TY - RPRT A1 - Bedon, C. A1 - C., K. A1 - van Doormaal, A. A1 - Haberacker, C. A1 - Hüsken, Götz A1 - Larcher, M. A1 - Saarenheimo, A. A1 - Solomos, G. A1 - Stolz, A. A1 - Thamie, L. A1 - Valsamos, G. T1 - A comparison of existing standards for testing blast resistant glazing and windows N2 - It is important to protect critical buildings (shopping centres, government buildings and embassies), infrastructure and utilities, train and underground stations against being damaged, destroyed or disrupted by deliberate acts of terrorism, criminal activity and malicious behaviour. Normal regulations and building guidelines do not generally take into account these threats. The introduction of appropriate regulations or guidelines, where deemed necessary, should enhance the resilience of buildings and infrastructure against explosion incidents. In order to protect the built infrastructure, methods are required to quantify the resistance of structural components against explosive loading and to assess the hazards resulting from the failure of an element. The applicable state-of-the-art techniques may include either experimental or numerical methods, or a combination of both. Therefore, the thematic group (TG) on the resistance of structures to explosion effects was formed in order to bring the required expertise together, make it commonly available and to find and define harmonised methods and solutions which can be provided to the decision-makers responsible for critical infrastructure protection. This report discusses the differences between the existing standards for testing blast-resistant glazing and windows and it presents basic recommendations for the future development of the suite of European standards in this area. KW - Building industry KW - Accident prevention KW - Glass industry KW - Explosive KW - Industrial infrastructure KW - Risk prevention KW - Urban infrastructure KW - Terrorism KW - Safety standard KW - Technical standard KW - Research report PY - 2014 SN - 978-92-79-46168-2 U6 - https://doi.org/10.2788/361383 SN - 1831-9424 VL - JRC94930 SP - 1 EP - 42 AN - OPUS4-36904 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weise, Frank A1 - Hüsken, Götz A1 - Niedack-Nad, Marianne A1 - Wieland, M. T1 - AL Sp-Beton - Präzision des Prüfverfahrens N2 - Für die rechnerische Dimensionierung der Betondecken im Oberbau von Verkehrsflächen für den Neubau sowie die Erneuerung nach RDO-Beton 09 ist die statische Spaltzugfestigkeit an der unteren bzw. unteren und oberen Scheibe des Betonzylinders bzw. Bohrkerns entsprechend der Vorgaben der AL Sp-Beton zu bestimmen. Aufgrund der unzureichenden Kenntnis der Präzision dieses Prüfverfahrens wurden mit einem breit aufgestellten Ringversuch die statistischen Kennwerte an Labor- und Bestandsbetonen unter Vergleich- und Wiederholbedingungen auf der Grundlage des FGSV-Merkblatts über die statistische Auswertung von Prüfergebnissen ermittelt. Für eine möglichst gute statistische Absicherung nahmen an dem Ringversuch dreizehn erfahrene Prüfstellen teil. Zur Abdeckung des vielschichtigen Einsatzes des Prüfverfahrens erfolgte der Ringversuch an acht Prüflosen. Dabei berücksichtigen einerseits die Prüflose 1 und 2 mit den im Transportbetonwerk hergestellten Betonzylindern die Erst-/Eignungsprüfung und das darauf aufbauende Prüflos 3 mit Bohrkernen aus einer im Feldversuch hergestellten Fahrbahnplatte mit gleicher Betonrezeptur die Übereinstimmungskontrolle bei Neubaumaßnahmen. Andererseits findet der Einsatz des Prüfverfahrens bei der Restsubstanzbewertung von Betonfahrbahnplatten bei den Prüflosen 4 bis 7 mit den Bohrkernen aus vier in Waschbetonbauweise ausgeführten Fahrbahnplatten Berücksichtigung. Das zusätzlich aufgenommene Prüflos 8 mit einem Labormörtel dient der Herausarbeitung des Materialeinflusses auf die Präzision der Spaltzugfestigkeitsprüfung. Zusammenfassend kann festgestellt werden, dass die Präzision der in der AL SP-Beton beschriebenen Spaltzugfestigkeitsprüfung mit einem Variationskoeffizienten von weniger als 10 % unter Wiederhol- und Vergleichsbedingungen hinreichend genau ist. Der geringe Unterschied zwischen den Variationskoeffizienten unter Wiederhol- und Vergleichsbedingungen lässt zusätzlich den Schluss zu, dass der Einfluss des unterschiedlichen Personals und der verschiedenartigen Prüftechniken bei den einzelnen Prüfstellen relativ gering ist. Die im Rahmen des Ringversuchs gewonnenen Erkenntnisse haben bereits partiell Eingang in die Normung gefunden. KW - Betonfahrbahndecken KW - Spaltzugfestigkeit KW - Ringversuch KW - Verfahrenspräzision PY - 2014 SN - 0039-2162 VL - 66 IS - 10 SP - 790 EP - 798 PB - Kirschbaum-Verl. CY - Bonn-Bad Godesberg AN - OPUS4-32066 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Frost, Daniel A1 - Hüsken, Götz A1 - Weise, Frank A1 - Berger, J. ED - Domnick, I. ED - Heimann, S. T1 - Analyse von Schädigungsprozessen statischer und dynamischer Spaltzugversuche unter Verwendung innovativer Prüftechnik N2 - Im Rahmen einer Bachelorarbeit und in Kooperation mit der Bundesanstalt für Materialforschung und -prüfung (BAM) wurden die eintretenden Schädigungsprozesse während des Spaltzugversuche mittels innovativer Prüfverfahren untersucht. Ziel war es, in Untersuchungen Erkenntnisse über das Versagensverhalten unter statischer und dynamischer Spaltzugbeanspruchung bei der Variation verschiedener Einflussfaktoren zu gewinnen. Hierfür wurde die Aussagekraft innerer und äußerer Schädigungsindikatoren zur Charakterisierung der auftretenden Bruchmechanismen analysiert. KW - Spaltzugfestigkeit KW - RDO - Beton KW - Innovative Prüftechniken KW - Bruchmechanismus PY - 2014 SN - 978-3-8440-2643-6 SN - 2191-740X N1 - Serientitel: Forum Geo-Bau – Series title: Forum Geo-Bau VL - 4 SP - 89 EP - 96 PB - Shaker AN - OPUS4-31221 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ünal, Murat A1 - Hüsken, Götz A1 - Kühne, Hans-Carsten T1 - Betonkorrosion und Betoninstandsetzung vor dem Hintergrund der DIN EN 1504 T2 - Bauen im Bestand CY - Northeim DA - 2014-11-20 PY - 2014 AN - OPUS4-32423 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hüsken, Götz A1 - Ünal, Murat A1 - Kühne, Hans-Carsten T1 - Betonkorrosion und Betoninstandsetzung vor dem Hintergrund der DIN EN 1504 T2 - Bauen im Bestand CY - Rendsburg DA - 2014-11-06 PY - 2014 AN - OPUS4-32424 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Nery de Araújo Neto, Gilberto A1 - Hüsken, Götz A1 - Kühne, Hans-Carsten ED - Grantham, Michael ED - Basheer, P. A. Muhammed ED - Magee, Bryan ED - Soutsos, Marios T1 - Design of a cementitious coating system for corrosion protection: Phase 1 binder materials selection N2 - This paper presents the first results of an ongoing research project on the development of a cementitious thin layer coating system with high resistance against chloride penetration and carbonation. It is intended to display the decision process used for selecting raw materials as well as the conclusions based on test results and theoretical deliberations. In this phase, only the influence of the binder materials was analyzed concerning mechanical properties. The system should enhance the durability of new and old concrete structures exposed to aggressive environments, be based on market available materials and fulfill the requirements of the German guideline for concrete repair (Rili-SIB). T2 - Concrete Solutions 5th International Conference on Concrete Repair CY - Queen’s University Belfast, Northern Ireland, UK DA - 01.09.2014 KW - Concrete repair KW - Durability KW - Chloride penetration KW - Carbonation PY - 2014 SN - 978-1-138-02708-4 SN - 978-1-315-73731-7 U6 - https://doi.org/10.1201/b17394-66 SP - Chapter 60, 423 EP - 429 PB - CRC Press AN - OPUS4-40114 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - C., K. A1 - van Doormaal, A. A1 - Haberacker, C. A1 - Hüsken, Götz A1 - Larcher, M. A1 - Saarenheimo, A. A1 - Solomos, G. A1 - Stolz, A. A1 - Thamie, L. A1 - Bedon, C. T1 - Numerical simulations for classification of blast loaded laminated glass: possibilities, limitations and recommendations N2 - It is important to protect critical buildings (shopping centres, government buildings and embassies), infrastructure and utilities, train and underground stations against being damaged, destroyed or disrupted by deliberate acts of terrorism, criminal activity and malicious behaviour. Normal regulations and building guidelines do not generally take into account these threats. The introduction of appropriate regulations or guidelines, where deemed necessary, should, enhance the resilience of buildings and infrastructure against explosion incidents. In order to protect the built infrastructure, methods are required to quantify the resistance of structural components against explosive loading and to assess the hazards resulting from the failure of an element. The applicable state-of-the-art techniques may include either experimental or numerical methods, or a combination of both. Therefore, the thematic group (TG) on the resistance of structures to explosion effects was formed in order to bring the required expertise together, make it commonly available and to find and define harmonised methods and solutions which can be provided to the decision-makers responsible for critical infrastructure protection. The current report summarizes existing best practices for the numerical finite element modelling of blast loading, including the important topics of domain discretisation, implicit/explicit formulation, Lagrangian/Eulerian solvers, the mathematical description of the material behaviour etc. Furthermore recommendations for the modelling of laminated glass elements are formulated and knowledge gaps in this application area are pointed out. Hence the report builds the basis for an actual evaluation of the different numerical methods, their suitability to certain problems, and their capability to support/complement the experimental testing of glass components. It thus provides helpful information to design architects and engineers, and more generally to critical infrastructure stakeholders, responsible for the structural integrity and security of the infrastructure in case of an explosion. KW - building industry KW - explosive KW - accident prevention KW - glass industry KW - industrial infrastructure KW - risk prevention KW - urban infrastructure KW - terrorism KW - technical standard KW - research report PY - 2014 SN - 978-92-79-46172-9 U6 - https://doi.org/doi:10.2788/083832 SN - 1831-9424 SP - 1 EP - 39 AN - OPUS4-36908 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Quercia, G. A1 - Spiesz, P. A1 - Hüsken, Götz A1 - Brouwers, H.J.H. T1 - SCC modification by use of amorphous nano-silica N2 - In this study two different types of nano-silica (nS) were applied in self-compacting concrete (SCC), both having similar particle size distributions (PSD), but produced through two different processes: fumed powder silica and precipitated silica in colloidal suspension. The influence of nano-silica on SCC was investigated with respect to the properties of concrete in fresh (workability) and hardened state (mechanical properties and durability). Additionally, the densification of the microstructure of the hardened concrete was verified by SEM and EDS analyses. The obtained results demonstrate that nano-silica efficiently used in SCC can improve its mechanical properties and durability. Considering the reactivity of the two applied nano-silicas, the colloidal type showed a higher reactivity at early age, which influenced the final SCC properties. KW - Nano-silica KW - Self compacting concrete KW - Durability KW - Chloride KW - Freeze-thaw PY - 2014 U6 - https://doi.org/10.1016/j.cemconcomp.2013.09.001 SN - 0958-9465 SN - 1873-393X VL - 45 SP - 69 EP - 81 PB - Elsevier CY - Barking, Essex AN - OPUS4-30385 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Viefhues, Eva A1 - Ünal, Murat A1 - Hüsken, Götz A1 - Wellershoff, F. A1 - Mehdianpour, Milad T1 - Zementgebundenes Crashmaterial für Schutzbauteile in explosionsbeanspruchten Fassaden N2 - Die Forderung, für repräsentative Bauwerke wie Botschaften und Flughäfen auch außergewöhnliche Lasten aus Explosion zu berücksichtigen, wurde in jüngerer Vergangenheit zunehmend gestellt. Das aufgrund dieser Lasten zu erwartende Schadensausmaß kann durch den Einsatz von energiedissipierenden Schutzbauteilen in der Fassadenbefestigung begrenzt werden. Die Dissipation der Explosionsenergie in den Schutzbauteilen kann beispielsweise über ein Crashmaterial erfolgen. In diesem Aufsatz werden Untersuchungen an zementgebundenen Materialien, die diesem Zweck dienen sollen, vorgestellt. Der Einfluss unterschiedlicher Zusätze auf die für ein Crashmaterial maßgebenden Eigenschaften wird in einer Parameterstudie untersucht. Als besonders geeignet wird ein Material identifiziert, bei dem die Zugabe eines Gasbildners das Matrixgefüge im Hinblick auf das gewünschte Kraft-Verformungs-Verhalten positiv verändert. Dynamische Versuche mit diesem Material geben Aufschluss über dessen Komprimierungsverhalten bei hohen Stauchraten.----------------------------------------------------------------------------------------------------------------------------------------------- In the past few years public awareness of the need to protect structures against blast effects has risen. Energy dissipating protective components placed at the façade connectors allow protecting people in the building as well as the primary building structure from damage due to blast loads. One possibility to dissipate the blast energy is using protective components with crash material. This paper presents tests on cementitious crash materials studying the effect of different additives to the compression-behavior of the material. Additional experiments enable analyzing the material behavior under static and dynamic test conditions. KW - Explosionsbeanspruchung KW - Energiedissipation KW - Fassadenverankerung KW - Materialkennlinie KW - Crashmaterial KW - Crashkörper KW - Energy dissipation KW - Façade connector KW - Material behavior KW - Crash-material KW - Entwurf und Konstruktion KW - Baustoffe KW - Building materials KW - Conception and design KW - Blast loads PY - 2014 U6 - https://doi.org/10.1002/bate.201400041 SN - 0932-8351 SN - 1437-0999 SN - 0005-6820 SN - 0341-1052 SN - 0932-6359 SN - 0932-8351 VL - 91 IS - 8 SP - 567 EP - 571 PB - Ernst & Sohn CY - Berlin AN - OPUS4-31343 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -