TY - CONF A1 - Schenk, Gottfried A1 - Brackrock, Daniel A1 - Brekow, Gerhard A1 - Kreutzbruck, Marc A1 - Deutsch, W.A.K. A1 - Joswig, M. A1 - Maxam, K. A1 - Schuster, V. ED - Thompson, D.O. ED - Chimenti, D.E. T1 - Ultrasonic inspection system for automated round-bar-testing based on phased array technique N2 - Within a know-how transfer project funded by the government conventional ultrasonic technique was replaced by phased array technique for automated round-bar testing. Instead of applying a great number of conventional probes to achieve acceptable volume coverage we used curved linear arrays. The benefits of phased array technique such as programmable skew angles, beamforming and beam positions, led not only to a significant decrease in inspection time, but also the number of probes could be substantially reduced . Finally, the testing parameters for a large range of bar-diameters could be adapted by software control instead of time-consuming mechanical replacement. The probe-design was carried out by a proprietary modelling program. Both the theoretical calculations as well as the latter experimental verifications revealed significant advantages of curved arrays versus the planar types. A radial oriented probe offers perfect adaption to the cylindrical shape of the specimen allowing wide variations of the sound field. Thus beam direction, beam size and beam position could be optimized with respect to a minimum of inspection cycles, as inspections have to be executed in-line during the production. A number of laboratory tests were carried out on special test components. In order to achieve an optimal performance of the reference rod we implemented three different types of reference reflectors: (i) flat-bottom-holes with diameters of 0.8 mm and 1.2 mm, (ii) side-drilled-holes with a diameter of 0.7 mm for the detection of volumetric flaws, and (iii) notches with a depth of 0.2 mm and 0.5 mm for the detection of surfaceoriented defects. All laboratory tests were carried out with the COMPAS-XXL inspection system, a proprietary development of BAM. T2 - 36th Annual Review of Progress in Quantitative Nondestructive Evaluation CY - Kingston, RI, USA DA - 2009-07-26 KW - Ultrasonic testing KW - Phased array KW - Round bar testing PY - 2010 SN - 978-0-7354-0748-0 SN - 0743-0760 SN - 0094-243X N1 - Serientitel: AIP conference proceedings – Series title: AIP conference proceedings VL - 29 SP - 1 EP - 7 CY - Melville, NY AN - OPUS4-21817 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schenk, Gottfried A1 - Erhard, Anton A1 - Döring, Joachim A1 - Möhrle, Walter T1 - Gerät zur Linearabtastung mit Strahlergruppen (Real-Time-Scanner-Gerät) N2 - Im Labor für Ultraschallverfahren der BAM wurde ein Gerätesystem zum Betrieb von linearen Strahlergruppen entwickelt, aufgebaut und erprobt. Es besteht aus einer Geräteeinheit mit 64 Sende- und 64 Empfangskanälen, einem Steuerrechner mit integriertem Transientenrekorder und wurde mit einem Linienarray mit 32 Elementen und einer Frequenz von 17 MHz erprobt. Das Schallbündel einer Gruppe von 8 Elementen kann per elektronischem Versatz über den Gesamtschwinger bewegt und dabei gleichzeitig geschwenkt und fokussiert werden. Dabei konnten Wanddicke'n von 0,5 mm sowie eine Anordnung von Flachbodenbohrungen mit 0,7 mm Durchmesser mit großer Genauigkeit nachgewiesen werden. Mögliche Anwendungen sind die Prüfung von Punktschweißverbindungen, die Korrosionsprüfung, die Prüfung von Flugzeugkomponenten, die Schweißnahtprüfung. T2 - DACH-Tagung 1996 CY - Lindau, Deutschland DA - 1996-05-13 PY - 1996 SN - 3-931381-07-0 VL - 52 SP - 541 EP - 548 AN - OPUS4-22934 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erhard, Anton A1 - Schenk, Gottfried A1 - Völz, Uwe A1 - Hauser, T. T1 - Anwendungsmöglichkeiten der Gruppenstrahlertechnik T2 - 25. MPA-Seminar CY - Stuttgart, Germany DA - 1999-10-07 PY - 1999 AN - OPUS4-18881 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schenk, Gottfried T1 - Ultrasonic Inspection System for automated Round-Bar-Testing based on Phased Array Technique T2 - 5th International Workshop Non-Destructive Testing in Progress CY - Prague, Czech Republic DA - 2009-10-12 PY - 2009 AN - OPUS4-20154 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schenk, Gottfried A1 - Brackrock, Daniel A1 - Brekow, Gerhard A1 - Kreutzbruck, Marc A1 - Deutsch, W.A.K. A1 - Joswig, M. A1 - Maxam, K. A1 - Schuster, V. ED - Mazal, Pavel T1 - Ultrasonic inspection system for automated round-bar-testing based on phased array technique T2 - 5th International workshop of NDT experts - NDT in progress 2009 CY - Prague, Czech Republic DA - 2009-10-12 KW - Ultrasonic testing KW - Phased array KW - Round bar testing PY - 2009 SN - 978-80-214-3968-9 SP - 253 EP - 259 AN - OPUS4-20338 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schenk, Gottfried T1 - Entwicklungsstand bei der Ultraschallprüfung von Radsatz-Vollwellen mit Gruppenstrahlern - Umsetzung der gewonnenen Betriebserfahrung T2 - DGZfP-DACH-Jahrestagung 2008 CY - St. Gallen, Switzerland DA - 2008-04-28 PY - 2008 AN - OPUS4-17446 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schenk, Gottfried T1 - Prüfkonzept mit Ultraschall-Gruppenstrahlern für die automatisierte Prüfung mit Stangen T2 - DGZfP-Jahrestagung 2009 CY - Münster, Germany DA - 2009-05-18 PY - 2009 AN - OPUS4-19405 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dohse, Elmar A1 - Kreutzbruck, Marc A1 - Schenk, Gottfried T1 - Vom "Logikgrab" zur Einchip-Lösung: Der Einsatz von FPGAs in digitalen Ultraschallgeräten T2 - DGZfP-Jahrestagung 2009 CY - Münster, Deutschland DA - 2009-05-18 KW - Ultraschall KW - Gerätetechnik PY - 2009 SN - 978-3-940283-16-0 IS - DGZfP-BB 115 ( Poster 36) SP - 1 EP - 2 AN - OPUS4-20515 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schenk, Gottfried A1 - Brackrock, Daniel A1 - Brekow, Gerhard A1 - Deutsch, W.A.K. A1 - Joswig, M. A1 - Maxam, K. A1 - Schuster, V. T1 - Prüfkonzept mit Ultraschall-Gruppenstrahlern für die automatisierte Prüfung von Stangen T2 - DGZfP-Jahrestagung 2009 CY - Münster, Deutschland DA - 2009-05-18 KW - Ultraschall-Gruppenstrahlertechnik KW - Automatisierte Stangenprüfung KW - Verkürzung der Umrüstzeiten KW - Erprobung an Stangentestkörpern KW - Erhöhung der Vorschubgeschwindigkeit KW - Aufbau einer Prototypenanlage PY - 2009 SN - 978-3-940283-16-0 IS - DGZfP-BB 115 (Di.1.C.4) SP - 1 EP - 8 AN - OPUS4-20508 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ploigt, Roy A1 - Dohse, Elmar A1 - Schenk, Gottfried A1 - Völz, Uwe T1 - Hohe Prüfgeschwindigkeit bei einem Gruppenstrahler-Prüfsystem - eine Herausforderung für die Entwickler T2 - DGZfP-Jahrestagung 2009 CY - Münster, Deutschland DA - 2009-05-18 KW - Ultraschall KW - Gerätetechnik PY - 2009 SN - 978-3-940283-16-0 IS - DGZfP-BB 115 ( Poster 37) SP - 1 EP - 5 AN - OPUS4-20510 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -