TY - GEN A1 - Jacobasch, Stefan A1 - Duffner, Eric A1 - Goedecke, Thomas A1 - Portella, Pedro Dolabella A1 - Mair, Georg A1 - Schendler, Thomas A1 - Gradt, Thomas A1 - Askar, Enis A1 - Bartholmai, Matthias A1 - Schröder, Volkmar A1 - Maiwald, Michael A1 - Holtappels, Kai A1 - Tschirschwitz, Rico A1 - Neumann, Patrick P. T1 - Unser Beitrag zum Thema Wasserstoff N2 - Die BAM ist nahezu über die gesamte Wertschöpfungskette hinweg wissenschaftlich tätig. Von der sicheren und effizienten Wasserstofferzeugung (POWER-to-GAS), über die (Zwischen-)Speicherung von Wasserstoff in Druckgasspeichern bis hin zum Transport bspw. mittels Trailerfahrzeug zum Endverbraucher. Komplettiert werden die Aktivitäten der BAM durch die sicherheitstechnische Beurteilung von wasserstoffhaltigen Gasgemischen, die Verträglichkeitsbewertung von Werkstoffen bis hin zur Detektion von Wasserstoffkonzentrationen über geeignete Sensorik, auch mittels ferngesteuerter Messdrohnen (sog. UAV-Drohnen). Zudem untersucht die BAM proaktiv Schadensrisiken und Unfallszenarien für die Sicherheitsbetrachtung, um mögliche Schwachstellen aufzeigen und potenzielle Gefährdungen erkennen zu können. KW - Wasserstoff KW - Wasserstofferzeugung KW - Energiespeicherung KW - Gasdetektion KW - Risikoanalyse KW - Power-to-Gas KW - Explosionsschutz KW - Tribologie KW - Druckgasspeicher KW - Glasspeicher KW - Gassensorik KW - Mini-UAV PY - 2019 SP - 1 CY - Berlin AN - OPUS4-47960 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas T1 - Lebensdaueruntersuchungen an vergütetem 34 CrMo 4 bei spannungs- und gesamtdehnungsgesteuerter Versuchsführung T2 - Tagung Werkstoffprüfung 1988 CY - Bad Nauheim, Deutschland DA - 1988-12-01 PY - 1988 CY - Berlin AN - OPUS4-1763 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas T1 - Einsatz der Radionuklidtechnik zur Untersuchung des Verschleißverhaltens randschichtbehandelter und beschichteter Bauteile T2 - Tagung Werkstoffprüfung 1990 CY - Bad Nauheim, Deutschland DA - 1990-12-06 PY - 1988 CY - Berlin AN - OPUS4-1764 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas T1 - Bauartprüfung von Großpackmitteln für gefährliche Güter T2 - Gastvorlesung an der Ingenieurschule für Papier- und Verpackungstechnik CY - Altenburg, Germany DA - 1992-01-01 PY - 1992 AN - OPUS4-1765 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas T1 - Verpackungsprüfung bei der BAM T2 - 3. Berlin-Brandenburger Gefahrguttage CY - Berlin DA - 1994-11-21 PY - 1994 CY - Berlin AN - OPUS4-1766 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas T1 - Was ist wie und wo geregelt? T2 - DVZ/CUB-Tagung "Wie sicher ist die Ladungssicherung?" CY - Bonn, Deutschland DA - 1995-04-23 PY - 1995 CY - Bonn AN - OPUS4-1767 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas T1 - Rechtliche Rahmenbedingungen T2 - DVZ/CUB-Tagung "Wie sicher ist die Ladungssicherung?" CY - Bonn, Deutschland DA - 1996-04-23 PY - 1996 CY - Bonn AN - OPUS4-1768 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas T1 - Verpackung und Ladungssicherung T2 - ecomed Spezialseminare für Gefahrgutexperten CY - Bad Honnef, Deutschland DA - 1995-10-05 PY - 1995 PB - ecomed-Verlagsges. CY - Bad Honnef AN - OPUS4-1769 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas T1 - Bauartprüfung von Gefahrumschließungen T2 - Seminarvortrag für Technische Fachhochschule Berlin CY - Berlin, Germany DA - 1996-05-23 PY - 1996 AN - OPUS4-1770 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Goedecke, Thomas T1 - Lebensdaueruntersuchungen an Vergütungsstahl bei spannungs- und gesamtdehnungsgesteuerter Versuchsführung PY - 1988 SN - 0176-263X VL - 5 IS - 22-23 PB - Presse- u. Informationsreferat d. TU CY - Berlin AN - OPUS4-1771 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Goedecke, Thomas T1 - Einsatz der Radionuklidtechnik zur Untersuchung des Verschleißverhaltens randschichtbehandelter und beschichteter Bauteile (Abschlußbericht des EHD-Verbundvorhabens) PY - 1991 AN - OPUS4-1772 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - THES A1 - Goedecke, Thomas T1 - Lebensdaueruntersuchungen an vergütetem 34 CrMo 4 und an CuZn37 bei spannungs- und gesamtdehnungsgesteuerter Zug-Druck-Beanspruchung PY - 1991 SP - 1 EP - 165 CY - Berlin AN - OPUS4-1773 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Goedecke, Thomas T1 - Oberflächenrauheit kontinuierlich ermitteln - Eine Bewertungsgröße für schwingend beanspruchte Metallproben PY - 1993 SN - 0025-5300 IS - 9 PB - Carl Hanser Verlag CY - München AN - OPUS4-1774 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas T1 - Umweltsimulation von Verpackungen in der BAM T2 - Symposium "Gefahrgutverpackungen aus Wellpappe" CY - Berlin, Deutschland DA - 2002-10-25 PY - 2002 AN - OPUS4-1775 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas T1 - Stand der Normung T2 - AK-Prüfstellen der BAM CY - Unterlüß, Deutschland DA - 2002-10-08 PY - 2002 AN - OPUS4-1776 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas T1 - Testing of packagings for dangerous chemicals T2 - Conference on Chemical Safety CY - Portoroz, Slovenia DA - 2002-09-03 PY - 2002 AN - OPUS4-1777 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas T1 - Determination of Transportation Loads during a Container Transport to New York and back T2 - CEEES Workshop "Distribution Environment and Transportation Loads - a Key Factor for Safe Cargo Handling" CY - Brussels, Belgium DA - 2002-02-22 PY - 2002 AN - OPUS4-1778 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Goedecke, Thomas T1 - Selective Testing of Plastic Packagings for the Transport of Dangerous Liquids PY - 2002 SN - 1-587-16154-0 IS - 1 SP - 371 EP - 376 PB - CRC Press CY - Boca Raton AN - OPUS4-1779 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas T1 - Dichtheitsprüfung bei Bauartprüfung und Fertigung T2 - 6. Gefahrgut-Technik-Tage CY - Berlin, Deutschland DA - 2003-01-01 KW - Dichtheitsprüfung KW - Verpackungen KW - Gefahrgut KW - RID/ADR PY - 2003 VL - 6 SP - 1(?) EP - 5(?) PB - Storck CY - Hamburg AN - OPUS4-2839 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Goedecke, Thomas A1 - Schubert, Sven T1 - Rolling home PY - 2002 SN - 0016-5808 VL - 45 IS - 5 SP - 27 EP - 29 PB - Storck CY - Hamburg AN - OPUS4-1881 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas T1 - Determination of Transportation Loads during a Container Transport to New York and back T2 - CEES Workshop "Distribution Environment and Transportation Loads - a Key Factor for Safe Cargo Handling" CY - Brussels, Belgium DA - 2002-02-22 PY - 2002 AN - OPUS4-3484 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas T1 - Einführung eines Systems für den sicheren Transport und Umgang mit gefährlichen Gütern T2 - GTZ Projekt CY - Berlin, Germany DA - 2002-06-03 PY - 2002 AN - OPUS4-3485 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas T1 - Selective Testing of Plastic Packagings for the Transport of Dangerous Liquids T2 - Worldpak 2002, Michigan State University CY - Lansing, MI, USA DA - 2002-06-23 PY - 2002 AN - OPUS4-3486 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas T1 - Was ist wie und wo geregelt? T2 - DVZ/CUB-Tagung "Wie sicher ist die Ladungssicherung?" CY - Bonn, Germany DA - 1995-04-23 PY - 1995 AN - OPUS4-3138 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas T1 - Was ist wie und wo geregelt? T2 - DVZ/CUB-Tagung "Wie sicher ist die Ladungssicherung?" CY - Bad Homburg, Germany DA - 1995-05-16 PY - 1995 AN - OPUS4-3139 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Goedecke, Thomas T1 - Ladungssicherungs-Informations-System (LIS) - Ladungssicherung von Stückgut N2 - Eine sachgerechte Ladungssicherung ist immer so auszulegen, dass sämtliche im normalen Versandprozess auftretenden Belastungen berücksichtigt werden. Dazu gehören sowohl Vollbremsungen und Ausweichmanöver im Straßenverkehr als auch schwere See, Rangierbelastungen oder Spitzenbelastungen beim Containerumschlag. Um diesen Anforderungen gerecht zu werden, sind für die mit der Beladung von Ladegefäßen betrauten Personen praxisrelevante Kenntnisse über die Auswirkungen von Versandbelastungen unentbehrlich. Dieses Schulungshandbuch soll dazu beitragen, jenes praxisrelevante Wissen zu vermitteln, welches den mit der Beladung von Containern und anderen Ladegefäßen von Stückgut beauftragten Personen ein gezieltes und sachgerechtes Handeln ermöglicht. Dabei liegt es in der Natur dieses Handbuches, dass lediglich die theoretischen Grundlagen erarbeitet werden können, welche durch praktische Tätigkeiten und gezielte Übungen ergänzt werden müssen. Dazu werden diverse Kurse und praktische Übungen von unterschiedlichen Verbänden und Firmen angeboten. Die zu vermittelnden Schulungsinhalte sind thematisch in fünf unabhängige Module aufgeteilt, welche die Bausteine des praxisrelevanten Wissens darstellen, das für eine sachgerechte Ladungssicherung im Container erforderlich ist. In diesen Moduln werden die Themenbereiche "Versandbelastungen", "Ladungssicherungsmittel und -maßnahmen" sowie "Container und Containerbeladung" behandelt. Darüber hinaus sind separate Module für die Verdeutlichung der (wirtschaftlichen) Notwendigkeit und der rechtlichen Verantwortlichkeiten und den Bereichen "Gefahrgutverpackungen im Container" erarbeitet worden. Die Inhalte des Schulungshandbuches sind in Anlehnung an anerkannte Richtlinien, insbesondere die CTU-Packrichtlinien (CTU= Cargo Transport Unit), erarbeitet worden. PY - 2007 UR - http://www.tes.bam.de/de/regelwerke/ladungssicherung/dokumente/l-i-s_ladungssicherung-von-stueckgut_2007.pdf SP - 1 EP - 149 PB - Bundesanstalt für Materialforschung und -prüfung CY - Berlin AN - OPUS4-3514 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas T1 - Stand der Normung T2 - AK-Prüfstellen der BAM CY - Unterlüß, Germany DA - 2002-10-08 PY - 2002 AN - OPUS4-3524 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas T1 - Testing of packagings for dangerous chemicals T2 - Conference on chemical Safety CY - Portorož, Slovenia DA - 2002-09-03 PY - 2002 AN - OPUS4-3525 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas T1 - Umweltsimulation von Verpackungen in der BAM T2 - Symposium "Gefahrgutverpackungen aus Wellpappe" CY - Berlin, Germany DA - 2002-10-25 PY - 2002 AN - OPUS4-3526 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas A1 - Kraus, Werner A1 - Khatoun, Ali T1 - Permeation in plastic packagings with the risk of build up on an explosive atmosphere in freight containers T2 - 15th IAPRI World Conference On Packagings CY - Tokyo, Japan DA - 2006-10-03 PY - 2006 AN - OPUS4-12712 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas T1 - Übersichtsvortrag Baumusterprüfung von Verpackungen, Großverpackungen und IBC T2 - TFH Berlin CY - Berlin, Germany DA - 2003-12-09 PY - 2003 AN - OPUS4-5241 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas T1 - Dichtheitsprüfung bei Bauartprüfung und Fertigung T2 - 6. Gefahrgut-Technik-Tage Berlin 2003 CY - Berlin, Germany DA - 2003-11-13 PY - 2003 AN - OPUS4-5242 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas A1 - Müller, Karsten A1 - Rodner, Hans-Jochen T1 - The new drop test and bonfire test facilities on the open air test site of the Federal Institute for Materials Research and Testing (BAM) T2 - IAPRI Symposium 2005 CY - Campinas, Brazil DA - 2005-05-22 PY - 2005 AN - OPUS4-7618 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Loughery, Z. A1 - Goedecke, Thomas T1 - Analysis of UN/DOT for the stacking of dangerous goods T2 - ISTA TransPack Forum CY - Orlando, FL, USA DA - 2013-03-25 KW - Position KW - Compression KW - Unguided KW - Guided KW - UN stacking test KW - DIC PY - 2013 SP - 1 EP - 13(?) AN - OPUS4-28092 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas T1 - Vorstellung des Ladungssicherungs-Informations-Systems (LIS) der BAM T2 - Ladungssicherungs- und Gefahrguttag Mitteldeutschland (VCI/GBK) CY - Leuna, Germany DA - 2012-03-07 PY - 2012 AN - OPUS4-25673 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas A1 - Loughery, Zachary Daniel A1 - Menrad, Andreas A1 - Goodwin, D. T1 - Analysis of UN/DOT for the Stacking of Dangerous Goods T2 - ISTA TransPack Forum CY - Orlando, FL, USA DA - 2013-03-25 PY - 2013 AN - OPUS4-27978 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bartholmai, Matthias A1 - Goedecke, Thomas T1 - Ständig überwacht N2 - Mit dem Projekt SIGRID will die BAM Transpondertechnik für Gefahrguttransporte nutzbar machen. KW - Gefahrgut KW - RFID KW - BAM Datenbank Gefahrgut KW - Monitoring KW - Ladungssicherung PY - 2012 SN - 0944-6117 VL - 1 SP - 18 EP - 19 PB - Vogel CY - München AN - OPUS4-25324 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas A1 - Bethke, John T1 - Permeation in plastics packagings with the risk of creating explosive atmospheres in freight containers T2 - United Nations ECOSOC Committee of Experts on the TDG and on the GHS CY - Geneva, Switzerland DA - 2007-12-03 PY - 2007 AN - OPUS4-16298 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bethke, John A1 - Goedecke, Thomas A1 - Jahnke, Wolfgang T1 - Barrieren manchmal notwendig KW - Permeation KW - Gefahrguttransport KW - Container KW - Untere Explosionsgrenze KW - Explosionsfähiges Gemisch KW - Luftwechselrate KW - Klimamessfahrt PY - 2008 SN - 0016-5808 VL - 4 SP - 26 EP - 29 PB - Storck CY - Hamburg AN - OPUS4-17466 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas A1 - Balke, Christian A1 - Probst, Ulrich T1 - Test Facilities on the Open-Air Test Site of the Federal Institute for Materials Research and Testing (BAM) T2 - Dimensions. 06, The International Forum on Transport Packaging CY - San Antonio, Texas, USA DA - 2006-04-18 KW - Test Facilities KW - Fire Tests PY - 2006 SP - 1 EP - 7 AN - OPUS4-18430 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas T1 - Results of round robin tests with plastics packagings for the transport of dangerous goods and the consequences T2 - 16th IAPRI Word Conferece on Packaging CY - Bangkok, Thailand DA - 2008-06-08 PY - 2008 AN - OPUS4-18402 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas T1 - Permeation organischer Stoffe durch Wandungen von Kunststoffbehältern T2 - Behördern-Erfahrungsaustausch, BAM CY - Berlin, Germany DA - 2008-05-05 PY - 2008 AN - OPUS4-18418 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas A1 - Bethke, John A1 - Jahnke, Wolfgang T1 - Temperature and Air Change Rates in Freight Containers during Transport between Europe and Destinations in Asia and Australia T2 - Transport Packaging Forum ISTA CY - Orlando, FL, USA DA - 2008-03-17 PY - 2008 AN - OPUS4-18403 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas T1 - Temperature and Air Change Rates in Freight Containers during Transport between Europe and Destinations in Asia and Australia T2 - ISTA-China Packaging Symposium CY - Shanghai, China DA - 2007-09-25 PY - 2007 AN - OPUS4-18405 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas T1 - Test facilities on the open air test site of the Federal Institute for Materials Research and Testing (BAM) T2 - Dimensions 06, The international forum on Transport Packaging CY - San Antonio, TX, USA DA - 2006-04-18 PY - 2006 AN - OPUS4-14295 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas A1 - Bethke, John A1 - Jahnke, Wolfgang A1 - Kraus, Werner T1 - Permeation beim Gefahrguttransport im Container - Ermittlung explosionsfähiger Gemische beim Gefahrguttransport im Container unter normalen Beförderungsbedingungen T2 - VCI Arbeitskreis "Gefahrgutverpackungen" Firma Henkel CY - Düsseldorf, Germany DA - 2007-03-01 PY - 2007 AN - OPUS4-14563 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas A1 - Bethke, John A1 - Jahnke, Wolfgang A1 - Kraus, Werner T1 - Gefahr durch Permeation von Gefahrstoffen aus Kunststoffverpackungen beim Lufttransport T2 - Besprechung mit der Lufthansa Cargo AG, Flughafen Frankfurt am Main CY - Frankfurt am Main, Germany DA - 2007-03-02 PY - 2007 AN - OPUS4-14564 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas T1 - Performance and frequency of leakproofness tests for dangerous goods packagings T2 - 14th IAPRI World Conference on Packaging CY - Lidingo, Sweden DA - 2004-06-13 KW - Leakproofness KW - Dangerous goods KW - Packagings PY - 2004 SP - 1(?) EP - 6(?) AN - OPUS4-4911 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Goedecke, Thomas T1 - Baumusterprüfungen von Verpackungen KW - Verpackungen KW - Prüfung KW - Gefahrgut KW - Anerkennung von Prüfstellen PY - 2004 SP - 96 und 117 CY - Hamburg AN - OPUS4-4912 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Loughery, Zachary Daniel A1 - Menrad, Andreas A1 - Goedecke, Thomas A1 - Goodwin, D. T1 - Positional tolerance of packagings while using guided and unguided compression N2 - The purpose of this article is to demonstrate how the position of a package affects the results in guided and unguided compression tests. Digital image correlation (DIC) shows how localized stresses occur. The positions of the jerricans were moved 1 cm in every direction from the center. The different positions showed how guided and unguided compression applied different loads to thejerrican. Furthermore, the guided and unguided compressions were compared directly using DIC to show how areas of stress concentrations formed and the localized stress changed. In general, when testing the jerricans with unguided compression, the swivel platen tilted backwards because the rear side of the jerrican was not as stiff as the front side with the lid. Guided and unguided compression tests will give different results because the stress concentrations are different. The position of the jerrican in the stacking test has drastic affects on the outcome of the fest. The stresses between the jerrican bottom and stacking plate were analyzed with a sensor mat and compared the guided and unguided loads. Guided and unguided compression tests were performed on jerricans and small and large corrugated fiberboard boxes. The different methods produced different results affecting whether the test was passed or failed. T2 - 26th IAPRI Symposium on packaging CY - Espoo, Finland DA - 10.06.2013 KW - Position KW - Compression KW - Unguided KW - Guided KW - UN stacking test KW - Digital image correlation PY - 2013 SN - 978-951-38-7434-6 SP - 98 EP - 107 AN - OPUS4-28962 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas A1 - Farahbakhsh, Mahin A1 - Damm, David A1 - Daum, Werner A1 - Bartholmai, Matthias A1 - Hohendorf, Stefan T1 - Sicherung von Gefahrguttransporten durch RFID-Tags mit Sensorfunktionalität und integrierter Datenbank-Gefahrgut-Information (SIGRID) T2 - Transport Logistic 2013 Workschop Gefahrgut CY - Munich, Germany DA - 2013-06-05 PY - 2013 AN - OPUS4-29097 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas A1 - Menrad, Andreas A1 - Loughery, Zachary Daniel A1 - Goodwin, D. T1 - Analysis of UN/ISO/DOT for the Stacking Test of Dangerous Goods Packagings T2 - 26th IAPRI Symposium on Packaging CY - Espoo, Finland DA - 2013-06-10 PY - 2013 AN - OPUS4-29099 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas T1 - Containment Systems for Dangerous Goods T2 - ISTA China Packaging Symposium CY - Beijing, China DA - 2013-09-23 PY - 2013 AN - OPUS4-29100 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas T1 - Verification of the chemical compatibility of plastics packagings and IBCs for dangerous goods T2 - ISTA China Packaging Symposium CY - Beijing, China DA - 2013-09-23 PY - 2013 AN - OPUS4-29101 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas A1 - Martin, Carsten T1 - UHF RFID Three-dimensional performance analyzing system T2 - 18th IAPRI World packaging conference CY - San Luis Obispo, CA, USA DA - 2012-06-17 PY - 2012 SN - 978-1-60595-084-6 SP - 41 EP - 47 PB - DEStech Publications, Inc. CY - Lancaster, Pennsylvania, USA AN - OPUS4-29042 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Menrad, Andreas A1 - Goedecke, Thomas A1 - Gründer, Klaus-Peter A1 - Wagner, M.H. T1 - The internal pressure test in experiment and simulation - Influence of the wall thickness variation and the change of the packaging behavior after the impact of standard liquids N2 - The effect of the wall thickness variation of blow-moulded bodies made of high-density polyethylene on an internal pressure test after prestoring the packaging with standard liquids was evaluated in experiments and simulations. The objects of the investigation were jerrycans used for the transportation and storage of dangerous goods. The wall thickness was determined using two alternative methods to the magnetostatic measurement. These alternative methods are used for research purpose to get a volumetric model of the jerrycan wall as a geometric model for the simulation. The comparison of the experiments and the simulations of the internal pressure test were performed using the digital image correlation method. The integral strain and deformation of the whole jerrycan was detected by measuring the total mass of the jerrycan being filled with water during the internal pressure test. This is a suitable alternative to the optical measurements of local deformation by the digital image correlation method. Prestorage at 40°C without the influence of chemicals strengthens the jerrycan, whereas the swelling effect of butyl acetate and hydrocarbon mixture softens the jerrycan. The comparison with the experiment is necessary to verify the accuracy of the simulation. It shows that the deformation can be simulated more precisely by using the actual measured geometry. The weakening of the high-density polyethylene caused by a hydrocarbon mixture can be simulated using the Arrhenius equation. The aim of the simulation was to discover whether it is possible to use specimens to predict the behaviour of a packaging both after the influence of standard liquids. T2 - 18th IAPRI World packaging conference CY - San Luis Obispo, CA, USA DA - 17.06.2012 KW - Wall thickness KW - Internal pressure test KW - Finite element KW - Simulation KW - Jerrycan PY - 2013 DO - https://doi.org/10.1002/pts.1983 SN - 0894-3214 VL - 26 IS - 6 SP - 311 EP - 326 PB - Wiley CY - Chichester, UK AN - OPUS4-29282 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas T1 - Dangerous Goods package testing and the Special chemical compatibility of Europe Plastic-Package T2 - 2013 ISTA China Packaging Symposium CY - Beijing, China DA - 2013-09-25 PY - 2013 AN - OPUS4-29227 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas T1 - Containment Systems for Dangerous Goods T2 - Beijing Institute of Graphic Communication CY - Beijing, China DA - 2013-09-25 PY - 2013 AN - OPUS4-29231 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas A1 - Otremba, Frank A1 - Bethke, John A1 - Jahnke, Wolfgang T1 - Compalibility and Permeation of Plastics Packagings and Transport Risks T2 - International Transport and Environmental Conference 2009 CY - Durban, South Africa DA - 2009-03-03 PY - 2009 AN - OPUS4-19174 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas A1 - Ulrich, Armin T1 - Dangerous Goods Packaging Testing T2 - COSTHA Annual Forum CY - St. Petersburg, FL, USA DA - 2010-03-25 PY - 2010 AN - OPUS4-21303 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas A1 - Pettelkau, Alexander A1 - Hohendorf, Stefan A1 - Damm, David A1 - Farahbakhsh, Mahin A1 - Bartholmai, Matthias T1 - Securing of Dangerous Goods Transports by RFID-Tags with Sensor-Functionality and integrated Database "GEFAHRGUT" Information (SIGRID) T2 - 17th IAPRI World Conference on Packaging CY - Tianjin, China DA - 2010-10-12 PY - 2010 AN - OPUS4-22326 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Erhard, Anton A1 - Goedecke, Thomas A1 - Pötzsch, Klaus-Michael A1 - Pagenkopf, Marion T1 - Vibrations- und Stoßbelastungen an IBCs und Tankfahrzeugen N2 - Die unterschiedlichen Stoß- und Vibrationsbelastungen bei der Fahrt auf Straßen oder im freien Gelände dürften den meisten Lesern aus dem täglichen Leben bekannt sein. Je nach Ausführung und Zustand des Feder-/Dämpfungssystems eines Fahrzeuges spürt der menschliche Körper unterschiedliche Belastungen, die die Schmerzgrenze erreichen können. Diese dynamischen Belastungen werden auch auf Ladung, in unserem Fall auf die Gefahrgutumschließungen und auf das Gefahrgut, übertragen. Derartige Belastungen können durch entsprechende Stapelung und Sicherung der Ladung in ihren Auswirkungen gemindert werden. Für andere Belastungen, z. B. Stoß durch einen Auffahrunfall, sind Schutzsysteme am Heck des Fahrzeugs gefordert. Bei Tankfahrzeugen kann eine Beschädigung des Tanks durch einen solchen Auffahrschutz gemindert werden. Im vorliegenden Beitrag werden Ergebnisse von Vibrationsmessungen an Lastkraftwagen mit den Ergebnissen des Vibrationstests an einem Intermediate Bulk Container (IBC) verglichen. Berechnungen zum Auffahrschutz an Tankfahrzeugen werden Messergebnissen gegenübergestellt. KW - Gefahrgutverpackungen KW - Belastung KW - Tankfahrzeug KW - Unfallszenarien PY - 2010 DO - https://doi.org/10.3139/120.110100 SN - 0025-5300 N1 - Geburtsname von Pagenkopf, Marion: Nitsche, M. - Birth name of Pagenkopf, Marion: Nitsche, M. VL - 52 IS - 1-2 SP - 63 EP - 70 PB - Hanser CY - München AN - OPUS4-20835 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas A1 - Pettelkau, Alexander A1 - Hohendorf, Stefan A1 - Damm, David A1 - Bartholmai, Matthias A1 - Farahbakhsh, Mahin ED - Goedecke, T. T1 - Securing of dangerous goods transports by RFID-tags with sensor-functionality and integrated database "GEFAHRGUT" information (SIGRID) N2 - The project SIGRID investigates and assesses possibilities to enhance the safety and security of dangerous goods transports through the use of the latest RFID-technology. This technology can be used to greatly enhance the transparency of the supply chain and aid logistics companies in complying with regulations. In the context of SIGRID, customized RFID-Sensor-Tags have been developed that monitor dangerous goods during transport and help to prevent hazards by allowing timely countermeasures. In the case of a dangerous goods accident, the available information about the type, amount and condition of the dangerous goods can be used to accurately inform the relief forces. Unavailable or inaccurate information represents a significant problem for the relief forces. This often leads to a delay in the rescue operation, because relief forces must be aware of the substances involved to protect themselves effectively against them. SIGRID aims to close this information gap. To verify the practicability of the underlying concepts, a demonstrator will be build and tests of realistic scenarios will be conducted. T2 - 17th IAPRI World conference on packaging CY - Tianjin, China DA - 2010-10-12 KW - Dangerous goods KW - Sensors KW - Monitoring KW - RFID KW - WLAN KW - Electronic transport documents PY - 2010 SN - 978-1-935068-36-5 SP - 639 EP - 642 PB - Scientific research publishing AN - OPUS4-22313 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas A1 - Bartholmai, Matthias A1 - Farahbakhsh, Mahin A1 - Hohendorf, Stefan A1 - Damm, David A1 - Daum, Werner T1 - "SMART IBC" für eine sichere und wirtschaftliche Gefahrgutlogistik T2 - IAA-Symposium "Gefahrgut" CY - Hanover, Germany DA - 2012-09-24 PY - 2012 AN - OPUS4-26820 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas A1 - Daum, Werner A1 - Bartholmai, Matthias A1 - Damm, David A1 - Farahbakhsh, Mahin A1 - Hohendorf, Stefan T1 - Sicherheit von Gefahrguttransporten durch RFID-Tags - das Projekt SIGRID: Sensorfunktionalität mit integrierter Datenbank-GEFAHRGUT-Information T2 - 16. Gefahrgutkongress Meckelenburg-Vorpommern CY - Rostock, Germany DA - 2012-11-06 PY - 2012 AN - OPUS4-27112 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Geburtig, Anja A1 - Goedecke, Thomas A1 - Wachtendorf, Volker T1 - Combined impact of ultraviolet and chemical fluids on high-density polyethylene packaging material N2 - To investigate the ageing behaviour of filled plastic containers outdoors, square cuts of the wall of two high-density polyethylene (HDPE) types were exposed to ultraviolet (UV) radiation at their front side and to specific liquid chemicals (de-ionized water, surfactant or White Spirit) at their back. The UV radiant exposure at the front side was 80 MJ/m². To compare the actions of the different exposures, separate dark backside fluid exposures were performed, in parallel. Besides, UV weathering was carried out until a UV radiant exposure of 325 MJ/m², being roughly comparable to outdoor exposure of one year in Northern Australia. An unpigmented HDPE included in the investigation gave no sufficient protection for the White Spirit. In addition, it showed clear degradation after several of these exposures. In combination with the White Spirit, an increase of carbonyl bonds was measured, presumably assignable to degradation products of the White Spirit. For a pigmented HDPE material, with the implemented combined exposures, no relevant damage was observed, within applied the exposure period. KW - Weathering KW - UV KW - HDPE KW - Packaging PY - 2012 DO - https://doi.org/10.1002/pts.959 SN - 0894-3214 VL - 25 IS - 1 SP - 53 EP - 61 PB - Wiley CY - Chichester, UK AN - OPUS4-25417 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schlick-Hasper, Eva A1 - Bethke, John A1 - Vogler, Nico A1 - Goedecke, Thomas T1 - Flow properties of powdery or granular filling substances of dangerous goods packagings - Comparison of the measurement of the angle of repose and the determination of the Hausner ratio N2 - To ensure safety when transporting dangerous goods, it is important to specify the flow properties of the respective solid filling substance of the packagings. For this purpose, the angle of repose is currently used for the UN approvals in Germany. Measurements were carried out on 12 powdery or granular substances applying the angle of repose measuring methods customary in the test centres. The results of the methods differ significantly from each other. In addition, some of the techniques cannot be applied for very cohesive or coarse-grained materials. The results for the angle of repose show a strong scatter for some constellations (coefficient of variation more than 20 %). Safety during transport of dangerous goods cannot be guaranteed with this currently practiced system of measuring the angle of repose. As a consequence, an alternative parameter to characterize the flow properties of bulk materials should be used in the recognized test centers for dangerous goods packagings, such as the Hausner ratio. This approach leads to more precise test results for the substances examined (maximum coefficient of variation 2.8 %). It also has advantages in terms of applicability and occupational safety. Since the flow properties are safety-relevant, both in terms of mechanical safety and safety against the release of dangerous substances, the testing practice in the recognized test labs should be improved and standardized. KW - Sift-proofness KW - Powders KW - Flowability KW - Flow properties KW - Angle of repose KW - Hausner ratio PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-552990 DO - https://doi.org/10.1002/pts.2678 SP - 1 EP - 18 PB - Wiley online library AN - OPUS4-55299 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlick-Hasper, Eva A1 - Bruchno, Martin A1 - Goedecke, Thomas T1 - Release of Powdery or Granular Substances from Intact Dangerous Goods Bags During Road Transport - Analysis of the Causes and Development of a Test Concept N2 - Abstract: The leaks of dangerous goods from actually intact bags detected in the years 2018 to 2020 tend to be at an almost constant high level. These releases of powdery or granular dangerous goods represent violations of the sift-proofness required in the dangerous goods regulations. This article first analyzes the causes. The components of the bags that are affected by leaks are micro-perforations, joins and closures, in particular internal sleeve valves. A distinction must be made between bags closed in conformity with or contrary to the manufacturer's instructions. The particle release is determined by a number of influencing factors of the filling substance, the packaging and other boundary conditions. Therefore, a comprehensive test concept is developed in this work, which takes all these factors into account. The application of this test concept facilitates the planning of the test setup and the experiments. On this basis, the complex mechanisms involved in the release of solid substances can be systematically investigated in the test laboratory. To prevent releases of powdery or granular substances from intact bags, it is necessary that the user has access to the closing instructions and the relevant properties of the test substance used for the design type approval. Further experimental investigations are needed to assess whether filling substances change their properties during transport and whether this enables them to escape. T2 - IAPRI Member Conference 2021 CY - Online meeting DA - 15.06.2021 KW - Bags KW - Dangerous goods packagings KW - Sift-proofness KW - Particles KW - Leak PY - 2021 UR - https://whova.io/email/click/d11d7d6cf1c84dfdc8c12349468fe91c/c9af5bcf002312cff80d9b962d1014e4/ SN - 978-1-63821-160-0 SP - 390 EP - 405 PB - IAPRI CY - East Lansing, Michigan, USA AN - OPUS4-52786 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schlick-Hasper, Eva A1 - Bruchno, Martin A1 - Thomas, Goedecke T1 - Release of Powdery or Granular Substances from Intact Dangerous Goods Bags During Road Transport - Analysis of the Causes and Development of a Test Concept N2 - The leaks of dangerous goods from actually intact bags detected in the years 2018 to 2020 tend to be at an almost constant high level. These releases of powdery or granular dangerous goods represent violations of the sift-proofness required in the dangerous goods regulations. This article first analyzes the causes. The components of the bags that are affected by leaks are micro-perforations, joins and closures, in particular internal sleeve valves. A distinction must be made between bags closed in conformity with or contrary to the manufacturer's instructions. The particle release is determined by a number of influencing factors of the filling substance, the packaging and other boundary conditions. Therefore, a comprehensive test concept is developed in this work, which takes all these factors into account. The application of this test concept facilitates the planning of the test setup and the experiments. On this basis, the complex mechanisms involved in the release of solid substances can be systematically investigated in the test laboratory. To prevent releases of powdery or granular substances from intact bags, it is necessary that the user has access to the closing instructions and the relevant properties of the test substance used for the design type approval. Further experimental investigations are needed to assess whether filling substances change their properties during transport and whether this enables them to escape. KW - Bags KW - Dangerous goods packagings KW - Leak KW - Particles KW - Sift-proofness PY - 2021 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-527287 DO - https://doi.org/10.1002/pts.2575 SN - 0894-3214 VL - 34 IS - 7 SP - 435 EP - 446 PB - Wiley AN - OPUS4-52728 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schlick-Hasper, Eva A1 - Seidler, Oliver A1 - Goedecke, Thomas A1 - Kraume, M. T1 - Helium leak testing of dangerous goods packagings N2 - The International Dangerous Goods Regulations prescribe the immersion under water method (“bubble test”) as standard method for the leakproofness test of dangerous goods packagings. But this test procedure acts as a test method for leak localisation, not for quantitative leakage rates measurement. Additionally, the sensitivity in detecting leaks of small diameters is restricted, depending on the test liquid and the test pressure. The bubble test is not suitable for a comparison with quantitative limit leakage rates based on realistic transport conditions. This is especially important when estimating the risk of the formation of an explosive atmosphere during the intercontinental carriage of dangerous goods packagings in freight containers. To compare measured leakage rates with limit leakage rates, a quantitative leak testing procedure is required. Therefore a new approach for dangerous goods packagings is implemented: The pressure technique by accumulation using Helium as a tracer gas. This work presents the test equipment necessary for the quantitative measurement of Helium leakage rates through closures of different kinds of dangerous goods packagings. The essential steps to achieve good repeatable results are: A controlled Helium filling process to reach a defined test pressure in the test sample, a sufficient homogenisation of the Helium-air-mixture inside the test sample and the ensuring of a constant pressure level of the test sample during the test. The Helium loss rate of the accumulation chamber has to be measured separately to receive a correction factor for the measured leakage rates. Different constructional measures are introduced to prevent a disturbing influence of the Helium leakage rate of the filling valves on the measurement results. Methods to estimate the disturbing effect of Helium permeation through permeable parts of the test sample are also presented. As a supporting method for the experimental investigations the Helium sniffer test can be applied. This practical application-oriented advice can enable other users to establish a pressure technique by accumulation for their own technical field. T2 - 19th World Conference on Non-Destructive Testing CY - Munich, Germany DA - 13.06.2016 KW - Überdruckverfahren KW - Gefahrgutverpackungen KW - Dichtheit KW - Helium KW - Dangerous goods packagings KW - Leakproofness KW - Helium KW - Pressure technique PY - 2016 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-371376 UR - http://ndt.net/?id=19785 SN - 1435-4934 VL - 21 IS - 7 SP - 1 EP - 10 PB - NDT.net CY - Kirchwald AN - OPUS4-37137 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlick-Hasper, Eva A1 - Goedecke, Thomas A1 - Kraume, M. ED - Ziegahn, K.-F. T1 - Dichtheitsprüfung unter Verwendung von Prüfgasen N2 - Ziel einer Dichtheitsprüfung ist es entweder, mit einem quantitativen Prüfverfahren integrale Leckageraten zu messen, oder mittels eines lokalisierenden Verfahrens den genauen Leckageort aufzuspüren. In einigen Fällen kann das Betriebsmedium gleichzeitig das Prüfmedium sein, wenn geeignete Sensorik zu Verfügung steht. In anderen Fällen kann dies aus unterschiedlichen Gründen nicht möglich sein. Daher ersetzt man bei der Verwendung von Prüfgasverfahren das Betriebsmedium durch ein spezifisch nachweisbares Prüfgas. Für die Interpretation eines quantitativen Messergebnisses ist es notwendig, die Ist-Leckagerate mit einer zuvor berechneten Grenzleckagerate (maximal zulässige Leckagerate) zu vergleichen. Entspricht das für die Dichtheitsprüfung verwendete Prüfgas nicht dem Betriebsmedium, so ist hierfür eine Umrechnung von Leckageraten notwendig. Es wird ein Überblick über für die Dichtheitsprüfung gängige Prüfgase, deren Eigenschaften sowie Vor- und Nachteile gegeben. Die grundlegenden Prinzipien bei der Umrechnung von Leckageraten (Druckumrechnung; Temperaturumrechnung; Umrechnung der Gasart bzw. des Mediums) werden vorgestellt. T2 - 45. Jahrestagung der Gesellschaft für Umweltsimulation (GUS) CY - Stutensee-Blankenloch, Germany DA - 16. März 2016 KW - Dichtheit KW - Dichtheitsprüfung KW - Prüfgase KW - Dichtheitsprüfverfahren PY - 2016 SN - 978-3-9816286-7-8 SP - 223 EP - 237 AN - OPUS4-36151 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas T1 - A general overview of the UN testing of packagings N2 - The presentation gives an overview about the testing of packagings according to the UN-Recommendations. After an introduction of the worldwide recommendations and the European regulations some packaging tests are presented. Examples of the current work of the UN Subcommittee on packaging testing and some on going research on packaging tests are presented. T2 - ISTA TransPack Forum 2016 CY - Orlando, USA DA - 21.03.2016 KW - Dangerous goods packagings KW - UN recommendations KW - Transport PY - 2016 AN - OPUS4-36897 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja A1 - Goedecke, Thomas A1 - Wachtendorf, Volker ED - Sek, M.A. ED - Rouillard, V. ED - Bigger, S.W. T1 - Outdoor weathering of HDPE containers filled with nitric acid N2 - Jerrycans made from three different types of high-density polyethylene (HDPE) were exposed outdoors, for one Berlin summer season. They were filled with a 55 percent nitric acid solution (HN03), pure water, or air, and half of them were protected from sunlight by an UV absorbing canvas. Thus, the separate effects of UV radiation and nitric acid could be compared to the combined impact. Combined impact was mainly affected by decomposition of nitric acid, resulting in presence of reactive nitrogen oxides, increased oxygen partial pressure, and UV radiation energy, simultaneously in vapour phase. To investigate the degradation effects after the outdoor exposure, jerrycans were exposed to a so called hydraulic internal pressure test, similar to an approval test for dangerous goods packaging. After combined impact of UV radiation and nitric acid, internal pressure tests showed very fast failures, whereas after separate impacts no remarkable deteriorations were observed, compared to unaged jerrycans. T2 - 19th IAPRI World conference on packaging CY - Melbourne, Australia DA - 15.06.2014 KW - High-density polyethylene HDPE KW - Nitric acid HNO3 KW - Outdoor exposure KW - UV radiation KW - Weathering PY - 2014 SN - 978-1-86272-699-4 SP - 556 EP - 560 AN - OPUS4-31222 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schlick-Hasper, Eva A1 - Jahnke, Wolfgang A1 - Drousch, Björn A1 - Goedecke, Thomas A1 - Kraume, M. T1 - Experimental investigations concerning the sensitivity of the leakproofness test for dangerous goods packagings relating to the leak diameter N2 - The objective of this experiment was to verify that in regards to the leakproofness bubble test for packagings of dangerous goods, a reduction of the air overpressure from 0.2 to 0.1 bar can be compensated for by reducing the water surface tension to a value of approximately 33.2 mN/m by adding a wetting agent. It was experimentally proven that this method will yield the same leak diameters. This is important to avoid irreversible deformations during the leaktesting of intermediate bulk containers (IBCs) while using a test overpressure of 0.2 bar. Bubble test experiments were carried out on artificial borehole-shaped leaks manufactured of two different materials high density polyethylene (HDPE) and stainless steel by ultrashort pulse laser technology and with two different immersion test liquids (deionized water and a 0.1% Lutensol FSA fabric softener active 10 solution). The characteristic diameters of the boreholes investigated were from 11.5 to 30.3 µm in length. KW - Dangerous goods packaging KW - Leakproofness test KW - Bubble test KW - Leak KW - Ultrashort pulse laser PY - 2014 DO - https://doi.org/10.1002/pts.2029 SN - 0894-3214 VL - 27 IS - 4 SP - 327 EP - 339 PB - Wiley CY - Chichester, UK AN - OPUS4-30502 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bartholmai, Matthias A1 - Stoppel, Markus A1 - Petrov, Sergej A1 - Hohendorf, Stefan A1 - Goedecke, Thomas T1 - Two application examples of RFID sensor systems - Identification and diagnosis of concrete components and monitoring of dangerous goods transports N2 - The combination of radio-frequency identification (RFID) tags with different types of sensors offers excellent potential for applications with regard to identification, diagnosis, and monitoring. This should be demonstrated by means of two examples of actual developments carried out by the Federal Institute for Materials Research and Testing (BAM). The Identification and diagnosis of concrete components is a major task in the maintenance of critical infrastructure, for instance concrete bridges with heavy traffic volume. A feasibility study investigates the application of RFID sensor systems for this task. The second example reviews the transportation of dangerous goods. Using modern technologies enables promising possibilities to reduce accidents and to avoid non-conformity with transportation regulations. Project results demonstrate an innovative technical solution for monitoring of dangerous goods transports with RFID sensor systems. T2 - 13th IMEKO TC10 Workshop on technical diagnostics CY - Warsaw, Poland DA - 26.04.2014 KW - RFID Sensor systems KW - Monitoring KW - Bridge components KW - Dangerous goods PY - 2014 SN - 978-92-990073-3-4 SP - ID 0019, 111 EP - 115 AN - OPUS4-30990 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schlick-Hasper, Eva A1 - Goedecke, Thomas A1 - Kraume, M. T1 - Dichtheitsprüfung von Gefahrgutverpackungen unter Verwendung von Prüfschäumen N2 - Bei der Dichtheitsprüfung von Intermediate Bulk Containern (IBC) für gefährliche Güter ist gemäß den Gefahrgutvorschriften ein Prüfüberdruck von 0,2 bar anzuwenden. Hierbei ist die Verwendung von Prüfschäumen zulässig. In der Praxis kann es jedoch zu irreversiblen Verformungen des Prüflings kommen. Durch eine Reduzierung des Prüfüberdrucks auf nur 0,1 bar kann dies vermieden werden. Im Folgenden werden experimentelle Untersuchungen der Bundesanstalt für Materialforschung und -prüfung (BAM) vorgestellt, um die Gleichwertigkeit dieses Verfahrens mit den Gefahrgutvorschriften nachzuweisen. KW - Dichtheitsprüfung KW - Gefahrgutverpackungen KW - Prüfschäume KW - Bubble test PY - 2014 SN - 2191-0073 VL - 4 IS - 5 SP - 47 EP - 50 PB - Springer-VDI-Verl. CY - Düsseldorf AN - OPUS4-30652 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bethke, John A1 - Goedecke, Thomas A1 - Jahnke, Wolfgang T1 - Permeation through plastic dangerous goods packaging during transport in freight containers - Detection of potentially explosive mixtures in containers under normal conditions of carriage N2 - The key point within the scope of this research project was to find out whether there was a risk of creating an explosive atmosphere by permeation of flammable liquid compounds during transport of dangerous goods in freight containers under normal conditions of carriage. Therefore, all aspects that had an influence on the formation of such an atmosphere had to be considered. The most important influencing factors were permeation, air change in the freight container and ambient temperature. The first step was to investigate the permeation with different packaging materials, charge and temperatures. Furthermore, the air change rates of different freight containers were measured. A few climate tests with containers on ships, e.g. to Singapore, were performed to assess normal conditions of carriage. Another important point was measuring the solvent (toluene) concentration in the gas phase in a freight container loaded with plastic intermediate bulk containers (IBCs) filled with toluene. To confirm that the measured values were in the right range, the toluene concentration in the gas phase in a container was calculated with different packaging materials, air change rates and temperatures. The results of the measurements and calculations have shown that safety layers in the packaging wall, e.g. the copolymer of ethylene and vinyl alcohol (EVOH) and polyamide, can reduce the rate of permeation by more than a decimal power, but the lower explosive limit of toluene is easily reached within a few hours at 40°C charge temperature if there is no barrier. KW - Permeation KW - Air change KW - Dangerous goods KW - Lower explosive limit KW - Freight container PY - 2013 DO - https://doi.org/10.1002/pts.994 SN - 0894-3214 VL - 26 IS - 1 SP - 1 EP - 15 PB - Wiley CY - Chichester, UK AN - OPUS4-31075 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas T1 - Aktivitäten im Bereich Verpackungsforschung durch IAPRI - (I)nternational (A)ssociation of (P)ackaging (R)esearch (I)nstitutes T2 - 12. Gefahrgut-Technik-Tage Berlin "Gefahrgut-Verpackungen", BAM CY - Berlin, Germany DA - 2009-11-12 PY - 2009 AN - OPUS4-20387 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas T1 - Vorstellung des Ladungssicherungs-Informations-Systems (LIS) der BAM T2 - Internationaler Ladungssicherungskongress CY - Frankfurt am Main, Germany DA - 2009-09-30 PY - 2009 AN - OPUS4-23088 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas T1 - Chemische Verträglichkeitsprüfung von Gefahrgutverpackungen aus Kunststoff T2 - Workshop II, Innovation mit Normen und Standards CY - Nuremberg, Germany DA - 2009-09-29 PY - 2009 AN - OPUS4-23089 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas T1 - Vorstellung Ladungssicherheits-Informations-System (LIS) der BAM T2 - LaSi Kongress "Ladungssicherung in Theorie und Praxis" CY - Leuna, Germany DA - 2010-03-17 PY - 2010 AN - OPUS4-23090 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Goedecke, Thomas A1 - Bethke, John A1 - Jahnke, Wolfgang A1 - Otremba, Frank ED - Karl-Friedrich Ziegahn, T1 - Ermittlung explosionsfähiger Gemische beim Gefahrguttransport unter normalen Beförderungsbedingungen T2 - 38. Jahrestagung der GUS 2009 - Umwelteinflüsse erfassen, simulieren, bewerten CY - Karlsruhe DA - 2009-03-18 KW - Permeation KW - Packagings for dangerous goods KW - Freight containers KW - Explosive atmosphere KW - Solvents PY - 2009 SN - 978-3-9810472-7-1 IS - V 19 SP - 227 EP - 237 PB - DWS Werbeagentur und Verlag GmbH CY - Karlsruhe AN - OPUS4-23256 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erhard, Anton A1 - Goedecke, Thomas A1 - Menrad, Andreas A1 - Bethke, John T1 - Application of nondestructive testing - Methods for packaging examination N2 - Nondestructive testing (NDT) methods are applicable in many ways for defect detection as well as optimization of packaging production processes. The visual inspection method is the technique which is mostly used, although neither the customer nor a skilled inspector may be aware of this. Techniques like ultrasound for wall thickness measurement, the application of x-ray techniques or the use of dye penetrant techniques for crack detection are rather well known to the NDT family. However, acoustic emission techniques can also be helpful for the characterization of packaging materials. In this paper the employment of x-ray computer tomography (CT) for measurement of wall thickness in plastic jerrycans, especially on the edges, and its possible optimization of production processes will be discussed. A comparison of the CT and ultrasonic examinations of wall thickness and the reliability of this measured data are also important points for the discussion, especially if some safety factors can be derived from the results. The leakage test is also good for jerrycans, IBCs or other kinds of drums for the transportation and storage of dangerous goods. The disadvantage of this kind of test is that a lack of quality, e.g. wall thickness deterioration, cannot be detected if the wall thickness withstands the internal pressure. Therefore, especially for Quality assurance, the other, previously mentioned techniques are better for a statistical assessment of a batch. This paper is focused on the comparison of different NDT results with special emphasis on the large range of material mechanical properties. T2 - 25th IAPRI Symposium on Packaging CY - Berlin, Germany DA - 16.05.2011 KW - Materialeigenschaft KW - Zerstörungsfreie Prüfung KW - Computertomographie KW - Kunststoffbehälter PY - 2011 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-239191 SN - 978-3-940283-31-3 VL - 126 SP - 1 EP - 7 PB - Deutsche Gesellschaft für Zerstörungsfreie Prüfung (DGZfP) CY - Berlin AN - OPUS4-23919 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hilbert, F. A1 - Kuschke, Christian A1 - Goedecke, Thomas A1 - Neumeyer, Tino T1 - Drop testing of the NCS 45 T2 - PATRAM 2007, 15th International Symposium on the Packaging and Transportation of Radioactive Materials CY - Miami, Florida, USA DA - 2007-10-21 KW - Drop tests KW - Scale model PY - 2007 SP - 1 EP - 8 PB - Institute of Nuclear Materials Management AN - OPUS4-18644 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas T1 - Dangerous goods Packaging T2 - 6th International Packaging Congress, CY - Istanbul, Turkey DA - 2010-09-16 PY - 2010 AN - OPUS4-22214 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas A1 - Klinger, Christian T1 - Influences of shock amplitudes and directions on movement of loose cargo on load platforms T2 - 23rd IAPRI Symposium on Packaging CY - Windsor, England DA - 2007-09-03 PY - 2007 AN - OPUS4-22960 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas T1 - Gefahrgutrecht international / national N2 - Das Gefahrgutrecht international und national, Gesetze und Verordnungen, Normen und technische Regeln T2 - IAA Nutzfahrzeuge CY - Hannover, Germany DA - 27.09.2016 KW - Gefahrgut PY - 2016 AN - OPUS4-38162 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlick-Hasper, Eva A1 - Schneider, Uwe A1 - Goedecke, Thomas A1 - Kraume, M. T1 - Durchströmung von Glaskapillaren mit Lachgas und Helium N2 - Distickstoffmonoxid (N2O, Lachgas) und Helium (He) sind gängige Prüfgase für Dichtheitsprüfungen. Die einfachste Leckgeometrie stellt ein ideal zylindrisches Rohr dar. Es wurden Glaskapillaren verschiedener Abmessungen mit Lachgas und Helium durchströmt. Der Überdruck am Kapillareingang lag zwischen 100 mbar und 400 mbar. Es handelte sich um vier annähernd zylindrische Glaskapillaren mit den mittleren Durchmessern: Kapillare 1: ca. 102 μm; Kapillare 2: ca. 71 μm; Kapillare 3B: ca. 49 μm; Kapillare 4: ca. 53 μm. Zudem wurde eine nichtzylindrische Kapillare geprüft (Kapillare 3A). Die Kapillaren 1, 2 und 3B wurden mit beiden Prüfgasen getestet. Kapillare 3A wurde nur mit Lachgas durchströmt, Kapillare 4 nur mit Helium. Für die Messung der Leckageraten kam das Überdruckverfahren mit Ansammlung (Verfahren B3 nach DIN EN 1779: 1999-10) zum Einsatz. Als Detektor für Lachgas diente der Lachgasdetektor Maihak Unor 6 N, für Helium der Leckdetektor T-Guard der Firma Inficon. Es wurden verschiedene Theorieansätze verglichen. Beim Theorieansatz Ib erfolgte die Umrechnung der Lachgas-Messwerte auf die Helium-Messwerte und umgekehrt anhand der Druck-, Temperatur- und Gasartabhängigkeit der Leckagerate für laminar-viskose Gasströmung (DIN EN 1779: 1999-10; DGZfP-Richtlinie DP2: 2009-12). Beim Theorieansatz II wurde die Berechnung der Leckagerate für die laminar-viskose Rohrströmung unter der Annahme einer ideal zylindrischen Kapillare durchgeführt. Zusätzlich wurde mit „ANSYS Fluent“ eine CFD-Simulation vorgenommen. Bei Kapillare 3A wurde eine Serienschaltung der Strömungsleitwerte von Rohr und Düse angesetzt. Bei Anwendung des Ansatzes Ib werden bei Umrechnung der Helium-Messwerte auf Lachgas die Lachgas-Messwerte überschätzt. Umgekehrt werden bei der Umrechnung der Lachgas-Messwerte auf Helium die Helium-Messwerte unterschätzt. Bei Analyse der Einlauflängen der Rohrdurchströmung ist festzustellen, dass diese für Lachgas stets größer als für Helium sind. Bei Lachgas liegt daher für einige Messwerte noch keine ausgebildete laminare Rohrströmung vor. Einlaufeffekte können somit nicht vernachlässigt werden. Als Fazit ergibt sich, dass bei Verwendung von Helium als Prüfgas und Umrechnung der Helium-Messwerte auf Lachgas die Lachgas-Leckageraten sicherheitstechnisch konservativ abgeschätzt werden. T2 - 7. DGZfP-Fachseminar Dichtheitsprüfung und Lecksuche CY - Dortmund, Germany DA - 20.09.2016 KW - Laminare Strömung KW - Glaskapillaren KW - Lachgas KW - Helium PY - 2016 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-380965 UR - http://www.dgzfp.de/seminar/lecksuche/Pr%C3%A4sentationen SP - 1 EP - 15 AN - OPUS4-38096 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schlick-Hasper, Eva A1 - Bethke, John A1 - Jahnke, Wolfgang A1 - Drousch, Björn A1 - Goedecke, Thomas A1 - Kraume, M. T1 - Maximum gauge pressure in dangerous goods packagings under normal conditions of carriage - comparison of direct measurement and calculation N2 - The objective of this work was to determine the maximum gauge pressure in the vapour phase above the liquid in different design types of dangerous goods packagings under normal conditions of carriage. The design types investigated were steel and plastic packagings with a volume of approximately 6 l. Two different methods were applied. In method 1, the pressure inside the packaging filled with a certain filling substance (dichloromethane) was directly measured under simulated conditions of carriage (degree of filling: 90%; filling temperature: 15°C; temperature during storage: 31°C). The maximum measured gauge pressures were between 89 mbar for a light plastic jerrican and 336 mbar for a steel drum. In method 2, the gauge pressure was calculated. The consideration of a rigid packaging combined with the assumption of a vapour pressure of zero during filling and sealing can serve as a worst case scenario. The calculated gauge pressure is approximately 1061 mbar. This procedure leads to the highest safety factor and does not require any experimental investigations. For a more realistic approximation of the gauge pressure of a non-rigid packaging, a packaging-specific function of relative expansion can be used, which is determined by a hydraulic pressure test. The calculated values ranged from 105 to 347 mbar. Method 2 provides conservative results. No hazardous filling substance is needed, and it allows a prediction of gauge pressure for other temperatures, substances and filling degrees. Therefore, this method could serve as alternative to UN Model Regulations 6.1.5.5.4 (a). KW - Dangerous goods packagings KW - Gauge pressure KW - Overpressure KW - Relative expansion KW - Data loggers KW - Normal conditions of carriage KW - Gefahrgutverpackungen KW - Überdruck KW - Relative Ausdehnung KW - Datenlogger KW - Normale Beförderungsbedingungen PY - 2015 DO - https://doi.org/10.1002/pts.2111 SN - 0894-3214 VL - 28 IS - 5 SP - 437 EP - 460 PB - Wiley & Sons, Ltd. CY - Chichester, UK AN - OPUS4-33108 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlick-Hasper, Eva A1 - Bethke, John A1 - Jahnke, Wolfgang A1 - Goedecke, Thomas A1 - Kraume, M. T1 - Normale Beförderungsbedingungen beim Gefahrguttransport im Frachtcontainer und ihr Einfluss auf den inneren Überdruck in Gefahrgutverpackungen N2 - Der innere Überdruck, der sich unter Beförderungsbedingungen im freien Dampfraum einer Gefahrgutverpackung bildet, die mit einer gefährlichen Flüssigkeit gefüllt ist, hängt von verschiedenen Faktoren ab: Den spezifischen Stoffeigenschaften des jeweiligen Füllguts, dem Füllgrad, der Nachgiebigkeit der Verpackungsbauart, der Befülltemperatur und der Temperatur bei Beförderungsbedingungen. Zu den normalen Beförderungsbedingungen von befüllten Gefahrgutverpackungen zählt der interkontinentale Transport in Frachtcontainern. Es werden die Ergebnisse einer Klimamessfahrt vorgestellt, die mit einem instrumentierten Frachtcontainer auf der Fahrt von Hamburg nach Singapur und zurück gewonnen wurden. Hierdurch lassen sich durchschnittliche und maximale Beförderungstemperaturen beim interkontinentalen Containertransport ermitteln. Es werden Modellgleichungen vorgestellt, mit denen sich für verschiedene Annahmen der sich einstellende Überdruck in einer Gefahrgutverpackung berechnen lässt. T2 - 44. Jahrestagung der GUS 2015 CY - Stutensee-Blankenloch, Germany DA - 25.03.2015 KW - Gefahrgutverpackungen KW - Frachtcontainer KW - Überdruck PY - 2015 SN - 978-3-9816286-4-7 SP - 179 EP - 193 AN - OPUS4-33072 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas T1 - UN testing and approval of packaging for dangerous goods T2 - The 2nd International Conference of Packaging Technology and Science - The 2nd Asian Packaging Network Confernence CY - Wuxi, China DA - 2014-10-16 PY - 2014 AN - OPUS4-32347 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja A1 - Goedecke, Thomas A1 - Wachtendorf, Volker ED - Reichert, T. T1 - A new irradiation device for medium scale plastic products N2 - A new irradiation device for the exposure of plastic products is presented. Developed in the BAM division 3.1 "Dangerous Goods Packaging" it can be used for artificial UV irradiation of plastic Containers filled with hazardous liquids. Present regulations and tests only investigate the exposure effects of UV and of media separately, but as the damaging effect is expected to be synergistic for at least some media, a combined test was looked for. A chamber of 60 cm by 60 cm base area and 1 m height gives space for up to 40 cm wide objects. Two fluorescent UV lamp arrays are arranged on opposite walls, separated from the chamber by quartz glass panes. By continuously rotating the exposure object by means of a rotary disc that the object is placed on, spatial irradiation homogeneity is achieved over the exposure duration. The spectral irradiance of the chosen UVA 340 nm lamps gives the best match of global solar radiation in the short wavelength ränge. The close arrangement of the UVA lamps (15 each side) results in 60 W m'2 UV irradiance. Constant temperature is adjusted to typically 40 °C by the control of the fan speed. This temperature is chosen, as it is the required temperature for three week storage of filled polyethylene Containers, for proving Chemical compatibility in the field of dangerous goods. To ensure homogeneity, an interiorfan provides for air circulation. T2 - 7th European weathering symposium - Natural and artificial ageing of polymers CY - Naples, Italy DA - 16.09.2015 KW - Weathering KW - UV irradiation PY - 2015 SN - 978-3-9816286-6-1 N1 - Serientitel: CEEES Publication – Series title: CEEES Publication IS - 17 SP - 91 EP - 96 AN - OPUS4-34353 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bartholmai, Matthias A1 - Stoppel, Markus A1 - Petrov, Sergej A1 - Hohendorf, Stefan A1 - Goedecke, Thomas T1 - Two application examples of RFID sensor systems-identification and diagnosis of concrete components and monitoring of dangerous goods transports N2 - The combination of RFID tags and energy efficient sensors offers promising potential for identification, diagnosis, and monitoring applications - particularly when it comes to objacts, which require continuous observation and which are difficult to access with conventional tools. This paper presents two examples as an outlook for RFID sensor systems in embedded structures and in mobile applications. KW - RFID sensors systems KW - Diagnosis of concrete components KW - Monitoring of dangerous goods PY - 2015 SN - 2221-870X VL - 4 IS - 2 SP - 85 EP - 89 CY - Braunschweig AN - OPUS4-33608 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gründer, Klaus-Peter A1 - Goedecke, Thomas A1 - Kadoke, Daniel A1 - Müller, Karsten A1 - Münzenberger, Sven A1 - Protz, Christian T1 - Prüfung von Gefahrgutumschließungen mit optischen 3D-Messverfahren N2 - Der Beitrag konzentriert sich auf bildgebende Messverfahren, die der dreidimensionalen Bestimmung mechanischer, geometrischer und kinematischer Parameter von Materialien und Bauteilen dienen. Das sind hier insbesondere die Mehrbildfotogrammetrie sowie die Stereomessverfahren, die auf folgenden physikalisch-optischen Grundlagen beruhen: die zeit- und raumveränderliche Projektion von Lichtstreifensystemen, die Bildkorrelation mittels Grauwertmustern und die Verfolgung kontrastreich applizierter Punkttargets. Letztendlich werden aus den gemessenen Punktkoordinaten unterschiedlicher Dichte und Belastungszustände die gewünschten 3D-Parameter abgeleitet. Hierzu gehören z. B. die Oberflächengestalt und deren Verformung, approximierte 3D-Geometrielemente, veränderliche 6DoF-Starrkörperorientierungen, Vektorverschiebungsfelder, Oberflächendehnung, Koordinaten-Zeit-Funktionen, Geschwindigkeit und Beschleunigung. Diese Kenngrößen sind beispielsweise für die Ermittlung mechanischer Werkstoffeigenschaften und -kennwerte bis hin zur Form- und Verformungsmessung von Bauteilen in gezielt quasi-statisch oder dynamisch beanspruchenden Prüfeinrichtungen wichtig. Vorteilhaft für die praktische Anwendung dieser Verfahren ist insbesondere, dass sie berührungslos arbeiten, kombiniert werden können und skalierbar sind z. B. hinsichtlich Messvolumen, Auflösung, Genauigkeit und Koordinatensystemen der zu bestimmenden 3D-Punktkoordinaten an Materialoberflächen bzw. Komponenten. Ausgehend von der Beschreibung der messtechnischen Prinzipien dieser Verfahren sollen zwei Anwendungsbeispiele aus dem Bereich der Gefahrgutbehäl-terprüfung im Rahmen von Bauartzulassungen und der normungsbegleitenden Mate-rialforschung den Stand in der Anwendungspraxis aufzeigen und einen Eindruck hinsichtlich der flexiblen Einsatzmöglichkeiten dieser optischen 3D-Verfahren verdeutlichen. T2 - 4. Fachseminar Optische Prüf- und Messverfahren CY - Hamburg, Germany DA - 17.03.2015 KW - 3D-Messverfahren KW - Verformung KW - Dehnung KW - Bremsbeschleunigung PY - 2015 SP - Vortrag 9, 1 EP - 10 AN - OPUS4-32808 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlick-Hasper, Eva A1 - Goedecke, Thomas A1 - Kraume, M. T1 - Überdruck in Gefahrgutverpackungen unter normalen Beförderungsbedingungen N2 - Für die Durchführung einer Dichtheitsprüfung und für die Bewertung des Ergebnisses ist es wichtig, den sich unter Betriebsbedingungen im Prüfobjekt einstellenden Überdruck zu kennen. Entspricht der Prüfüberdruck nicht dem Betriebsüberdruck, so ist es oft erforderlich, die unter Prüfbedingungen gemessenen Leckageraten auf den realen Betriebsüberdruck umzurechnen. Im Bereich der Gefahrgutverpackungen ist jedoch der spätere maximale Betriebsüberdruck nicht genau bekannt. Er hängt für jede einzelne Verpackungsbauart von dem eingefüllten Füllmedium mit seinen spezifischen Stoffeigenschaften, dem Füllgrad sowie den Beförderungsbedingungen, insbesondere der mittleren Transporttemperatur, ab. Es werden Berechnungsansätze vorgestellt, mit denen sich der Überdruck in Gefahrgutverpackungen unter Beförderungsbedingungen rechnerisch ermitteln lässt. Die theoretisch berechneten Überdrücke werden mit Überdruck-Messwerten verglichen, die mit verschiedenen Füllmedien in unterschiedlichen Verpackungsbauarten ermittelt wurden. T2 - DACH-Jahrestagung 2015 CY - Salzburg, Austria DA - 11.05.2015 KW - Gefahrgutverpackungen KW - Überdruck PY - 2015 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-332563 SN - 978-3-940283-68-9 IS - DGZfP BB 152 SP - Di.3.B.1, 1 EP - 13 AN - OPUS4-33256 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas T1 - UN Regulations for Dangerous Goods Packagings T2 - National Dangerous Goods Transportation and Package Symposium CY - Tianjin, China DA - 2015-04-23 PY - 2015 AN - OPUS4-33286 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas A1 - Menrad, Andreas A1 - Gründer, Klaus-Peter ED - Ziegahn, K.-F. T1 - Vergleich Experiment und numerische Simulation bei der hydraulischen Innendruckprüfung von Kunststoffverpackungen N2 - Beim Transport von aggressiven und gefährlichen Gütern in Kunststoffverpackungen kann es zu unerwünschten Materialveränderungen kommen. Daher erfordert der Einsatz entsprechender Verpackungen eine genaue Kenntnis der verwendeten Werkstoffe. Zum Transport gefährliche Flüssigkeiten sind u.a. Verpackungen aus Kunststoff (z. B. Kanister) erlaubt, wenn diese geprüft und als Gefahrgutverpackungen zugelassen sind. Eine Zulassung gilt nur für die spezifische Verpackungsbauart, welche die notwendigen Bauartprüfungen bestanden hat. Für die Zulassung als Gefahrgutverpackung sind verschiedene experimentelle Prüfungen erforderlich. Dazu zählt die hydraulische Innendruckprüfung, Im Folgenden werden Untersuchungen an extrusionsblasgeformten Kanistern aus Polyethylen hoher Dichte (HDPE) verschiedener Typen vorgestellt. Ziel der Arbeiten war es, einen Eignungsnachweis bezüglich Behälterkonstruktion, Werkstoffeigenschaften und Einsatzbedingungen im Sinne einer sicherheitstechnischen Bauartzulassung zu führen. Außerdem wurden die Einflüsse unterschiedlich schädigender Flüssigkeiten auf die mechanischen Eigenschaften des HDPE-Werkstoffes untersucht. Für die Bauartprüfung zum Nachweis der chemischen Verträglichkeit ist eine sechsmonatige Vorlagerung der Verpackungen mit Originalfüllgut vorgeschrieben. Diese Vorlagerung kann durch den Einsatz spezieller Standardflüssigkeiten auf 21 Tage bei 40° C. verkürzt werden. Die eingesetzten Chemikalien sind die sogenannten Standardflüssigkeiten, die exemplarisch für zahlreiche Stoffe bestimmte Schädigungen auslösen: • Netzmittellösung - spannungsrissauslösend • Essigsäure - spannungsrissauslösend • n-Butylacetat - quellend • Kohlenwasserstoffgemisch (White Spirit) - quellend • Salpetersäure - oxidierend T2 - 43. Jahrestagung der GUS 2014 CY - Stutensee-Blankenloch, Germany DA - 26.03.2014 PY - 2014 SN - 978-3-9816286-0-9 SP - 91 EP - 100 AN - OPUS4-32747 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas T1 - Überprüfung der Wirksamkeit der Prüf- und Zulassungsprozeduren für Gefahrgutverpackungen und IBC in Deutschland T2 - Ständiger Ausschuss Gefahrgutbeförderung (AGGB) des Beirats CY - Bonn, Deutschland DA - 2014-06-05 PY - 2014 AN - OPUS4-32667 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas A1 - Schlick-Hasper, Eva T1 - Alternative Prüfverfahren für Aerosoldosen T2 - IGA Herbstforum (Industriegemeinschaft Aerosole e. V.) CY - Frankfurt am Main, Deutschland DA - 2013-11-21 PY - 2013 AN - OPUS4-32671 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas A1 - Schlick-Hasper, Eva T1 - Leakproofness of Transport Packagings T2 - TransPack Forum CY - Orlando, Florida, USA DA - 2014-04-22 PY - 2014 AN - OPUS4-32672 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -