TY - JOUR A1 - Stockhausen, K. A1 - Bögl, W. A1 - Jahn, Marcus A1 - Weise, Hans-Peter T1 - Gamma-Bestrahlung von Stärke in wäßriger Lösung und in Gegenwart von Sauerstoff - Untersuchung über die Bildung von organischen Peroxyverbindungen PY - 1978 SN - 0038-9056 SN - 1521-379X VL - 30 IS - 1 SP - 1 EP - 4 PB - Verl. Chemie CY - Weinheim, Bergstr. AN - OPUS4-9009 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weise, Hans-Peter T1 - A simple filter method for measuring peak voltage and inherent filtration of pulsating potential X-ray machines PY - 1978 SN - 0017-9078 SN - 1538-5159 VL - 34 SP - 483 EP - 486 PB - Lippincott, Williams & Wilkins CY - Hagerston, Md. AN - OPUS4-9011 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heidt, Heinrich A1 - Weise, Hans-Peter A1 - Schnitger, Dierk T1 - Determination of instrument properties of X-ray installations as a contribution to the radiography objectification T2 - 9th World Conference on Nondestructive Testing CY - Melbourne, Australia DA - 1979-11-19 PY - 1979 IS - 4C.1 SP - 1 EP - 7(?) CY - Cannes AN - OPUS4-9184 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Stockhausen, K. A1 - Bögl, W. A1 - Weise, Hans-Peter ED - Reich, H. T1 - Die strahleninduzierte Chemilumineszenz von festen Polyalkoholen als gewebeäquivalentes Dosimetersystem für energiereiche Strahlung T2 - 10. Wissenschaftliche Tagung der Deutschen Gesellschaft für Medizinische Physik CY - Braunschweig, Deutschland DA - 1979-05-16 PY - 1979 SN - 3-7785-0612-9 SP - 199 EP - 204 PB - Hüthig CY - Heidelberg AN - OPUS4-9202 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weise, Hans-Peter A1 - Segebade, Christian T1 - Use of Low Energy Photon Spectroscopy in Activation Analysis of Noble Metals with High-Energy Bremsstrahlung PY - 1979 SN - 0134-0719 SN - 0022-4081 VL - 49 IS - 1 SP - 95 EP - 102 PB - Elsevier Sequoia CY - Lausanne AN - OPUS4-9205 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Heidt, Heinrich A1 - Weise, Hans-Peter A1 - Schnitger, Dierk T1 - Bestimmung von Geräteeigenschaften technischer Röntgenanlagen als Beitrag zur Objektivierung der Durchstrahlungsprüfung PY - 1980 SN - 0025-5300 VL - 22 IS - 5 SP - 211 EP - 213 PB - Carl Hanser Verlag CY - München AN - OPUS4-9415 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Heinrich, Hans-Jürgen A1 - Conrad, Dietrich A1 - Wegener, Wolfgang A1 - Leuschke, Günter A1 - Wandrey, Peter-Andreas ED - Kelker, H. ED - Bartholomé, E. ED - Ullmann, F. T1 - Sicherheitstechnische Kennwerte brennbarer Gase, Dämpfe und Stäube PY - 1980 SN - 3-527-20005-3 N1 - Serientitel: Ullmanns Encyklopädie der technischen Chemie – Series title: Ullmanns Encyklopädie der technischen Chemie IS - 5 SP - 971 EP - 982 PB - Verl. Chemie CY - Weinheim AN - OPUS4-9328 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heumos, K. A1 - Kowalewsky, Helmut A1 - Weise, Hans-Peter T1 - Investigation of Gas Leakage from Sealing Constructions at Containments for Radioactive Materials T2 - 6th International Symposium on Packaging and Transportation of Radioactive Materials CY - Berlin, Germany DA - 1980-11-10 PY - 1980 VL - 6 IS - 4 SP - 210 EP - 213 CY - Springfield, Va. AN - OPUS4-9429 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Segebade, Christian A1 - Fusban, H.-U. A1 - Weise, Hans-Peter T1 - Analysis of some toxic components of environmental samples by high energy photon activation PY - 1980 SN - 0134-0719 SN - 0022-4081 VL - 59 IS - 2 SP - 399 EP - 405 PB - Elsevier Sequoia CY - Lausanne AN - OPUS4-9437 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weise, Hans-Peter T1 - Spektroskopische Meßverfahren zur Beurteilung der Geräteeigenschaften technischer Röntgenanlagen PY - 1980 SN - 0025-5300 VL - 22 IS - 7 SP - 300 EP - 303 PB - Carl Hanser Verlag CY - München AN - OPUS4-9439 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schrimmer, Peter A1 - Lösche, Hans A1 - Gogolin, Bernd ED - Becker, Gerhard Wilhelm T1 - Untersuchungen an Hüllgetrieben PY - 1973 SP - 45 EP - 48 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9574 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weise, Hans-Peter T1 - Die DIN-Farbenkarte und ihre Verwendungsmöglichkeit für das graphische Gewerbe PY - 1954 SN - 0015-7708 VL - 5 IS - 1 SP - 455 EP - 457 PB - Hauptvorstand IG Medien CY - Stuttgart AN - OPUS4-9746 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Weise, Hans-Peter ED - Becker, Gerhard Wilhelm T1 - Farbsysteme und Farbtoleranzen PY - 1973 SP - 437 EP - 440 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9672 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weise, Hans-Peter T1 - Ein Nomogramm mit geradlinien Trägern für projektive Transformationen und seine Anwendung in der Farbmetrik PY - 1954 SN - 0014-7680 VL - 3 IS - 3 SP - 105 EP - 118 PB - Musterschmidt CY - Göttingen AN - OPUS4-9745 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weise, Hans-Peter T1 - Die Ermittlung der Farbkennzeichnung nach der DIN-Farbkarte (DIN 6164) aus den Normfarbwerten und umgekehrt PY - 1955 SN - 0014-7680 VL - 4 IS - 2 SP - 89 EP - 94 PB - Musterschmidt CY - Göttingen AN - OPUS4-9827 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Reiche, I. A1 - Castaing, J. A1 - Calligaro, T. A1 - Salomon, J. A1 - Aucouturier, M. A1 - Reinholz, Uwe A1 - Weise, Hans-Peter T1 - Analyses of hydrogen in quartz and in sapphire using depth profiling by ERDA at atmospheric pressure: Comparison with resonant NRA and SIMS N2 - Hydrogen is present in anhydrous materials as a result of their synthesis and of their environment during conservation. IBA provides techniques to measure H concentration depth profiles allowing to identify various aspects of the materials including the history of objects such as gemstones used in cultural heritage. A newly established ERDA set-up, using an external microbeam of alpha particles, has been developed to study hydrated near-surface layers in quartz and sapphire by non-destructive H depth profiling in different atmospheres. The samples were also analysed using resonant NRA and SIMS. KW - Hydrogen KW - Gemstones KW - ERDA KW - External beam KW - Depth profiling PY - 2006 DO - https://doi.org/10.1016/j.nimb.2006.03.066 SN - 0168-583X SN - 1872-9584 VL - 249 IS - 1-2 SP - 608 EP - 611 PB - Elsevier CY - Amsterdam AN - OPUS4-12844 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weise, Hans-Peter ED - Richter, M. T1 - Vergleich dreier skandinavischer Farbsysteme mit dem der DIN-Farbenkarte PY - 1966 VL - 1 SP - 389 EP - 398 PB - Musterschmidt CY - Göttingen AN - OPUS4-15486 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kühn, Hans-Joachim A1 - Kahlcke, Ole A1 - Brookes, Stephen-Peter T1 - A practicable nominal temperature tolerance for TMF-tests N2 - The aim of this research was to investigate the influence of nominal temperature errors on test results and to develop the nominal temperature tolerance for TMF-tests. This concept was confirmed with series of specially developed TMF-tests with defined temperature errors, performed on one test material (NIMONIC 90) in a temperature range of 400–850 °C. These tests should show the influence of temperature errors on test results with an emphasis on lifetime in comparison with reference tests. It is shown that with a limited number of specimens and only one test material, it is possible to propose a reasonable general temperature tolerance for TMF-tests, valid for a wide range of materials and test conditions. KW - Thermo-mechanical fatigue KW - Temperature tolerance KW - Temperature error KW - Life time PY - 2008 DO - https://doi.org/10.1016/j.ijfatigue.2007.01.057 SN - 0142-1123 VL - 30 IS - 2 SP - 277 EP - 285 PB - Elsevier CY - Oxford AN - OPUS4-16133 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit T1 - Properties of repair mortars - potentials and risks of a tailor-made mixture proportioning N2 - Despite the numerous possibilities to influence the properties of repair mortars by modifications of the mixture proportioning, it is almost impossible to change an individual property without influencing other mortar properties. When optimising a mixture, it has to be decided for each individual case, which of the mortar properties needs to be treated with the highest priority. Most properties can be altered by several different measures, which may vary in effectiveness, side effects and cost efficiency. As the prevention of shrinkage induced constraining cracks is crucial for the durability and Service life of a concrete repair task, in the presented paper special attention is paid to the influences on the mortar’s shrinkage behaviour. On the basis of parameter studies it is shown, how it may be beneficial in certain cases to accept the worsening of some general properties if by this measure another property, which is essential for the individual application task, can be enhanced significantly. In general a tailor-made approach for the mixture proportioning seems beneficial but due to the complexity of the constituents’ interactions in repair mortars, it bears a high risk of unexpected malfunctions. T2 - Concrete-Workshop 'Performance-based specifications for concrete' CY - Leipzig, Germany DA - 14.06.2011 KW - Repair mortar KW - Concrete rehabilitation KW - Repair systems KW - Polymer cement mortar (PCC) KW - Sprayed polymer cement mortar (SPCC) PY - 2011 SN - 978-3-9814523-0-3 SP - 319 EP - 329 AN - OPUS4-23985 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ortwein, Hans-Peter T1 - Untersuchung der Mikrorissbildung in Faserkunststoffverbunden mittels Röntgenrefraktions- und Schallemissionsmessung T2 - 18. Kolloquium Schallemission der DGZfP CY - Wetzlar, Germany DA - 2011-10-27 PY - 2011 AN - OPUS4-24682 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit ED - Drochytka, R. ED - Bohus, S. T1 - Natural stone reprofiling in cultural heritage with modular repair mortars N2 - Whenever the preservation of original substance obtains priority in a restoration task, reprofiling techniques using repair mortars are a welcome solution. For ordinary concrete repair aesthetic aspects are of minor importance whereas for the restoration of natural stone elements they come to the fore. Especially for listed buildings and monuments, historico-cultural and aesthetical interests become the ruling Parameters for planning and execution of restoration tasks. Nevertheless the technical and constructive requirements have to be considered and deterioration processes have to be understood to ensure sustainability and durability of the repair task. Due o differences in the Chemical and mineralogical composition, natural stone provides a vast variety of texture and colour. Also the range of different mechanical and durability related properties is far wider than found with concrete for example. A research project dealing with the development of a modular repair mortar System for natural stone is currently set up at the BAM. To provide the conservator with the best possible options to match colour, texture and technical requirements, the System will be setup on a modular basis. Several different binder Systems on basis of cement, lime and sodium Silicate as well as polymer based Systems are planned, which can be combined with different aggregate compositions and different pigments. To evaluate the mortar performance, test procedures will be defined for tests on mortar samples and on composite specimens. In the paper the experimental Programme will be explained and first results will be presented and discussed. T2 - 2nd WTA - Internaitonal PhD Symposium - Building materials and buidling technology to preserve the built heritage CY - Brno, Czech Republic DA - 06.10.2011 PY - 2011 SN - 978-3-937066-21-9 SN - 0947-6830 N1 - Serientitel: WTA-Schriftenreihe – Series title: WTA-Schriftenreihe IS - 36 SP - 208 EP - 216 PB - WTA Publications AN - OPUS4-24837 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ortwein, Hans-Peter A1 - Trappe, Volker A1 - Bohse, Jürgen A1 - Hickmann, Stefan ED - Grellmann, W. T1 - In-Situ-Messung der Matrixschädigung in kohlenstofffaserverstärktem Kunststoff unter uni- und biaxialer Zugbelastung N2 - Die Restlebensdauerabschätzung von Faserkunststoffverbunden ist ein ungelöstes Problem. Die Beobachtung der Matrixschädigung ist dabei ein vielversprechender Ansatz zur Bewertung des Schädigungszustandes insgesamt. Unter kombinierter Beobachtung mit Röntgenrefraktionsmessungen und Schallemissionsmessung wurden uni- und biaxiale Lasten statisch und zyklisch auf Kohlenstofffaserepoxidharz-Proben aufgebracht. Die uniaxiale Belastung erfolgt mittels einer eigenentwickelten Kompaktprüfmaschine direkt während der Röntgenrefraktions- und Schallemissionsmessung in der Röntgenkammer. Die biaxiale Belastung wird an Modelldruckbehältern ebenfalls mit Schallemissionsmessung durchgeführt. Hier wird der Modelldruckbehälter mit dem Röntgenrefraktionsverfahren periodisch inspiziert. T2 - DVM-Tagung Werkstoffprüfung 2011 - Neue Entwicklungen in der Werkstoffprüfung - Herausforderungen an die Kennwertermittlung CY - Berlin, Germany DA - 01.12.2011 KW - Druckbehälterprüfung KW - CFK KW - Schallemissionsmessung KW - Röntgenrefraktionsmessung KW - Matrixschädigung KW - Faserkunststoffverbund KW - Druckbehälter PY - 2011 SN - 978-3-9814516-1-0 SN - 1861-8154 N1 - Serientitel: DVM-Bericht – Series title: DVM-Bericht IS - 643 SP - 161 EP - 166 AN - OPUS4-24931 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ortwein, Hans-Peter T1 - In-Situ-Messung der Matrixschädigung in kohlenstofffaserverstärktem Kunststoff unter uni- und biaxialer Zugbelastung - In-situ-monitoring of matrix degradation in carbonfiber reinforced plastic under uni- and biaxial tension T2 - DVM-Tagung Werkstoffprüfung 2011 CY - Berlin, Germany DA - 2011-12-01 PY - 2011 AN - OPUS4-25071 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Burkert, Andreas A1 - Lehmann, Jens A1 - Gümpel, P. A1 - Wilbert, Hans-Peter T1 - Edelstahl Rostfrei - Alternativen zu den Standardausteniten N2 - Die Rohstoffpreise sind seit einigen Jahren starken Schwankungen unterworfen und weisen insgesamt eine steigende Tendenz auf. Dies kommt gerade bei den weit ver-breiteten Standardausteniten durch äußerst volatile Legierungszuschläge zum Ausdruck, für die in erster Linie das Legierungselement Nickel (Ni) entscheidend ist. Die-ser Umstand führt bei immer mehr Verarbeitern von Edelstahl Rostfrei in Deutschland zur Suche nach alternativen Edelstahlgüten, um die Wettbewerbsfähigkeit auch zukünftig sicherzustellen. KW - Nichtrostender Stahl KW - Austenit KW - Ferrit KW - Lean Duplex KW - Korrosionsverhalten PY - 2012 SN - 0178-6571 VL - 06 SP - 52 EP - 55 PB - Montan- u. Wirtschaftsverlag GmbH CY - Düsseldorf AN - OPUS4-26030 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -