TY - CONF A1 - Harrer, Andrea T1 - Ökodesign und Energieverbrauchskenzeichnung - Chancen und Herausforderungen T2 - Wirschaftsausschusssitzung FV Reinigungssysteme, VDMA CY - Messe Berlin DA - 2015-09-25 PY - 2015 AN - OPUS4-34314 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Harrer, Andrea T1 - Energieverbrauchskennzeichnung für Lichtquellen die neuen Regeln und ihre Auswirkungen auf die Leuchtenindustrie N2 - Seit dem 1. September 2021 gelten zwei neue europäische Verordnungen für Lichtquellen, welche deren umweltgerechte Gestaltung und ihre Energieverbrauchkennzeichnung regeln. In diesem Vortrag werden die neuen Anforderungen und ihre Auswirkungen auf die Leuchtenindustrie erläutert. T2 - Mitgliederversammlung des Arbeitgeberverbands Leuchten- und Zubehör-Industrie (VLZ) e.V. CY - Online meeting DA - 15.09.2021 KW - Ökodesign KW - Energieverbrauchskennzeichnung KW - Beleuchtung PY - 2021 AN - OPUS4-54723 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schlegel, Moritz-Caspar A1 - Rockland, Ulrike A1 - Harrer, Andrea T1 - Informationsmaterial zu Wartung und Betrieb von Getränkekühlern N2 - „Getränkekühler optimal einsetzen“: So sparen Sie die Energiekosten und schonen das Klima. Wussten Sie, dass Sie durch den Einsatz eines effizienten Getränkekühlers (Energieeffizienzklasse B) ca. 114 € pro Jahr sparen im Vergleich zu einem weniger effizienten Gerät (Energieeffizienzklasse D)? Aber nicht immer gibt es die Möglichkeit ein Neugerät anzuschaffen. Oft werden die Kühlgeräte von Getränkeherstellern zur Präsentation ihrer Waren zur Verfügung gestellt. Trotzdem tragen am Ende die Betreiber:innen die Betriebskosten der Geräte. Aber auch beim Einsatz Ihres weniger effizienten Getränkekühler gibt es verschiedene Möglichkeiten, die Energiekosten zu senken. Beispielsweise kann schon der Einsatz einer Zeitschaltuhr zu einer Stromreduzierung von bis zu 50 Prozent oder auch die richtige Platzierung der Geräte an kühlen Orten ohne Zugluft zu einem geringeren Strombedarf von bis zu 30% führen. In unserer Checkliste für die Aufstellung und das Betreiben von Getränkekühlgeräten zeigen wir Ihnen einfache Schritte, um den Energieverbrauch schnell zu senken. KW - Getränkekühler PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-561581 SP - 1 EP - 2 CY - Berlin AN - OPUS4-56158 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schmidt, Stephan A1 - Hoffmann, Holger A1 - Garbe, Leif-Alexander A1 - Harrer, Andrea A1 - Steiner, Markus A1 - Himly, Martin A1 - Schneider, Rudolf T1 - Re-assessment of monoclonal antibodies against diclofenac for their application in the analysis of environmental waters N2 - The non-steroidal anti-inflammatory drug (NSAID) diclofenac (DCF) is an important environmental contaminant occurring in surface waters all over the world, because, after excretion, it is not adequately removed from wastewater in sewage treatment plants. To be able to monitor this pollutant, highly efficient analytical methods are needed, including immunoassays. In a medical research project, monoclonal antibodies against diclofenac and its metabolites had been produced. Based on this monoclonal anti-DCF antibody, a new indirect competitive enzyme-linked immunosorbent assay (ELISA) was developed and applied for environmental samples. The introduction of a spacer between diclofenac and the carrier protein in the coating conjugate led to higher sensitivity. With a test midpoint of 3 mg L−1 and a measurement range of 1–30 mg L−1, the system is not sensitive enough for direct analysis of surface water. However, this assay is quite robust against matrix influences and can be used for wastewater. Without adjustment of the calibration, organic solvents up to 5%, natural organic matter (NOM) up to 10 mg L−1, humic acids up to 2.5 mg L−1, and salt concentrations up to 6 g L−1 NaCl and 75 mg L−1 CaCl2 are tolerated. The antibody is also stable in a pH range from 3 to 12. Cross-reactivity (CR) of 1% or less was determined for the metabolites 40-hydroxydiclofenac (40-OH-DCF), 5-hydroxydiclofenac (5-OH-DCF), DCF lactam, and other NSAIDs. Relevant cross-reactivity occurred only with an amide derivative of DCF, 6-aminohexanoic acid (DCF-Ahx), aceclofenac (ACF) and DCF methyl ester (DCF-Me) with 150%, 61% and 44%, respectively. These substances, however, have not been found in samples. Only DCF-acyl glucuronide with a cross-reactivity of 57% is of some relevance. For the first time, photodegradation products were tested for cross-reactivity. With the ELISA based on this antibody, water samples were analysed. In sewage treatment plant effluents, concentrations in the range of 1.9–5.2 mg L−1 were determined directly, with recoveries compared to HPLC-MS/MS averaging 136%. Concentrations in lakes ranged from 3 to 4.4 ng L−1 and were, after pre-concentration, determined with an average recovery of 100% KW - Antikörper KW - Immunoassay KW - Wasser PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-602280 DO - https://doi.org/10.1039/d3ay01333b VL - 16 IS - 21 SP - 3349 EP - 3363 PB - Royal Society of Chemistry (RSC) CY - London AN - OPUS4-60228 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Harrer, Andrea T1 - Die Richtlinien zum Ökodesign und zur Energieverbrauchskennzeichnung im Bereich der Kälte- und Großküchentechnik N2 - Der Vortrag beleuchtet die Verordnungen, die im Rahmen der Ökodesign- und der Energieverbauchskennzeichnungsrichtlinie im Bereich der Großküchentechnik in Kraft sind, sowie die Anforderungen, die sich daraus ergeben. Zu diesem Zweck werden zunächst die beiden genannten Richtlinien vorgestellt und die Rolle der BAM in diesem Zusammenhang aufgezeigt. Anschließend werden die konkreten Maßnahmen zu Kühl- und Gefriergeräten, Geschirrspülern, Öfen, Herden, Dunstabzugshauben und zur Klimatechnik erläutert. Der Vortrag schließt mit einem Ausblick auf kommende Regulierungen im betrachteten Bereich. T2 - HKI Forum „Großküchentechnik im Fokus von Verordnungen, Richtlinien und Normen“ CY - Frankfurt am Main, Germany DA - 07.06.2016 KW - Großküchentechnik KW - Ökodesign KW - Energieverbrauchskennzeichnung PY - 2016 AN - OPUS4-38610 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schlegel, Moritz-Caspar A1 - Koch, Claudia A1 - Mirtsch, Mona A1 - Harrer, Andrea T1 - Smart Products Enable Smart Regulations—Optimal Durability Requirements Facilitated by the IoT N2 - The challenges and opportunities linked with IoT have been intensively discussed in recent years. The connectivity of things over their entire life cycle and the smart properties associated with it provide new functionalities and unprecedented availability of (usage) data. This offers huge opportunities for manufacturers, service providers, users, and also policymakers. The latter May impact policy areas such as the regulations on resource and materials efficiency under the Ecodesign Directive 2009/125/EC. With the general approach as it is practiced today, legal requirements are usually set for entire product groups without considering the products individually, including user behavior and environmental conditions. The increasing number of smart products and the growing availability of product data are sparking a discussion on whether these requirements could be more product and application-specific. This paper presents a method for calculating the economically and ecologically optimal durability of a product. It allows determining the point in time when a product should be replaced by combining consumer data with product design data. This novel Approach could contribute to making product regulation more flexible and possibly more efficient. In this context, fundamental challenges associated with smart products in policymaking are also discussed. KW - Ecodesign KW - Internet of Things KW - Connectivity KW - Resource efficiency KW - Policy making PY - 2021 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-524924 DO - https://doi.org/10.3390/su13084395 VL - 13 IS - 8 SP - 4395 PB - MDPI CY - Basel AN - OPUS4-52492 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Daschewski, Maxim A1 - Kreutzbruck, Marc A1 - Prager, Jens A1 - Dohse, Elmar A1 - Gaal, Mate A1 - Harrer, Andrea T1 - Resonanzfreie Messung und Anregung von Ultraschall N2 - In diesem Beitrag präsentieren wir innovative Methoden für die breitbandige und resonanzfreie Messung und Anregung von Ultraschall. Das Messverfahren verwendet eine Kunststofffolie und ein Laser-Vibrometer als breitbandigen und resonanzfreien Empfänger. Im Allgemeinen ermöglicht dieses Verfahren eine präzise Messung der Schallschnelle und des Schalldruckes in beliebigen, für das Laserlicht transparenten Flüssigkeiten und Gasen mit bekannter Dichte und Schallgeschwindigkeit. Das resonanzfreie Senden von Ultraschall basiert auf einem elektro-thermo-akustischen Wandlerprinzip und ermöglicht, im Gegensatz zu herkömmlichen Ultraschallwandlern, die Erzeugung von beliebig geformten akustischen Signalen ohne Resonanzen und ohne Nachschwingen. N2 - In this contribution we present innovative methods for broadband and resonance-free sensing and emitting of ultrasound. The sensing method uses a polyethylene foil and a laser vibrometer as a broadband and resonance-free sound receiver. In general, this method enables absolute measurement of sound particle velocity and sound pressure in arbitrary, laser beam transparent liquids and gases with known density and sound velocity. The resonance-free emitting method is based on the electro-thermo-acoustic principle and enables, contrary to conventional ultrasound transducers, generation of arbitrary shaped acoustic signals without resonances and post-oscillations. KW - Ultraschall KW - Übertragungsfunktion KW - Charakterisierung von Ultraschallmesssystemen KW - Thermo-akustische Ultraschallemitter KW - Ultrasound KW - Transfer function KW - Characterization of ultrasonic measurement systems KW - Thermo-acoustic ultrasound emitter PY - 2015 DO - https://doi.org/10.1515/teme-2014-0020 SN - 0340-837X SN - 0178-2312 SN - 0171-8096 VL - 82 IS - 3 SP - 156 EP - 166 PB - Oldenbourg CY - München AN - OPUS4-32733 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Harrer, Andrea T1 - Die Ökodesign-Richtlinie und betroffene Lose von Großküchengeräten N2 - Vortrag im Rahmen des HKI Forums „CE-Kennzeichnung – Wissen was dahinter steckt !“ mit Fokus auf die Ökodesign-Richtlinie. T2 - HKI Forum „CE-Kennzeichnung – Wissen was dahinter steckt !“ CY - Frankfurt, Germany DA - 12.09.2017 KW - Ökodesign-Richtlinie KW - CE-Kennzeichnung KW - Großküchengeräte PY - 2017 AN - OPUS4-41975 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Harrer, Andrea T1 - Application of active thermography to the detection of safety relevant defects in civil engineering structures T2 - 7th International Symposium on Nondestructive Testing in Civil Engineering CY - Nantes, France DA - 2009-07-02 PY - 2009 N1 - Geburtsname von Harrer, Andrea: Kramer, A. - Birth name of Harrer, Andrea: Kramer, A. AN - OPUS4-19808 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Harrer, Andrea T1 - Carbon nanomaterials as broadband airborne ultrasound transducer T2 - International congress on Ultrasonics 2011 CY - Gdansk, Poland DA - 2011-09-05 PY - 2011 AN - OPUS4-24382 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Harrer, Andrea T1 - Erzeugung von Luftultraschall mit mikro- und nanostrukturierten Kohlenstoffmaterialien unter Ausnutzung des Themoakustischen Prinzips T2 - Jahrestagung für Akustik (DAGA 2011) CY - Düsseldorf, Germany DA - 2011-03-21 PY - 2011 AN - OPUS4-25216 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Harrer, Andrea A1 - Prager, Jens A1 - Kreutzbruck, Marc A1 - Guderian, Matthias A1 - Meyer-Plath, Asmus T1 - Erzeugung von Luftultraschall mit mikro- und nanostrukturierten Kohlenstoffmaterialien unter Ausnutzung des thermoakustischen Prinzips N2 - In diesem Beitrag wird ein neuartiger Ansatz zur Erzeugung von Luftultraschall vorgestellt, der auf dem thermoakustischen Prinzip beruht. Mikro- und nanostrukturierte Kohlenstoffmaterialien werden dabei mit einem harmonischen Wechselstrom gespeist und erfahren durch ohmsche Verluste eine Temperaturänderung, die sich auf das umgebende Fluid überträgt. Daraus resultieren Druckmodulationen, und es wird eine ausbreitungsfähige Schallwelle erzeugt. Dabei tritt Frequenzverdopplung gegenüber der Anregungsfrequenz auf. Es konnte gezeigt werden, dass der entscheidende Parameter für die Effizienz der Methode, d.h. für ein möglichst großes Verhältnis von Schalldruck zu eingebrachter Leistung, die Wärmekapazität pro Flächeneinheit ist. Da dieser Quotient für Kohlenstoffmaterialien sehr klein sein kann, erlaubt das thermoakustische Prinzip hier die effiziente Erzeugung von Luftultraschall. Schalldruckmessungen an verschiedenen Materialproben wurden bis 100 kHz mit einem Mikrofon durchgeführt, oberhalb von 100 kHz wurde eine laservibrometrische Schnellemessung eingesetzt. In experimentellen Untersuchungen wurde die Schallerzeugung in Abhängigkeit der Materialeigenschaften analysiert und systematisiert. Die experimentellen Ergebnisse wurden mit numerischen und analytischen Berechnungsergebnissen verglichen. T2 - DAGA 2011 - 37. Jahrestagung für Akustik - Fortschritte der Akustik CY - Düsseldorf, Germany DA - 21.03.2011 KW - Thermoakustisches Prinzip KW - Luftultraschall KW - Kohelnstoffmaterialien PY - 2011 SN - 978-3-939296-02-7 SP - 339 EP - 340 AN - OPUS4-25328 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Daschewski, Maxim A1 - Harrer, Andrea A1 - Prager, Jens A1 - Kreutzbruck, Marc A1 - Guderian, Matthias A1 - Meyer-Plath, Asmus ED - Linde, B. B. J. ED - Paczkowski, J. ED - Ponikwicki, N. T1 - Carbon nanomaterials as broadband airborne ultrasound transducer N2 - A method has been developed for the generation of airborne ultrasound using the thermoacoustic principle applied to carbon materials at the micro- and nanoscale. Such materials are shown to be capable to emitting the ultrasound. We tested the acoustic performance of electrospun polyacrylonitrile-derived carbon nanofibers tissues and determined the sound pressure for frequencies up to 350 kHz. The experimental results are compared to analytic calculations. T2 - International congress on ultrasonics CY - Gdansk, Poland DA - 2011-09-05 KW - Thermoacoustic KW - Airborne ultrasound transducer KW - Sound pressure PY - 2012 SN - 978-0-7354-1019-0 DO - https://doi.org/10.1063/1.3703262 SN - 0094-243X N1 - Serientitel: AIP conference proceedings – Series title: AIP conference proceedings IS - 1433 SP - 624 EP - 627 PB - American Institute of Physics CY - Melville, NY AN - OPUS4-26788 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Daschewski, Maxim A1 - Harrer, Andrea A1 - Prager, Jens A1 - Kreutzbruck, Marc A1 - Beck, Uwe A1 - Lange, Thorid A1 - Weise, Matthias T1 - Metallic nanofilm as resonance-free airborne ultrasound emitter N2 - A novel approach for the generation of broadband airborne ultrasound by using the thermo-acoustic effect is presented in this contribution. We investigate the applicability of resonance-free thermo-acoustic emitters for generation of very short high pressure airborne ultrasound pulses. A thermoacoustic emitter consisting of a 30 nm thin metallic film on a usual soda-lime glass substrate generates sound pressure values of more than 140 dB at 60 mm distance. The results are compared with conventional piezoelectric airborne ultrasound transducers. Our investigations show the applicability of the thermo-acoustic devices for broadband and high pressure ultrasound emitters using pulse excitation. T2 - 2012 IEEE International Ultrasonics Symposium (IUS) CY - Dresden, Germany DA - 2012-10-07 KW - Thermo-acoustic KW - Broadband airborne ultrasound KW - Resonance-free ultrasound transducer KW - High pressure airborne ultrasound KW - Sound particle velocity measurement PY - 2012 SN - 978-1-4673-4562-0 DO - https://doi.org/10.1109/ULTSYM.2012.0241 SN - 1948-5719 SP - 965 EP - 967 AN - OPUS4-29152 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Daschewski, Maxim A1 - Harrer, Andrea A1 - Prager, Jens A1 - Kreutzbruck, Marc A1 - Beck, Uwe A1 - Lange, Thorid A1 - Weise, Matthias T1 - A resonance-free nano-film airborne ultrasound emitter N2 - In this contribution we present a novel thermo-acoustic approach for the generation of broad band airborne ultrasound and investigate the applicability of resonance-free thermo-acoustic emitters for very short high pressure airborne ultrasound pulses. We report on measurements of thermo-acoustic emitter consisting of a 30 nm thin metallic film on a usual soda-lime glass substrate, generating sound pressure values of more than 140 dB at 60 mm distance from the transducer and compare the results with conventional piezoelectric airborne ultrasound transducers. Our experimental investigations show that such thermo-acoustic devices can be used as broad band emitters using pulse excitation. T2 - 39th Annual review of progress in quantitative nondestructive evaluation CY - Denver, Colorado, USA DA - 15.07.2012 KW - Thermo-acoustic KW - Broad band airborne ultrasound KW - High pressure airborne ultrasound KW - Resonance free ultrasound transducer KW - Broad band ultrasonic emitter KW - Measurement sound particle velocity PY - 2013 SN - 978-0-7354-1129-6 DO - https://doi.org/10.1063/1.4789225 SN - 0094-243X SN - 1551-7616 N1 - Serientitel: AIP conference proceedings – Series title: AIP conference proceedings VL - 1511 SP - 1541 EP - 1546 AN - OPUS4-27790 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Daschewski, Maxim A1 - Boehm, Rainer A1 - Prager, Jens A1 - Kreutzbruck, Marc A1 - Harrer, Andrea T1 - Physics of thermo-acoustic sound generation N2 - We present a generalized analytical model of thermo-acoustic sound generation based on the analysis of thermally induced energy density fluctuations and their propagation into the adjacent matter. The model provides exact analytical prediction of the sound pressure generated in fluids and solids; consequently, it can be applied to arbitrary thermal power sources such as thermophones, plasma firings, laser beams, and chemical reactions. Unlike existing approaches, our description also includes acoustic near-field effects and sound-field attenuation. Analytical results are compared with measurements of sound pressures generated by thermo-acoustic transducers in air for frequencies up to 1 MHz. The tested transducers consist of titanium and indium tin oxide coatings on quartz glass and polycarbonate substrates. The model reveals that thermo-acoustic efficiency increases linearly with the supplied thermal power and quadratically with thermal excitation frequency. Comparison of the efficiency of our thermo-acoustic transducers with those of piezoelectric-based airborne ultrasound transducers using impulse excitation showed comparable sound pressure values. The present results show that thermo-acoustic transducers can be applied as broadband, non-resonant, high-performance ultrasound sources. KW - Thermophone KW - Ionophone KW - Thermo-acoustic effect KW - Non resonant ultrasound source PY - 2013 DO - https://doi.org/10.1063/1.4821121 SN - 0021-8979 SN - 1089-7550 VL - 114 SP - 114903-1 - 114903-12 PB - American Institute of Physics CY - Melville, NY AN - OPUS4-29278 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Harrer, Andrea A1 - Nies, Daniel A1 - Pulz, Robert A1 - Röllig, Mathias A1 - Rehmer, Birgit T1 - Untersuchung von Transport- und Schädigungsprozessen in Keramiken und mineralischen Baustoffen mit lokal und global angeregter aktiver Thermografie N2 - In diesem Beitrag wird die Entwicklung eines aktiven Thermografieverfahrens zur zeit- und ortsaufgelösten in-situ und Echtzeit-Visualisierung von Transport- und Schädigungsprozessen für Anwendungen in Industrie und Umwelt vorgestellt. Das Verfahren ermöglicht unter Verwendung verschiedener thermischer Anregungsquellen u.a. die Bestimmung der thermischen Materialeigenschaften von Keramiken und trockenen und feuchten mineralischen Baustoffen. Schädigungsprozesse in Keramiken können in-situ visualisiert werden. Weiterhin werden Messergebnisse vorgestellt, die während des kapillaren Feuchtetransports in Naturstein erfasst wurden und diesen abbilden können. T2 - Sensoren und Messsysteme 2010 - 15. ITG/GMA-Fachtagung CY - Nürnberg, Deutschland DA - 2010-05-18 PY - 2010 SN - 978-3-8007-3260-9 IS - Paper 116 SP - 658 EP - 663 PB - VDE Verlag GmbH CY - Berlin, Offenbach AN - OPUS4-21949 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Harrer, Andrea T1 - Laser Induced Active Thermography for the Visualization of Transport Processes in Building Materials T2 - 5th International Workshop Non-Destructiv Testing in Progress, Meeting of Non-Destructive Testing experts CY - Prague, Czech Republic DA - 2009-10-12 PY - 2009 AN - OPUS4-20056 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Harrer, Andrea T1 - Visualisation of Transport Processes in Building Materials by Laser Induced Active Thermography T2 - 10th European Conference on non-destructive testing CY - Moscow, Russia DA - 2010-06-07 PY - 2010 AN - OPUS4-21645 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Harrer, Andrea T1 - Untersuchung von Transport- und Schädigungsprozessen mittels likal angeregter aktiver Thermografie T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Germany DA - 2010-05-10 PY - 2010 AN - OPUS4-21636 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Harrer, Andrea A1 - Nies, Daniel A1 - Pulz, Robert A1 - Kervalishvili, Guram N. A1 - Rehmer, Birgit A1 - Stephan, Ina A1 - Maierhofer, Christiane T1 - Untersuchung von Transport- und Schädigungsprozessen mittels lokal angeregter aktiver Thermografie N2 - Als schnelles und berührungsfreies Messverfahren kann die aktive Thermografie auch in-situ eingesetzt werden, d.h. während sich Materialeigenschaften aufgrund direkter oder indirekter Einflüsse ändern. In diesem Beitrag stellen wir die Methode der aktiven Thermografie mittels lokaler Laseranregung und deren Anwendung auf unterschiedliche Materialien wie Holz, Sandstein und Keramiken vor. Mit der im Folgenden beschriebenen Methode wurden der Einfluss von Holzschutzmitteln auf die thermischen Eigenschaften von Holz, Feuchtetransportprozesse in Naturstein sowie die thermischen Eigenschaften von Siliziumcarbid unterschiedlicher Dicke und von Hochtemperaturkeramiken nach zunehmender thermischer Belastung in-situ untersucht. Experimentelle Ergebnisse werden u. a. im Vergleich mit numerischen Simulationen vorgestellt. T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Deutschland DA - 2010-05-10 PY - 2010 SN - 978-3-940283-26-9 IS - DGZfP-BB 122 (P36) SP - 1 EP - 9 CY - Berlin AN - OPUS4-21888 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Harrer, Andrea T1 - Belastbarkeit von Prüfverfahren N2 - Vortrag im Rahmen eines VDE-Infotages zu Haushaltsgeräten: Präsentation der Auswertung von Ringversuchsdaten zum Test von Prüfverfahren für das Energielabel von Haushaltsgeräten T2 - VDE-Infotag zu Haushaltsgeräten CY - Offenbach, Germany DA - 05.11.2019 KW - Ringversuch KW - Energielabel KW - Haushaltsgeräte PY - 2019 AN - OPUS4-49544 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Harrer, Andrea A1 - Daschewski, Maxim A1 - Prager, Jens A1 - Kreutzbruck, Marc A1 - Guderian, Matthias A1 - Meyer-Plath, Asmus T1 - Thermoacoustic generation of airborne ultrasound using carbon materials at the micro- and nanoscale N2 - The generation of airborne ultrasound is presented using the thermoacoustic principle applied to carbon materials at the micro- and nanoscale. Such materials are shown to be capable of emitting ultrasound when being fed by an alternating current. We tested the acoustic performance of carbon fibers, bucky papers and electrospun polyacrylonitrile-derived carbon nanofibers and determined the sound pressure for frequencies up to 350 kHz. A comparison between the experimental results and the theoretical prediction showed remarkable agreement for frequencies up to 150 kHz. Beyond 150 kHz, we found slight deviations from the expected sound pressure dependence on the square root of the frequency. KW - Thermoacoustic KW - Airborne ultrasound transducer KW - Sound pressure PY - 2012 DO - https://doi.org/10.3233/JAE-2012-1440 SN - 1383-5416 SN - 0925-2096 VL - 39 IS - 1-4 SP - 35 EP - 41 PB - IOS Press CY - Amsterdam, The Netherlands AN - OPUS4-26737 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -