TY - CONF A1 - Casperson, Ralf A1 - Friedrich, Alexander A1 - Heckel, Thomas A1 - Zhang, Tianyun T1 - Verwendung von DICONDE bei der Eisenbahn-Schienenprüfung N2 - Bei der zerstörungsfreien Prüfung verlegter Eisenbahnschienen werden die Rohdaten derzeit in proprietären Datenformaten gespeichert und auf Datenträgern zwischen den Prüfzügen und den auswertenden Stellen versendet. Die proprietären Datenformate sind in der Regel nur den Herstellern der Prüfsysteme bekannt und deren Dokumentation nicht allgemein zugänglich. Die „Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation“ (DICONDE), basierend auf dem medizinischen Standard „Digital Imaging and Communication in Medicine“ (DICOM), ermöglicht es, sowohl Prüfdaten als auch Prüfergebnisse und Streckeninformationen in einem standardisierten Format zu speichern und zwischen verschiedenen Endpunkten zu übertragen. Das Poster gibt zunächst einen kurzen Überblick über die hierarchische Struktur von DICONDE und zeigt dann, wie DICONDE bei der Prüfung verlegter Eisenbahnschienen verwendet werden kann. Die geometrischen Besonderheiten (mehrere Kilometer Länge pro Prüffahrt, kurviger Streckenverlauf) stellen dabei eine besondere Herausforderung dar. Im Rahmen des mFUND-geförderten Projektes „Arteficial Intelligence for Railway Inspection (AIFRI)“, Förderkennzeichen 19FS2014C, wurde ein Vorschlag für eine Erweiterung des DICONDE-Standards für die Schienenprüfung erarbeitet und bei der ASTM eingereicht. T2 - DGZfP Jahrestagung 2024 CY - Osnabrück, Germany DA - 05.05.2024 KW - DICONDE KW - Eisenbahn KW - Schienenprüfung PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-600204 DO - https://doi.org/10.58286/29500 SP - 1 EP - 5 PB - NDT.net AN - OPUS4-60020 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wack, Yannick A1 - Heckel, Thomas A1 - Boehm, Rainer A1 - Brackrock, Daniel T1 - Simulation der Schallausbreitung in Eisenbahnschienen mit FEM und SAM N2 - Die Simulation von Ultraschallausbreitung ist ein wesentliches Hilfsmittel zur Optimierung von Prüfanordnungen und wird zunehmend in der Prüfvorbereitung eingesetzt. Eisenbahnschienen sind Bauteile mit komplexer Geometrie und im eingebauten Zustand eingeschränkter Zugänglichkeit. Bei der Prüfung im Feld entstehen aus der Schienengeometrie komplexe Echosignale mit Formanzeigen, die schwer zu interpretieren sind. Für das bessere Verständnis der Schallausbreitung in der Eisenbahnschiene wird diese in einem ersten Schritt mit Hilfe verschiedener Ansätze modelliert. Hierbei werden Finite Elemente Methoden und semi-analytischen Modelle verwendet. In einem zweiten Schritt werden die Ergebnisse der Simulationsmodelle einander gegenübergestellt und mit Messungen an realen Schienen verglichen. Ziel dieser Untersuchungen ist die Validierung von Simulationsverfahren mit Hilfe von Messdatensätzen und Überprüfung der Anwendbarkeit bei der Bewertung von Ergebnissen der Schienenprüfung. T2 - DGZfP-Jahrestagung 2018 CY - Leibzig, Gemany DA - 07.05.2018 KW - Ultraschall KW - FEM KW - Eisenbahn KW - Simulation KW - SAM PY - 2018 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-474585 SP - Poster 4 - 1 EP - 5 PB - Deutsche Gesellschaft für zerstörungsfreie Prüfung e.V. (DGZfP) AN - OPUS4-47458 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas A1 - Perez Alonso, M. T1 - Is there a need for a new standard for determination of steel cleanliness using high frequency ultrasonic testing? N2 - Increased use of high performance steel (HPS) for demanding applications calls for non-destructive ultrasonic testing methods which is covered by standards like SEP 1927 (1) and ASTM E588 (2). Here, an adaption of standards like increasing sensitivity and resolution of ultrasonic testing may be needed in order to improve determination of steel cleanliness. Modern requirements on standardization in that field have been evaluated during the INCAFAT project “A novel approach for rating fatigue-initiating inclusions in highly demanding steel” which was funded by the European Commission. Main results of this research show that an adapted standard should be open to different type of specimen due to the diversity in application. This includes a wide range from bars, rings and plates as well as different inspection sensitivities. An adapted standard should be open to the definition of the volume to be investigated and open to be selected by the user. Furthermore, for enhanced resolution the frequency range should be extended to higher frequencies. The use of focal beam probes shall be mandatory and probes should be selected according to the geometry of the specimen. Therefore, calibration procedures have to be improved significantly to allow proper sizing of indications. Indication height shall be directly transferred into an equivalent disc shaped reflector taking distance amplitude curves as well as signal amplitude distribution and signal travel time into account. A new standard draft proposal taking all these requirements into account has been filed in the frame of the INCAFAT project and is now on discussion. T2 - ECNDT - European Conference on Non-Destructive Testing 2018 CY - Gothenburg, Sweden DA - 11.06.2018 KW - Cleaniliness purity grade ultrasound non-destructive volumetric measurement standard PY - 2018 AN - OPUS4-47210 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas T1 - Is phased array the future in modern ultrasonic rail inspection? N2 - Compared to standard ultrasonic testing methods the application of phased arrays offers advantages and flexibility by the electronic steering possibilities to control the transmitted and received sound fields as well as the image based evaluation of the recorded scans. For more than one decade phased array systems have been introduced and used in the railway sector for the inspection of wheelsets in the workshops. Up to the present field applications of phased array systems in rail inspection are rather rare. On the other hand a lot of scientific work on rail testing using phased arrays has been carried out in the recent past. Mechanized ultrasonic rail inspection poses strong challenges e.g. due to the harsh environment, complex flaw types and high inspection speeds. Different tasks have to be carried out by non-destructive testing ranging from manufacturing inspection of thermite welds to in-service inspection for operational induced flaws in the rail head, rail web and rail foot as well as rolling contact fatigue. This work will give an overview and categorization of different present approaches for rail testing using phased array. Phased array systems typically offer digital image based inspection results. This make these systems become the perfect candidates to feed inspection data into a modern big data based workflow, using e.g. cloud computing, signal processing and data fusion for recording, positioning and tracking of flaws and artefacts in rails and to gain additional benefit. Evaluation of promising innovative approaches and solutions for phased array based ultrasonic rail inspection in the frame of “Industry 4.0” will be discussed. T2 - QNDE - Annual Review of Progress in Quantitative Nondestructive Evaluation CY - Burlington, VT, USA DA - 15.07.2018 KW - Rail Inspection Phased Array Ultrasound PY - 2018 AN - OPUS4-47211 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas T1 - Comparison of the performance of ultrasonic non-destructive testing methods on inspection of fibre reinforced plastics N2 - In the last twenty years, components made of fibre-reinforced plastic became a prominently used material in safety-relevant structures. Periodic in-service inspection of these structures using reliable non-destructive testing methods became a relevant issue in the field. The goal of the EMRP-funded project VITCEA (Validated Inspection Techniques for Composites in Energy Applications) aims on the evaluation of the performance of various non-destructive testing methods on the inspection of fibre-reinforced plastics. In this talk the results of the comparison of different ultrasonic testing methods will be discussed. There are two challenges for the ultrasonic inspection of fibre-reinforced plastics. Firstly, different material properties of the fibre and the resin cause anisotropic acoustical behaviour of the material. Secondly, the physical layout of fibre layers leads to complex structures of fibre-reinforced plastic parts, and thus to a complex acoustical response. Both result in a reduction of the signal to noise ratio and make interpretation of measurement results rather extensive. During the VITCEA project, the acoustical behaviour of fibre-reinforced plate materials has been simulated. Specimens with artificial flaws for the evaluation of the detection thresholds have been designed and manufactured. Various mechanized ultrasonic testing methods including phased-array sensors, air-coupled transducers, immersion tank testing and contact technique have been evaluated on the specially designed specimen. Laboratory scale tests and a round robin test have been carried out. The probability of detection and the detection thresholds for each method have been estimated. T2 - ECNDT - European Conference on Non-Destructive Testing 2018 CY - Gothenburg, Sweden DA - 11.06.2018 KW - Comparison ndt methods FRP fibre reinforced plastics ultrasound PY - 2018 AN - OPUS4-47213 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas T1 - Ist die Ultraschall-Phased-Array-Technik die Zukunft der mechanisierten Schienenprüfung im Zeitalter von Bahn 4.0? N2 - Die Ultraschall Phased-Array Technik bietet durch die variable elektronische Steuerung des Schallfeldes gegenüber konventioneller Prüftechnik Vorteile bei vielen Prüfaufgaben, sowohl bei der Datenaufnahme als auch der bildhaften Bewertung. Die mechanisierte Schienenprüfung stellt sehr hohe Anforderungen an die Prüftechnik insbesondere durch die hohen Prüfgeschwindigkeiten von bis zu 20 m/s. Im Rahmen dieses Vortrags wird evaluiert, welche Lösungsansätze auf Basis der Ultraschall Phased-Array Technik vielversprechend erscheinen für einen Einsatz im Umfeld von Bahn 4.0. T2 - 10. Fachtagung ZfP im Eisenbahnwesen CY - Wittenberge, Germany DA - 13.03.2018 KW - Eisenbahn KW - Phased Array KW - Ultraschall KW - Mechanisierte Schienenprüfung PY - 2018 AN - OPUS4-47214 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas A1 - Casperson, Ralf A1 - Rühe, Sven A1 - Mook, Gerhard T1 - Signal processing for non-destructive testing of railway tracks N2 - Increased speed, heavier loads, altered material and modern drive systems result in an increasing number of rail flaws. The appearance of these flaws also changes continually due to the rapid change in damage mechanisms of modern rolling stock. Hence, interpretation has become difficult when evaluating non-destructive rail testing results. Due to the changed interplay between detection methods and flaws, the recorded signals may result in unclassified types of rail flaws. Methods for automatic rail inspection (according to defect detection and classification) undergo continual development. Signal processing is a key technology to master the challenge of classification and maintain resolution and detection quality, independent of operation speed. The basic ideas of signal processing, based on the Glassy-Rail-Diagram for classification purposes, are presented herein. Examples for the detection of damages caused by rolling contact fatigue also are given, and synergetic effects of combined evaluation of diverse inspection methods are shown. T2 - QNDE - Annual Review of Progress in Quantitative Nondestructive Evaluation CY - Provo, UT, USA DA - 16.07.2017 KW - Rail KW - Inspection KW - Train KW - Ultrasound KW - Signal KW - Processing PY - 2018 DO - https://doi.org/10.1063/1.5031528 VL - 1949 SP - 030005-1 EP - 030005-7 AN - OPUS4-47217 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Boehm, Rainer A1 - Heckel, Thomas ED - Bond, Leonard T1 - Simulation of Sparse Matrix Array Designs N2 - Matrix phased array probes are becoming more prominently used in industrial applications. The main drawbacks, using probes incorporating a very large number of transducer elements, are needed for an appropriate cabling and an ultrasonic device offering many parallel channels. Matrix arrays designed for extended functionality feature at least 64 or more elements. Typical arrangements are square matrices, e.g., 8 by 8 or 11 by 11 or rectangular matrixes, e.g., 8 by 16 or 10 by 12 to fit a 128-channel phased array system. In some phased array systems, the number of simultaneous active elements is limited to a certain number, e.g., 32 or 64. Those setups do not allow running the probe with all elements active, which may cause a significant change in the directivity pattern of the resulting sound beam. When only a subset of elements can be used during a single acquisition, different strategies may be applied to collect enough data for rebuilding the missing information from the echo signal. Omission of certain elements may be one approach, overlay of subsequent shots with different active areas may be another one. This paper presents the influence of a decreased number of active elements on the sound field and their distribution on the array. Solutions using subsets with different element activity patterns on matrix arrays and their advantages and disadvantages concerning the sound field are evaluated using semi-analytical simulation tools. Sound field criteria are discussed, which are significant for non-destructive testing results and for the system setup. T2 - QNDE 2017 CY - Utah, USA DA - 16.07.2017 KW - Imaging KW - Phased Array KW - Sparse Array KW - Matrix Array PY - 2018 DO - https://doi.org/10.1063/1.5031560 SP - 1949 EP - 1958 PB - AiP CY - Melville, NY 11747 - 4300, USA AN - OPUS4-45175 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krankenhagen, Rainer A1 - Maierhofer, Christiane A1 - Röllig, Mathias A1 - Heckel, Thomas A1 - Brackrock, Daniel A1 - Gaal, Mate T1 - Charakterisierung von Impactschäden während und nach der Belastung mit thermografischen Verfahren und mit Ultraschall N2 - Der Umfang der durch Impacts in Faserverbundmaterialien erzeugten Schäden ist abhängig von der Energie des Impacts, von der Zusammensetzung und dem Aufbau der Faserverbundwerkstoffe und von der Geometrie der Bauteile und hier im Wesentlichen von der Dicke des Bauteils. Der zerstörungsfreie Nachweis dieser Schädigungen kann sowohl mit Ultraschallverfahren als auch mit Verfahren der aktiven Thermografie erfolgen. Ein Vergleich der Nachweisempfindlichkeiten dieser Verfahren für die unterschiedlichen Schädigungen wird in diesem Beitrag in Abhängigkeit vom verwendeten Faserverbundwerkstoff (CFK und GFK), der Dicke des Materials und von der Impactenergie durchgeführt. Ergänzt werden die im Anschluss an die Schädigung eingesetzten ZfP-Verfahren mit zeitlich hochaufgelösten Thermografiemessungen, die bereits während des Impacts aufgenommen wurden. T2 - DGZfP Jahrestagung 2018 CY - Leipzig, Germany DA - 07.05.2018 KW - Thermografie KW - Ultraschall KW - Faserverbundwerkstoffe KW - Impactschäden PY - 2018 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-448773 SN - 978-3-940283-92-4 VL - 166 SP - 1 EP - 8 PB - Deutsche Gesellschaft für zerstörungsfreie Prüfung (DGZfP) CY - Berlin AN - OPUS4-44877 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krankenhagen, Rainer A1 - Maierhofer, Christiane A1 - Heckel, Thomas A1 - Brackrock, Daniel A1 - Gower, M. A1 - Lodeiro, M. A1 - Baker, G. T1 - Quantitative comparison of different non-destructive techniques for the detection of artificial defects in GFRP N2 - In order to test their suitability different non-destructive methods were performed to inspect a GFRP plate with artificial defects. These defects were manufactured by means of thin PTFE sheets inserted between two plies in three different depth. The inspection methods were microwave reflection, flash thermography and phased array ultrasonics, all applied to the same specimen. Selected results are shown for all methods demonstrating opportunities and limits of the particular inspection methods. The achieved detection limits and further application aspects are compared directly to provide a useful information for the planning of inspection tasks. T2 - ECNDT CY - Gothenburg, Sweden DA - 11.06.2018 KW - Fiber resisted polymers KW - Non-destructive testing KW - Thermographic testing KW - Ultrasonic testing PY - 2018 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-453728 SP - ECNDT-0247-2018 AN - OPUS4-45372 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hofmann, D. A1 - Rahammer, M. A1 - Liewald, M. A1 - Heckel, Thomas A1 - Huppmann, M. T1 - Vergleich von zerstörungsfreien und zerstörenden Prüfungen dünner Strukturklebungen in der Umformtechnik T1 - Comparison of non destructive and destructive tests of thin structural bonds in the forming technology N2 - Der vorliegende Fachartikel stellt die wichtigsten zerstörungsfreien Prüfmethoden zur Qualitätssicherung von dünnen Strukturklebungen vor. Auf diese Weise wird ersichtlich, welche Methoden neben der zerstörenden Prüfung von dünnen Strukturklebungen eingesetzt werden können, um einen Haftfestigkeitsverlust zu detektieren. Steigende Leichtbau- und Dämpfungsanforderungen an großflächige Blechbauteile sorgen trotz erhöhter Kosten für einen zunehmenden Einsatz von modernen hybriden Schichtverbundwerkstoffen in zahlreichen Konstruktionsanwendungen. In der Luft- und Raumfahrtindustrie gehören solche Werkstoffe seit geraumer Zeit zum aktuellen Stand der Technik, wohingegen diese Werkstoffkonzepte in der mobilen Großserie derzeit nur selten zum Einsatz kommen. Neben dem Materialversagen der einzelnen Schichten von Schichtverbundwerkstoffen spielt das interlaminare Versagen der Schichten untereinander eine entscheidende Rolle. In der Umformtechnik ist es möglich, dass die polymere Zwischenschicht und das Deckblech nach der Umformung noch in Kontakt stehen, obwohl die Scherfestigkeit bereits überschritten wurde. Dieser Kraftschluss der beiden Fügepartner resultiert aus den schwachen Van-der-Waals-Kräften, die eine eindeutige Detektion mit Hilfe von zerstörungsfreier Prüfung erschweren. Die vorliegende Publikation soll die Eignung diverser zerstörungsfreier Prüfverfahren auf die Detektion von sogenannten „kissing bonds“ (schwaches Anhaften der Schichten nach Versagen der Verbindung) überprüfen. KW - Zerstörungsfreie Prüfung KW - Zerstörende Prüfung KW - Klebeverbindungen KW - Umformtechnik PY - 2016 DO - https://doi.org/10.3139/120.110949 SN - 0025-5300 VL - 58 IS - 11-12 SP - 975 EP - 981 PB - Carl Hanser Verlag GmbH & Co. KG CY - München AN - OPUS4-43620 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Boehm, Rainer A1 - Heckel, Thomas A1 - Spruch, W. A1 - Beggerow, T. T1 - Ultrasonic Phased Array Design Study for High Speed Axle Inspection using an Electronically Rotating Beam N2 - For in-service inspections on wheelset axles with a hollow drilling, mechanized ultrasound inspection systems with single element probes are typically used. The ultrasonic testing in the zones close to the external surface of the railway axles can be realized from the inside of the bore hole, without demounting the wheelset and without dismantling the wheels and the brake discs. The testing system must be able to find flaws in the external surface of the hollow shafts, whose surface lies in the radial-radial plane, these are called transversal flaw. Presently testing systems are used, where scanning is realized in the circumferential direction by mechanical rotation of the probe system in the actual drilling. The phased array probe system, which is presented here, can carry out the rotation scan electronically. The scan can be carried out by simply moving the system forward and backwards through the drilling without mechanical rotation. Manipulation becomes simpler and the inspection time can be shortened considerably. The ultrasonic beam can be inclined exactly and be focused in the plane vertical to the specimen axis. The probe is designed with help of indispensable simulations using especially designed software developed by BAM. The feasibility and the alignment between the simulated and experimental results were shown in earlier projects reported by Boehm et al. (2006) and Völz et al. (2012). The main task here is to optimize a probe for bore holes with a diameter of 65 mm with an increase in sensitivity and a high spatial resolution. This development will be carried out by use of extensive simulations and result in certain changes of the relevant probe parameters. KW - Phased Array KW - Ultrasound KW - Axle inspection PY - 2017 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-436230 DO - https://doi.org/10.1016/j.prostr.2017.07.001 VL - 2017 IS - 4 SP - 71 EP - 78 PB - Elsevier B.V. AN - OPUS4-43623 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Krankenhagen, Rainer A1 - Röllig, Mathias A1 - Heckel, Thomas A1 - Brackrock, Daniel A1 - Gaal, Mate T1 - Quantification of impact damages in CFRP and GFRP structures with thermography and ultrasonics N2 - The extent of damage caused by impacts in fibre reinforced composites depends on the energy of the impacts, on the velocity and the shape of the impacting body, on the material and structure of the composite and on the geometry of the structure. Here, mainly the thickness of the component is essential. The non-destructive evaluation of these damages can be carried out using both ultrasound and active thermography methods. A comparison of the detection sensitivity of these methods for the different damages is carried out in this paper depending on the fibre composite material used (CFRP and GFRP), the thickness of the material and the impact energy. The NDT methods used after the damage are supplemented by thermographic measurements with high temporal resolution, which were already recorded during the impact. T2 - 14th Quantitative InfraRed Thermography Conference CY - Berlin, Germany DA - 25.06.2018 KW - Active thermography KW - Passive thermography KW - Ultrasonics KW - CFRP KW - GFRP KW - Impact PY - 2018 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-454952 UR - http://www.qirt.org/archives/qirt2018/papers/126.pdf DO - https://doi.org/10.21611/qirt.2018.126 SP - 933 EP - 940 PB - DGZfP e. V. AN - OPUS4-45495 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Pérez Alonso, M. A1 - Albarrán Sanz, J. A1 - Dinkel, M. A1 - Heckel, Thomas A1 - Kotschate, Daniel A1 - Cabeza, Sandra A1 - Senaneuch, J. A1 - Heikkila, I. A1 - Toscanelli, O. T1 - A novel approach for rating fatigue-initiating inclusions in highly demanding steel (INCAFAT) N2 - INCAFAT project aimed to improve existing fatigue damage models by establishing the most suitable combination of measurement techniques to characterise harmful inclusion populations in highly demanding steels. The different inclusion assessments carried out confirm that, chemical composition, secondary metallurgy and manufacturing route affect content, nature, size and shape of inclusions. According to the FEM model, inclusions produce an alteration of the stress field in their surrounding region, which can promote a fatigue failure. Experimental work on fatigue testing has demonstrated that depending on the stressed direction fatigue failures in highly demanding steels could be produced by different types of inclusions. Fractography analyses confirmed that meso-inclusions harmful in fatigue cannot be rated by standard methods, nor 10 MHz ultrasonic testing (macro) or micro-cleanness assessments. The necessity of rating these meso-inclusions has led to critical evaluation of Extreme Value Analysis according to ASTM E2283-08 and the development of high frequency immersion ultrasonic testing. EVA methodology based on inclusion width can be applied reliably when principal stress is parallel to the rolling direction. On the contrary, if inclusions are testing in the elongated directions its fails. On the other hand, the guidelines and recommendations for high frequency ultrasonic testing have been compiled in a new European standard draft. This method based on focal beam probes and high-resolution devices is able to provide information on meso-inclusion distribution. KW - Material characterisation KW - Non-destructive testing KW - Ultrasonic testing KW - Cleanliness PY - 2018 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-479219 UR - https://publications.europa.eu/en/publication-detail/-/publication/6bd25206-316a-11e8-b5fe-01aa75ed71a1/language-en/format-PDF/source-68610160 SN - 978-92-79-76985-6 DO - https://doi.org/10.2777/473350 SN - 1831-9424 SN - 1018-5593 SP - 1 EP - 154 AN - OPUS4-47921 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rohrschneider, A. A1 - Heckel, Thomas A1 - Oelschlägel, T. A1 - Schöll, M. T1 - Innovative Optimierung der Ultraschallprüfung an Radsatzwellen N2 - Betriebsbedingte Belastungen und eventuelle Oberflächenschädigungen einer Radsatzwelle können zu deren Versagen führen. Daher besteht die Notwendigkeit zur vorbeugenden Prüfung mit Hilfe zerstörungsfreier Prüfverfahren. Zurzeit setzt die Deutsche Bahn AG mechanisierte Ultraschall-Prüfsysteme (HPS-Anlagen) bei Radsatzwellen mit Längsbohrung ein. Die Prüfung erfolgt an den im Fahrzeug eingebauten Radsatzwellen. Diese Prüfanlagen nutzen feste Einschallwinkel. Die Nachweisempfindlichkeit liegt bei 2 mm tiefen Vergleichsfehlern für die Querfehlerprüfung. Zur Detektion der Querfehler werden positionsabhängige Blenden im A-Bild eingesetzt. Physikalisch bedingt können aber auch Unregelmäßigkeiten in der Beschichtung, aufgepresste Komponenten und andere Einflüsse zu einer Blendenüberschreitung und somit zu einer Befundung der Radsatzwelle führen. Die konventionelle Prüftechnik erlaubt dabei keine Unterscheidung zwischen diesen sogenannten Scheinanzeigen und den Querfehlern. Ein Radsatztausch mit anschließender Demontage zur Ermittlung der Anzeigenursache ist in diesen Fällen daher derzeit unvermeidlich. Die von der DB Systemtechnik und Partnern untersuchte Phased-Array-Technik mit SAFT-Auswertealgorithmus (Synthetic Aperture Focussing Technique) soll helfen, die UT-Anzeigen besser bewerten zu können und den unnötigen Radsatzwechsel zu vermeiden. Das Ziel des UT-SAFT-Verfahrens ist es, die Tiefenkomponente von Rissen über das Rissspitzensignal zu detektieren und auswertbar zu machen. Durch eine nachgeschaltete UT-SAFT-Analyse soll an befundeten Radsatzwellen nachuntersucht werden, ob die Anzeigen der Reflektorpositionen innerhalb des Wellenvolumens, auf der Grenzfläche oder außerhalb des Wellenvolumens liegen. Es wird erwartet, dass durch die zeitnahe Bestimmung der Anzeigenursache die erforderlichen Radsatzwechsel deutlich reduziert werden. Dadurch ist eine Erhöhung der Fahrzeugverfügbarkeit und eine Kostenreduzierung (Reduzierung des Aufwandes für Radsatzausbau, Radsatztransport, Nachprüfung und Aufarbeitung der Radsätze) erreichbar. T2 - DGZfP-Jahrestagung 2013 CY - Dresden, Germany DA - 06.05.2013 PY - 2013 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-286171 SN - 978-3-940283-49-8 IS - Mi.1.A.3 SP - 1 EP - 10 PB - Deutsche Gesellschaft für zerstörungsfreie Prüfung e.V. (DGZfP) AN - OPUS4-28617 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maack, Stefan A1 - Benner, Philipp A1 - Kröll, Mirco A1 - Prager, Jens A1 - Daum, Werner A1 - Casperson, Ralf A1 - Heckel, Thomas A1 - Spaltmann, Dirk A1 - et al., ED - Wahlster, W. ED - Winterhalter, C. T1 - Deutsche Normungsroadmap künstliche Intelligenz T1 - German standardization roadmap on artificial intelligence N2 - Im Auftrag des Bundesministeriums für Wirtschaft und Klimaschutz haben DIN und DKE im Januar 2022 die Arbeiten an der zweiten Ausgabe der Deutschen Normungsroadmap Künstliche Intelligenz gestartet. In einem breiten Beteiligungsprozess und unter Mitwirkung von mehr als 570 Fachleuten aus Wirtschaft, Wissenschaft, öffentlicher Hand und Zivilgesellschaft wurde damit der strategische Fahrplan für die KI-Normung weiterentwickelt. Koordiniert und begleitet wurden diese Arbeiten von einer hochrangigen Koordinierungsgruppe für KI-Normung und -Konformität. Mit der Normungsroadmap wird eine Maßnahme der KI-Strategie der Bundesregierung umgesetzt und damit ein wesentlicher Beitrag zur „KI – Made in Germany“ geleistet. Die Normung ist Teil der KI-Strategie und ein strategisches Instrument zur Stärkung der Innovations- und Wettbewerbsfähigkeit der deutschen und europäischen Wirtschaft. Nicht zuletzt deshalb spielt sie im geplanten europäischen Rechtsrahmen für KI, dem Artificial Intelligence Act, eine besondere Rolle. N2 - On behalf of the German Federal Ministry of Economic Affairs and Climate Action, DIN and DKE started work on the second edition of the German Standardization Roadmap Artificial Intelligence in January 2022. With the broad participation and involvement of more than 570 experts from industry, science, the public sector and civil society, the strategic Roadmap for AI standardization was thus further developed. This work was coordinated and accompanied by a high-level coordination group for AI standardization and conformity. The standardization roadmap implements a measure of the German government’s AI Strategy and thus makes a significant contribution to “AI – Made in Germany”. Standardization is part of the AI Strategy and is a strategic instrument for strengthening the innovation and competitiveness of the German and European economies. Not least for this reason, standardization plays a special role in the planned European legal framework for AI, the Artificial Intelligence Act. KW - Digitalisierung KW - Künstliche Intelligenz KW - Datenwissenschaft KW - Normung Roadmap KW - Data science KW - Artificial intelligence KW - Standardization roadmap KW - Digitization PY - 2022 UR - https://www.din.de/resource/blob/1072988/20bf33d405710a703aa26f81362493bb/ausgabe-2-nrm-ki-data.pdf UR - https://www.dke.de/de/arbeitsfelder/core-safety/normungsroadmap-ki SP - 1 EP - 448 PB - Deutsches Institut für Normung (DIN) CY - Berlin ET - 2. AN - OPUS4-56576 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Müller, Christina A1 - Heckel, Thomas A1 - Brömel, Philip A1 - Pavlovic, Mato A1 - Ronneteg, U. T1 - Attenuation dependent detectability at ultrasonic inspection of copper N2 - This report describes the progress in understanding and describing the detectability of the ultrasonic inspection technique developed by SKB for the inspection of copper tubes used for the final disposal of the Swedish spent nuclear fuel. In former research activities dedicated to the different parts of the canister, the probability of detection (POD) evaluation technique, as developed for thin aircraft components, was further developed for the application on complex hick-walled components. The result of this development was the introduction of a “multi-parameter” POD framework. In contrast to taking only the defect size into consideration (as for aircraft components) additional influencing factors, relevant for thick components, such as depth position, orientation and part geometry, were included. Furthermore, the variation of ultrasonic attenuation due to various material properties was included. PY - 2014 SP - ID 1411328, 1 EP - 54 AN - OPUS4-32522 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas T1 - What are the Influencing Factors on Inspection Performance of UT Testing on the Wheel Set Hollow Axle in Context of Education and Brush Up Examination? T2 - 5th European-American Workshop on Reliability of NDE CY - Seminaris Campus Hotel in Berlin, Germany DA - 2014-10-07 PY - 2014 AN - OPUS4-32213 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas T1 - Investigation of Multiple Parameter Influences on the POD of Mechanized UT-Testing T2 - 5th European-American Workshop on Reliability of NDE CY - Seminaris Campus Hotel Berlin, Germany DA - 2014-10-07 PY - 2014 AN - OPUS4-32214 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas T1 - Einflussfaktoren auf die Prüfleistung bei der Wellenprüfung in der Ausbildung T2 - 8. Fachtagung Zerstörungsfreie Prüfung im Eisenbahnwesen CY - Wittenberge, Germany DA - 2014-03-18 PY - 2014 AN - OPUS4-32215 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -