TY - JOUR A1 - Weise, Hans-Peter T1 - Die DIN-Farbenkarte und ihre Verwendungsmöglichkeit für das graphische Gewerbe PY - 1954 SN - 0015-7708 VL - 5 IS - 1 SP - 455 EP - 457 PB - Hauptvorstand IG Medien CY - Stuttgart AN - OPUS4-9746 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Weise, Hans-Peter ED - Becker, Gerhard Wilhelm T1 - Farbsysteme und Farbtoleranzen PY - 1973 SP - 437 EP - 440 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9672 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weise, Hans-Peter T1 - Ein Nomogramm mit geradlinien Trägern für projektive Transformationen und seine Anwendung in der Farbmetrik PY - 1954 SN - 0014-7680 VL - 3 IS - 3 SP - 105 EP - 118 PB - Musterschmidt CY - Göttingen AN - OPUS4-9745 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weise, Hans-Peter T1 - Die Ermittlung der Farbkennzeichnung nach der DIN-Farbkarte (DIN 6164) aus den Normfarbwerten und umgekehrt PY - 1955 SN - 0014-7680 VL - 4 IS - 2 SP - 89 EP - 94 PB - Musterschmidt CY - Göttingen AN - OPUS4-9827 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Reiche, I. A1 - Castaing, J. A1 - Calligaro, T. A1 - Salomon, J. A1 - Aucouturier, M. A1 - Reinholz, Uwe A1 - Weise, Hans-Peter T1 - Analyses of hydrogen in quartz and in sapphire using depth profiling by ERDA at atmospheric pressure: Comparison with resonant NRA and SIMS N2 - Hydrogen is present in anhydrous materials as a result of their synthesis and of their environment during conservation. IBA provides techniques to measure H concentration depth profiles allowing to identify various aspects of the materials including the history of objects such as gemstones used in cultural heritage. A newly established ERDA set-up, using an external microbeam of alpha particles, has been developed to study hydrated near-surface layers in quartz and sapphire by non-destructive H depth profiling in different atmospheres. The samples were also analysed using resonant NRA and SIMS. KW - Hydrogen KW - Gemstones KW - ERDA KW - External beam KW - Depth profiling PY - 2006 DO - https://doi.org/10.1016/j.nimb.2006.03.066 SN - 0168-583X SN - 1872-9584 VL - 249 IS - 1-2 SP - 608 EP - 611 PB - Elsevier CY - Amsterdam AN - OPUS4-12844 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weise, Hans-Peter ED - Richter, M. T1 - Vergleich dreier skandinavischer Farbsysteme mit dem der DIN-Farbenkarte PY - 1966 VL - 1 SP - 389 EP - 398 PB - Musterschmidt CY - Göttingen AN - OPUS4-15486 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kühn, Hans-Joachim A1 - Kahlcke, Ole A1 - Brookes, Stephen-Peter T1 - A practicable nominal temperature tolerance for TMF-tests N2 - The aim of this research was to investigate the influence of nominal temperature errors on test results and to develop the nominal temperature tolerance for TMF-tests. This concept was confirmed with series of specially developed TMF-tests with defined temperature errors, performed on one test material (NIMONIC 90) in a temperature range of 400–850 °C. These tests should show the influence of temperature errors on test results with an emphasis on lifetime in comparison with reference tests. It is shown that with a limited number of specimens and only one test material, it is possible to propose a reasonable general temperature tolerance for TMF-tests, valid for a wide range of materials and test conditions. KW - Thermo-mechanical fatigue KW - Temperature tolerance KW - Temperature error KW - Life time PY - 2008 DO - https://doi.org/10.1016/j.ijfatigue.2007.01.057 SN - 0142-1123 VL - 30 IS - 2 SP - 277 EP - 285 PB - Elsevier CY - Oxford AN - OPUS4-16133 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit T1 - Properties of repair mortars - potentials and risks of a tailor-made mixture proportioning N2 - Despite the numerous possibilities to influence the properties of repair mortars by modifications of the mixture proportioning, it is almost impossible to change an individual property without influencing other mortar properties. When optimising a mixture, it has to be decided for each individual case, which of the mortar properties needs to be treated with the highest priority. Most properties can be altered by several different measures, which may vary in effectiveness, side effects and cost efficiency. As the prevention of shrinkage induced constraining cracks is crucial for the durability and Service life of a concrete repair task, in the presented paper special attention is paid to the influences on the mortar’s shrinkage behaviour. On the basis of parameter studies it is shown, how it may be beneficial in certain cases to accept the worsening of some general properties if by this measure another property, which is essential for the individual application task, can be enhanced significantly. In general a tailor-made approach for the mixture proportioning seems beneficial but due to the complexity of the constituents’ interactions in repair mortars, it bears a high risk of unexpected malfunctions. T2 - Concrete-Workshop 'Performance-based specifications for concrete' CY - Leipzig, Germany DA - 14.06.2011 KW - Repair mortar KW - Concrete rehabilitation KW - Repair systems KW - Polymer cement mortar (PCC) KW - Sprayed polymer cement mortar (SPCC) PY - 2011 SN - 978-3-9814523-0-3 SP - 319 EP - 329 AN - OPUS4-23985 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ortwein, Hans-Peter T1 - Untersuchung der Mikrorissbildung in Faserkunststoffverbunden mittels Röntgenrefraktions- und Schallemissionsmessung T2 - 18. Kolloquium Schallemission der DGZfP CY - Wetzlar, Germany DA - 2011-10-27 PY - 2011 AN - OPUS4-24682 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit ED - Drochytka, R. ED - Bohus, S. T1 - Natural stone reprofiling in cultural heritage with modular repair mortars N2 - Whenever the preservation of original substance obtains priority in a restoration task, reprofiling techniques using repair mortars are a welcome solution. For ordinary concrete repair aesthetic aspects are of minor importance whereas for the restoration of natural stone elements they come to the fore. Especially for listed buildings and monuments, historico-cultural and aesthetical interests become the ruling Parameters for planning and execution of restoration tasks. Nevertheless the technical and constructive requirements have to be considered and deterioration processes have to be understood to ensure sustainability and durability of the repair task. Due o differences in the Chemical and mineralogical composition, natural stone provides a vast variety of texture and colour. Also the range of different mechanical and durability related properties is far wider than found with concrete for example. A research project dealing with the development of a modular repair mortar System for natural stone is currently set up at the BAM. To provide the conservator with the best possible options to match colour, texture and technical requirements, the System will be setup on a modular basis. Several different binder Systems on basis of cement, lime and sodium Silicate as well as polymer based Systems are planned, which can be combined with different aggregate compositions and different pigments. To evaluate the mortar performance, test procedures will be defined for tests on mortar samples and on composite specimens. In the paper the experimental Programme will be explained and first results will be presented and discussed. T2 - 2nd WTA - Internaitonal PhD Symposium - Building materials and buidling technology to preserve the built heritage CY - Brno, Czech Republic DA - 06.10.2011 PY - 2011 SN - 978-3-937066-21-9 SN - 0947-6830 N1 - Serientitel: WTA-Schriftenreihe – Series title: WTA-Schriftenreihe IS - 36 SP - 208 EP - 216 PB - WTA Publications AN - OPUS4-24837 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ortwein, Hans-Peter A1 - Trappe, Volker A1 - Bohse, Jürgen A1 - Hickmann, Stefan ED - Grellmann, W. T1 - In-Situ-Messung der Matrixschädigung in kohlenstofffaserverstärktem Kunststoff unter uni- und biaxialer Zugbelastung N2 - Die Restlebensdauerabschätzung von Faserkunststoffverbunden ist ein ungelöstes Problem. Die Beobachtung der Matrixschädigung ist dabei ein vielversprechender Ansatz zur Bewertung des Schädigungszustandes insgesamt. Unter kombinierter Beobachtung mit Röntgenrefraktionsmessungen und Schallemissionsmessung wurden uni- und biaxiale Lasten statisch und zyklisch auf Kohlenstofffaserepoxidharz-Proben aufgebracht. Die uniaxiale Belastung erfolgt mittels einer eigenentwickelten Kompaktprüfmaschine direkt während der Röntgenrefraktions- und Schallemissionsmessung in der Röntgenkammer. Die biaxiale Belastung wird an Modelldruckbehältern ebenfalls mit Schallemissionsmessung durchgeführt. Hier wird der Modelldruckbehälter mit dem Röntgenrefraktionsverfahren periodisch inspiziert. T2 - DVM-Tagung Werkstoffprüfung 2011 - Neue Entwicklungen in der Werkstoffprüfung - Herausforderungen an die Kennwertermittlung CY - Berlin, Germany DA - 01.12.2011 KW - Druckbehälterprüfung KW - CFK KW - Schallemissionsmessung KW - Röntgenrefraktionsmessung KW - Matrixschädigung KW - Faserkunststoffverbund KW - Druckbehälter PY - 2011 SN - 978-3-9814516-1-0 SN - 1861-8154 N1 - Serientitel: DVM-Bericht – Series title: DVM-Bericht IS - 643 SP - 161 EP - 166 AN - OPUS4-24931 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ortwein, Hans-Peter T1 - In-Situ-Messung der Matrixschädigung in kohlenstofffaserverstärktem Kunststoff unter uni- und biaxialer Zugbelastung - In-situ-monitoring of matrix degradation in carbonfiber reinforced plastic under uni- and biaxial tension T2 - DVM-Tagung Werkstoffprüfung 2011 CY - Berlin, Germany DA - 2011-12-01 PY - 2011 AN - OPUS4-25071 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Burkert, Andreas A1 - Lehmann, Jens A1 - Gümpel, P. A1 - Wilbert, Hans-Peter T1 - Edelstahl Rostfrei - Alternativen zu den Standardausteniten N2 - Die Rohstoffpreise sind seit einigen Jahren starken Schwankungen unterworfen und weisen insgesamt eine steigende Tendenz auf. Dies kommt gerade bei den weit ver-breiteten Standardausteniten durch äußerst volatile Legierungszuschläge zum Ausdruck, für die in erster Linie das Legierungselement Nickel (Ni) entscheidend ist. Die-ser Umstand führt bei immer mehr Verarbeitern von Edelstahl Rostfrei in Deutschland zur Suche nach alternativen Edelstahlgüten, um die Wettbewerbsfähigkeit auch zukünftig sicherzustellen. KW - Nichtrostender Stahl KW - Austenit KW - Ferrit KW - Lean Duplex KW - Korrosionsverhalten PY - 2012 SN - 0178-6571 VL - 06 SP - 52 EP - 55 PB - Montan- u. Wirtschaftsverlag GmbH CY - Düsseldorf AN - OPUS4-26030 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ortwein, Hans-Peter T1 - Mikrorissbildung in Faserkunststoffverbunden als Indikator für die Betriebsfestigkeitsvorhersage T2 - Frühjahrssitzung 2011 der DGM/DVM-AG Materialermüdung CY - Kassel, Germany DA - 2011-04-07 PY - 2011 AN - OPUS4-25097 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ortwein, Hans-Peter T1 - Untersuchung des Zwischenfaserrisswachstums in Faserverbundwerkstoffen mit Schallemissions- und Röntgenrefraktionsverfahren T2 - DGZfP-Jahrestagung CY - Bremen, Germany DA - 2011-05-30 PY - 2011 AN - OPUS4-25112 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ortwein, Hans-Peter T1 - Investigation of infinite life in fiber-reinforced-plastics by non-destructive monitoring of micro structural damage processes with x-ray-refraction T2 - MSE 2012 CY - Darmstadt, Germany DA - 2012-09-25 PY - 2012 AN - OPUS4-26609 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ramge, Peter A1 - Proske, T. A1 - Kühne, Hans-Carsten ED - Khayat, K.H. ED - Feys, D. T1 - Segregation of coarse aggregates in self-compacting concrete N2 - A major requirement on self-compacting concrete (SCC) is the resistance to any kind of separation. In the presented studies the segregation behavior of aggregates was analyzed systematically. The rheology of selfcompacting mortars was dealt with at first. Following, the segregation of particles of different size, shape and density in various mortars was examined. The aim was to find an analytical relation to estimate the risk of sedimentation, using the characteristics of the particles and those of the mortars. The classification of the aggregates according to their potential segregation is rather simple. But the description of the segregation resistance of the mortar is much more difficult. It is not possible to evaluate a mortar solely based on the rheological properties. The mixture composition must always be considered as well. Tests on concrete samples were conducted additionally to determine the influence of the overall system of SCC on the sedimentation of the aggregates. T2 - SCC2010 - Design, production and placement of self-consolidating concrete CY - Montreal, Canada DA - 2010-09-26 KW - Rheology KW - Segregation KW - Static yield stress KW - Mixture proportioning KW - Aggregates KW - Rheologie KW - Sedimentation KW - Statische Fließgrenze KW - Mischungszusammensetzung KW - Gesteinskörnung PY - 2010 SN - 978-90-481-9663-0 DO - https://doi.org/10.1007/978-90-481-9664-7_10 N1 - Serientitel: RILEM bookseries – Series title: RILEM bookseries VL - 1 IS - 3 SP - 113 EP - 125 PB - Springer AN - OPUS4-22298 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit ED - Littmann, K. T1 - Parameterstudien zum Einfluss von Rezepturveränderungen auf Schwindverhalten, Rissneigung und Steifigkeit mineralischer Instandsetzungsmörtel T2 - 7. Internationales Kolloquium Industrieböden 2010 CY - Ostfildern, Deutschland DA - 2010-12-14 KW - Betoninstandsetzung KW - Instandsetzungsmörtel KW - Modulare Systeme KW - Haftverbund KW - SPCC KW - PCC PY - 2010 SN - 3-924813-85-X IS - Kap. 2.6 SP - 191 EP - 200 AN - OPUS4-22845 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit T1 - Development of a modular system for the protection and repair of concrete structures KW - Repair mortar KW - Repair systems KW - Polymer cement concrete (PCC) KW - Sprayed polymer cement concrete (SPCC) PY - 2010 SN - 1864-7251 SN - 0947-4498 VL - 16 IS - 4/5 SP - 387 EP - 400 PB - Aedificatio Publ. CY - Freiburg AN - OPUS4-22773 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit T1 - Einfluss ausgewählter Modifikationen der Mischungszusammensetzung auf die Eigenschaften von Instandsetzungsmörteln N2 - Trotz der zahlreichen Möglichkeiten zur Beeinflussung der Mörteleigenschaften durch Mischungsmodifikationen ist es nahezu unmöglich, einzelne Eigenschaften unabhängig von anderen zu verändern. Bei einer Mischungsoptimierung muss im Einzelfall immer entschieden werden, welcher der gewünschten Eigenschaften die höchste Priorität zukommt. Anhand von Parameterstudien wird im vorliegenden Artikel verdeutlicht, wie es für bestimmte Anwendungen sinnvoll sein kann, die Verschlechterung einzelner Eigenschaften zu akzeptieren, wenn dadurch eine für den speziellen Einsatzfall essenzielle Eigenschaft verbessert werden kann. Die komplexen Wechselwirkungen der einzelnen Bestandteile fuhren dazu, dass auch scheinbar widersprüchliche Kombinationen von Zusatzmitteln im Einzelfall erforderlich werden können. Zur Anpassung der meisten Mörteleigenschaften gibt es verschiedene Möglichkeiten der Zielerreichung mit jeweils unterschiedlichen Nebeneffekten. Frisch- und Festmörteleigenschaften sind dabei gleichermaßen zu beachten. KW - Instandsetzungsmörtel KW - Betoninstandsetzung KW - Instandsetzungssysteme KW - Polymer-Zement Beton (PCC) KW - Polymer-Zement Spritzbeton (SPCC) KW - Repair mortar KW - Concrete rehabilitation KW - Repair systems KW - Polymer cement concrete (PCC) KW - Sprayed polymer cement concrete (SPCC) PY - 2011 SN - 1864-7251 SN - 0947-4498 VL - 17 IS - 3/4 SP - 169 EP - 180 PB - Aedificatio Publ. CY - Freiburg AN - OPUS4-24479 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit T1 - Repair mortars for the restoration and reprofiling of natural stone elements in cultural heritage N2 - For the protection of the world's cultural heritage the restoration of listed buildings and monuments is an important task. In many cases the need to repair and reprofile natural stone elements occurs. Repair mortars for such applications have to match historicocultural interests as well as durability related and constructive interests. Currently a research project dealing with the development and optimisation of such mortars is set up at the BAM. Special focus is laid on the possibility of a modular adaption to match a vast variety of stone properties. Besides the development and lab scale testing of the mortar system, an in-situ application will be planned and executed. T2 - EWCHP-2011 - European workshop on cultural heritage preservation CY - Berlin, Germany DA - 26.09.2011 KW - Repair mortar KW - Natural stone KW - Stone restoration KW - Stone reprofiling KW - Modular system KW - Listed buildings and monuments PY - 2011 SN - 978-3-8167-8560-6 SP - 281 EP - 288 AN - OPUS4-24561 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit ED - Rogge, A. ED - Meng, B. T1 - MODINSYS - Entwicklung und Modifikation von Instandsetzungsmörteln für Beton- und Stahlbetonkonstruktionen T2 - 52. DAfStb-Forschungskolloquium CY - Berlin, Germany DA - 07.11.2011 PY - 2011 SN - 978-3-9814281-0-0 SP - 238 EP - 246 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-25178 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit ED - Rogge, A. ED - Meng, B. T1 - Entwicklung von modularen Instandsetzungsmörteln für den Einsatz an denkmalgeschützten Natursteinbauwerken T2 - 52. DAfStb-Forschungskolloquium CY - Berlin, Germany DA - 07.11.2011 PY - 2011 SN - 978-3-9814281-0-0 SP - 247 EP - 255 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-25177 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit ED - Rogge, A. ED - Meng, B. T1 - Rheologie von Instandsetzungsmörteln - aktuelle Untersuchungen mit dem Würpelgerät T2 - 52. DAfStb-Forschungskolloquium CY - Berlin, Germany DA - 07.11.2011 PY - 2011 SN - 978-3-9814281-0-0 SP - 58 EP - 66 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-25192 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit ED - Aguiar, J. B. ED - Jalali, S. ED - Camoes, A. ED - Ferreira, R.M. T1 - MODINSYS modular systems for the protection and repair of concrete structures T2 - 13th International Congress on polymers in concrete - ICPIC 2010 CY - Funchal-Madeira, Portugal DA - 2010-02-11 KW - Betoninstandsetzung KW - Instandsetzungsmörtel KW - Modulare Systeme KW - SPCC KW - PCC KW - Repair mortar KW - Modular systems KW - Concrete rehabilitation PY - 2010 SN - 978-972-99179-4-3 SP - 697 EP - 704 CY - Funchal-Madeira, Portugal AN - OPUS4-20937 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit ED - Stark, J. T1 - Betoninstandsetzung mit modular zusammengesetzten PCC- und SPCC-Mörteln T2 - 17. Ibausil - Internationale Baustofftagung CY - Weimar, Germany DA - 2009-09-23 KW - Betoninstandsetzung KW - Instandsetzungsmörtel KW - Modulare Systeme KW - SPCC KW - PCC PY - 2009 SN - 978-3-00-027265-3 VL - 2 SP - 2-0151 - 2-0156 CY - Weimar AN - OPUS4-20301 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geißler, Peter A1 - Cuéllar, Pablo A1 - Hüsken, Götz A1 - Kühne, Hans-Carsten A1 - Baeßler, Matthias T1 - Insights into compaction grouting for offshore pile foundations N2 - The authors are currently investigating the possibility to apply compaction grouting for offshore pile foundations (Jacket piles as well as monopiles) as a possible retrofitting technique for an optimised foundation concept. In this research project, we are developing a design approach aiming to predict the ideal amount and properties of a grout for a specific soil situation and desired improvement of pile bearing capacity after Installation and during service time. Both numerical and experimental tests have been carried out to investigate the injection process during which a highly viscous grout is injected into the soil under high pressure to displace and compact the surrounding soil without fracturing it. The implicit Material Point Method (MPM) based on a mixed formulation is the numerical technique chosen to deal with the expected large deformations and the arbitrary shape of the developing grout bulb. The usage of MPM prevents both the need of remeshing and the numerical instability induced by extensive mesh distortion. For validation with experimental results, we have constructed a testing chamber with one transparent sidewall. This chamber enables us to observe the injection process directly at the transparent vertical window and to measure the in-plane soil displacements and strains by means of the Digital Image Correlation (DIC) technique. The results already reveal the interrelation of soil and grout properties for a successful usage of this common ground improvement technique. T2 - 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018) CY - Madrid, Spain DA - 18.06.2018 KW - Offshore pile foundation KW - Compaction grouting KW - Material Point Method (MPM) KW - Mixed formulation KW - Digital Image Correlation (DIC) PY - 2018 SN - 978-0-7918-5130-2 SN - 2153-4772 VL - 9 SP - V009T10A013, 1 EP - 9 AN - OPUS4-46004 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ünal, Murat A1 - Ramge, Peter A1 - Kühne, Hans-Carsten T1 - Restoration of dalles de verre concrete glass windows with polymer modified repair mortars N2 - On concrete glazings done in the so called ‘Dalles de Verre’ technique, damages occur frequently in form of cracks, Chips and corroded reinforcement Steel. These glazings, mostly dating back to the 20* Century, are often of art-historical importance. This article focuses on the analysis of occurring damages and their causes and on the development of special repair mortars and repair concepts for these glazings, which were done in a recent research project. On several reference buildings compressive strength, reinforcement location and diameter, carbonation depth as well as moisture and salt profiles were determined exemplarily. At the time of the concrete glass Windows’ construction generally no sufficient care was taken for an adequate concrete covering of the reinforcement. Carbonation-induced reinforcement corrosion is therefore the main cause of the occurring damage. Standards dealing specifically with the repair of Dalles de Verre do not exist. Therefore the polymer modified repair mortar was development according to the German guideline “Protection and Repair of Concrete Structures” (RL SIB, 2001). However due to the unique boundary conditions ofthe Dalles de Verre glazings, thespecifications of this guideline alone are not sufficient, they need to be altered and amended. In the article the individual requirements on repair mortars for different application tasks are described. Furthermore, the development of the mortars’ formulations and of a test specimen for performance tests under realistic conditions is shown. T2 - ASPIC 2012 - 7th Asian symposium on polymers in concrete CY - Istanbul, Turkey DA - 03.10.2012 KW - Rehabilitation of concrete structures KW - Polymer modified repair mortar KW - Special test specimens KW - Durability KW - Carbonation KW - Cultural heritage PY - 2012 SN - 978-975-561-427-4 SP - 397 EP - 404 AN - OPUS4-26774 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ünal, Murat A1 - Kühne, Hans-Carsten A1 - Ramge, Peter T1 - Untersuchungen zur Schadenssituation an Betonglasfenstern und Entwicklung von Betonersatzsystemen zur Instandsetzung N2 - In den 50er Jahren des 20. Jahrhunderts entwickelten sich auch aufgrund kriegsbedingter Zerstörung von zahlreichen Gebäuden neue, experimentelle Formen in Kunst und Architektur. Insbesondere im Kirchenbau wurde besonderer Wert auf die Färb- und Lichtwirkung im Innenraum gelegt. In dieser künstlerischen Bewegung setzte sich auch aus Kostengründen die Idee der Betonverglasungen durch. Diese bestehen vorwiegend aus in Form gegossenen, geschlagenen oder geschnittenen Dickglasstücken, den sogenannten Dalles de Verre. Die Verbindung der einzelnen Elemente erfolgt nicht wie bei traditionellen Kirchenfenstern durch Bleiruten sondern durch Stahlbetoneinfassungen. Unterschieden werden dabei Betonverglasungen in Betonglasgusstechnik und in Formsteintechnik sowie Mischformen beider Techniken. Bedingt durch die Gestaltung der Betonverglasungen entstanden filigrane Bauteile mit geringen Betonüberdeckungen der Bewehrung. An diesen kunsthistorisch bedeutsamen Betonverglasungen treten daher gehäuft Schäden in Form von Rissen, Abplatzungen und korrodierter Bewehrung auf. Im Rahmen eines Forschungsvorhabens beschäftigte sich die BAM Bundesanstalt für Materialforschung und -prüfung mit der Analyse aktueller Schäden und Schadensursachen sowie der Entwicklung von geeigneten Instandsetzungskonzepten. Unter Beachtung sowohl technischer als auch kunsthistorischer Gesichtspunkte wurden Referenzobjekte zu genaueren Untersuchungen ausgewählt. Nach Rücksprache mit den zuständigen Denkmalschutzbehörden und Kirchengemeinden erfolgte eine Dokumentation der Bauwerks- und Schadenssituation der ausgewählten Referenzobjekte in Deutschland und dem europäischen Ausland. T2 - 18. Ibausil - Internationale Baustofftagung CY - Weimar, Germany DA - 12.09.2012 PY - 2012 SN - 978-3-00-034075-8 VL - 2 IS - 3.07 SP - 904 EP - 911 AN - OPUS4-26668 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weise, Hans-Peter A1 - Görner, Wolf A1 - Hedrich, Martina T1 - Determination of elements by nuclear analytical methods N2 - Zusammenfassung The working principle of nuclear analytical methods (NAMs) is not influenced by the chemical bond. Consequently, they are independent counterparts to the well-known chemical procedures. NAMs obey fundamental laws or can be described and understood thoroughly. This qualifies them as candidates for reference methods. Although following similar nuclear reaction schemes, they comprise bulk analyzing capability (neutron and photon activation analysis) as well as detection power in surface near regions of solids (ion beam techniques). Prominent features of NAMs are sensitivity, selectivity, multielement determination and linearity of the calibration function covering a concentration range of several orders of magnitude. Moreover, ion beam techniques allow depth profiling with nm-resolution in several cases while the ion microprobe additionally offers a lateral resolution in the wm-scale. As NAMs require expensive apparatus (nuclear reactor, accelerator in radioactive control areas) their availability is restricted to a small number of suitably equipped institutes. However, they are able to solve complex analytical tasks, take part in key comparisons and play an essential role in the certification of reference materials. KW - Nuclear Analytical Methods PY - 2001 DO - https://doi.org/10.1007/s002160000626 SN - 0937-0633 VL - 369 IS - 1 SP - 8 EP - 14 PB - Springer CY - Berlin AN - OPUS4-843 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalbe, Ute A1 - Berger, Wolfgang A1 - Eckardt, Jürgen A1 - Christoph, Gabriele A1 - Walzel, Hans-Peter T1 - Soil water investigations based on laboratory tests T2 - Eurosoil 2004 CY - Freiburg, Germany DA - 2004-09-04 PY - 2004 SP - 1(?) EP - 5(?) AN - OPUS4-4576 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Berger, Wolfgang A1 - Kalbe, Ute A1 - Eckardt, Jürgen A1 - Christoph, Gabriele A1 - Walzel, Hans-Peter T1 - Column tests for studying leaching behaviour of PAH's in soil T2 - ConSoil 2005 - 9th International FZK/TNO Conference on Soil-Water Systems CY - Bordeaux, France DA - 2005-10-03 KW - Leaching behaviour KW - PAH KW - Contaminated soil KW - Leachate prognosis KW - Column tests PY - 2005 SN - 3-923704-50-X SP - 827 EP - 832 PB - Fiz Technik CY - Karlsruhe AN - OPUS4-11735 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Berger, Wolfgang A1 - Kalbe, Ute A1 - Eckardt, Jürgen A1 - Christoph, Gabriele A1 - Grabner, Angela A1 - Walzel, Hans-Peter T1 - Einfluss experimenteller Randbedingungen auf die Schadstoff-Freisetzung bei Säulenperkolationsversuchen KW - Saugkerzen KW - Sickerwasserprognose KW - PAK KW - MKW KW - Altlastenstandorte PY - 2007 SN - 0343-107x VL - 110 IS - 2 SP - 583 EP - 584 PB - Deutsche Bodenkundliche Gesellschaft CY - Göttingen AN - OPUS4-16514 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Li, Changchao A1 - Jin, Ling N. A1 - Bank, Michael S. A1 - Fan, Chunlan A1 - Gillings, Michael R. A1 - Zhao, Tingting A1 - Han, Yong A1 - Chen, Tian A1 - Gao, Meng A1 - Zhu, Dong A1 - Chen, Qinglin A1 - Zhu, Guibing A1 - Wang, Jie A1 - Wang, Lei A1 - Liu, Jian A1 - Yuan, Xianzheng A1 - Huang, Qishen A1 - Wang, Xiaofei A1 - Jahnke, Annika A1 - Brahney, Janice A1 - Allen, Steve A1 - Arp, Hans Peter H. A1 - Oberbeckmann, Sonja A1 - Bergmann, Melanie A1 - Pointing, Stephen B. A1 - Zhang, Daizhou A1 - Rillig, Matthias C. T1 - Potential planetary health impacts of the airborne plastisphere N2 - Microplastics are a ubiquitous yet long-overlooked component of airborne particulate matter. The surface of these plastic particles provides a unique niche for microorganisms, collectively known as the plastisphere. The plastisphere in aquatic and terrestrial ecosystems harbors microbial communities with distinct compositions, structures, and functional profiles, posing potential planetary health risks. The characteristics, fate, and impacts of the microbiome associated with airborne microplastics, however, remain largely unknown. In this review, we fill the knowledge gaps by exploring how airborne microplastics serve as key habitats for microorganisms and the potential planetary health implications. We show that microplastics are expected to carry and sustain microorganisms over long distances and timescales in air, potentially dispersing pathogens, antibiotic-resistance genes, and other bioactive agents across ecosystems. These interactions may perturb ecological processes and biological health on a planetary scale. Interdisciplinary research and innovative methodologies are urgently required to better understand and mitigate the airborne plastisphere risks. KW - Microplastics KW - Microbiome KW - Plastisphere PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-645551 DO - https://doi.org/10.1016/j.oneear.2025.101446 SN - 2590-3322 VL - 8 IS - 10 SP - 1 EP - 17 PB - Elsevier B.V. AN - OPUS4-64555 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ramge, Peter A1 - Kühne, Hans-Carsten ED - Alexander, M. G. ED - Beushausen, H.-D. ED - Dehn, F. ED - Moyo, P. T1 - Investigations on the performance of concrete repair mortars in composite specimen tests N2 - In the scope of a recent research project investigations on the performance of repair mortars for concrete structures were carried out at BAM. One of the key points of the project was the systematic investigation on the mode of action of single constituents and their interactions with Special emphasis on their influence on the mortars’ stiffness and shrinkage behaviour. The mortar’s shrinkage can be the reason of many following problems, which can be a direct result, i.e. the damage of the bond interface caused by constraining forces, or an indirect result, such as an increase in carbonation Depth or chloride penetration due to shrinkage induced constraining cracks, which will subsequently lead to durability problems. Especially when repairing weak Substrate concretes the proper adjustments of the mortar’s stiffness and shrinkage behaviour to the properties of the concrete is of essential importance for functionality and durability of the repair task. T2 - 3rd International conference on concrete repair, rehabilitation and retrofitting III CY - Cape Town, South Africa DA - 03.09.2012 KW - Concrete repair KW - Repair mortar KW - Composite specimen KW - Shrinkage KW - Stiffness KW - Constraining forces KW - Constraining cracks PY - 2012 SN - 978-0-415-89952-9 IS - Theme 3 SP - 1046 EP - 1052 PB - CRC Press CY - London, UK AN - OPUS4-26505 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Ünal, Murat T1 - Entwicklung modularer Steinersatzmassen für Instandsetzung und Reprofilierung von Naturstein im denkmalgeschützten Bereich N2 - Der größtmögliche Erhalt von Originalsubstanz ist das Ziel restauratorischer Maßnahmen, besonders an Denkmälern aus Naturstein. Der überwiegende Anteil der Restaurierungsarbeiten erfolgt in enger Abstimmung mit Denkmalpflegern. Die Objekte mit ihren speziellen Problemstellungen und Schadensbildern stellen höchste Ansprüche an den Restaurator im Hinblick auf die Instandsetzung. Aus technischer Sicht wäre oft eine Vierung, das heißt der Ersatz des beschädigten Steins durch ein neues Steinelement, die technisch zu bevorzugende Lösung. Bei Arbeiten im denkmalgeschützten Bereich sind Reprofilierungstechniken mit Steinersatzmassen jedoch eine sinnvolle Alternative, um möglichst wenig Originalsubstanz zu zerstören oder die Ausbesserung ggf. auch wieder entfernen zu können. T2 - 18. Ibausil - Internationale Baustofftagung CY - Weimar, Germany DA - 12.09.2012 KW - Instandsetzungsmörtel KW - Steinersatzmasse KW - Naturstein KW - Steininstandsetzung KW - Reprofilierung KW - Modulares System KW - Denkmalschutz PY - 2012 SN - 978-3-00-034075-8 VL - 2 IS - 3.07 SP - 2-1123 EP - 2-1130 AN - OPUS4-26548 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ramge, Peter A1 - Kühne, Hans-Carsten ED - Alexander, M. G. ED - Beushausen, H.-D. ED - Dehn, F. ED - Moyo, P. T1 - Development of repair mortars for the restoration of natural stone in cultural heritage N2 - Compared with concrete repair, the repair of natural stone is generally a similar task but at the same time very different. For listed buildings and monuments, historical, cultural and aesthetical interests become the ruling parameters. Especially from the demands of total reversibility of repair measures and strict prevention of the slightest original substance loss, which are not known in concrete repair, various restrictions are derived. From an aesthetical point of view, the same appearance as the original stone is desired for the mortar, whereas from a technical point of view, a monolithic behaviour of the repaired stone with homogeneous material properties would be favoured. This creates a need for a multitude of different property combinations and the whish for an independent adjustability of technical and aesthetical properties. A research project dealing with the development and optimisation of modular Stone repair mortars is currently carried out at BAM Federal Institute for Materials Research and Testing. T2 - 3rd International conference on concrete repair, rehabilitation and retrofitting III CY - Cape Town, South Africa DA - 03.09.2012 KW - Repair mortar KW - Natural stone KW - Stone restoration KW - Stone reprofiling KW - Modular system KW - Cultural heritage PY - 2012 SN - 978-0-415-89952-9 IS - Theme 3 SP - 882 EP - 887 PB - CRC Press CY - London, UK AN - OPUS4-26506 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ramge, Peter A1 - Kühne, Hans-Carsten ED - Kusterle, W. T1 - Entwicklung und Modifikation von PCC- und SPCC-Mörteln für die Betoninstandsetzung T1 - Entwicklung und Modifikation von PCC- und SPCC-Mörteln für die Betoninstandsetzung T2 - Spritzbeton - Tagung 2012 CY - Alpbach, Tirol, Austria DA - 12.01.2012 PY - 2012 SP - 1 EP - 18 AN - OPUS4-25389 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ramge, Peter A1 - Ünal, Murat A1 - Kühne, Hans-Carsten T1 - Polymer modified repair mortars for the restoration of natural stone in cultural heritage N2 - A research project dealing with the development and optimisation of modular repair mortars for natural stone is currently carried out at the BAM (Federal Institute of Materials Research and Testing). To provide the conservator with the best possible options to match colour, texture and technical requirements of the stone, the repairmortar System will be Setup on a modular basis. Different binder Systems are planned, which can be combined with different aggregate compositions and different pigments. The aim is to be able to modify the appearance of the mortar independent of ist mechanical properties. When working in the ränge of cultural heritäge, one specific demand is the Option of total reversibility of each repair task. In order to guarantee the reversibility and to ensure that the repair mortar does by no means induce any Damage to the original substance (e.g. by constraining forces), strength and stiffhess of the repairmortar have to be controlled and kept below the respective values of the original natural stone. On the other hand the mortar needs a certain abrasion resistance and durability. To accomplish all these requirements the use of polymer dispersions is very helpful, as they allow the production of low stiffhess mortars with at the same time relatively high flexural strength values. Also investigations on “alternative” modifications known from historical applications such as the use of casein are carried out. T2 - ASPIC 2012 - 7th Asian symposium on polymers in concrete CY - Istanbul, Turkey DA - 03.10.2012 KW - Repair mortar KW - Natural stone KW - Cultural heritage KW - Polymer cement mortar (PCC) KW - Stone restoration KW - Stone reprofiling KW - Casein PY - 2012 SN - 978-975-561-427-4 SP - 415 EP - 422 AN - OPUS4-26775 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Brookes, Stephen-Peter A1 - Kühn, Hans-Joachim A1 - Skrotzki, Birgit A1 - Klingelhöffer, Hellmuth A1 - Sievert, Rainer ED - Pohl, M. T1 - Axial-torsionale thermo-mechanische Ermüdung einer near-Gamma TiAl-Legierung T2 - Tagung "Werkstoffprüfung 2007" CY - Neu-Ulm, Deutschland DA - 2007-11-29 KW - Titanaluminide KW - Thermomechanische Ermüdung (TMF) KW - Mehrachsige Belastung KW - Axial-torsional Belastung KW - von Mises Vergleichsspannung KW - Spröd-Duktil-Übergangstemperatur PY - 2007 SN - 978-3-514-00753-6 SP - 249 EP - 254 PB - Verl. Stahleisen CY - Düsseldorf AN - OPUS4-16318 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schmidt, Wolfram A1 - Ramge, Peter A1 - Kühne, Hans-Carsten T1 - Efecto de las condiciones de almacenamiento del cemento en las propiedades de procesamiento y endurecimiento del hormigón / As consequências das condicoes de armazenamento do cimento nas qualidades do processamento e endurecimento do concreto PY - 2009 SN - 0373-4331 SN - 1865-6528 N1 - Sprachen: Spanisch/Portugiesisch - Languages: Spanish/Portuguese VL - 3 SP - 2 EP - 9 PB - Bauverl. CY - Gütersloh AN - OPUS4-20239 LA - mul AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit ED - Grantham, M. ED - Mechtcherine, V. ED - Schneck, U. T1 - Influence of selected aspects of the mixture proportioning on the performance of repair mortars N2 - Due to the large number of individual constituents, the mixture modification of repair mortar is a complex task. It is almost impossible to change an individual property without influencing other mortar properties. Most properties can be altered by several different measures, which may vary in effectiveness, side effects and cost efficiency. In the presented paper, special attention is paid to the prevention of shrinkage induced constraining cracks, as this is crucial for the durability and service life of a concrete repair task. On the basis of the parameter studies it is shown how it may be beneficial, in certain cases, to accept the worsening of some general properties if by this measure another property, which is essential for the individual application task, can be enhanced significantly. Due to the complexity of the constituents' interactions in repair mortars, even apparently conflicting combinations of admixtures may become necessary. T2 - Concrete solutions 2011 - 4th International conference on concrete repair CY - Dresden, Germany DA - 26.09.2011 KW - Repair mortar KW - Concrete rehabilitation KW - Repair systems KW - Polymer cement concrete (PCC) KW - Sprayed polymer cement concrete (SPCC) PY - 2012 SN - 978-0-415-61-622-5 SP - 451 EP - 459 PB - Taylor & Francis CY - London AN - OPUS4-24567 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schmidt, Wolfram A1 - Ramge, Peter A1 - Kühne, Hans-Carsten T1 - Einfluss der Lagerungsbedingungen von Zement auf die Verarbeitungs- und Erhärtungseigenschaften von Beton = Effect of the storage conditions of cement on the processing and hardening properties of concrete N2 - In Produktionspausen können in Betonwerken nennenswerte Lagerungsintervalle entstehen. Auf Baustellen und in den Instandsetzungen werden Zement- und Trockenmörtelsäcke teilweise über längere Zeiträume gelagert. Auch im Zusammenhang mit Zementimporten und zunehmend filigran abgestimmten Betonrezepturen die bereits bei kleinen Änderungen der Ausgangsstoffe sensibel reagieren, nimmt die Relevanz der Zementlagerung zu. Aus diesem Grund wurde der Einfluss der Zementlagerung auf die Eigenschaften von Betonen in einer Versuchsreihe an der Bundesanstalt für Materialforschung und -prüfung (BAM) ermittelt. KW - Alterung KW - Zement KW - Sulfationengehalt KW - C3A KW - Rheologie KW - Ageing KW - Cement KW - Sulphate ion content KW - Rheology PY - 2009 SN - 0373-4331 SN - 1865-6528 N1 - Sprachen: Deutsch/Englisch - Languages: German/English VL - 75 IS - 6 SP - 10 EP - 17 PB - Bauverl. CY - Gütersloh AN - OPUS4-19747 LA - mul AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ramge, Peter A1 - Ünal, Murat A1 - Kühne, Hans-Carsten ED - Uzoegbo, H.C. ED - Schmidt, Wolfram T1 - Modular repair mortars for natural stone in cultural heritage N2 - For the protection of the world’s cultural heritage the restoration of listed buildings and monuments is an important task. In many cases the need to repair and reprofile natural stone elements occurs. Repair mortars for such applications have to match historico-cultural interests as well as durability related and constructive interests. Currently a research project dealing with the development and optimisation of such mortars is set up at the German Federal Institute of Materials Research and Testing (BAM). To provide the conservatorwith the best possible options to match the colour, texture and technical requirements of the stone, the repair mortar System will be setup on a modular basis. Different binder Systems are planned to be combined with different aggregate compositions and different pigments. By the modular setup the possibility of independent adjustment of mechanical properties and appearance is aimed. In order to guaranty the reversibility and to ensure that the repair mortar does not induce any damage to the original substance, strength and stiffness of the repair mortar have to be well controlled. The use of polymer dispersions is helpful here, as they allow the production of low stiffness mortars with at the same time relatively high flexural strength values. Also investigations on “alternative” modifications known from historical applications such as the use of casein are carried out. Despite the urgency of seemingly more important building tasks, there is also a great demand for natural stone repair in cultural heritage on the African continent. There is a wide ränge of different objects reaching from prehistoric monuments up to colonial architecture, all in different säte of preservations and subjected to a variety of individual environmental ant climatic conditions, which demand individual and adjustable restoration techniques and materials. T2 - ACCTA - International conference on advances in cement and concrete technology in Africa 2013 CY - Johannesburg, South Africa DA - 28.01.2013 KW - Repair mortar KW - Natural stone KW - Cultural heritage KW - Polymer cement mortar (PCC) KW - Stone restoration KW - Stone reprofiling PY - 2013 SN - 978-3-9815360-3-4 SP - 1089 EP - 1098 AN - OPUS4-27768 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ramge, Peter A1 - Schmidt, Wolfram A1 - Kühne, Hans-Carsten ED - Uzoegbo, H.C. ED - Schmidt, Wolfram T1 - Effect of the storage of cement on early properties of cementitious systems N2 - As soon as cement is mixed with water, the hydration reaction starts to set of. The progression of the hydration process is governed by the amount and the availability of water and its possibility to access the unhydrated cement grain surfaces. For a total hydration cement theoretically requires water amounting approximately 0.38 of its own mass. Nevertheless, due to the cement’s highly hygroscopic nature, already the moisture in the ambient air can cause first hydration reactions to set in upon the cement grain surfaces. Such pre-hydration processes have an effect on the cement's properties. Dpending on the specific conditions during the storage the significance of the impact on certain properties can vary. If cement is consumed soon after production and is transported only short distances in a silo wagon to its final destination for immediate use without further stock transfer, the effects are rather negligible. However, if cement is delivered in bags, transported over long distances, shifted serval times and stored for longer time periods until it is finally consumend, these effects can be quite severe. Due to the actual logistical situation with comparably few cement plants, large delivery distances and partially less developed infrastructures, the latter scenario pictures the situation for the most cases in Africa quite well. In order to verify the relevance of the pre-hydation for practical application, a series of tests was conducted at the German Federal Institute for Materials Research and Testing (BAM). The influence of the cement storage on gresh and hardened concrete properties was investigated for different concrete and mortar types. The investigations show that the impact of the storage conditions is more pronounced for specialized concretes with high sophisticated optimized mixture compositions containing admixtures. Nevertheless, the effects also occur for ordinary concrete and should not be ignored. T2 - ACCTA - International conference on advances in cement and concrete technology in Africa 2013 CY - Johannesburg, South Africa DA - 28.01.2013 KW - Cement KW - Storage KW - Ambient conditions KW - Hydration KW - Pre-hydration KW - Atmospheric humidity PY - 2013 SN - 978-3-9815360-3-4 SP - 339 EP - 347 AN - OPUS4-27757 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geißler, Peter A1 - Schwarz, Johannes A1 - Cuéllar, Pablo A1 - Hüsken, Götz A1 - Baeßler, Matthias A1 - Kühne, Hans-Carsten A1 - Morrone, C. T1 - Compaction grouting to improve the pile bearing capacity in non-cohesive soil N2 - The aim of an ongoing research project is to develop a design approach for typical offshore driven piles (e.g. Jacket piles) based on the application of injections by compaction grouting directly at the pile shaft. The paper aims to present the results of laboratory and in-situ tests, which reveal the efficiency and the promising potential of the optimised foundation concept for a more economic dimensioning of pile foundations and to increase their bearing capacity in non-cohesive soil at any moment after installation. T2 - Twenty-ninth International Ocean and Polar Engineering Conference CY - Honolulu, HI, USA DA - 16.06.2019 KW - Offshore Pile Foundation KW - Compaction Grouting KW - Grout KW - Injection Sequence KW - Tensile Capacity PY - 2019 SN - 978-1-880653-85-2 SN - 1098-6189 VL - II SP - 2178 EP - 2184 PB - International Society of Offshore and Polar Engineers (ISOPE) CY - Cupertino, California, USA AN - OPUS4-48505 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Uckert, Danilo A1 - Matzak, Kathrin A1 - Kühn, Hans-Joachim A1 - Rehmer, Birgit A1 - Peter, Frauke A1 - Fedelich, Bernard A1 - Falkenberg, Rainer A1 - Haftaoglu, Cetin A1 - Kindrachuk, Vitaliy A1 - Skrotzki, Birgit T1 - TMF-Lebensdauerberechnung ATL-Heißteile II - Erweiterung bestehender Werkstoff- und Rechenmodelle zur Lebensdauervorhersage für Abgasturbolader-Heißteile unter thermomechanischer Ermüdungsbeanspruchung (Abschlussbericht) N2 - In diesem Forschungsvorhaben erfolgte eine Überprüfung der Übertragbarkeit der Werkstoff- und Rechenmodelle für die Lebensdauervorhersage von ATL-Heißteilen unter TMF-Beanspruchung auf eine andere Werkstoffklasse als im Vorgängervorhaben, d.h. auf das austenitische Gusseisen EN-GJSA-XNiSiCr35-5-2 (Ni-Resist D-5S). Zunächst wurde dafür eine experimentelle Datenbasis geschaffen, da diese vor Beginn des Vorhabens nicht ausreichend war. Dazu wurden Zug-, Kriech-, LCF- und TMF-Versuche durchgeführt, die der Kalibrierung der Modelle dienten. Das Spannungs-Verformungs-Verhalten und die Lebensdauer in den LCF- und TMF-Versuchen werden durch das Modell auch für den neuen Werkstoff überwiegend gut beschrieben. LCF-Versuche mit Haltezeit bei 900 °C sowie IP-TMFVersuche mit einer Obertemperatur von 900 °C werden weniger gut vorhergesagt, da sich der Schädigungsmechanismus ändert. Eine Verifikation des Modells erfolgte mit Hilfe eines Bauteilversuchs an einem Abgassammler. Die überwiegende Anzahl der experimentell ermittelten Rissorte wurden von dem Modell vorhergesagt. Ein wesentliches Ziel des Vorhabens war, den Einfluss von HCF-Schwingungen auf die TMF-Lebensdauer vertieft experimentell zu untersuchen und das bereits bestehende Lebensdauermodell auf HCF-Überlagerung zu erweitern. Es wurde ein bruchmechanisch motivierter Ansatz entwickelt, in dem die Lebensdauerminderung durch die im TMF-Zyklus überlagerten HCF-Schwingungen abgebildet wird. Mit diesem Ansatz lassen sich die Lebensdauern sowohl für den Werkstoff SiMo 4.05 als auch für den Ni-Resist in guter Übereinstimmung mit dem Experiment Vorhersagen. Das Ziel des Forschungsvorhabens ist erreicht worden. PY - 2015 IS - 1082 SP - 1 EP - 168 CY - Frankfurt/Main AN - OPUS4-35112 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Brookes, Stephen-Peter A1 - Kühn, Hans-Joachim A1 - Skrotzki, Birgit A1 - Klingelhöffer, Hellmuth A1 - Sievert, Rainer A1 - Pfetzing, J. A1 - Eggeler, G. ED - K. Maruyama, ED - M. Niinomi, ED - S. Akiyama, ED - M. Ikeda, ED - M. Hagiwara, T1 - Axial-torsional thermo-mechanical fatigue of Ti-45 Al-5Nb-0.2B-0.2C T2 - 11th World Conference on Titianium (JIMIC 5) CY - Kyoto, Japan DA - 2007-06-03 KW - Gamma titanium aluminide KW - Thermo-mechanical fatigue KW - TMF KW - Axial-torsional loadings KW - Microstructure PY - 2007 SN - 978-4-88903-406-6 VL - 1 SP - 679 EP - 682 PB - Japan Institute of Metals CY - Kyoto AN - OPUS4-16669 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Skrotzki, Birgit A1 - Uckert, Danilo A1 - Matzak, Kathrin A1 - Kühn, Hans-Joachim A1 - Rehmer, Birgit A1 - Peter, Frauke A1 - Fedelich, Bernard A1 - Falkenberg, Rainer A1 - Haftaoglu, Cetin A1 - Kindrachuk, Vitaliy T1 - Erweiterung bestehender Werkstoff- und Rechenmodelle zur Lebensdauervorhersage für Abgasturbolader-Heißteile unter thermomechanischer Ermüdungsbeanspruchung N2 - In diesem Forschungsvorhaben erfolgte eine Überprüfung der Übertragbarkeit der Werkstoff- und Rechenmodelle für die Lebensdauervorhersage von ATL-Heißteilen unter TMF-Beanspruchung auf eine andere Werkstoffklasse, d. h. auf eine austenitische Gusseisenlegierung mit Kugelgraphit. Dafür wurde die Legierung EN-GJSA-XNiSiCr35-5-2 (Ni-Resist D-5S) ausgewählt. Zunächst wurde für diesen Werkstoff eine experimentelle Datenbasis geschaffen, da diese vor Beginn des Vorhabens nicht ausreichend war. Dazu wurden Zug-, Kriech-, LCF- und TMF-Versuche durchgeführt, die der Kalibrierung der Modelle dienten. Unter TMF-Belastung zeigte der untersuchte Werkstoff ein stark abweichendes Verhalten von den im vorangegangenen Vorhaben untersuchten ferritischen SiMo-Legierungen: Der Werkstoff Ni-Resist zeigte insgesamt eine vergleichbare Festigkeit unter OP- und IP-Bedingungen, während die ferritischen Legierungen unter IP-Beanspruchung eine deutlich höhere Festigkeit aufweisen. Mit zunehmenden Temperaturen und Haltezeiten unter Zugspannungen wurden dagegen beim Werkstoff Ni-Resist Hinweise auf Kriechschädigung gefunden, die schädigungsrelevant sind. Auch dies ist ein deutlicher Unterschied zu den SiMo-Legierungen. Das Spannungs-Verformungs-Verhalten in den LCF- und TMF-Versuchen wird durch das Modell auch für den neuen Werkstoff überwiegend gut beschrieben. Das Gleiche gilt für die Lebensdauervorhersage, die mit Ausnahme der Prüftemperatur 900 °C innerhalb eines Fak-tors zwei liegt. Eine Verifikation des Modells erfolgte mit Hilfe eines Bauteilversuchs an einem Abgassammler, der abwechselnd mit heißem und kaltem Gas durchströmt wurde. Ziel der Bauteilsimulation war insbesondere die Vorhersage der Rissbildungsorte. Eine Vorhersage der exakten Lebensdauer wurde nicht erwartet, da das Bauteil mit einer Gusshaut behaftet war, während die für die Kalibrierung des Lebensdauermodells verwendeten Versuche an bearbeiteten, glatten Proben ohne Gusshaut durchgeführt wurden. Die überwiegende Anzahl der experimentell ermittelten Rissorte wurden vorhergesagt. Schließlich war ein wesentliches Ziel des Vorhabens, den Einfluss von HCF-Schwingungen auf die TMF-Lebensdauer vertieft experimentell zu untersuchen und das bereits bestehende Lebensdauermodell auf HCF-Überlagerung zu erweitern. Dazu wurde zunächst die Daten-basis aus dem Vorgängervorhaben am Bespiel von SiMo 4.05 deutlich ausgebaut, um die verschiedenen Einflussparameter zu erfassen. Es wurde ein Ansatz entwickelt, in dem die Lebensdauerminderung durch die überlagerten HCF-Schwingungen abgebildet wird. Dabei wird davon ausgegangen, dass ab einer bestimmten Risstiefe die Überlagerung der HCF-Schwingungen die Rissausbreitung stark beschleunigt. Der Zeitpunkt, wann diese Beschleunigung eintritt, wird als maßgeblich für die Lebensdauerminderung angesehen. Mit diesem Ansatz lassen sich die Lebensdauern für beide Werkstoffe in guter Übereinstimmung mit dem Experiment vorhersagen. T2 - Informationstagung Turbomaschinen, Frühjahr 2016 CY - Bad Neuenahr, Germany DA - 13.04.2016 KW - Ermüdung KW - LCF KW - Modellierung KW - Schädigung KW - Simulation KW - TMF PY - 2016 VL - Heft R575 SP - 1 EP - 35 AN - OPUS4-35823 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Uckert, Danilo A1 - Matzak, Kathrin A1 - Kühn, Hans-Joachim A1 - Rehmer, Birgit A1 - Peter, Frauke A1 - Fedelich, Bernard A1 - Skrotzki, Birgit T1 - Erweiterung bestehender Werkstoff- und Rechenmodelle zur Lebensdauervorhersage für Abgasturbolader-Heißteile unter thermomechanischer Ermüdungsbeanspruchung T2 - Informationstagung Turbomaschinen - Frühjahrstagung 2014 CY - Magdeburg, Germany DA - 2014-03-27 KW - TMF-Lebensdauerberechnung KW - ATL-Heißteile PY - 2014 IS - R567 SP - 147 EP - 175 AN - OPUS4-30489 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ortwein, Hans-Peter A1 - Bohse, Jürgen A1 - Trappe, Volker A1 - Hickmann, Stefan T1 - Untersuchung des Zwischenfaserrisswachstums in Faserverbundwerkstoffen mit Schallemissions- und Röntgenrefraktionsverfahren N2 - Hinsichtlich Materialermüdung und Betriebsfestigkeit in Faserkunststoffverbunden besteht - verglichen mit anderen Aspekten des Faserverbundleichtbaues – noch erheblicher Forschungsbedarf. Schon weit vor den globalen Festigkeiten des Laminates treten eine Vielzahl von Zwischenfaserbrüchen und vereinzelte Faserbrüche auf. Die Dichte dieser Mikrorisse soll hier als Indikator für den Zustand des Verbundes genutzt werden. Ihre Ermittlung stellt insbesondere bei Kohlenstofffasern eine Herausforderung dar. Über vergleichende Messungen mit der Schallemissionsanalyse (SEA) und der Röntgenrefraktionsscans (RR) wird die Entwicklung der Rissdichte bei Belastung untersucht. Die SEA zeichnet die Entstehung der Risse auf und kann wegen der kompakten Messtechnik auch gut am Bauteil eingesetzt werden. Die RR beobachtet die Änderung der inneren Grenzflächen, die ebenfalls die Entwicklung der Rissdichte widerspiegelt. Sie ist allerdings zurzeit nur als Laborverfahren geeignet. Der Vortrag berichtet(e) über den aktuellen Stand des vergleichenden Einsatzes beider Verfahren an Flachproben und innendruckbelasteten Rohrproben. T2 - DGZfP-Jahrestagung 2011 CY - Bremen, Deutschland DA - 30.05.2011 KW - Schallemissionsprüfung KW - Röntgenrefraktionsmessung KW - Faserkunstoffverbund KW - Druckbehälter PY - 2011 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-248913 SN - 978-3-940283-33-7 SP - Mi.4.A.1 - 1 EP - 8 PB - Deutsche Gesellschaft für Zerstörungsfreie Prüfung (DGZfP) AN - OPUS4-24891 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ortwein, Hans-Peter A1 - Bohse, Jürgen A1 - Trappe, Volker T1 - Untersuchung der Mikrorissbildung in Faserkunststoffverbunden mittels Röntgenrefraktions- und Schallemissionsmessung N2 - Hinsichtlich Materialermüdung in Faserkunststoffverbunden besteht verglichen mit anderen Aspekten des Faserverbundleichtbaues – noch erheblicher Forschungsbedarf. Schon weit vor den globalen Festigkeiten des Laminates treten eine Vielzahl von Zwischenfaserbrüchen und vereinzelte Faserbrüche auf. Die Dichte dieser Mikrorisse soll als Indikator für den Zustand des Verbundes genutzt werden. Ihre Ermittlung stellt insbesondere bei Kohlenstofffasern eine Herausforderung dar. Über vergleichende Messungen mit der Schallemissionsanalyse (SEA) und der Röntgenrefraktionsanalyse (RR) wird die Entwicklung der Rissdichte bei Belastung untersucht. die SEA zeichnet die Entstehung der Risse auf und kann wegen der kompakten Messtechnik auch gut am Bauteil eingesetzt werden Die RR beobachtet die Änderung der inneren Grenzflächen, die ebenfalls eine Entwicklung der Rissdichte widerspiegelt. Sie ist allerdings zurzeit nur als Laborverfahren geeignet. Der Vortrag berichtet über den aktuellen Stand des vergleichenden Einsatzes beider Verfahren an Zugproben und Modellbehältern. T2 - 18. Kolloquium Schallemission CY - Wetzlar, Deutschland DA - 27.10.2011 KW - Schallemissionsprüfung KW - Röntgenrefraktionsmessung KW - Faserkunststoffverbund KW - Druckbehälter PY - 2011 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-248926 SN - 978-3-940283-37-5 VL - 131 SP - V05-1 EP - 7 AN - OPUS4-24892 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -