitsgrad KW - Ultraschall-Hohlwellenprüfung KW - Railway axle KW - Fatigue crack KW - Root cause KW - Cologne accident PY - 2011 SP - 1 EP - 6 AN - OPUS4-25275 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas T1 - Prüfung von Eisenbahnschienen mit dem Schienenprüfzug bei hohen Geschwindigkeiten bis 20 m/s T2 - Bahntechnik-Symposium 2011 CY - Berlin, Germany DA - 2011-12-09 PY - 2011 AN - OPUS4-25255 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -