TY - CONF A1 - Fellinger, Tim-Patrick T1 - Bioinspired atomically dispersed M-N-C catalysts via active-site imprinting into nitrogen doped carbons N2 - Proton-exchange membrane fuel cells are amongst the most promising energy conversion technologies today. Herein non-precious iron-coordinated nitrogen doped carbons (Fe-N-Cs) are very promising alternatives for Pt-based cathode catalysts.[1-3] The early reports on the application of such materials date back to the 1960´s when Jasinski demonstrated that - similar to natural porphyrins - N-coordinated transition metal complexes can be active sites for the ORR.[3] The preparation of these catalysts was strongly optimized over the years; still they typically remain with harsh reaction conditions that complicate the selective formation of active FeN4 sites. The employment of pyrolytic temperatures has been a dogma for the synthesis of MN4 sites, however coming with unfavorable side reactions. We recently introduced a mild procedure, which is conservative toward the carbon support and leads to active-site formation at low temperatures in a wet-chemical step, essentially decoupling the preparation of nitrogen doped carbons (NCs) from the preparation of the active sites.[4, 5] The key concept therein is the so-called active site imprinting into the NC using the less reactive template ions Mg2+ [4] or Zn2+.[5] The presentation will introduce the concept of active site imprinting with a focus on Fe-N-C electrocatalyst development and testing. The broad potential of the synthetic approach will be exemplified by recent results, including the selective synthesis of tetrapyrrolic single site catalysts, the assignment of the role of the transition metal compared to the carbon scaffold and a facile method to evaluate specific activity. T2 - GDCh Electrochemistry 2022 CY - Berlin, Germany DA - 27.09.2022 KW - Bioinspired carbon catalysts PY - 2022 AN - OPUS4-61960 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Fellinger, Tim-Patrick T1 - Effects of Acid Activation via Sol-Gel Chemistry towards Nitrogen-Doped Carbon Structure N2 - Porous carbon materials are known for their applicability in important areas such as sorption, catalysis and electrochemistry (e.g. fuel cell catalysts, supercapacitor or battery electrodes). It was shown that nitrogen doped carbons (NDCs) act as an inexpensive and highly active non-metal catalyst in the oxygen reduction reaction (ORR), with the potential to reach performances of practical need one day. A key strategy towards improvement for this aim comprises the generation of advantageous porosity, which typically means high surface area and mass transport pores as well as the control over the chemistry of catalytically active sites. My group is developing novel sol-gel type strategies that are using molten salts or molten acids as unconventional reaction medium for the porogenesis in doped carbons, thereby revisiting classic activation techniques.[1,2] Carbon materials with extra high surface area of ~2800 m2 g- 1 and pore volumes, up to four times as high as in commercial activated carbons, are obtained.[3] It turns out that the meso- and macrostructure is generated by means of phase separation rather than leaching reactions. However, chemical reactions between the carbon precursor and the melt are also involved. The salt cations Mg2+ and Zn2+ act as template ions, which results in metal coordination sites, embedded into the carbon structure.[4,5] The imprinted structure may be utilized as catalytically active site by performing ion-exchange reactions. The novel preparation strategy towards highly active electrocatalysts will be presented for Mg and Zn and further discussed for lighter elements. T2 - International Sol-Gel Conference 2022 CY - Lyon, France DA - 24.06.2022 KW - Sol-Gel-Carbonization KW - Boron-Nitrogen-Doped Carbon PY - 2022 AN - OPUS4-61958 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mehmood, Asad A1 - Fellinger, Tim-Patrick T1 - Porous Carbon Supported Ni and Co Single Atom Catalysts for Electrochemical Reduction of Carbon Dioxide N2 - Non-precious metal single atom catalysts (generally labelled as M/NCs where M= Co, Fe, Ni etc.) consist of active metal centres dispersed on nitrogen doped porous carbon (NC) matrix at atomic level and exhibit promising activities e. g. for electrochemical reduction of CO2, selectively forming CO. We herein use identical Mg/NCs as platform for ion-exchange reactions towards morphologically equivalent Ni/NCs and Co/NCs. The Ni/NC catalyst shows almost double the specific activity and a Faraday efficiency of >80% at a very low overpotential of U= -0.43 V (even 95% at U= -0.5 to -0.8 V) with high stability. T2 - GDCh Electrochemistry 2022 CY - Berlin, Germany DA - 27.09.2022 KW - Electrochemical CO2 conversion KW - Single atom catalysts KW - Porous Carbons PY - 2022 AN - OPUS4-61980 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Appel, Paul Alexander A1 - Prinz, Carsten A1 - Low, Jian Liang A1 - Asres, Nahom Enkubahri A1 - Wu, Shu-Han A1 - Freytag, Annica A1 - Krug von Nidda, Jonas A1 - de Sousa Amadeu, Nader A1 - Fellinger, Tim-Patrick T1 - Kern–Schale: Versiegelung nanoporöser Partikel mit semipermeablen Kohlenstoffschichten befreit Hartkohlenstoffanoden von ihrem Dilemma N2 - In der vorliegenden Arbeit wird eine Kern-Schale-Strategie vorgestellt, die das grundlegende Problem gängiger nichtgraphitischer Hartkohlenstoff-Anoden adressiert: Hohe reversible Kapazitäten gehen bislang typischerweise mit erheblichen irreversiblen Verlusten in den ersten Zyklen einher. Analog zu Graphit, das sowohl Lithiumspeicherung als auch die Abtrennung von Elektrolytlösungsmitteln in einer homogenen Struktur vereint, zeigen wir, dass sich diese beiden Funktionen auch in nichtgraphitischen Kohlenstoffen gezielt in einer heterogenen Architektur kombinieren lassen. Hochporöse Aktivkohlen werden durch kinetisch kontrollierte Gasphasenabscheidung mit einer dünnen Schicht nichtgraphitischen Kohlenstoffs überzogen, sodass eine funktionale Kern-Schale-Struktur entsteht. Gasadsorptionsmessungen an Kern-, Schalen-, Kern-Schale- und mechanisch beschädigte Kern-Schale-Partikeln, bestätigen, dass die Porosität des Kerns erhalten bleibt und die Schale semipermeabel ist. Die Sorption von Diethylcarbonat wird als geeignetere Methode im Vergleich zu N2- oder CO2-Sorptionsmessungen eingeführt, um die irreversiblen Verluste des ersten Zyklus mit der tatsächlichen Flüssig-Fest-Grenzfläche von Kohlenstoffanoden zu verknüpfen. Die funktionalen Kern-Schale-Partikel zeigen eine stark reduzierte Aufnahme von Diethylcarbonat, was hohe reversible Kapazitäten bei deutlich geringeren Erstzyklusverlusten ermöglicht. Bei einer reversiblen Kapazität von 400 ± 24 mAh g−1 und einer initialen Coulombeffizienz von 82 ± 2% zeigt sich, dass die dreistufige Natriumspeicherung in der gezielt entwickelten Kern-Schale-Architektur den größeren Ionenradius von Natrium gegenüber Lithium (372 mAh g−1 in Graphit) kompensieren kann. Die entwickelten Kern-Schale-Anoden erreichen damit ein Leistungsniveau, das für eine kommerzielle Anwendung vielversprechend ist. KW - Kern-Schale-Struktur KW - Natriumionenbatterie KW - Hartkohlenstoffanode KW - Diethylcarbonatdampfsorption KW - Aktivkohle PY - 2026 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-655354 DO - https://doi.org/10.1002/ange.202519457 SN - 1521-3757 N1 - Es gibt eine parallele Sprachausgabe (englisch), ein Link befindet sich im Feld zugehöriger Identifikator - There is a parallel language edition (English), a link is in the field related identifier SP - 1 EP - 10 PB - Wiley-VCH CY - Weinheim AN - OPUS4-65535 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Appel, Paul Alexander A1 - Prinz, Carsten A1 - Low, Jian Liang A1 - Asres, Nahom Enkubahri A1 - Wu, Shu-Han A1 - Freytag, Annica A1 - Krug von Nidda, Jonas A1 - de Sousa Amadeu, Nader A1 - Fellinger, Tim-Patrick T1 - Core‐Shell: Resolving the Dilemma of Hard Carbon Anodes by Sealing Nanoporous Particles With Semi‐Permeable Coatings N2 - A core-shell strategy is introduced to overcome the dilemma of common non-graphitic hard carbon anodes, linking high reversible storage capacity to practically unacceptable irreversible losses in the first cycle(s). Just as Graphite homogeneously combines effective lithium storage with an electrolyte solvent-sieving function, we show that both of these functions could be strategically integrated into non-graphitic carbons in a heterogeneous structure. Highly porous activated carbons are sealed by kinetically tuned gas-phase deposition of non-graphitic carbon to form a functional core-shell structure. Gas sorption porosimetry on core, shell, core–shell, and cracked core-shell particles confirms preserved core porosity and a semi-permeable shell. Diethyl carbonate sorption analysis is introduced as a more suitable probe than N2 or CO2 sorption, linking first-cycle losses to the liquid–solid interface of carbon anodes. The functional core-shell particles with much reduced diethyl carbonate uptake allow for high storage capacity and reduced first cycle losses. Delivering 400 ± 24 mAh g−1 with 82 ± 2% first-cycle reversibility, it is shown that three-stage Na storage in designed core-shell anodes can compensate for the larger size of sodium compared to lithium stored in graphite anodes (372 mAh g−1). The designed core-shell anodes show state-of-the-art performance with commercial promise. KW - Sodium-ion battery KW - Activated carbon KW - Core-shell KW - Hard carbon anode KW - Diethyl carbonate vapor sorption PY - 2026 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-655346 DO - https://doi.org/10.1002/anie.202519457 SN - 1433-7851 N1 - Es gibt eine parallele Sprachausgabe (deutsch), ein Link befindet sich im Feld zugehöriger Identifikator - There is a parallel language edition (German), a link is in the field related identifier SP - 1 EP - 9 PB - Wiley-VCH CY - Weinheim AN - OPUS4-65534 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Fellinger, Tim-Patrick T1 - Batteries: Basics, Challenges and Trends N2 - In this lecture the fundamental principles of batteries are briefly introduced aligned by the historical development of the technology. The introduction is continued with an overview on current challenges regarding performance, durability, sustainability, cost and safety. Lastly, research trend on approaches to tackle the challenges are discussed by selected examples. T2 - 2025 Scientific and Technological Training Course "Design and Evaluation Methods of Fire Safety Engineered Materials" CY - Hefei, China DA - 20.10.2025 KW - Fundamentals of Batteries KW - Safety KW - Active Materials KW - Research Topics PY - 2025 AN - OPUS4-64917 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Fellinger, Tim-Patrick T1 - Sicherheit von NIB und das Potenzial synthetischer Kohlenstoff-Anoden N2 - Nach einer kurzen Einleitung zu kommerziellen Natrium-Ionen-Batterien, deren Zusammensetzung und Sicherheitstest die auch an der BAM untersucht wurden, folgt eine Vorstellung der Forschungsarbeiten des Fachbereich 3.6 im Rahmen des Verbundprojekts Dialysorb. Die Forschungsergebnisse stellen u.a. das Potenzial von synthetischen Anodenmaterialien dar. T2 - Deutsches Batterieforum 2025 CY - Berlin, Germany DA - 21.01.2025 KW - Natrium-Ionen-Batterien KW - Zusammensetzung KW - Potenzial KW - Sicherheit KW - Synthetische Anoden PY - 2025 AN - OPUS4-64904 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hickel, Tilmann A1 - Waske, Anja A1 - Tehranchi, Ali A1 - Bhattacharya, Biswajit A1 - Stawski, Tomasz M. A1 - Fellinger, Tim-Patrick A1 - Mehmood, Asad A1 - Witt, Julia A1 - Ozcan, Ozlem A1 - Guilherme Buzanich, Ana A1 - Kumar, Sourabh A1 - Mishra, Rajesh Kumar A1 - Holzer, Marco A1 - Stucchi de Camargo, Andrea Simone A1 - Agudo Jácome, Leonardo A1 - Manzoni, Anna A1 - Fantin, Andrea A1 - John, Elisabeth A1 - Hodoroaba, Vasile-Dan A1 - Bührig, Sophia A1 - Murugan, Jegatheesan A1 - Marschall, Niklas A1 - George, Janine A1 - Darvishi Kamachali, Reza A1 - Maaß, Robert A1 - Emmerling, Franziska T1 - Chemically complex materials enable sustainable high-performance materials N2 - Chemically complex materials (CCMats) 􀀀 including high-entropy alloys, oxides, and related multi-principal element systems 􀀀 offer a paradigm shift in materials design by leveraging chemical diversity to simultaneously optimize functional, structural, and sustainability criteria. The vastness of the compositional and structural space in CCMats propels the field into an expanding exploratory state. To reconcile functional and structural performance across this immense parameter space remains an open challenge. This Perspective evaluates the opportunities and challenges associated with harnessing chemical complexity across a broad spectrum of applications, such as hydrogen storage, ionic conductors, catalysis, magnetics, dielectrics, semiconductors, optical materials, and multifunctional structural systems. It is delineated how three central design strategies: targeted substitution (SUB), defect engineering (DEF), and diversity management (DIV) enable the reconciliation of high functional performance with long-term structural stability and environmental responsibility. Advances in computational thermodynamics, microstructure simulations, machine learning, and multimodal characterization are accelerating the exploration and optimization of CCMats, while robust data infrastructures and automated synthesis workflows are emerging as essential tools for navigating their complex compositional space. By fostering cross-disciplinary knowledge transfer and embracing data-driven design, CCMats are poised to deliver next-generation materials solutions that address urgent technological, energy, and environmental demands. KW - Chemically complex materials KW - Structural stability KW - Functional performance KW - Design strategies KW - Sustainability PY - 2026 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-655598 UR - https://www.sciencedirect.com/science/article/pii/S1359028626000033?via%3Dihub DO - https://doi.org/10.1016/j.cossms.2026.101256 SN - 1359-0286 VL - 42 SP - 1 EP - 26 PB - Elsevier Ltd. CY - Amsterdam AN - OPUS4-65559 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dietzmann, Simon A1 - Mehmood, Asad A1 - de Oliveira Guilherme Buzanich, Ana A1 - Emmerling, Franziska A1 - Fellinger, Tim-Patrick A1 - Thomas, A. T1 - Characterization of Solid-State Complexes by XAS N2 - Atomically dispersed metal-nitrogen doped carbons (M-N-C) are promising catalysts for the activation of small molecules such as O2 and CO2. These single atom catalysts (SAC) operate at the interface between homogenous and heterogenous catalysts. Currently, many examples of M-N-C are known with good oxygen reduction reaction activity but lacking a controlled synthesis of the specific active sites of the precatalyst. Recently, our group facilitated the synthesis of pure pyrrolic M-N4 sites using Zn ions as imprinters.[1] These amorphous materials obtained by active site imprinting method are characterized at the BAMline (Bessy II) by X-ray absorption spectroscopy (XAS). In-situ/operando measurements will be crucial in future work for a better understanding of the dynamic changes of the active site. T2 - InSynX Workshop 2023 CY - Sao Paulo, Brazil DA - 06.03.2023 KW - Solid-State Complexes PY - 2023 AN - OPUS4-58933 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Pedersen, Angus A1 - Zhu, Jinjie A1 - Barrio, Jesús A1 - Parker, Joseph A1 - Hunter, Robert D. A1 - Haigh, Sarah J. A1 - Fellinger, Tim-Patrick A1 - Stephens, Ifan E. L. A1 - Titirici, Maria-Magdalena T1 - Contribution of Mg-templated porosity to activity and durability in Fe–N–C O 2 reduction catalysts N2 - Atomically dispersed Fe in N-doped carbon (Fe–N–C) catalysts are leading platinum-group-metal-free candidates for the O2 reduction reaction in proton exchange membrane fuel cells (PEMFCs). Zeolitic imidazolate framework (ZIF-8) derived Fe–N–C present the most promising performance; however, they possess a narrow distribution of small micropores, which limits active site accessibility. Here, to induce hierarchical porosity in Fe–N–C, we report a systematic study on MgCl2·6H2O-templated ZIF-8-derived Fe–N–C catalysts for the O2 reduction reaction. MgCl2·6H2O addition induced complete Zn removal, collapse of the ZIF-8 framework, and formation of large micro- and mesopores, with graphene-like structures. N content was markedly reduced, with conversion from pyridinic to pyrrolic N species. Rotating disc electrode tests showed a progressive increase in O2 reduction activity with MgCl2·6H2O, which is strongly correlated (R2 = 0.98) to the formation of large micropores and small mesopores (1–4 nm). This introduces an indirect structure–activity design principle for Fe–N–Cs. The enhanced Fe–N–C porosity also leads to increased degradation rates under accelerated stress test conditions, which we attributed to the oxidation of disordered carbon domains and active Fe loss. This study highlights a key trade-off between porosity-driven O2 reduction activity and durability in Fe–N–C catalysts. KW - Porosity KW - Single atom KW - Oxygen reduction PY - 2026 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-657549 DO - https://doi.org/10.1039/d5ma01488c SN - 2633-5409 SP - 1 EP - 8 PB - Royal Society of Chemistry (RSC) AN - OPUS4-65754 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -