TY - JOUR A1 - Weise, Hans-Peter A1 - Jost, Peter A1 - Freundt, Wolfgang A1 - Malitte, Hans-Joachim A1 - Schnitger, Dierk T1 - Untersuchung der Energie und Winkelverteilung der Streustrahlung und Ihre Bedeutung für die Durchstrahlungsprüfung PY - 1977 SN - 0025-5300 VL - 19 IS - 10 SP - 420 EP - 423 PB - Carl Hanser Verlag CY - München AN - OPUS4-8790 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neider, Rudolf A1 - Wandelburg, Klaus A1 - Weise, Hans-Peter A1 - Dudzus, Thomas A1 - Fusban, H. A1 - Jost, Peter A1 - Reimers, Peter A1 - Schmitt, B. A1 - Segebade, Christian T1 - Comparison of photon activation analysis with other modern analytical methods as tools for the solution of actual analytical problems T2 - 5th International Conference : Modern trends in activation analysis CY - München, Germany DA - 1976-09-13 PY - 1976 VL - 2 SP - 1396 EP - 1405 CY - College Station, Tex. AN - OPUS4-8555 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Neider, Rudolf A1 - Dudzus, Thomas A1 - Fusban, H. A1 - Jost, Peter A1 - Reimers, Peter A1 - Schmitt, B. A1 - Segebade, Christian A1 - Wandelburg, Klaus A1 - Weise, Hans-Peter T1 - Comparison of photon activation analysis with other modern analytical methods as tools for the solution of actual analytical problems PY - 1977 SN - 0134-0719 SN - 0022-4081 VL - 39 IS - 1-2 SP - 397 EP - 408 PB - Elsevier Sequoia CY - Lausanne AN - OPUS4-8782 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Peter, Hans A1 - Emschermann, Hans-Heinrich T1 - Bewertungsvorgänge bei Exzenterpressen und ihre Bedeutung für die Leistung von Schnittwerkzeugen PY - 1961 IS - 15 PB - Forschungsgesellschaft Blechverarbeitung CY - Düsseldorf AN - OPUS4-10157 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mittmann, Hans-Ulrich A1 - Weise, Hans-Peter T1 - Scattering of Ions - V. Elastic Scattering on the Symmetric Rare Gas Ion - Rare Gas Atom Systems PY - 1974 SN - 0044-3166 VL - 29 SP - 400 EP - 410 PB - Verl. d. Zeitschrift für Naturforschung CY - Tübingen AN - OPUS4-8080 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weise, Hans-Peter A1 - Mittmann, Hans-Ulrich T1 - Scattering of Ions VI - Elastic Scattering of N+ on Ne, Ar, Kr and Xe PY - 1974 SN - 0044-3166 VL - 29 SP - 1143 EP - 1151 PB - Verl. d. Zeitschrift für Naturforschung CY - Tübingen AN - OPUS4-8122 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Emschermann, Hans-Heinrich A1 - Peter, Hans T1 - Untersuchung der Auffederung von Pressen - Messung von Schnittkraft, Auffederung und Schnittstempelweg PY - 1954 SN - 0341-7255 VL - 96 IS - 25 SP - 831 EP - 834 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-9728 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weise, Hans-Peter A1 - Jost, Peter ED - Hacke, J. ED - Borchardt, D. ED - Kaul, A. T1 - Bestimmung der Körperdosis bei externer Strahlenexposition durch Photonenstrahlen (Fallstudie) PY - 1985 SN - 3-87344-074-1 SP - 1 EP - 16 PB - Hoffmann CY - Berlin AN - OPUS4-34253 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kettschau, A. A1 - Goebbels, Jürgen A1 - Reimers, Peter A1 - Weise, Hans-Peter ED - Merz, E. T1 - Possibilities of quality assurance on radioactive waste packages by computertomography and other radiometric techniques T2 - International Seminar on Radioactive Waste Products - Suitability for Final Disposal CY - Jülich, Germany DA - 1985-06-10 PY - 1985 N1 - Serientitel: Berichte der Kernforschungsanlage Jülich – Series title: Berichte der Kernforschungsanlage Jülich IS - 54 SP - 483 EP - 491 PB - Zentralbibliothek der Kernforschungsanlage CY - Jülich AN - OPUS4-34222 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weise, Hans-Peter A1 - Jost, Peter T1 - Shielding against scattered radiation at electron accelerator installations N2 - Shielding data for high energy X-rays scattered from common shielding materials at electron accelerators were determined. The required thickness of secondary protective barriers can be calculated if the intensity and the quality of scattered radiation are known. Therefore the differential exposure albedo of various important materials was measured for primary X-rays in the energy ränge from 10 MeV to 35 MeV using an electron linear accelerator. The quality of secondary X-rays was investigated by measuring the spectra of scattered photons with a Nal-detector. From these spectra the attenuation of scattered X-rays in common shielding materials was computed using transmission factors for monoenergetic photons taken from the literature. The calculations were performed for the limiting cases of broad beam and narrow beam geometry. The results are compared with directly measured attenuation curves and with recommendations given in the literature. PY - 1983 IS - 45 SP - 3 EP - 7 AN - OPUS4-40798 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Jost, Peter A1 - Weise, Hans-Peter T1 - Messung der Luftaktivierung beim Betrieb von Elektronenbeschleunigern und Vergleich mit theoretischen Rechnungen T2 - Jahrestagung des Fachverbandes für Strahlenschutz in Zusammenarbeit mit der Gesellschaft für Strahlenschutz- und Umweltforschung, Institut für Strahlenschutz CY - Neuherberg ; (München) DA - 19.10.1982 PY - 1983 SP - 239 EP - 242 AN - OPUS4-40686 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Witt, Karin A1 - Otto, Peter A1 - Weise, Hans-Peter T1 - Test Colors for Specifying Color Reproduction PY - 1975 SN - 0003-6935 SN - 1539-4522 VL - 14 IS - 8 SP - 1768 EP - 1769 PB - Optical Society of America CY - Washington, DC AN - OPUS4-8313 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Jost, Peter A1 - Weise, Hans-Peter A1 - Freundt, Wolfgang A1 - Mundry, Eberhard A1 - Schnitger, Dierk T1 - Messung, Interpretation und Vergleich der Energieverteilungen von Röntgenstrahlen verschiedener industrieller Röntgenanlagen PY - 1977 SN - 0025-5300 VL - 19 IS - 10 SP - 426 EP - 430 PB - Carl Hanser Verlag CY - München AN - OPUS4-8779 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weise, Hans-Peter A1 - Jost, Peter A1 - Freundt, Wolfgang T1 - Absolute Photonenausbeuten technischer Röntgenanlagen - Vergleich zwischen Theorie und Messung T2 - Europäische Tagung für Zerstörungsfreie Materialprüfung CY - Mainz, Deutschland DA - 1978-04-24 PY - 1978 VL - 3 SP - 63/553 EP - 63/564 PB - Deutsche Gesellschaft für Zerstörungsfreie Prüfung CY - Berlin AN - OPUS4-9012 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weise, Hans-Peter A1 - Jost, Peter A1 - Santer, E. A1 - Wieters, C. U. T1 - High Energy Bremsstrahlung Albedo for Ordinary Concrete and Brick PY - 1979 VL - 29 SP - 3 EP - 5 PB - European Shielding Information Service CY - Ispra AN - OPUS4-9204 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Reimers, Peter A1 - Heidt, Heinrich A1 - Stade, Jürgen A1 - Weise, Hans-Peter T1 - Beispiele für die Anwendung der Computer-Tomographie (CAT) in der zerstörungsfreien Materialprüfung PY - 1980 SN - 0025-5300 VL - 22 IS - 5 SP - 214 EP - 217 PB - Carl Hanser Verlag CY - München AN - OPUS4-9433 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Stade, Jürgen A1 - Weise, Hans-Peter A1 - Reimers, Peter A1 - Heidt, Heinrich T1 - Zerstörungsfreie Materialprüfung mit Computertomographie PY - 1980 SN - 0014-0058 SN - 0367-0716 VL - 33 IS - 8 SP - 384 PB - VCH Verl.-Ges. CY - Weinheim AN - OPUS4-9420 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weise, Hans-Peter A1 - Jost, Peter A1 - Freundt, Wolfgang T1 - Spectra, Differential Albedo and Shielding Data for Bremsstrahlung Scattered from Common Shielding Materials T2 - 5th International Radiation Protection Association = Association internationale de radioprotection CY - Jerusalem, Israel DA - 1980-03-09 PY - 1980 VL - 5 SP - 327 EP - 330 CY - Oxford AN - OPUS4-9440 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Reimers, Peter A1 - Goebbels, Jürgen A1 - Heidt, Heinrich A1 - Weise, Hans-Peter A1 - Wilding, Kay T1 - Röntgen- und Gammastrahlen-Computertomographie N2 - Erklärung der gesetzmäßigen Zusammenhänge zwischen Radiographie, Radiometrie und Computertomographie mit anschließendem Bericht über die Entwicklung und den erreichten Status dieser komplexen Prüftechnik in der BAM. T3 - BAM Forschungsberichtreihe - 101 KW - Schichtaufnahmeverfahren PY - 1984 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-3493 SN - 978-3-88314-327-8 SN - 0938-5533 VL - 101 SP - 1 EP - 36 PB - Wirtschaftsverlag NW CY - Bremerhaven AN - OPUS4-349 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Brookes, Stephen-Peter A1 - Kühn, Hans-Joachim A1 - Skrotzki, Birgit A1 - Klingelhöffer, Hellmuth A1 - Sievert, Rainer A1 - Pfetzing, J. A1 - Peter, D. A1 - Eggeler, G. ED - Kim, Young-Won ED - David Morris, ED - Rui Yang, ED - Christoph Leyens, T1 - Axial-torsional thermo-mechanical fatigue of Ti-45 Al-5Nb-0.2B-0.2C T2 - TMS 2008 Annual Meeting & Exhibition, "Structural Aluminides for Elevated Temperatures - Gamma Titanium and Other Metallic Aluminides" CY - New Orleans, Louisiana, USA DA - 2008-03-09 KW - Titanium Aluminide KW - Thermo-mechanical Fatigue KW - Axial-torsional Loading PY - 2008 SN - 978-0-87339-7209 SP - 103 EP - 109 PB - TMS CY - Warrendale, Pa AN - OPUS4-17904 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Brookes, Stephen-Peter A1 - Kühn, Hans-Joachim A1 - Skrotzki, Birgit A1 - Klingelhöffer, Hellmuth A1 - Sievert, Rainer A1 - Pfetzing, J. A1 - Peter, D. A1 - Eggeler, G. T1 - Axial-torsional thermomechanical fatigue of a near-gamma TiAl-alloy N2 - The uniaxial, torsional and axial-torsional thermomechanical fatigue (TMF) behavior of the near-γ TiAl-alloy TNB-V5 was investigated. TMF tests were performed at 400-800 °C with mechanical strain amplitudes ranging from 0.15% to 0.7%. The tests were conducted thermomechanically in-phase (IP) and out-of-phase (OP). For the same lifetimes, uniaxial IP tests required the highest strain amplitudes, while OP test conditions were most damaging and needed the lowest strain amplitudes. The Mises equivalent mechanical strain amplitudes of pure torsional tests were found in between uniaxial in-phase and out-of-phase tests for the same lifetimes. The non-proportional multiaxial out-of-phase test showed a lower lifetime at the same equivalent mechanical strain amplitude compared to the other types of tests. The microstructure has been characterized applying electron microscopy and microstructural parameters such as fraction of twinned grains, grain size, lamellar distance and dislocation density have been quantified. KW - Gamma titanium aluminide KW - TNB-V5 KW - Thermomechanical fatigue (TMF) KW - Axial-torsional loading KW - Microstructure PY - 2010 DO - https://doi.org/10.1016/j.msea.2010.03.073 SN - 0921-5093 SN - 1873-4936 VL - 527 IS - 16-17 SP - 3829 EP - 3839 PB - Elsevier CY - Amsterdam AN - OPUS4-21289 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Skrotzki, Birgit A1 - Brookes, Stephen-Peter A1 - Kühn, Hans-Joachim A1 - Sievert, Rainer A1 - Klingelhöffer, Hellmuth A1 - Pfetzing, J. A1 - Peter, D. A1 - Eggeler, G. ED - Khan, A. S. ED - Kabirian, F. ED - Liu, J. T1 - Axial-torsional thermo-mechanical fatigue of a near-gamma TiAl-alloy N2 - The uniaxial, torsional and biaxial thermo-mechanical fatigue behavior of γ-TiAl alloy have been examined, at both in-phase (IP) and out-of-phase (OP). OP test conditions were most damaging and needed the lowest strain amplitudes. Pure torsional tests were found in between uniaxial IP and OP tests. The non-proportional multiaxial OP test showed a lower lifetime at the same equivalent mechanical strain amplitude compared to the other types of tests. The microstructure has been characterized applying electron microscopy. T2 - Plasticity '12 - 18th International Symposium on Plasticity and its Current Applications CY - San Juan, PR, USA DA - 03.01.2012 KW - TMF KW - Multiaxial fatigue KW - Titanium aluminides PY - 2012 SN - 0-9659463-0-4 SP - 187 EP - 189 PB - NEAT Press CY - Fulton, MD, USA AN - OPUS4-25325 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Brookes, Stephen-Peter A1 - Kühn, Hans-Joachim A1 - Skrotzki, Birgit A1 - Klingelhöffer, Hellmuth A1 - Sievert, Rainer A1 - Pfetzing, J. A1 - Peter, D. A1 - Eggeler, G. T1 - Multi-Axial Thermo-Mechanical Fatigue Of A Near-Gamma TiAl-Alloy N2 - A material family to replace the current superalloys in aeronautical gas turbine engines is considered to be that of gamma Titanium Aluminide (γ-TiAl) alloys. Structural components in aeronautical gas turbine engines typically experience large variations in temperatures and multiaxial states of stress under non-isothermal conditions. The uniaxial, torsional and bi-axial thermomechanical fatigue (TMF) behaviour of this γ-TiAl alloy have been examined at 400 – 800°C with strain amplitudes from 0.15% to 0.7%. The tests were conducted at both in-phase (IP) and out-ofphase (OP). The effects of TMF on the microstructure were also investigated. For the same equivalent mechanical strain amplitude uniaxial IP tests showed significantly longer lifetimes than pure torsional TMF tests. The non-proportional multiaxial OP test showed the lowest lifetimes at the same equivalent mechanical strain amplitude compared to the other types of tests. KW - Gamma-Titanium Aluminide KW - Thermo-mechanical Fatigue KW - Axial-torsional Loading PY - 2005 DO - https://doi.org/10.4028/3-908454-01-8.283 SN - 1022-6680 SN - 1662-8985 VL - 59 SP - 283 EP - 287 PB - Trans Tech Publ. CY - Zurich AN - OPUS4-18720 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weise, Hans-Peter A1 - Ecker, Klaus A1 - Kowalewsky, Helmut A1 - Wolk, Thomas T1 - Gas permeation through common elastomer sealing materials N2 - Using a quadrupole mass spectrometer system the permeation of D2, He, Ne, Ar, Kr and Xe through EPDM (ethylene-propylene-diene rubber), Viton (fluoro rubber) and Silicone-rubber was measured as a function of temperature. The results for O-ring samples were compared with those for slab geometry. From the measured permeation functions the diffusion coefficients, the permeation coefficients and the solubilities of the gases in the elastomer materials were evaluated using a nonlinear fitting algorithm. The variations of these data with temperature yield the activation energies for diffusion and permeation as well as the heat of solution. The results confirm that the transmission of noble gases and of deuterium through elastomer materials is merely a physical process because the activation energies are far below common values for processes involving chemical reactions. The solubilities correlate well with the boiling temperatures of the gases and with the well depth of the Lennard-Jones interaction potential between the gas atoms. The diffusion coefficients monotonically decrease and the activation energies monotonically increase with increasing molecular diameter of the gases. KW - gas permeation KW - elastomer KW - sealing material PY - 1990 SN - 0391-3155 VL - 20 IS - 2 SP - 225 EP - 230 PB - Tamburini Ed. CY - Milano AN - OPUS4-50600 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weise, Hans-Peter ED - Henning, K. T1 - Strahlenexposition der Bevölkerung in der Umgebung von Beschleunigeranlagen niedriger Energie T2 - 18. Jahrestagung des Fachverbandes für Strahlenschutz CY - Lübeck-Travemünde, Germany DA - 1985-10-06 PY - 1985 N1 - Serientitel: FS-Berichte aus der Schriftenreihe des Fachverbandes für Strahlenschutz – Series title: FS-Berichte aus der Schriftenreihe des Fachverbandes für Strahlenschutz IS - 85-37 SP - 470 EP - 483 PB - Fachverband für Strahlenschutz CY - Würenlingen AN - OPUS4-34252 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Burkert, Andreas A1 - Dygutsch, D.P. A1 - Fischer, Joachim A1 - Wilbert, Hans-Peter T1 - Einsatz und Pflege von Edelstahl Rostfrei in Schwimmbädern - Wo Korrosionserscheinungen und -schäden auftreten und wie sie erfolgreich verhindert werden können N2 - Nichtrostende Stähle gewinnen durch ihre Vielseitigkeit bei Bau, Sanierung und Einrichtung von Schwimmbädern seit einigen Jahren zunehmende Bedeutung. Neben der hohen Korrosionsbeständigkeit vermitteln die überlegenen hygienischen Eigenschaften sowie der geringe Inspektions- und Instandhaltungsaufwand ein beständiges Gefühl von Dauerhaftigkeit und Sicherheit. Voraussetzung dafür ist die richtige Wahl von Werkstoffsorte, Oberfläche, Bauweise und Reinigungstechnik. KW - Edelstahl Rostfrei KW - Nichtrostender Stahl KW - Schwimmhallen KW - Reinigung KW - Pflege PY - 2014 SN - 0340-5540 SN - 0932-3872 IS - 10 SP - 610 EP - 625 PB - Dt. Ges. für das Badewesen CY - Essen AN - OPUS4-31608 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weise, Hans-Peter T1 - Berechnung der Strahlenexposition in der Umgebung von Schwerionen-Beschleunigeranlagen T2 - Gemeinsame Strahlenschutztagung über Radiologische Auswirkungen von Kernkraftwerken und anderen Kerntechnischen Anlagen auf den Menschen und seine Umwelt, Jahrestagung der Société Française de Radioprotection, Jahrestagung des Fachverbandes für Strahlenschutz CY - Lausanne, Switzerland DA - 30.09.1981 PY - 1982 SP - 45 EP - 52 CY - Würenlingen AN - OPUS4-36435 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - He, Shulin A1 - Johnston, P. R. A1 - Kuropka, B. A1 - Lokatis, S. A1 - Weise, C. A1 - Plarre, Rüdiger A1 - Kunte, Hans-Jörg A1 - McMahon, Dino Peter T1 - Termite soldiers contribute to social immunity by synthesizing potent oral secretions N2 - The importance of soldiers to termite Society defence has long been recognized, but the contribution of soldiers to other societal functions, such as colony immunity, is less well understood. We explore this issue by examining the role of soldiers in protecting nestmates against pathogen infection. Even though they are unable to engage in grooming behaviour, we find that the presence of soldiers of the Darwin termite, Mastotermes darwiniensis, significantly improves the survival of nestmates following entomopathogenic infection. We also show that the copious exocrine oral secretions produced by Darwin termite soldiers contain a high concentration of Proteins involved in digestion, chemical biosynthesis, and immunity. The oral secretions produced by soldiers are sufficient to protect nestmates against infection, and they have potent inhibitory activity against a broad spectrum of microbes. Our findings support the view that soldiers may play an important role in colony immunity, and broaden our understanding of the possible function of soldiers during the origin of soldier-first societies. KW - External KW - Social KW - Immunity KW - Soldier KW - Antimicrobial KW - Proteome PY - 2018 DO - https://doi.org/10.1111/imb.12499 SN - 1365-2583 SN - 0962-1075 VL - 27 IS - 5 SP - 564 EP - 576 PB - Wiley-Blackwell CY - Oxford AN - OPUS4-45726 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Ünal, Murat ED - Raupach, M. T1 - Modulare Ersatzmassen zur Reprofilierung denkmalgeschützter Natursteinbauwerke N2 - Weltweit besteht einen hoher, stetig wachsender Bedarf an Natursteininstandsetzung im Bereich des denkmalgeschützten Kulturguts. Das Ausbessem beschädigter Elemente mit sogenannten Steinersatzmassen ist dabei eine etablierte Technik. Hierfür werden Mörtel unterschiedlichster Zusammensetzung verwendet. Die Schwierigkeit für den Restaurator liegt in der Wahl, bzw. der Verfügbarkeit des optimalen Produkts, um im individuellen Fall sowohl den mechanischen und bauphysikalischen Anforderungen als auch den gestalterischen und denkmalpflegerischen Belangen gerecht zu werden. Anhand der im Beitrag an Fallbeispielen erläuterten häufig auftretenden Probleme und der daraus abgeleiteten Anforderungen an Natursteininstandsetzung, lässt sich die Komplexität dieser Aufgabe erkennen. An der BAM wird derzeit im Rahmen eines Forschungsprojekts ein modulares Steinersatzsystem entwickelt. Ziel der Entwicklung ist es dem Restaurator die größtmögliche Freiheit in der Anpassung des Mörtels an die Originalsubstanz zu geben. Erste Ergebnisse aus Parameterstudien zur Bindemittel- und Sandvariation sowie zu Polymermodifikationen werden vorgestellt. T2 - 3. Kolloquium Erhaltung von Bauwerken CY - Ostfildern, Germany DA - 22.01.2013 PY - 2013 SN - 978-3-943563-03-0 SP - 333 EP - 349 CY - Ostfildern AN - OPUS4-28000 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Trappe, Volker A1 - Ortwein, Hans-Peter A1 - Hickmann, Stefan T1 - Infinite life of CFRP evaluated nondestructively with X-ray-refraction topography N2 - CFRP are more and more used in modern civil aircrafts hence the whole fuselage is made of this material (B787; A350). Due to strict certification Standards finally the normal in-service loading gives a low stress level compared to the static and even the fatigue strength of the material. Hence CFRP are assumed to have an infinite life. To evaluate this assumption, fatigue tests on CFRP-specimens were performed up to 108 load cycles. The first inter-fiber failure was evaluated non-destructively by the fatigue tests accompanying X-ray-refraction topography altemately and in-situ mechanical loading. The basic idea of the investigation is represented in fig. 1. At low load levels it could not be assumed the total failure of the samples. Hence accompanying non-destructive testing (NDT) is mandatory to get information about the damage state of the material. T2 - ICCM19 - 19th International conference on composite materials CY - Montreal, Canada DA - 28.07.2013 KW - Carbon fibre reinforced plastics (CFRP) KW - Very high cycle fatigue (VHCF) KW - Non-destructive testing (NDT) KW - X-ray refraction KW - Damage mechanics PY - 2013 SP - 1 EP - 8 AN - OPUS4-31169 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Segebade, C. A1 - Lutz, G. J. A1 - Weise, Hans-Peter A1 - Fusban, H.-U. T1 - Quantitative Evaluation of Interference Reactions in Photon Activation Analysis PY - 1981 SN - 0134-0719 SN - 0022-4081 VL - 67 IS - 1 SP - 205 EP - 214 PB - Elsevier Sequoia CY - Lausanne AN - OPUS4-33361 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weise, Hans-Peter T1 - Strahlenschutz an Beschleunigeranlagen, Strahlenfelder, Abschirmung und Aktivierung N2 - Der folgende Beitrag befaßt sich mit den beim Betrieb von Elektronen- und lonenbeschleunigern auftretenden Strahlenfeldern und deren Abschirmung sowie mit der in Beschleunigerkomponenten und Abschirmungen induzierten Radioaktivität. Der Schwerpunkt liegt auf Beschleunigern mit kleinen und mittleren Energien (typischerweise unter 100 MeV). Beschleuniger für Hochenergiephysik werden nicht behandelt. PY - 1983 VL - 13 IS - 3 SP - 373 EP - 383 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-40816 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Reinholz, Uwe A1 - Bremser, Wolfram A1 - Brzezinka, Klaus-Werner A1 - Strub, Erik A1 - Weise, Hans-Peter A1 - Merchel, Silke T1 - A thin-layer reference material for hydrogen analysis N2 - In many areas of material sciences, hydrogen analysis is of particular importance. For example, hydrogen is most abundant as impurity in thin film materials – depending on the deposition process – and has great influence on the chemical, physical and electrical properties of many materials. Existing bulk reference materials (RMs) are not suited for surface sensitive analytical methods like elastic recoil detection analysis (ERDA) or nuclear reaction analysis (NRA). To overcome this serious lack of (certified) thin-layer reference materials for the determination of hydrogen in the near-surface region (1–2 µm depth), we produced stable, homogeneous amorphous silicon layers on Si-wafers (aSi:H–Si) by means of chemical vapour deposition (CVD), while about 10% of hydrogen was incorporated in the Si-layer. Homogeneity and stability were proved by NRA whereas traceability of reference values has been assured by an international interlaboratory comparison. KW - Hydrogen KW - Nuclear reaction analysis KW - Depth profiling KW - Reference material KW - Ion beam analysis PY - 2008 DO - https://doi.org/10.1016/j.nimb.2008.03.015 SN - 0168-583X SN - 1872-9584 VL - 266 IS - 10 SP - 2418 EP - 2423 PB - Elsevier CY - Amsterdam AN - OPUS4-17553 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Behrendt, R. A1 - Bohse, Jürgen A1 - Ortwein, Hans-Peter A1 - Wachsmuth, Janne T1 - Möglichkeiten des Einsatzes von Laser-Doppler-Interferometern im Bereich der Schallemissionsanalyse T2 - 17. Kolloquium Schallemission - Statusberichte zur Entwicklung und Anwendung der Schallemissionsanalyse CY - Bad Schandau, Deutschland DA - 2009-09-24 KW - Laser-Doppler-Interferometer KW - Oberflächenwellen KW - Schallemissionssensoren KW - Kalibrierung PY - 2009 SN - 978-3-940283-19-1 IS - DGZfP-BB 118 (Vortrag 16) SP - 1 EP - 9 AN - OPUS4-20085 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit ED - Raupach, M. T1 - Einfluss ausgewählter Modifikationen der Mischungszusammensetzung auf die Eigenschaften von Instandsetzungsmörteln N2 - Trotz der zahlreichen Möglichkeiten zur Beeinflussung der Mörteleigenschaften durch Mischungsmodifikationen ist es nahezu unmöglich, einzelne Eigenschaften unabhängig von anderen zu verändern. Bei einer Mischungsoptimierung muss im Einzelfall immer entschieden werden, welcher der gewünschten Eigenschaften die höchste Priorität zukommt. Anhand von Parameterstudien wird im vorliegenden Artikel verdeutlicht, wie es für bestimmte Anwendungen sinnvoll sein kann, die Verschlechterung einzelner Eigenschaften zu akzeptieren, wenn dadurch eine für den speziellen Einsatzfall essenzielle Eigenschaft verbessert werden kann. Die komplexen Wechselwirkungen der einzelnen Bestandteile fuhren dazu, dass auch scheinbar widersprüchliche Kombinationen von Zusatzmitteln im Einzelfall erforderlich werden können. Zur Anpassung der meisten Mörteleigenschaften gibt es verschiedene Möglichkeiten der Zielerreichung mit jeweils unterschiedlichen Nebeneffekten. Frisch- und Festmörteleigenschaften sind dabei gleichermaßen zu beachten. T2 - 2. Kolloquium "Erhaltung von Bauwerken" CY - Ostfildern/Stuttgart, Germany DA - 25.01.2011 KW - Betoninstandsetzung KW - Instandsetzungsmörtel KW - Modulare Systeme KW - Polymer cement mortar (PCC) KW - Sprayed polymer cement mortar (SPCC) PY - 2011 SN - 3-924813-87-6 SP - 213 EP - 221 AN - OPUS4-23218 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Burkert, Andreas A1 - Lehmann, Jens A1 - Wilbert, Hans-Peter T1 - Edelstahl Rostfrei - Korrosionserscheinungen beim Einsatz im Außenbereich KW - Nichtrostender Stahl KW - Bauwesen KW - Dauerhaftigkeit KW - Korrosion PY - 2010 SN - 0178-6571 VL - 10 SP - 34 EP - 36 PB - Montan- u. Wirtschaftsverlag GmbH CY - Düsseldorf AN - OPUS4-22196 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weise, Hans-Peter T1 - Ergebnisunsicherheit zählstatistischer Messungen- Kernstrahlungsmessungen T2 - BAM-Ak Ergebnisunsicherheit CY - Berlin, Germany DA - 2002-09-03 PY - 2002 AN - OPUS4-3010 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weise, Hans-Peter T1 - Grenzflächenuntersuchung mittels Niklear-Reaktionen T2 - 7. Workshop zu Nanometer-Schutzschichten, Frankfurter Institut für Schicht und Oberflächentechnik (IST) CY - Braunschweig, Germany DA - 2002-06-05 PY - 2002 AN - OPUS4-3011 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Sievert, Rainer A1 - Hamann, Andreas A1 - Noack, Hans-Dieter A1 - Löwe, Peter A1 - Singh, Kai A1 - Künecke, Georgia ED - Tönhoff, K. T1 - Simulation der Spansegmentierung einer Nickelbasislegierung unter Berücksichtigung thermischer Entfestigung und duktiler Schädigung KW - Hochgeschwindigkeitsbeanspruchung KW - Viskoplastisches Deformationsverhalten KW - Thermische Entfestigung KW - Duktile Schädigung PY - 2005 SN - 3-527-31256-0 SP - 446 EP - 469 PB - Wiley-VCH CY - Weinheim AN - OPUS4-7306 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Reiche, I. A1 - Britzke, Ralf A1 - Bukalis, Gregor A1 - Reinholz, Uwe A1 - Weise, Hans-Peter A1 - Gadebusch, R.D. T1 - An external PIXE study: Mughal painting pigments KW - PIXE KW - Mughal painting KW - Pigments KW - Archaeometry PY - 2005 SN - 0049-8246 VL - 34 SP - 42 EP - 45 PB - Wiley CY - Chichester AN - OPUS4-6846 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weise, Hans-Peter T1 - Mewar Rajput Pigments- An External Beam PIXE Study T2 - 10th International Conference in Pixe and its Analytical Applications CY - Ljubljana, Slovenia DA - 2004-06-04 PY - 2004 AN - OPUS4-7183 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Neider, Rudolf A1 - Peter, Hans T1 - Werkzeugaktivierung für die Bestimmung der Schneidbarkeit von Feinblechen PY - 1964 SN - 0004-721X VL - 9 IS - 10 SP - 504 EP - 508 PB - Verl. Handelsblatt CY - Düsseldorf AN - OPUS4-10394 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Peter, Hans T1 - Auslösung und Ausbreitung von Glimmbränden in feinteiligen Schüttgütern - Teil II PY - 1965 SN - 0042-1804 VL - 14 IS - 3 SP - 90 EP - 92 PB - Kohlhammer CY - Stuttgart AN - OPUS4-10456 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weise, Hans-Peter T1 - Die Farbabstände im Farbsystem der DIN-Farbenkarte PY - 1959 SN - 0014-7680 VL - 8 IS - 1 SP - 19 EP - 28 PB - Musterschmidt CY - Göttingen AN - OPUS4-10070 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schrimmer, Peter A1 - Lösche, Hans T1 - Treibriemen, Riementriebe und Treibriemenprüfung PY - 1964 SN - 0023-2092 VL - 72 IS - 1 SP - 4 EP - 12 PB - Klepzig CY - Düsseldorf AN - OPUS4-10311 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Richter, Manfred A1 - Weise, Hans-Peter T1 - Demonstration der Grundlagen der Farbvalenzmetrik PY - 1963 SN - 0014-7680 VL - 12 IS - 1-6 SP - 219 EP - 236 PB - Musterschmidt CY - Göttingen AN - OPUS4-10296 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Peter, Hans T1 - Untersuchungen über Drucksteigerungen bei schnellen Verbrennungen im geschlossenen Raum PY - 1966 SN - 0042-1804 VL - 15 IS - 2 SP - 42 EP - 46 PB - Kohlhammer CY - Stuttgart AN - OPUS4-10527 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weise, Hans-Peter T1 - Vergleich dreier skandinavischer Farbsysteme mit dem der DIN-Farbenkarte T2 - Internationale Farbtagung CY - Luzern, Schweiz DA - 1965-06-01 PY - 1966 SN - 0014-7680 VL - 15 IS - Tagungsbericht Intern. Farbtagung Luzern 1965 SP - 277 EP - 286 PB - Musterschmidt CY - Göttingen AN - OPUS4-10555 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schrimmer, Peter A1 - Lösche, Hans T1 - Zerrüttungswiderstand von Flachriemen in Abhängigkeit von der Wölbhöhe der Riemenscheibenlauffläche PY - 1969 SN - 0372-543X VL - 111 IS - 2 SP - 125 EP - 133 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-10726 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Sievert, Rainer A1 - Noack, Hans-Dieter A1 - Hamann, Andreas A1 - Löwe, Peter A1 - Singh, Kai A1 - Künecke, Georgia A1 - Clos, R. A1 - Schreppel, U. A1 - Veit, P. A1 - Uhlmann, E. A1 - Zettier, R. T1 - Simulation der Spansegmentierung beim Hochgeschwindigkeits-Zerspanen unter Berücksichtigung duktiler Schädigung PY - 2003 UR - http://www.uni-magdeburg.de/ifme/techmech.html SN - 0232-3869 VL - 23 IS - 2-4 SP - 216 EP - 233 PB - Institut für Mechanik CY - Magdeburg AN - OPUS4-2859 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weise, Hans-Peter T1 - Wasserstoffbestimmung an oberflächennahen Schichten und Kernreaktionsanalyse T2 - 3. Diskussionstreffen zu Aktuellen Problemen und Entwicklungen der Nichtmetall-/Gasanalytik CY - Rathen, Germany DA - 2003-10-19 PY - 2003 AN - OPUS4-3849 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weise, Hans-Peter T1 - Allgemeine Strahlenschutzprobleme bei Errichtung und Betrieb von medizinischen Elektroenbeschleunigern T2 - Akademie für Arbeitsmedizin und Gesundheitsschutz Berlin CY - Berlin, Germany DA - 2003-03-28 PY - 2003 AN - OPUS4-3850 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Segebade, Christian A1 - Lutz, G. A1 - Weise, Hans-Peter T1 - Quantitative Evaluation of Interference Reactions in Photon Activation Analysis T2 - 5th International Conference : Modern trends in activation analysis CY - München, Germany DA - 1976-09-13 PY - 1976 VL - 2 SP - 1239 EP - 1244 CY - College Station, Tex. AN - OPUS4-8560 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weise, Hans-Peter A1 - Segebade, Christian T1 - Application of X-ray spectroscopy in nondestructive photon activation analysis T2 - 5th International Conference : Modern trends in activation analysis CY - München, Germany DA - 1976-09-13 PY - 1976 VL - 1 SP - 146 EP - 153 CY - College Station, Tex. AN - OPUS4-8564 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hundt, Jürgen A1 - Kantelberg, Hans A1 - Schimmelwitz, Peter T1 - Zur Wärme- und Feuchtigkeitsleitung in Beton PY - 1977 SN - 3-433-00800-0 SN - 0171-7197 N1 - Serientitel: Deutscher Ausschuß für Stahlbeton – Series title: Deutscher Ausschuß für Stahlbeton IS - 280 SP - 21 EP - 41 PB - Ernst CY - Berlin AN - OPUS4-8630 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Segebade, Christian A1 - Lutz, G. A1 - Weise, Hans-Peter T1 - Quantitative Evaluation of Interference Reactions in Photon Activation Analysis - The Production of Identical Radionuclides PY - 1977 SN - 0134-0719 SN - 0022-4081 VL - 39 IS - 1-2 SP - 179 EP - 184 PB - Elsevier Sequoia CY - Lausanne AN - OPUS4-8788 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weise, Hans-Peter A1 - Segebade, Christian T1 - Application of X-ray spectroscopy in nondestructive photon activation analysis PY - 1977 SN - 0134-0719 SN - 0022-4081 VL - 37 IS - 1 SP - 195 EP - 202 PB - Elsevier Sequoia CY - Lausanne AN - OPUS4-8789 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Segebade, Christian A1 - Weise, Hans-Peter T1 - Comparison of Sensitivity Estimates for Low Energy Photon and Classical Gamma-Ray Spectroscopy Applied to Photon Activation Analysis PY - 1978 SN - 0134-0719 SN - 0022-4081 VL - 45 SP - 209 EP - 220 PB - Elsevier Sequoia CY - Lausanne AN - OPUS4-9006 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Stockhausen, K. A1 - Bögl, W. A1 - Weise, Hans-Peter T1 - Nachweis der Strahlenbehandlung bei bestrahltem Geflügelfleisch anhand des strahleninduzierten Verlustes von Proteinsulfhydrylgruppen PY - 1978 SN - 1438-2377 SN - 1431-4630 SN - 1438-2385 VL - 167 SP - 256 EP - 261 PB - Springer CY - Berlin AN - OPUS4-9007 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Stockhausen, K. A1 - Bögl, W. A1 - Weise, Hans-Peter T1 - A new biochemical technique for detection of radiation treatment of meat PY - 1978 SN - 0004-7147 VL - 31 SP - 184 EP - 188 PB - Thiemig CY - München AN - OPUS4-9008 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Stockhausen, K. A1 - Bögl, W. A1 - Jahn, Marcus A1 - Weise, Hans-Peter T1 - Gamma-Bestrahlung von Stärke in wäßriger Lösung und in Gegenwart von Sauerstoff - Untersuchung über die Bildung von organischen Peroxyverbindungen PY - 1978 SN - 0038-9056 SN - 1521-379X VL - 30 IS - 1 SP - 1 EP - 4 PB - Verl. Chemie CY - Weinheim, Bergstr. AN - OPUS4-9009 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weise, Hans-Peter T1 - A simple filter method for measuring peak voltage and inherent filtration of pulsating potential X-ray machines PY - 1978 SN - 0017-9078 SN - 1538-5159 VL - 34 SP - 483 EP - 486 PB - Lippincott, Williams & Wilkins CY - Hagerston, Md. AN - OPUS4-9011 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heidt, Heinrich A1 - Weise, Hans-Peter A1 - Schnitger, Dierk T1 - Determination of instrument properties of X-ray installations as a contribution to the radiography objectification T2 - 9th World Conference on Nondestructive Testing CY - Melbourne, Australia DA - 1979-11-19 PY - 1979 IS - 4C.1 SP - 1 EP - 7(?) CY - Cannes AN - OPUS4-9184 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Stockhausen, K. A1 - Bögl, W. A1 - Weise, Hans-Peter ED - Reich, H. T1 - Die strahleninduzierte Chemilumineszenz von festen Polyalkoholen als gewebeäquivalentes Dosimetersystem für energiereiche Strahlung T2 - 10. Wissenschaftliche Tagung der Deutschen Gesellschaft für Medizinische Physik CY - Braunschweig, Deutschland DA - 1979-05-16 PY - 1979 SN - 3-7785-0612-9 SP - 199 EP - 204 PB - Hüthig CY - Heidelberg AN - OPUS4-9202 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weise, Hans-Peter A1 - Segebade, Christian T1 - Use of Low Energy Photon Spectroscopy in Activation Analysis of Noble Metals with High-Energy Bremsstrahlung PY - 1979 SN - 0134-0719 SN - 0022-4081 VL - 49 IS - 1 SP - 95 EP - 102 PB - Elsevier Sequoia CY - Lausanne AN - OPUS4-9205 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Heidt, Heinrich A1 - Weise, Hans-Peter A1 - Schnitger, Dierk T1 - Bestimmung von Geräteeigenschaften technischer Röntgenanlagen als Beitrag zur Objektivierung der Durchstrahlungsprüfung PY - 1980 SN - 0025-5300 VL - 22 IS - 5 SP - 211 EP - 213 PB - Carl Hanser Verlag CY - München AN - OPUS4-9415 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Heinrich, Hans-Jürgen A1 - Conrad, Dietrich A1 - Wegener, Wolfgang A1 - Leuschke, Günter A1 - Wandrey, Peter-Andreas ED - Kelker, H. ED - Bartholomé, E. ED - Ullmann, F. T1 - Sicherheitstechnische Kennwerte brennbarer Gase, Dämpfe und Stäube PY - 1980 SN - 3-527-20005-3 N1 - Serientitel: Ullmanns Encyklopädie der technischen Chemie – Series title: Ullmanns Encyklopädie der technischen Chemie IS - 5 SP - 971 EP - 982 PB - Verl. Chemie CY - Weinheim AN - OPUS4-9328 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heumos, K. A1 - Kowalewsky, Helmut A1 - Weise, Hans-Peter T1 - Investigation of Gas Leakage from Sealing Constructions at Containments for Radioactive Materials T2 - 6th International Symposium on Packaging and Transportation of Radioactive Materials CY - Berlin, Germany DA - 1980-11-10 PY - 1980 VL - 6 IS - 4 SP - 210 EP - 213 CY - Springfield, Va. AN - OPUS4-9429 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Segebade, Christian A1 - Fusban, H.-U. A1 - Weise, Hans-Peter T1 - Analysis of some toxic components of environmental samples by high energy photon activation PY - 1980 SN - 0134-0719 SN - 0022-4081 VL - 59 IS - 2 SP - 399 EP - 405 PB - Elsevier Sequoia CY - Lausanne AN - OPUS4-9437 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weise, Hans-Peter T1 - Spektroskopische Meßverfahren zur Beurteilung der Geräteeigenschaften technischer Röntgenanlagen PY - 1980 SN - 0025-5300 VL - 22 IS - 7 SP - 300 EP - 303 PB - Carl Hanser Verlag CY - München AN - OPUS4-9439 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schrimmer, Peter A1 - Lösche, Hans A1 - Gogolin, Bernd ED - Becker, Gerhard Wilhelm T1 - Untersuchungen an Hüllgetrieben PY - 1973 SP - 45 EP - 48 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9574 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weise, Hans-Peter T1 - Die DIN-Farbenkarte und ihre Verwendungsmöglichkeit für das graphische Gewerbe PY - 1954 SN - 0015-7708 VL - 5 IS - 1 SP - 455 EP - 457 PB - Hauptvorstand IG Medien CY - Stuttgart AN - OPUS4-9746 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Weise, Hans-Peter ED - Becker, Gerhard Wilhelm T1 - Farbsysteme und Farbtoleranzen PY - 1973 SP - 437 EP - 440 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9672 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weise, Hans-Peter T1 - Ein Nomogramm mit geradlinien Trägern für projektive Transformationen und seine Anwendung in der Farbmetrik PY - 1954 SN - 0014-7680 VL - 3 IS - 3 SP - 105 EP - 118 PB - Musterschmidt CY - Göttingen AN - OPUS4-9745 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weise, Hans-Peter T1 - Die Ermittlung der Farbkennzeichnung nach der DIN-Farbkarte (DIN 6164) aus den Normfarbwerten und umgekehrt PY - 1955 SN - 0014-7680 VL - 4 IS - 2 SP - 89 EP - 94 PB - Musterschmidt CY - Göttingen AN - OPUS4-9827 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Reiche, I. A1 - Castaing, J. A1 - Calligaro, T. A1 - Salomon, J. A1 - Aucouturier, M. A1 - Reinholz, Uwe A1 - Weise, Hans-Peter T1 - Analyses of hydrogen in quartz and in sapphire using depth profiling by ERDA at atmospheric pressure: Comparison with resonant NRA and SIMS N2 - Hydrogen is present in anhydrous materials as a result of their synthesis and of their environment during conservation. IBA provides techniques to measure H concentration depth profiles allowing to identify various aspects of the materials including the history of objects such as gemstones used in cultural heritage. A newly established ERDA set-up, using an external microbeam of alpha particles, has been developed to study hydrated near-surface layers in quartz and sapphire by non-destructive H depth profiling in different atmospheres. The samples were also analysed using resonant NRA and SIMS. KW - Hydrogen KW - Gemstones KW - ERDA KW - External beam KW - Depth profiling PY - 2006 DO - https://doi.org/10.1016/j.nimb.2006.03.066 SN - 0168-583X SN - 1872-9584 VL - 249 IS - 1-2 SP - 608 EP - 611 PB - Elsevier CY - Amsterdam AN - OPUS4-12844 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weise, Hans-Peter ED - Richter, M. T1 - Vergleich dreier skandinavischer Farbsysteme mit dem der DIN-Farbenkarte PY - 1966 VL - 1 SP - 389 EP - 398 PB - Musterschmidt CY - Göttingen AN - OPUS4-15486 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kühn, Hans-Joachim A1 - Kahlcke, Ole A1 - Brookes, Stephen-Peter T1 - A practicable nominal temperature tolerance for TMF-tests N2 - The aim of this research was to investigate the influence of nominal temperature errors on test results and to develop the nominal temperature tolerance for TMF-tests. This concept was confirmed with series of specially developed TMF-tests with defined temperature errors, performed on one test material (NIMONIC 90) in a temperature range of 400–850 °C. These tests should show the influence of temperature errors on test results with an emphasis on lifetime in comparison with reference tests. It is shown that with a limited number of specimens and only one test material, it is possible to propose a reasonable general temperature tolerance for TMF-tests, valid for a wide range of materials and test conditions. KW - Thermo-mechanical fatigue KW - Temperature tolerance KW - Temperature error KW - Life time PY - 2008 DO - https://doi.org/10.1016/j.ijfatigue.2007.01.057 SN - 0142-1123 VL - 30 IS - 2 SP - 277 EP - 285 PB - Elsevier CY - Oxford AN - OPUS4-16133 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit T1 - Properties of repair mortars - potentials and risks of a tailor-made mixture proportioning N2 - Despite the numerous possibilities to influence the properties of repair mortars by modifications of the mixture proportioning, it is almost impossible to change an individual property without influencing other mortar properties. When optimising a mixture, it has to be decided for each individual case, which of the mortar properties needs to be treated with the highest priority. Most properties can be altered by several different measures, which may vary in effectiveness, side effects and cost efficiency. As the prevention of shrinkage induced constraining cracks is crucial for the durability and Service life of a concrete repair task, in the presented paper special attention is paid to the influences on the mortar’s shrinkage behaviour. On the basis of parameter studies it is shown, how it may be beneficial in certain cases to accept the worsening of some general properties if by this measure another property, which is essential for the individual application task, can be enhanced significantly. In general a tailor-made approach for the mixture proportioning seems beneficial but due to the complexity of the constituents’ interactions in repair mortars, it bears a high risk of unexpected malfunctions. T2 - Concrete-Workshop 'Performance-based specifications for concrete' CY - Leipzig, Germany DA - 14.06.2011 KW - Repair mortar KW - Concrete rehabilitation KW - Repair systems KW - Polymer cement mortar (PCC) KW - Sprayed polymer cement mortar (SPCC) PY - 2011 SN - 978-3-9814523-0-3 SP - 319 EP - 329 AN - OPUS4-23985 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ortwein, Hans-Peter T1 - Untersuchung der Mikrorissbildung in Faserkunststoffverbunden mittels Röntgenrefraktions- und Schallemissionsmessung T2 - 18. Kolloquium Schallemission der DGZfP CY - Wetzlar, Germany DA - 2011-10-27 PY - 2011 AN - OPUS4-24682 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit ED - Drochytka, R. ED - Bohus, S. T1 - Natural stone reprofiling in cultural heritage with modular repair mortars N2 - Whenever the preservation of original substance obtains priority in a restoration task, reprofiling techniques using repair mortars are a welcome solution. For ordinary concrete repair aesthetic aspects are of minor importance whereas for the restoration of natural stone elements they come to the fore. Especially for listed buildings and monuments, historico-cultural and aesthetical interests become the ruling Parameters for planning and execution of restoration tasks. Nevertheless the technical and constructive requirements have to be considered and deterioration processes have to be understood to ensure sustainability and durability of the repair task. Due o differences in the Chemical and mineralogical composition, natural stone provides a vast variety of texture and colour. Also the range of different mechanical and durability related properties is far wider than found with concrete for example. A research project dealing with the development of a modular repair mortar System for natural stone is currently set up at the BAM. To provide the conservator with the best possible options to match colour, texture and technical requirements, the System will be setup on a modular basis. Several different binder Systems on basis of cement, lime and sodium Silicate as well as polymer based Systems are planned, which can be combined with different aggregate compositions and different pigments. To evaluate the mortar performance, test procedures will be defined for tests on mortar samples and on composite specimens. In the paper the experimental Programme will be explained and first results will be presented and discussed. T2 - 2nd WTA - Internaitonal PhD Symposium - Building materials and buidling technology to preserve the built heritage CY - Brno, Czech Republic DA - 06.10.2011 PY - 2011 SN - 978-3-937066-21-9 SN - 0947-6830 N1 - Serientitel: WTA-Schriftenreihe – Series title: WTA-Schriftenreihe IS - 36 SP - 208 EP - 216 PB - WTA Publications AN - OPUS4-24837 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ortwein, Hans-Peter A1 - Trappe, Volker A1 - Bohse, Jürgen A1 - Hickmann, Stefan ED - Grellmann, W. T1 - In-Situ-Messung der Matrixschädigung in kohlenstofffaserverstärktem Kunststoff unter uni- und biaxialer Zugbelastung N2 - Die Restlebensdauerabschätzung von Faserkunststoffverbunden ist ein ungelöstes Problem. Die Beobachtung der Matrixschädigung ist dabei ein vielversprechender Ansatz zur Bewertung des Schädigungszustandes insgesamt. Unter kombinierter Beobachtung mit Röntgenrefraktionsmessungen und Schallemissionsmessung wurden uni- und biaxiale Lasten statisch und zyklisch auf Kohlenstofffaserepoxidharz-Proben aufgebracht. Die uniaxiale Belastung erfolgt mittels einer eigenentwickelten Kompaktprüfmaschine direkt während der Röntgenrefraktions- und Schallemissionsmessung in der Röntgenkammer. Die biaxiale Belastung wird an Modelldruckbehältern ebenfalls mit Schallemissionsmessung durchgeführt. Hier wird der Modelldruckbehälter mit dem Röntgenrefraktionsverfahren periodisch inspiziert. T2 - DVM-Tagung Werkstoffprüfung 2011 - Neue Entwicklungen in der Werkstoffprüfung - Herausforderungen an die Kennwertermittlung CY - Berlin, Germany DA - 01.12.2011 KW - Druckbehälterprüfung KW - CFK KW - Schallemissionsmessung KW - Röntgenrefraktionsmessung KW - Matrixschädigung KW - Faserkunststoffverbund KW - Druckbehälter PY - 2011 SN - 978-3-9814516-1-0 SN - 1861-8154 N1 - Serientitel: DVM-Bericht – Series title: DVM-Bericht IS - 643 SP - 161 EP - 166 AN - OPUS4-24931 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ortwein, Hans-Peter T1 - In-Situ-Messung der Matrixschädigung in kohlenstofffaserverstärktem Kunststoff unter uni- und biaxialer Zugbelastung - In-situ-monitoring of matrix degradation in carbonfiber reinforced plastic under uni- and biaxial tension T2 - DVM-Tagung Werkstoffprüfung 2011 CY - Berlin, Germany DA - 2011-12-01 PY - 2011 AN - OPUS4-25071 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Burkert, Andreas A1 - Lehmann, Jens A1 - Gümpel, P. A1 - Wilbert, Hans-Peter T1 - Edelstahl Rostfrei - Alternativen zu den Standardausteniten N2 - Die Rohstoffpreise sind seit einigen Jahren starken Schwankungen unterworfen und weisen insgesamt eine steigende Tendenz auf. Dies kommt gerade bei den weit ver-breiteten Standardausteniten durch äußerst volatile Legierungszuschläge zum Ausdruck, für die in erster Linie das Legierungselement Nickel (Ni) entscheidend ist. Die-ser Umstand führt bei immer mehr Verarbeitern von Edelstahl Rostfrei in Deutschland zur Suche nach alternativen Edelstahlgüten, um die Wettbewerbsfähigkeit auch zukünftig sicherzustellen. KW - Nichtrostender Stahl KW - Austenit KW - Ferrit KW - Lean Duplex KW - Korrosionsverhalten PY - 2012 SN - 0178-6571 VL - 06 SP - 52 EP - 55 PB - Montan- u. Wirtschaftsverlag GmbH CY - Düsseldorf AN - OPUS4-26030 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ortwein, Hans-Peter T1 - Mikrorissbildung in Faserkunststoffverbunden als Indikator für die Betriebsfestigkeitsvorhersage T2 - Frühjahrssitzung 2011 der DGM/DVM-AG Materialermüdung CY - Kassel, Germany DA - 2011-04-07 PY - 2011 AN - OPUS4-25097 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ortwein, Hans-Peter T1 - Untersuchung des Zwischenfaserrisswachstums in Faserverbundwerkstoffen mit Schallemissions- und Röntgenrefraktionsverfahren T2 - DGZfP-Jahrestagung CY - Bremen, Germany DA - 2011-05-30 PY - 2011 AN - OPUS4-25112 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ortwein, Hans-Peter T1 - Investigation of infinite life in fiber-reinforced-plastics by non-destructive monitoring of micro structural damage processes with x-ray-refraction T2 - MSE 2012 CY - Darmstadt, Germany DA - 2012-09-25 PY - 2012 AN - OPUS4-26609 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ramge, Peter A1 - Proske, T. A1 - Kühne, Hans-Carsten ED - Khayat, K.H. ED - Feys, D. T1 - Segregation of coarse aggregates in self-compacting concrete N2 - A major requirement on self-compacting concrete (SCC) is the resistance to any kind of separation. In the presented studies the segregation behavior of aggregates was analyzed systematically. The rheology of selfcompacting mortars was dealt with at first. Following, the segregation of particles of different size, shape and density in various mortars was examined. The aim was to find an analytical relation to estimate the risk of sedimentation, using the characteristics of the particles and those of the mortars. The classification of the aggregates according to their potential segregation is rather simple. But the description of the segregation resistance of the mortar is much more difficult. It is not possible to evaluate a mortar solely based on the rheological properties. The mixture composition must always be considered as well. Tests on concrete samples were conducted additionally to determine the influence of the overall system of SCC on the sedimentation of the aggregates. T2 - SCC2010 - Design, production and placement of self-consolidating concrete CY - Montreal, Canada DA - 2010-09-26 KW - Rheology KW - Segregation KW - Static yield stress KW - Mixture proportioning KW - Aggregates KW - Rheologie KW - Sedimentation KW - Statische Fließgrenze KW - Mischungszusammensetzung KW - Gesteinskörnung PY - 2010 SN - 978-90-481-9663-0 DO - https://doi.org/10.1007/978-90-481-9664-7_10 N1 - Serientitel: RILEM bookseries – Series title: RILEM bookseries VL - 1 IS - 3 SP - 113 EP - 125 PB - Springer AN - OPUS4-22298 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit ED - Littmann, K. T1 - Parameterstudien zum Einfluss von Rezepturveränderungen auf Schwindverhalten, Rissneigung und Steifigkeit mineralischer Instandsetzungsmörtel T2 - 7. Internationales Kolloquium Industrieböden 2010 CY - Ostfildern, Deutschland DA - 2010-12-14 KW - Betoninstandsetzung KW - Instandsetzungsmörtel KW - Modulare Systeme KW - Haftverbund KW - SPCC KW - PCC PY - 2010 SN - 3-924813-85-X IS - Kap. 2.6 SP - 191 EP - 200 AN - OPUS4-22845 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit T1 - Development of a modular system for the protection and repair of concrete structures KW - Repair mortar KW - Repair systems KW - Polymer cement concrete (PCC) KW - Sprayed polymer cement concrete (SPCC) PY - 2010 SN - 1864-7251 SN - 0947-4498 VL - 16 IS - 4/5 SP - 387 EP - 400 PB - Aedificatio Publ. CY - Freiburg AN - OPUS4-22773 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit T1 - Einfluss ausgewählter Modifikationen der Mischungszusammensetzung auf die Eigenschaften von Instandsetzungsmörteln N2 - Trotz der zahlreichen Möglichkeiten zur Beeinflussung der Mörteleigenschaften durch Mischungsmodifikationen ist es nahezu unmöglich, einzelne Eigenschaften unabhängig von anderen zu verändern. Bei einer Mischungsoptimierung muss im Einzelfall immer entschieden werden, welcher der gewünschten Eigenschaften die höchste Priorität zukommt. Anhand von Parameterstudien wird im vorliegenden Artikel verdeutlicht, wie es für bestimmte Anwendungen sinnvoll sein kann, die Verschlechterung einzelner Eigenschaften zu akzeptieren, wenn dadurch eine für den speziellen Einsatzfall essenzielle Eigenschaft verbessert werden kann. Die komplexen Wechselwirkungen der einzelnen Bestandteile fuhren dazu, dass auch scheinbar widersprüchliche Kombinationen von Zusatzmitteln im Einzelfall erforderlich werden können. Zur Anpassung der meisten Mörteleigenschaften gibt es verschiedene Möglichkeiten der Zielerreichung mit jeweils unterschiedlichen Nebeneffekten. Frisch- und Festmörteleigenschaften sind dabei gleichermaßen zu beachten. KW - Instandsetzungsmörtel KW - Betoninstandsetzung KW - Instandsetzungssysteme KW - Polymer-Zement Beton (PCC) KW - Polymer-Zement Spritzbeton (SPCC) KW - Repair mortar KW - Concrete rehabilitation KW - Repair systems KW - Polymer cement concrete (PCC) KW - Sprayed polymer cement concrete (SPCC) PY - 2011 SN - 1864-7251 SN - 0947-4498 VL - 17 IS - 3/4 SP - 169 EP - 180 PB - Aedificatio Publ. CY - Freiburg AN - OPUS4-24479 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit T1 - Repair mortars for the restoration and reprofiling of natural stone elements in cultural heritage N2 - For the protection of the world's cultural heritage the restoration of listed buildings and monuments is an important task. In many cases the need to repair and reprofile natural stone elements occurs. Repair mortars for such applications have to match historicocultural interests as well as durability related and constructive interests. Currently a research project dealing with the development and optimisation of such mortars is set up at the BAM. Special focus is laid on the possibility of a modular adaption to match a vast variety of stone properties. Besides the development and lab scale testing of the mortar system, an in-situ application will be planned and executed. T2 - EWCHP-2011 - European workshop on cultural heritage preservation CY - Berlin, Germany DA - 26.09.2011 KW - Repair mortar KW - Natural stone KW - Stone restoration KW - Stone reprofiling KW - Modular system KW - Listed buildings and monuments PY - 2011 SN - 978-3-8167-8560-6 SP - 281 EP - 288 AN - OPUS4-24561 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit ED - Rogge, A. ED - Meng, B. T1 - MODINSYS - Entwicklung und Modifikation von Instandsetzungsmörteln für Beton- und Stahlbetonkonstruktionen T2 - 52. DAfStb-Forschungskolloquium CY - Berlin, Germany DA - 07.11.2011 PY - 2011 SN - 978-3-9814281-0-0 SP - 238 EP - 246 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-25178 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit ED - Rogge, A. ED - Meng, B. T1 - Entwicklung von modularen Instandsetzungsmörteln für den Einsatz an denkmalgeschützten Natursteinbauwerken T2 - 52. DAfStb-Forschungskolloquium CY - Berlin, Germany DA - 07.11.2011 PY - 2011 SN - 978-3-9814281-0-0 SP - 247 EP - 255 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-25177 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit ED - Rogge, A. ED - Meng, B. T1 - Rheologie von Instandsetzungsmörteln - aktuelle Untersuchungen mit dem Würpelgerät T2 - 52. DAfStb-Forschungskolloquium CY - Berlin, Germany DA - 07.11.2011 PY - 2011 SN - 978-3-9814281-0-0 SP - 58 EP - 66 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-25192 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit ED - Aguiar, J. B. ED - Jalali, S. ED - Camoes, A. ED - Ferreira, R.M. T1 - MODINSYS modular systems for the protection and repair of concrete structures T2 - 13th International Congress on polymers in concrete - ICPIC 2010 CY - Funchal-Madeira, Portugal DA - 2010-02-11 KW - Betoninstandsetzung KW - Instandsetzungsmörtel KW - Modulare Systeme KW - SPCC KW - PCC KW - Repair mortar KW - Modular systems KW - Concrete rehabilitation PY - 2010 SN - 978-972-99179-4-3 SP - 697 EP - 704 CY - Funchal-Madeira, Portugal AN - OPUS4-20937 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit ED - Stark, J. T1 - Betoninstandsetzung mit modular zusammengesetzten PCC- und SPCC-Mörteln T2 - 17. Ibausil - Internationale Baustofftagung CY - Weimar, Germany DA - 2009-09-23 KW - Betoninstandsetzung KW - Instandsetzungsmörtel KW - Modulare Systeme KW - SPCC KW - PCC PY - 2009 SN - 978-3-00-027265-3 VL - 2 SP - 2-0151 - 2-0156 CY - Weimar AN - OPUS4-20301 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geißler, Peter A1 - Cuéllar, Pablo A1 - Hüsken, Götz A1 - Kühne, Hans-Carsten A1 - Baeßler, Matthias T1 - Insights into compaction grouting for offshore pile foundations N2 - The authors are currently investigating the possibility to apply compaction grouting for offshore pile foundations (Jacket piles as well as monopiles) as a possible retrofitting technique for an optimised foundation concept. In this research project, we are developing a design approach aiming to predict the ideal amount and properties of a grout for a specific soil situation and desired improvement of pile bearing capacity after Installation and during service time. Both numerical and experimental tests have been carried out to investigate the injection process during which a highly viscous grout is injected into the soil under high pressure to displace and compact the surrounding soil without fracturing it. The implicit Material Point Method (MPM) based on a mixed formulation is the numerical technique chosen to deal with the expected large deformations and the arbitrary shape of the developing grout bulb. The usage of MPM prevents both the need of remeshing and the numerical instability induced by extensive mesh distortion. For validation with experimental results, we have constructed a testing chamber with one transparent sidewall. This chamber enables us to observe the injection process directly at the transparent vertical window and to measure the in-plane soil displacements and strains by means of the Digital Image Correlation (DIC) technique. The results already reveal the interrelation of soil and grout properties for a successful usage of this common ground improvement technique. T2 - 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018) CY - Madrid, Spain DA - 18.06.2018 KW - Offshore pile foundation KW - Compaction grouting KW - Material Point Method (MPM) KW - Mixed formulation KW - Digital Image Correlation (DIC) PY - 2018 SN - 978-0-7918-5130-2 SN - 2153-4772 VL - 9 SP - V009T10A013, 1 EP - 9 AN - OPUS4-46004 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ünal, Murat A1 - Ramge, Peter A1 - Kühne, Hans-Carsten T1 - Restoration of dalles de verre concrete glass windows with polymer modified repair mortars N2 - On concrete glazings done in the so called ‘Dalles de Verre’ technique, damages occur frequently in form of cracks, Chips and corroded reinforcement Steel. These glazings, mostly dating back to the 20* Century, are often of art-historical importance. This article focuses on the analysis of occurring damages and their causes and on the development of special repair mortars and repair concepts for these glazings, which were done in a recent research project. On several reference buildings compressive strength, reinforcement location and diameter, carbonation depth as well as moisture and salt profiles were determined exemplarily. At the time of the concrete glass Windows’ construction generally no sufficient care was taken for an adequate concrete covering of the reinforcement. Carbonation-induced reinforcement corrosion is therefore the main cause of the occurring damage. Standards dealing specifically with the repair of Dalles de Verre do not exist. Therefore the polymer modified repair mortar was development according to the German guideline “Protection and Repair of Concrete Structures” (RL SIB, 2001). However due to the unique boundary conditions ofthe Dalles de Verre glazings, thespecifications of this guideline alone are not sufficient, they need to be altered and amended. In the article the individual requirements on repair mortars for different application tasks are described. Furthermore, the development of the mortars’ formulations and of a test specimen for performance tests under realistic conditions is shown. T2 - ASPIC 2012 - 7th Asian symposium on polymers in concrete CY - Istanbul, Turkey DA - 03.10.2012 KW - Rehabilitation of concrete structures KW - Polymer modified repair mortar KW - Special test specimens KW - Durability KW - Carbonation KW - Cultural heritage PY - 2012 SN - 978-975-561-427-4 SP - 397 EP - 404 AN - OPUS4-26774 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ünal, Murat A1 - Kühne, Hans-Carsten A1 - Ramge, Peter T1 - Untersuchungen zur Schadenssituation an Betonglasfenstern und Entwicklung von Betonersatzsystemen zur Instandsetzung N2 - In den 50er Jahren des 20. Jahrhunderts entwickelten sich auch aufgrund kriegsbedingter Zerstörung von zahlreichen Gebäuden neue, experimentelle Formen in Kunst und Architektur. Insbesondere im Kirchenbau wurde besonderer Wert auf die Färb- und Lichtwirkung im Innenraum gelegt. In dieser künstlerischen Bewegung setzte sich auch aus Kostengründen die Idee der Betonverglasungen durch. Diese bestehen vorwiegend aus in Form gegossenen, geschlagenen oder geschnittenen Dickglasstücken, den sogenannten Dalles de Verre. Die Verbindung der einzelnen Elemente erfolgt nicht wie bei traditionellen Kirchenfenstern durch Bleiruten sondern durch Stahlbetoneinfassungen. Unterschieden werden dabei Betonverglasungen in Betonglasgusstechnik und in Formsteintechnik sowie Mischformen beider Techniken. Bedingt durch die Gestaltung der Betonverglasungen entstanden filigrane Bauteile mit geringen Betonüberdeckungen der Bewehrung. An diesen kunsthistorisch bedeutsamen Betonverglasungen treten daher gehäuft Schäden in Form von Rissen, Abplatzungen und korrodierter Bewehrung auf. Im Rahmen eines Forschungsvorhabens beschäftigte sich die BAM Bundesanstalt für Materialforschung und -prüfung mit der Analyse aktueller Schäden und Schadensursachen sowie der Entwicklung von geeigneten Instandsetzungskonzepten. Unter Beachtung sowohl technischer als auch kunsthistorischer Gesichtspunkte wurden Referenzobjekte zu genaueren Untersuchungen ausgewählt. Nach Rücksprache mit den zuständigen Denkmalschutzbehörden und Kirchengemeinden erfolgte eine Dokumentation der Bauwerks- und Schadenssituation der ausgewählten Referenzobjekte in Deutschland und dem europäischen Ausland. T2 - 18. Ibausil - Internationale Baustofftagung CY - Weimar, Germany DA - 12.09.2012 PY - 2012 SN - 978-3-00-034075-8 VL - 2 IS - 3.07 SP - 904 EP - 911 AN - OPUS4-26668 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weise, Hans-Peter A1 - Görner, Wolf A1 - Hedrich, Martina T1 - Determination of elements by nuclear analytical methods N2 - Zusammenfassung The working principle of nuclear analytical methods (NAMs) is not influenced by the chemical bond. Consequently, they are independent counterparts to the well-known chemical procedures. NAMs obey fundamental laws or can be described and understood thoroughly. This qualifies them as candidates for reference methods. Although following similar nuclear reaction schemes, they comprise bulk analyzing capability (neutron and photon activation analysis) as well as detection power in surface near regions of solids (ion beam techniques). Prominent features of NAMs are sensitivity, selectivity, multielement determination and linearity of the calibration function covering a concentration range of several orders of magnitude. Moreover, ion beam techniques allow depth profiling with nm-resolution in several cases while the ion microprobe additionally offers a lateral resolution in the wm-scale. As NAMs require expensive apparatus (nuclear reactor, accelerator in radioactive control areas) their availability is restricted to a small number of suitably equipped institutes. However, they are able to solve complex analytical tasks, take part in key comparisons and play an essential role in the certification of reference materials. KW - Nuclear Analytical Methods PY - 2001 DO - https://doi.org/10.1007/s002160000626 SN - 0937-0633 VL - 369 IS - 1 SP - 8 EP - 14 PB - Springer CY - Berlin AN - OPUS4-843 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -