TY - JOUR A1 - Kalinka, Gerhard A1 - Boro, I. A1 - Augustin, G. A1 - Hampe, Andreas A1 - Hinrichsen, G. T1 - Ermüdungsverhalten von Hochleistungs-Faserverbundwerkstoffen mit thermoplastischer Matrix JF - Kunststoffe / Deutsche Ausgabe KW - Verbundwerkstoffe KW - Ermüdung KW - Biegeschwingung KW - Thermoplaste KW - Glasfaser PY - 1990 SN - 0023-5563 VL - 80 IS - 5 SP - 626 EP - 630 PB - Hanser CY - München AN - OPUS4-11996 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kalinka, Gerhard A1 - Boro, I. A1 - Augustin, G. A1 - Hampe, Andreas A1 - Hinrichsen, G. T1 - Fatigue Behaviour of High-Performance Fibre-Reinforced Composites with a Thermoplastic Matrix JF - Kunststoffe / German plastics KW - Verbundwerkstoffe KW - Ermüdung KW - Biegeschwingung KW - Thermoplaste KW - Glasfaser PY - 1990 SN - 0723-0192 VL - 80 IS - 5 SP - 36 EP - 38 PB - Hanser CY - Munich AN - OPUS4-11999 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schumacher, Gerhard A1 - Chen, Weiye A1 - Frohberg, G. A1 - Wahi, R. P. ED - Chandra, T. T1 - Evolution of microstructure and its effect on creep behavior of single crystal superalloy SC16 under creep fatigue loading T2 - International Conference on Processing & Manufacturing of Advanced Materials T2 - International Conference on Processing & Manufacturing of Advanced Materials - Processing, Fabrication, Properties, Applications ; THERMEC 2000 CY - Las Vegas, NV, USA DA - 2000-12-04 KW - Superalloy KW - Single crystal KW - SC16 KW - Creep fatigue KW - Rafting KW - Creep behavior PY - 2000 SN - 0-08-044026-6 PB - Elsevier Science AN - OPUS4-949 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schumacher, Gerhard A1 - Chen, S. H. A1 - Wahi, R. P. A1 - Mukherji, D. A1 - Frohberg, G. T1 - Deformation Substructures in a Near Gamma-TiAl Alloy With Duplex Microstructure JF - Journal of materials processing technology KW - Titanium Aluminides KW - Stacking faults KW - Faulted dipoles KW - Lattice parameters PY - 2000 SN - 0924-0136 SN - 1873-4774 SP - 1(?) EP - 6(?) PB - Elsevier CY - Amsterdam AN - OPUS4-950 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Becker, Gerhard Wilhelm A1 - Biedenkopf, G. T1 - Die Leistungen des VDI für Ingenieure JF - VDI-Nachrichten PY - 1980 SN - 0042-1758 VL - 34 IS - 44 SP - 45 EP - 46 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-9239 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kühn, Gerhard A1 - Weidner, Steffen A1 - Just, Ulrich A1 - Hohner, G. T1 - Characterization of technical waxes - Comparison of chromatographic techniques and matrix-assisted laser-desorption/ionization mass spectrometry JF - Journal of chromatography A N2 - Technical waxes and paraffins were investigated using supercritical fluid chromatography (SFC), matrix-assisted laser-desorption/ionization mass spectrometry (MALDI-MS) and size-exclusion chromatography (SEC). SEC enables the simultaneous determination of molecular masses up to high values and molecular mass distributions. The resolution of homologous species, however, is poor. In this respect the use of SFC is advantageous. Proper resolution of homologues may be provided up to Mr~1200 without great difficulty. To compare these chromatographic results MALDI-MS was applied for the determination of molecular masses and mass distributions in technical waxes for the first time. Using reflectron mode excellent MALDI mass spectra could be achieved in the molecular mass range up to 1000 Da. The mean values of the molecular masses calculated by MALDI-MS were in sufficient agreement with those of SFC. In the linear mode of MALDI-MS molecular masses could be determined to nearly 3000 Da. Beyond this mass range SEC still remains the method of choice. Advantages and difficulties of the used methods are discussed in this paper. PY - 1996 DO - https://doi.org/10.1016/0021-9673(95)01255-9 SN - 0021-9673 VL - 732 IS - 1 SP - 111 EP - 117 PB - Elsevier CY - Amsterdam AN - OPUS4-11347 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hinrichs, V. A1 - Kalinka, Gerhard A1 - Hinrichsen, G. T1 - An Avrami-based model for the description of the secondary crystallization of polymers JF - Journal of macromolecular science B N2 - A mathematical model for the description of the overall crystallization of polymers has been developed which separates the pure geometric spreading of the semicrystalline superstructures from the increasing crystallinity inside these entities. The model uses the Avrami theory for the geometric part and a freely optional function for the increasing local crystallinity. The two functions are combined by a mathematical procedure called convolution. The free option of the local crystallinity function enables this model to permit calculation of this function, which is not accessible to direct measurement. Thus with given Avrami parameters and measured values of the time-dependent overall crystallinity, this function of the local crystallinity (secondary crystallization function) can be calculated. The model has been applied to test data produced by computer simulations. KW - Thermoplaste KW - Kristallisation KW - Nachkristallisation KW - Sphärolithe KW - Kristallisationskinetik KW - Modellrechnung PY - 1996 DO - https://doi.org/10.1080/00222349608220382 SN - 0022-2348 SN - 1525-609X VL - 35 IS - 3-4 SP - 295 EP - 302 PB - Dekker Chemistry CY - New York, NY AN - OPUS4-11983 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Auer, C. A1 - Kalinka, Gerhard A1 - Krause, T. A1 - Hinrichsen, G. T1 - Crystallization Kinetics of Pure and Fiber-Reinforced Poly(phenylene Sulfide) JF - Journal of applied polymer science KW - Verbundwerkstoffe KW - Thermoplaste KW - Kristallisation KW - Kristallisationskinetik KW - Erstarrung KW - Avrami KW - Modellrechnung KW - Simulation PY - 1994 SN - 0021-8995 SN - 1097-4628 VL - 51 SP - 407 EP - 413 PB - Wiley InterScience CY - Hoboken, NJ AN - OPUS4-11991 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Krause, T. A1 - Kalinka, Gerhard A1 - Auer, C. A1 - Hinrichsen, G. T1 - Computer Simulation of Crystallization Kinetics in FIber-Reinforced Composites JF - Journal of applied polymer science KW - Verbundwerkstoffe KW - Thermoplaste KW - Kristallisation KW - Kristallisationskinetik KW - Erstarrung KW - Avrami KW - Modellrechnung KW - Simulation PY - 1994 SN - 0021-8995 SN - 1097-4628 VL - 51 SP - 399 EP - 406 PB - Wiley InterScience CY - Hoboken, NJ AN - OPUS4-11992 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Nowak, H. A1 - Kalinka, Gerhard A1 - Hinrichsen, G. T1 - Investigations on the cold crystallization of pure and filled PETP by dielectric measurements JF - Acta polymerica N2 - The cold crystallization of pure and filled poly(ethylene terephthalate) (PETP) after quenching from the melt has been investigated by dielectric measurements in two different modes: The first one using constant heating-rate (in the temperature range from 320 to 480 K) and the second one under isothermal conditions (at 378 K). The complex dielectric constant (ε´, tan δ) is influenced by crystallization. Two α-relaxation regions are identified: The αa-relaxation region from the pure amorphous phase and the α´-relaxation region from the spherulitic phase. The investigations on the filled systems (PETP + 10% aramid puple, PETP + 30% short glass fibres) prove that an influence of the fillers on the time delay and rate of crystallization and on the geometry of the growing spherulites exists. KW - Verbundwerkstoffe KW - Gefüllte Kunststoffe KW - Elektrische Eigenschaften KW - Verlustfaktor KW - Dielektrische Analyse PY - 1993 SN - 0323-7648 SN - 1521-4044 VL - 44 IS - 1 SP - 25 EP - 28 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-11995 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -