TY - CONF A1 - Gradt, Thomas T1 - Influence of cryogenic hydrogen environment on the tribological properties of materials N2 - The presentation gives an overview over the LH2-activities during 20 years of tribological research in cryogenic environments at BAM. T2 - 2019 Hydrogenius & I2CNER Tribology Symposium CY - Fukuoka, Japan DA - 30.01.2019 KW - Friction KW - Wear KW - Hydrogen KW - Cryogenic Engineering KW - Hydrogen Embrittlement PY - 2019 AN - OPUS4-47339 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Theiler, Geraldine A1 - Harsha, A. P. A1 - Gradt, Thomas T1 - On the sliding wear behavior of PEAK composites in vacuum environment N2 - The tribological behavior of neat and filled PEEK and PEKK composites were compared in air and vacuum conditions. Very low friction and wear coefficient were obtained at low sliding speed while severe wear occurred at high speed. Experimental results are discussed by analysing the transfer film and wear debris. KW - PEAK KW - Composites KW - Wear KW - Friction KW - Vacuum PY - 2019 DO - https://doi.org/10.1115/1.4042271 SN - 0022-2305 SN - 0742-4787 VL - 141 IS - 4 SP - 044502-1 EP - 044502-7 PB - ASME AN - OPUS4-47298 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Spaltmann, Dirk A1 - Kogia, M. A1 - Liedtke, S. A1 - Dykeman, D. A1 - Gradt, Thomas T1 - Challenges for the design of a universal tribological database for materials N2 - Renowned institutions in the field of tribology combine their testing and analytical capabilities with experts in materials/process information management technology to provide the respective Services in Europe (i-TRIBOMAT). This requires a centralized materials information management system or the standardised capture, consolidation and harmonization of tribological information. T2 - 60. Tribologe-Fachtagung CY - Goettingen, Germany DA - 23.09.2019 KW - Database KW - Tribology KW - Digital KW - LIMS PY - 2019 SN - 978-3-9817451-4-6 SP - 37/1 EP - 37/5 PB - GfT (Gesellschaft für Tribologie) CY - Jülich AN - OPUS4-49147 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Shapovalov, Oleg A1 - Gaal, Mate A1 - Hönig, Gerald A1 - Gradt, Thomas A1 - Weiss, S. T1 - Temperature dependence of the propagation speed of a longitudinal wave in different solids for use as a wedge material in an extreme-temperature-resistant ultrasonic transducer N2 - In special cases of angle beam ultrasonic measurement – e.g. defect detection in hot solids as well as flow measurement of liquid gases or energy storage mediums – the applied transducer has to withstand extreme temperatures. Since the irradiation angle into the specific material is determined not only by wedge design, but also by the speed of sound in both the wedge material and the tested object, the developer must take into account the speed of the wave propagation in a wedge material over the whole temperature range of transducers application. In this study we investigate the temperature dependence of the speed of longitudinal wave propagation in 10 different materials in the range from -200 °C to 400 °C. The investigated materials belong to different material classes (ceramics, glass, as well as ferrous and non-ferrous metals) and are all temperature-resistant up to at least 600 °C, and therefore applicable as wedge materials in an ultrasonic transducer for use at extreme temperatures. T2 - 23rd International Congress on Acoustics CY - Aachen, Germany DA - 09.09.2019 KW - Ultrasonic Transducer KW - Speed of sound KW - Longitudinal Wave KW - Temperature PY - 2019 SP - 4776 EP - 4782 AN - OPUS4-48980 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Theiler, Geraldine A1 - Gradt, Thomas T1 - Friction and wear behaviour of graphite filled polymer composites in hydrogen environment N2 - Ensuring a sustainable energy supply is currently one of the most important areas for industry and research institutions. Hydrogen technology is a promising candidate, but its broad extension requires extremely high reliability and safety in all areas for common applications as automobiles and stationary fuel cells. Particularly components containing tribosystems are critical parts. T2 - WTC 2013 - 5th World tribology congress CY - Torino, Italy DA - 08.09.2013 PY - 2013 SP - Paper 868, 1 EP - 2 AN - OPUS4-30942 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Theiler, Geraldine A1 - Gradt, Thomas T1 - PEEK-Komposite für Reibsysteme in der Vakuumtechnik T2 - Fachtagung der Gesellschaft für Tribologie 2007 CY - Göttingen, Germany DA - 2007-09-24 PY - 2007 AN - OPUS4-17482 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Theiler, Geraldine A1 - Gradt, Thomas A1 - Banova, Z. A1 - Schlarb, A.K. T1 - PEEK-Komposite für Reibsysteme in der Vakuumtechnik N2 - Aim of the investigation is to characterize selected PEEK-composites in vacuum environment. Oscillating sliding friction was investigated with a pin-on-disc configuration in high vacuum (10-5 mbar) at room temperature, -40 °C, +100 °C and +160 °C. The contact pressure was 1 MPa and 7 MPa respectively , the maximum sliding velocity 0.1 m/s. Furthermore, tests in ultra high vacuum (10-9 mbar) were carried out with flat and spherical pins at 1 MPa and 60 MPa respectively. Among the tested materials MoS2 filled PEEK shows the best tribological performance in vacuum. Particularly, in the lower temperature range and at higher loads the friction behaviour is improved by MoS2 content. KW - Vakuum KW - Polymer composite KW - Tribology KW - PEEK Komposite KW - Hochvakuum KW - Temperatureinfluss KW - MoS2 KW - Grafit KW - PEEK composites KW - High vacuum KW - Influence of the temperature KW - Graphite PY - 2008 SN - 0724-3472 VL - 55 IS - 5 SP - 25 EP - 30 PB - Expert Verlag CY - Renningen AN - OPUS4-18306 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gradt, Thomas T1 - Wear Resistant MoS2/ta-C Coatings for Applications in Various Environments T2 - 19th International Vacuum Congress (IVC-19) CY - Paris, France DA - 2013-09-09 PY - 2013 AN - OPUS4-29126 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Theiler, Geraldine A1 - Hübner, Wolfgang A1 - Gradt, Thomas A1 - Klein, P. A1 - Friedrich, K. T1 - Tribologisches Verhalten der Werkstoffpaarung Polymerverbundwerkstoff/Stahl bei tiefen Temperaturen KW - Kryotechnik KW - Polymerkomposite KW - PTFE KW - PEEK KW - Flüssigwasserstoff KW - Flüssighelium KW - Reibungszahlen KW - Übertrag PY - 2005 SN - 0724-3472 VL - 52 IS - 1 SP - 20 EP - 25 PB - Expert Verlag CY - Renningen AN - OPUS4-12645 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Theiler, Geraldine A1 - Gradt, Thomas T1 - Influence of hydrogen environment on the tribological performance of polymer composites T2 - WHEC 2006 - 16th World Hydrogen Energy Conference CY - Lyon, France DA - 2006-06-13 KW - Polymer composites KW - Tribological behaviour KW - Low temperatures KW - Hydrogen environment PY - 2013 SN - 978-1-62276-540-9 SP - CD #153 / 654 EP - 662 PB - International Association for Hydrogen Energy CY - Lyon AN - OPUS4-12646 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Theiler, Geraldine A1 - Gradt, Thomas T1 - MoS2-filled PEEK composite as a self-lubricating material for aerospace applications T2 - 40th Aerospace mechanisms symposium CY - Cocoa Beach, FL, USA DA - 2010-05-12 KW - PEEK composite KW - MoS2 KW - Friction KW - Ultra high vacuum KW - Aerospace PY - 2010 IS - NASA/CP-2010-216272 SP - 347 EP - 351 CY - Hanover, MD, USA AN - OPUS4-22047 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gradt, Thomas A1 - Theiler, Geraldine A1 - Hale, H. T1 - Reibeigenschaften von Polymerfolien in Flüssighelium N2 - Starke Magnetfelder, wie sie z.B. für die Magnetresonanztomografie (MRT) notwendig sind, werden durch supraleitende Spulen erzeugt, die mit Flüssighelium auf eine Temperatur von -269°C gekühlt werden. Die Reibungswärme, die z.B. bei kleinsten Bewegungen zwischen der Spule und deren Stützstruktur entsteht, kann bewirken, dass die kritische Temperatur des Supraleiters lokal überschritten wird und ein normalleitender Bereich entsteht. Aufgrund der bei Normalleitung entstehenden jouleschen Wärme kann sich dieser Bereich weiter erwärmen und schnell ausbreiten. Dieser Vorgang wird als Quench bezeichnet und führt zum schlagartigen Verdampfen des extrem teuren Kältemittels und zu Betriebsunterbrechungen von mehreren Tagen. Da diese Quenche durch Reibungswärme verursacht werden, ist es notwendig, das Reibverhalten der beteiligten Werkstoffe so zu optimieren, dass kein kritischer Betriebszustand erreicht wird. Dies betrifft in erster Linie Polymerfolien, die zur elektrischen Isolierung zwischen der Spule und der Stützstruktur notwendig sind. Neben zu hoher Reibung allgemein müssen ausgeprägte Haftreibungsspitzen und StickSlip-Effekte vermieden werden. Mit diesem Ziel wurde das Reibverhalten von PTFE-, PET- und Pl-Folien bei tiefen Temperaturen und den für diese Anwendung typischen niedrigen Gleitgeschwindigkeiten untersucht. Es zeigte sich, dass die Reibung zwischen Polymeroberflächen in Flüssighelium allgemein höher, aber stabiler als in Flüssigstickstoff ist. Allerdings hängt das Reibverhalten erheblich von der Werkstoffpaarung ab. Der Stick-Slip-Effekt nimmt bei allen untersuchten Polymer-Polymer-Paarungen mit wachsender Kontaktpressung zu. PET gegen PET hat das ungünstigste Reibverhalten und sollte bei hohen Pressungen vermieden werden. Zum Vergleich getestete Paarungen von Polymeren gegen Aluminium zeigten deutlich günstigeres Reibverhalten ohne signifikanten Stick-Slip. Deshalb sollte bei derartigen Anwendungen sichergestellt werden, dass die Gleitebene zwischen Polymer- und Metalloberfläche liegt. T2 - 55. Tribologie-Fachtagung - Reibung, Schmierung und Verschleiß - Forschung und praktische Anwendungen CY - Göttingen, Germany DA - 22.09.2014 PY - 2014 SN - 978-3-00-046545-1 VL - II SP - 41/1 EP - 41/10 AN - OPUS4-31529 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Theiler, Geraldine A1 - Gradt, Thomas T1 - Einfluss von Wasserstoff auf das Gleitverhalten von graphitgefüllten Polymeren N2 - Die tribologischen Eigenschaften von graphitgefüllten Polyimiden gegen Stahl 100Cr6 wurden an Luft, im Hochvakuum (10'3 Pa), und in Wasserstoffumgebung bei verschiedenen Drücken (103 Pa, 104 Pa und 105 Pa) untersucht. Zwei unterschiedliche Polyimid-Typen wurden eingesetzt, wobei Typ und Menge des Graphits variiert wurden. Die Experimente wurden bei 3,1 MPa Kontaktdruck und einer Gleitgeschwindigkeit von 0,2 m/s bzw. 1 m/s durchgeführt. Die verschlissenen Oberflächen und die Morphologie des Materialübertrags auf die Stahl-Gegenfläche wurden mit Lichtmikroskopie, REM, TEM und FTIR untersucht. Der Vergleich der untersuchten Werkstoffe zeigt, dass sowohl die Matrix als auch der Graphitanteil einen Einfluss auf das Reibverhalten in den verschiedenen Umgebungen haben. T2 - 55. Tribologie-Fachtagung - Reibung, Schmierung und Verschleiß - Forschung und praktische Anwendungen CY - Göttingen, Germany DA - 22.09.2014 PY - 2014 SN - 978-3-00-046545-1 VL - II SP - 35/1 EP - 35/11 AN - OPUS4-31530 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Theiler, Geraldine A1 - Brice, H. A1 - Gradt, Thomas T1 - Stick-slip behaviour of polymer films in LHe N2 - Superconducting magnets are susceptible to quenching, even with the smallest amounts of energy disturbances due to the extremely low thermal capacity of materials at 4.2 K. Hence, small mechanical disturbances resulting in frictional heating can be sufficient to exceed the wire’s critical temperature, causing it to quench. Unfortunately, relative motion between surfaces in the magnet System is inevitable due to various forces present in the System, including winding pretension, differences in material thermal contraction and the large electromagnetic forces. Typically insulating polymers are present at this interface to achieve the required electrical insulation requirements. T2 - WTC 2013 - 5th World tribology congress CY - Torino, Italy DA - 08.09.2013 PY - 2013 SP - Paper 366, 1 EP - 4 AN - OPUS4-30940 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gradt, Thomas T1 - Reibeigenschaften von Polymerfolien in Flüssigkeiten T2 - 55. Tribologie-Fachtagung CY - Goettingen, Germany DA - 2014-09-22 PY - 2014 AN - OPUS4-31458 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -