TY - CONF A1 - Akkerman, Floris T1 - Aktuelle Entwicklungen zum EVPG T2 - AK Richtlinienkonformes Design CY - Berlin, Germany DA - 2012-03-13 PY - 2012 AN - OPUS4-27504 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Akkerman, Floris T1 - Ökodesignrichtlinie - erste Erfahrungen zur nationalen und europäischen Koordination T2 - Erfahrungsaustausch Marktüberwachung CY - Berlin, Germany DA - 2012-06-14 PY - 2012 AN - OPUS4-27505 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Akkerman, Floris T1 - Ökodesign und Energieverbrauchskennzeichnung T2 - BAM-Kolloquium CY - Berlin, Germany DA - 2012-08-22 PY - 2012 AN - OPUS4-27506 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Akkerman, Floris T1 - Energy Labelling in the European Union anad requirements und der Energy Community Treaty T2 - Labelling Seminar CY - Kiev, Ukraine DA - 2012-10-25 PY - 2012 AN - OPUS4-27507 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Akkerman, Floris T1 - Marktüberwachung für Ökodesign - Herausforderungen bei Industrieprodukten N2 - Die Ökodesignrichtlinie setzt einen Rahmen für vielfältige Anforderungen an Produkte. Ziel ist die Verringerung der Umweltauswirkungen über den gesamten Produktlebenszyklus. Dazu werden die vorgeschlagenen Produkte in Gruppen eingeteilt, Markt, Technik, Nutzerverhalten und bestehende Regelungen werden nach einer festen Methode ermittelt und Verbesserungspotenziale werfen identifiziert. Anhand von Szenarien, die das Vorgehen „weiter wie bisher" (BAU, business as usual) mit den Auswirkungen einer möglichen gesetzlichen Regelung vergleichen, wird eingeschätzt, ob eine solche Anforderung sinnvoll und lohnend ist. Die Entscheidung darüber, welche Regeln letztendlich gelten, trifft die EU-Kommission zusammen mit den Mitgliedsstaaten (Komitologieverfahren). Am Ende des Prozesses steht eine Verordnung der Kommission mit bindenden Mindestanforderungen für eine Produktkategorie. T2 - 11. Technischer Tag VEM CY - Wernigerode, Germany DA - 25.09.2012 KW - Energieeffizienz KW - Investitionsgüter KW - Marktüberwachung KW - Ökodesign PY - 2012 SP - 1 EP - 2 AN - OPUS4-27576 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Akkerman, Floris T1 - Die Ökodesign-Richtlinie - geltendes Recht und neue Entwicklungen N2 - Überblick zur Ökodesignrichtlinie und zur Energieverbrauchskennzeichnung mit den Schwerpunkten Elektromotoren und Ressourceneffizienzanforderungen. T2 - Umwelt-Workshop der IHK Reutlingen CY - Reutlingen, Baden-Wuerttemberg, Germany DA - 09.09.2019 KW - Ökodesign KW - Energieeffizienz KW - Ressourceneffizienz PY - 2019 AN - OPUS4-48904 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Akkerman, Floris T1 - Ökodesign und EnvK - Entwicklung, geltendes Recht und Ausblick - Schwerpunkt Haushaltsgeräte N2 - Folien zum Vortrag beim HEA-Fachausschuss effiziente Haushaltsgeräte zu den Themen Ökodesign und EnVK T2 - Sitzung des Fachausschusses effiziente Haushaltsgeräte der HEA CY - Berlin, Germany DA - 16.10.2019 KW - Energieverbrauchskennzeichnung KW - Energieeffizeinz KW - Ökodesign KW - Ressourceneffizienz PY - 2019 AN - OPUS4-49370 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Akkerman, Floris T1 - Ökodesign und EnvK - Entwicklung, geltendes Recht und Ausblick - Schwerpunkt Gebäudetechnik N2 - Folien zum Vortrag beim HEA-Fachausschuss FA Effiziente Gebäudeenergieversorgung, HEA T2 - Sitzung des Fachausschusses effiziente Gebäudeenergieversorgung, HEA CY - Berlin, Germany DA - 16.10.2019 KW - Energieverbrauchskennzeichnung KW - Energieeffizeinz KW - Ökodesign KW - Ressourceneffizienz PY - 2019 AN - OPUS4-49373 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Akkerman, Floris T1 - One step back, two steps forward - resource efficiency requirements within ecodesign N2 - Resource efficiency is a much discussed topic in terms of improving the sustainability of energy related and energy non-related products. Resource efficiency aspects such as the availability of spare parts, the ability to dismantle, etc. have been included in draft working documents in the revision of several already existing Ecodesign regulations as a first step. However, often these aspects are not consistent with the current technology and design of these products. A possible reason could be a lack of sufficient consultation or of a methodology which is sufficiently tailored for this topic. The established strategies and tools, used by policymakers, such as the Methodology for the Ecodesign of Energy-related Products (MEErP), do not seem to deal with these aspects appropriately. Draft requirements need to be very well developed before being discussed with member states and other related stakeholders, because including resource efficiency parameters could lead to additional, very wide-ranging effects on society. This topic cannot be covered well with legislative tools developed primarily for energy aspects. In this paper, a method is presented which can be used to combine products’ properties with crucial resource efficiency indicators. The method can be used to develop a set of draft legislative requirements and to pre-evaluate these requirements by target groups which would be affected by additional legal requirements. These include: market surveillance authorities, standardization organizations, manufacturers and their associations, environmental organizations and research facilities. The method incorporates stakeholders’ feedback to identify potential resource efficiency measures for materials and/or products, their impact on the European ecology, economy and society. Based on this it would help to develop legislative requirements which are feasible and desirable. The results can then be fed into the formal legislative process, probably speeding it up. T2 - ECEEE 2019 Summer Study on Energy Efficiency CY - Belambra Presqu'île de Giens, France DA - 03.06.2019 KW - Circular economy KW - Ecodesign KW - Energy policy KW - Resources PY - 2019 AN - OPUS4-48427 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlegel, Moritz-Caspar A1 - Akkerman, Floris T1 - One step back, two steps forward – Resource efficiency requirements within ecodesign N2 - Resource efficiency is a much discussed topic in terms of improving the sustainability of energy related and energy non-related products. Resource efficiency aspects such as the availability of spare parts, the ability to dismantle, etc. have been included in draft working documents in the revision of several already existing Ecodesign regulations as a first step. However, often these aspects are not consistent with the current technology and design of these products. A possible reason could be a lack of sufficient consultation or of a methodology which is sufficiently tailored for this topic. The established strategies and tools, used by policymakers, such as the Methodology for the Ecodesign of Energy-related Products (MEErP), do not seem to deal with these aspects appropriately. Draft requirements need to be very well developed before being discussed with member states and other related stakeholders, because including resource efficiency parameters could lead to additional, very wide-ranging effects on society. This topic cannot be covered well with legislative tools developed primarily for energy aspects. In this paper, a method is presented which can be used to combine products’ properties with crucial resource efficiency indicators. The method can be used to develop a set of draft legislative requirements and to pre-evaluate these requirements by target groups which would be affected by additional legal requirements. These include: market surveillance authorities, standardization organizations, manufacturers and their associations, environmental organizations and research facilities. The method incorporates stakeholders’ feedback to identify potential resource efficiency measures for materials and/or products, their impact on the European ecology, economy and society. Based on this it would help to develop legislative requirements which are feasible and desirable. The results can then be fed into the formal legislative process, probably speeding it up. T2 - ECEEE 2019 Summer Study on Energy Efficiency CY - Belambra Presqu'île de Giens, France DA - 03.06.2019 KW - Resources KW - Circular economy KW - Ecodesign KW - Energy policy PY - 2019 UR - https://www.eceee.org/library/conference_proceedings/eceee_Summer_Studies/2019/ SN - 978-91-983878-5-8 SN - 2001-7960 VL - 2019 SP - 1553 EP - 1562 AN - OPUS4-48341 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weimann, Karin A1 - Akkerman, Floris T1 - Die Ökodesignrichtlinie und ihre Auswirkungen auf Ventilatoren KW - Energiebetriebene-Produkte-Gesetz (EBPG) PY - 2009 SN - 1436-686X VL - 63 IS - 7-8 SP - 50 EP - 53 PB - Huss-Medien GmbH CY - Berlin AN - OPUS4-23055 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -