TY - CHAP A1 - Mix, Renate A1 - Yin, Huajie A1 - Friedrich, Jörg Florian ED - Gutowski, W. ED - Dodiuk, H. T1 - Aerosol-based DBD - A simple way to provide polymers with functional groups for adhesion promotion N2 - Polypropylene (PP) foils were exposed to the plasma of an atmospheric dielectric barrier discharge (DBD) in presence of different aerosols. Pure liquids such as water, ethanol, and 1/1 mixtures ethanol/water (v/v) or aqueous Solutions of acetic acid, poly(acrylic acid), poly(vinyl alcohol), and ethylene glycolpoly(vinyl alcohol) copolymer were introduced into the DBD. Surface composition, the number of functional groups per 100 C atoms, and water contact angles were correlated with the energy density of DBD plasma exposure. The wettability of the treated surfaces was investigated for different storage times. Peel strength of the thermally deposited aluminum layer to modified polymer surfaces revealed that the aerosol introduction strongly improves the adhesion between aluminum and polypropylene. KW - Aerosol-assisted DBD KW - Functional groups KW - Surface modification PY - 2013 SN - 978-90-04-20173-6 SN - 978-90-04-20174-3 SP - Chapter 8, 155 EP - 170 PB - CRC Press AN - OPUS4-30035 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Zeynalov, Eldar A1 - Wagner, M. A1 - Friedrich, Jörg Florian A1 - Magerramova, M. A1 - Salmanova, N. A1 - Hidde, Gundula A1 - Meyer-Plath, A. T1 - The peculiar behavior of functionalized carbon nanotubes in hydrocarbons and polymeric oxidation environments N2 - It has been shown that selected types of substituents are able to vary the oxidative behavior of multi-walled carbon nanotubes. Such substituents investigated were sterically hindered secondary amino groups bonded in grafted piperidine units and covalently bonded bromine groups. Their interference and activity was preliminary determined in the model cumene and then in oil diesel fraction and low density polyethylene oxidation reactions. Results obtained indicate that chemical linking of amine moieties containing –NH groups directly to the carbon nanotubes core significantly increases their intrinsic anti-oxidative capacity while the grafting of Br-groups provokes the opposite functioning of the pristine samples. This inference was proved by thermogravimetric and differential thermal analysis of the polyethylene composites and experiments on profound aerobic oxidation of petroleum naphthenic fraction derived from the commercial Baku oils blend diesel cut. KW - Multi-walled carbon nanotubes KW - Amine derivatives KW - Plasma-chemical technique KW - Brominated carbon nanotubes KW - Rate of model oxidation KW - Anti-oxidative efficiency KW - Catalytic activity KW - Inhibition rate constant KW - Photoelectron spectroscopy KW - Oxidation KW - Polyethylene composites KW - Oil diesel fraction PY - 2016 DO - https://doi.org/10.1080/01694243.2016.1239304 SN - 0169-4243 SN - 1568-5616 VL - 31 IS - 9 SP - 988 EP - 1006 AN - OPUS4-39894 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mix, Renate A1 - Friedrich, Jörg Florian T1 - Adhesion promotion in metal-polymer composites by introduction of functional groups arranged in a well-defined distance to the polymer surface by spacer incorporation T2 - 10th International Conference on the Science and Technology of Adhesion and Adhesives, Euradh 2008 - Adhesion `08 CY - Oxford, UK DA - 2008-09-03 KW - Adhesion KW - Aluminium KW - Polypropylene KW - Plasma polymers KW - Spacer-bonded functional groups PY - 2008 SP - 447 EP - 451 PB - IOM Communications CY - London AN - OPUS4-18616 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Friedrich, Jörg Florian A1 - Mix, Renate A1 - Wettmarshausen, Sascha T1 - A new concept for adhesion promotion in metal-polymer systems by introduction of covalently bonded spacers at the interface N2 - A new concept for molecular interface design in metal-polymer systems is presented. The main features of this concept are the replacement of weak physical interactions by strong covalent bonds, the flexibilization of the interface for compensating different thermal expansions of materials by using long-chain flexible and covalently bonded spacers between the metal and the polymer as well as its design as a moisture-repellent structure for hindering diffusion of water molecules into the interface and hydrolysis of chemical bonds. For this purpose, the main task was to develop plasmachemical and chemical techniques for equipping polymer surfaces with monotype functional groups of adjustable concentration. The establishing of monotype functional groups allows grafting the functional groups by spacer molecules by applying usual wet-chemical reactions. Four processes were favoured for production of monotype functional groups by highly selective reactions: the plasma bromination, the plasma deposition of plasma polymers, the post-plasma chemical reduction of O-functionalities to OH-groups, and the chemical replacement of bromine groups by NH2-groups. The grafting of flexible organic molecules as spacers between the metal layer and polymer improved the peel strength of the metal. To obtain maximal peel strength of aluminium coatings to polypropylene films and occurrence of cohesive failure in the polypropylene substrate, about 27 OH groups per 100 C-atoms or 6 COOH groups per 100 C-atoms were needed. Introducing C6-11-aliphatic spacers 1 OH or COOH group per 100 C-atoms contributed about 60% of the maximal peel strength of the Al-PP system, i.e. 2 or 3 spacer molecules per 100 C-atoms were sufficient for maximal peel strength. KW - Polymer surface functionalization KW - Spacer grafting KW - Metal-polymer adhesion PY - 2008 DO - https://doi.org/10.1163/156856108X309611 SN - 0169-4243 SN - 1568-5616 VL - 22 IS - 10-11 SP - 1123 EP - 1143 PB - VNU Science Press CY - Utrecht AN - OPUS4-17741 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Friedrich, Jörg Florian A1 - Mix, Renate A1 - Schulze, Rolf-Dieter A1 - Meyer-Plath, Asmus A1 - Joshi, Ranjit A1 - Wettmarshausen, Sascha T1 - New Plasma Techniques for Polymer Surface Modification with Monotype Functional Groups N2 - The production of chemically-defined plasma polymers and the introduction of monotype functional groups onto polymer surfaces are described. One method is to lower the energetic level of low-pressure plasmas. Pressure- and plasma-pulsed plasmas were successfully tested for the production of chemically-defined plasma polymers by increasing the monomer supply during the plasma-off period. Well-defined ultra-thin polymer films with regular structure were deposited from atmospheric plasmas by electrospray techniques. Post-plasma wet-chemical processing was also applied, as were gas/liquid-based aerosols and underwater plasmas. KW - Plasma KW - Polymer-Oberflächenfunktionalisierung KW - Macromolecular plasma KW - Monotype functional groups KW - Plasma bromination KW - Plasma treatment KW - Pressure-pulsed plasma KW - Underwater plasma PY - 2008 DO - https://doi.org/10.1002/ppap.200700145 SN - 1612-8850 SN - 1612-8869 VL - 5 IS - 5 SP - 407 EP - 423 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-17742 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Joshi, Ranjit A1 - Friedrich, Jörg Florian A1 - Wagner, M.H. T1 - Study of carboxylic functionalization of polypropylene surface using the underwater plasma technique N2 - Non-equilibrium solution plasma treatment of polymer surfaces in water offers the possibility of more dense and selective polymer surface functionalization in comparison to the well-known and frequently used low-pressure oxygen plasma. Functional groups are introduced when the polymer surface contacts the plasma moderated solution especially water solutions. The emission of ions, electrons, energy-rich neutrals and complexes, produced by the ion avalanche are limited by quenching, with the aid of the ambient water phase. The UV-radiation produced in plasma formation also helps to moderate the reaction solution further by producing additional excited, ionized/dissociated molecules. Thus, monotype functional groups equipped polymer surfaces, preferably OH groups, originating from the dissociated water molecules, could be produced more selectively. An interesting feature of the technique is its flexibility to use a wide variety of additives in the water phase. Another way to modify polymer surfaces is the deposition of plasma polymers carrying functional groups as carboxylic groups used in this work. Acetic acid, acrylic acid, maleic and itaconic acid were used as additive monomers. Acetic acid is not a chemically polymerizing monomer but it could polymerize by monomer/molecular fragmentation and recombination to a cross linked layer. The other monomers form preferably water-soluble polymers on a chemical way. Only the fragmented fraction of these monomers could form an insoluble coating by cross linking to substrate. The XPS analysis was used to track the alterations in -O-CO- bond percentage on the PP surface. To identify the -COOH groups on substrate surface unambiguously, which have survived the plasma polymerization process, the derivatization with trifluoroethanol was performed. KW - Polymeroberflächen KW - Funktionelle Gruppen PY - 2009 DO - https://doi.org/10.1140/epjd/e2009-00088-6 SN - 1434-6060 VL - 54 IS - 2 SP - 249 EP - 258 PB - Springer CY - Berlin AN - OPUS4-19607 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Friedrich, Jörg Florian A1 - Mix, Renate A1 - Schulze, Rolf-Dieter A1 - Rau, A. T1 - Ultra-thin polymer layer deposition by aerosol-dielectric barrier discharge (DBD) and electrospray ionization (ESI) at atmospheric pressure N2 - Polyolefins are chemically inert and do not adhere well to metals, polymers or inorganics. To overcome this problem, polyolefin surfaces were modified thermally, plasmachemically, or by flame treatment with different oxygen-containing groups, however, unfortunately, such treatments were accompanied by undesired, adhesion lowering polymer degradation. To solve this dilemma, solutions of synthetic polymers and copolymers were prepared, sprayed into the barrier discharge or electrosprayed without discharge and deposited as thin adhesion-promoting layers. The deposited polymer layers from poly(vinylamine), poly(ethylene glycol)-poly(vinyl alcohol) copolymers and poly(acrylic acid) were endowed with monotype functional groups. Using the aerosol - dielectric barrier discharge only a fraction of functional groups survived the deposition process in contrast to the electrospray in which all functional groups were retained. KW - Polymer surface modification KW - Dielectric barrier discharge KW - Polymer aerosols KW - Electrospray deposition KW - Adhesion-promoting layers PY - 2010 DO - https://doi.org/10.1163/016942409X12598231568429 SN - 0169-4243 SN - 1568-5616 VL - 24 IS - 7 SP - 1329 EP - 1350 PB - VNU Science Press CY - Utrecht AN - OPUS4-21374 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wettmarshausen, Sascha A1 - Mix, Renate A1 - Meyer-Plath, Asmus A1 - Mittmann, Hans-Ulrich A1 - Friedrich, Jörg Florian ED - K.L. Mittal, T1 - Plasma Bromination - a selective way to monotype functionalized polymer surfaces KW - Functional groups KW - Polymer surfaces KW - Plasma bromination KW - Grafting KW - Spacer KW - Selective plasma process PY - 2009 SN - 978-90-04-16590-8 VL - 5 SP - 3 EP - 18 PB - Koninklijke Brill NV CY - Leiden, The Netherlands AN - OPUS4-18944 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Joshi, Ranjit A1 - Schulze, Rolf-Dieter A1 - Meyer-Plath, Asmus A1 - Friedrich, Jörg Florian T1 - Selective surface modification of Poly(propylene) with OH and COOH groups using liquid-plasma systems N2 - Underwater plasma and glow discharge electrolysis are interesting new methods for polymer surface functionalization. The achievable content of O-containing functional groups exceeds that of oxygen glow discharge gas plasmas by a factor of two (up to ca. 56 O/100 C). The percentage of OH groups among all O-containing groups can reach 25 to 40%, whereas it is about 10% in the gas plasmas. Addition of hydrogen peroxide increases the fraction of OH groups to at most 70% (27 OH/100 C). The liquid plasma systems are also able to polymerize acrylic acid and deposit the polymer as very thin film on substrate surfaces or membranes, thereby retaining about 80% of all COOH functional groups (27 COOH/100 C). KW - Polymeroberflächen KW - Funktionelle Gruppen PY - 2008 DO - https://doi.org/10.1002/ppap.200700175 SN - 1612-8850 SN - 1612-8869 VL - 5 IS - 7 SP - 695 EP - 707 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-18884 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Friedrich, Jörg Florian T1 - Monosort functionalization of polymer surface as anchoring points for graft syntheses T2 - The Eleventh International Conference on Plasma Surface Engineering, PSE CY - Garmisch-Partenkirchen, Germany DA - 2009-09-15 PY - 2009 AN - OPUS4-18975 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Friedrich, Jörg Florian T1 - High selective polymer surface functionalization by using plasmas of Br-containing precursors with low ionization potential T2 - The Eleventh International Conference on Plasma Surface Engineering CY - Garmisch-Partenkirchen, Germany DA - 2009-09-15 PY - 2009 AN - OPUS4-18977 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Friedrich, Jörg Florian T1 - New Plasmas for Polymer Surface Functionalization T2 - Vortrag an der Karls-Universität Prag CY - Prague, Czech Republic DA - 2008-01-28 PY - 2008 AN - OPUS4-18978 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Friedrich, Jörg Florian T1 - Selective Surface Modification of Polypropylene using Underwater Plasma Technique T2 - The Eleventh International Conference on Plasma Surface Engineering CY - Garmisch-Partenkirchen, Germany DA - 2009-09-15 PY - 2009 AN - OPUS4-18979 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Friedrich, Jörg Florian T1 - Monosort functionalization of polymer surface as anchoring points for graft synthesis T2 - XVI. Erfahrungsaustausch "Oberflächentechnologie mit Plasma- und Ionenstrahlprozessen" CY - Klingenthal, Germany DA - 2009-03-10 PY - 2009 AN - OPUS4-18980 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Friedrich, Jörg Florian T1 - Chemische Aspekte der Haftung von Metallen auf Polymeren T2 - Workshop Polymerhaftung und Reibung, TU München/Garching CY - Munich, Germany DA - 2008-10-10 PY - 2008 AN - OPUS4-18981 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Friedrich, Jörg Florian T1 - Polymer Surface Modification by Aerosol Based Corona Treatment of Foils T2 - Eleventh International Conference on Polymer Surface Engineering CY - Garmisch-Partenkirchen, Germany DA - 2008-09-15 PY - 2008 AN - OPUS4-18982 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -