TY - CONF A1 - Mayer, U. A1 - Böhme, W. A1 - Borsutzki, M. A1 - Häcker, Ralf A1 - Schneider, K. A1 - Düpmeier, T. A1 - Tobisch, M. A1 - Kudliczka, H. A1 - Neuhaus, R. A1 - Ruifrok, R. A1 - Cotinaut, L. A1 - Höfemann, M. ED - Frenz, H. ED - Grellmann, W. T1 - Ergebnisse eines VDEh-Ringversuchs zum Stahl-Eisen-Prüfblatt "Hochgeschwindigkeitszugversuche an gefügten Stählen" T2 - Tagung Werkstoffprüfung 2008 CY - Berlin, Germany DA - 2008-12-04 KW - Hochgeschwindigkeitszugversuch KW - Fügestellen KW - Kennwerte für Crashsimulation KW - Scherzugversuch KW - Ringversuch KW - High rate tension test KW - Joints KW - Properties for crash simulation KW - Shear tension test KW - Round robin PY - 2008 SN - 978-3-00-026399-6 SN - 1861-8154 SP - 161 EP - 166 AN - OPUS4-33405 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Redmer, Bernhard A1 - Malitte, Hans-Joachim A1 - Sölter, B. A1 - Reinhardt, E. A1 - Hacker, R. T1 - Technische und öffentliche Sicherheit von umschlossenen radioaktiven Quellen in der Werkstoffprüfung unter Beachtung nationaler und internationaler Anforderungen N2 - + Der Schutz der Beschäftigen und der Öffentlichkeit und die sichere Handhabung von umschlossenen Quellen in der technischen Radiographie ist durch die Beachtung aller Regeln (Gesetze, Verordnungen und Standards) gewährleistet. + Nach derzeitigem Kenntnisstand sind die dargestellten Maßnahmen für die Gamma- Radiographie aus Sicht der Anwender ausreichend. + Der Standort einer radioaktiven Quelle wird durch ihre Registrierung in das HRQ- Register und bei der örtlichen Regulierungsbehörde sowie durch Anmeldung einer Vor-Ort-Gamma- Radiographie bei der zuständigen Behörde nachvollziehbar. + Safety: Technische Sicherheit umschlossener radioaktiver Quellen ist gesichert durch technische Maßnahmen. + Security: Öffentliche Sicherheit ist gewährleistet durch Genehmigungsverfahren, technische 24 Technische und öffentliche Sicherheit von umschlossenen radioaktiven Quellen in der Werkstoffprüfung Redmer et.al. – DGZfP Jahrestagung 2010, Erfurt, 10.-12. Mai 2010 Regeln, Ausbildung und Training und einem entsprechenden Qualitätsmanagement. + Aus Sicht der nuklearen Gefahrenabwehr wird z.Z. über neue bzw. umfangreichere Maßnahmen zur Sicherheit von umschlossenen Strahlenquellen nachgedacht. Erste Entwürfe bei der IAEA und EU sind im Umlauf bzw. in Diskussion. Mittelfristig wird eine Änderung der StrlSchV dazu erwartet. T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Deutschland DA - 2010-05-10 KW - Durchstrahlungsverfahren KW - Gamma-Strahler KW - Strahlenschutz KW - Ortsveränderlicher Einsatz PY - 2010 SN - 978-3-940283-26-9 IS - DGZfP-BB 122 (Mi.2.B.1) SP - 1 EP - 13 CY - Berlin AN - OPUS4-22530 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Braun, T. A1 - Uhlmann, E. A1 - Häcker, Ralf A1 - Jäger, M. A1 - Rauch, H. A1 - Kondas, J. A1 - Brach, K. A1 - Singh, R. T1 - Evaluation of electric conductivity and mechanical load capacity of copper deposits for application in large winding components for electrical high-voltage machines made with cold spray additive manufacturing N2 - In line with the industrial trend of additive manufacturing, cold spray as a non-laser-based process is becoming increasingly important for many fields of application. For the evaluation of additive manufacturing of winding components made of copper for large electrical high-voltage machines, material and component properties such as electrical conductivity, mechanical load capacity and the component size that can be produced are of particular importance. In this context, the cold spray process offers advantages over laser-based additive manufacturing processes such as laser powder bed fusion (LPBF) or laser cladding by using the kinetic energy of the copper powder particles to generate particle cohesion. To investigate the electrical conductivity as well as the mechanical load capacity of cold spray parts, specimens were machined out of cold sprayed bulk copper deposits. The characteristic values were obtained with regard to the direction of deposition, which is defined by the direction of the robot’s movement. Thus, for the investigation of the component properties, specimens were provided that had been produced both longitudinally and transversely as well as orthogonally to the direction of deposition. The results of the investigations show that both the electrical conductivity and the mechanical load capacity of the specimen have a strong preferential direction of the specimen orientation with respect to the direction of deposition. Furthermore, it could be shown that by increasing the deposition height, there is an increasing oxygen content in the sample material, combined with increasingly significant defect networks. These effects have a negative impact on the electrical conductivity as well as on the mechanical load capacity. As a conclusion, further need for investigation is identified in the optimization of the process parameters as well as in the deposition strategy for the additive manufacturing of large-volume components with cold spray. T2 - ITSC 2022 CY - Wien, Austria DA - 04.05.2022 KW - Cold Spray KW - Electrical conductivity KW - Copper powder particles KW - Large electrical high-voltage machine PY - 2022 SP - 1 EP - 7 AN - OPUS4-56108 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -