TY - JOUR A1 - Krysell, M. A1 - Becker, Roland A1 - Wegener, J. W. A1 - Buge, Hans-Gerhard T1 - Certified reference materials for organic contaminants in sewage sludge - a feasibility study JF - Accreditation and quality assurance N2 - As an answer to the re-evaluation of the European sludge directive, two novel reference materials for organic components in municipal sludge have been produced and test certified for AOX (absorbable organic halogens), PAH (polycyclic aromatic hydrocarbons), NPE (nonylphenol and nonylphenolethoxylates), DEHP (di(2-ethylhexyl)phthalate), bisphenol A, and BFR (brominated flame retardants). The materials were prepared from raw sludge without spiking or mixing of different sludges. The study demonstrated that the technique for the preparation of a suitable reference material, sufficiently homogenous and stable, and with concentration levels that answer the needs of the laboratories and the relevant authorities, can now be presented in detail. The results, furthermore, show there is a need for method validation and standardisation of the measurements of NPEs and certain BFR congeners, and that the development of the laboratory structure in Europe, with fewer and more specialised laboratories, might become a major obstacle when trying to find a sufficient number of laboratories being appropriately proficient for this kind of study in the future. KW - Organic pollutants KW - Municipal sludge KW - CRM KW - AOX KW - BPA KW - PAH KW - DEHP KW - NPE KW - BFR PY - 2008 DO - https://doi.org/10.1007/s00769-008-0431-5 SN - 0949-1775 SN - 1432-0517 VL - 13 IS - 10 SP - 553 EP - 562 PB - Springer CY - Berlin AN - OPUS4-18362 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Scharf, Holger A1 - Becker, Roland A1 - Bremser, Wolfram A1 - Buge, Hans-Gerhard A1 - Lück, Detlef T1 - Certification of the mass fractions of trace elements and pentachlorophenol in an impregnated wood reference material JF - Accreditation and quality assurance N2 - The resource-saving utilisation of recovered waste wood is a matter of growing concern. In several European countries, this utilisation is governed by regulations and is dependent on the contents of certain trace elements and organic compounds. Thus, for decisionmaking with respect to waste wood management (recycling or combustion), reliable analytical data are needed and, due to their great economic and environmental impact, must be assured by appropriate quality control. To support the improvement in quality assurance in waste wood analysis, for the first time, a wood reference material was certified for its mass fractions of arsenic, cadmium, chromium, copper, lead, mercury, and pentachlorophenol (PCP). These analytes were selected because they represent typical constituents of wood preservatives most widely used in the past. Material preparation and testing of homogeneity and stability were carried out by BAM Federal Institute for Materials Research and Testing. The certification measurements were performed involving selected laboratories with documented expertise in the field of waste wood analysis. The certified values and their corresponding uncertainties were assigned in full compliance with the requirements of ISO Guide 35. The certified mass fractions and their expanded uncertainties (k/i> = 2) are as follows: (3.1 ± 0.5) mg/kg for As, (3.02 ± 0.24) mg/kg for Cd, (36.4 ± 2.6) mg/kg for Cr, (22.9 ± 1.7) mg/kg for Cu, (0.60 ± 0.14) mg/kg for Hg, (39 ± 4) mg/kg for Pb, and (7.9 ± 0.6) mg/kg for PCP. The certified material is available as European Reference Material ERM®-CD100. KW - Waste wood KW - Trace elements KW - Pentachlorophenol KW - Certification KW - European reference material PY - 2010 DO - https://doi.org/10.1007/s00769-010-0699-0 SN - 0949-1775 SN - 1432-0517 VL - 15 IS - 11 SP - 613 EP - 619 PB - Springer CY - Berlin AN - OPUS4-22392 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Koch, Matthias A1 - Buge, Hans-Gerhard A1 - Nehls, Irene T1 - Analytik von Mineralölen - Standards für die Kohlenwasserstoff-Analytik JF - GIT : Labor-Fachzeitschrift KW - Kalibrierstandard KW - Diesel KW - Schmieröl KW - Kohlenwasserstoffe KW - GC-FID PY - 2006 SN - 0016-3538 VL - 50 IS - 4 SP - 290 EP - 291 PB - GIT-Verlag CY - Darmstadt AN - OPUS4-12280 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Buge, Hans-Gerhard A1 - Becker, Roland A1 - Scharf, Holger T1 - 11. BAM-Ringversuch "Altlasten" JF - TerraTech : WLB-Supplement für Altlasten und Bodenschutz PY - 2005 SN - 0942-5675 VL - 49 IS - 7-8 SP - TT 10 PB - Vereinigte Fachverl. CY - Mainz AN - OPUS4-10381 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -