TY - CONF A1 - Falkenhagen, Jana T1 - Coupling techniques for copolymer characterization with focus on LC-MC T2 - ISPAC, 26th Int. Symposium on Polymer Analysis and Characterization CY - New Orleans, LA, USA DA - 2013-06-09 PY - 2013 AN - OPUS4-28631 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Falkenhagen, Jana T1 - Synthesis of Polylactides and thier characterization by coupling of liquid chromatographic mathods with MALDI-TOF-MS T2 - 7th International Symposium on Polymers for Advanced Technologies CY - Fort Lauderdale, FL, USA DA - 2003-09-21 PY - 2003 AN - OPUS4-3542 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Chapartegui-Arias, Ander A1 - Villajos Collado, José Antonio A1 - Myxa, Anett A1 - Beyer, Sebastian A1 - Falkenhagen, Jana A1 - Schneider, Rudolf A1 - Emmerling, Franziska T1 - Covalently Fluorophore-Functionalized ZIF‑8 Colloidal Particles as a Sensing Platform for Endocrine-Disrupting Chemicals Such as Phthalates Plasticizers N2 - We present the optical sensing of phthalate Esters (PAEs), a group of endocrine-disrupting chemicals. The sensing takes place as changes in the fluorescence emission intensity of aminopyrene covalently bound to the organic ligands of the metal−organic framework compound ZIF-8. In the presence of PAEs, a quenching of the fluorescence emission is observed. We evaluated strategies to engineer colloidal size distribution of the sensing particles to optimize the sensory response to PAEs. A thorough characterization of the modified ZIF-8 nanoparticles included powder X-ray diffractometry, transmission electron microscopy, high-performance liquid chromatography, and photophysical characterization. The presented capability of the fluorophore-functionalized ZIF-8 to sense PAEs complements established methods such as chromatography-based procedures, which cannot be used on-site and paves the way for future developments such as hand-held quick sensing devices. KW - Sensing KW - MOF PY - 2019 DO - https://doi.org/10.1021/acsomega.9b01051 VL - 4 IS - 17 SP - 17090 EP - 17097 PB - ACS AN - OPUS4-49562 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Ralph-Peter A1 - Falkenhagen, Jana A1 - Much, Helmut A1 - Schulz, Günter T1 - Charakterisierung von Si-Polymerarchitekturen durch Kopplung von flüssigchromatographischen Methoden mit der MALDI-TOF-Massenspektrometrie im DFG-Schwerpunktprogramm T2 - DFG-Kolloquium zum Schwerpunktprogramm "Silicium-Chemie" CY - Bielefeld, Deutschland DA - 1997-05-12 PY - 1997 AN - OPUS4-2231 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Falkenhagen, Jana A1 - Krüger, Ralph-Peter A1 - Schulz, Günter A1 - Weidner, Steffen T1 - Polymer characterization by LC / MALDI-MS coupling T2 - Bayreuther Polymer Symposium 2001 CY - Bayreuth, Germany DA - 2001-09-16 PY - 2001 CY - Bayreuth AN - OPUS4-2256 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Falkenhagen, Jana T1 - Copolymer structure elucidation by multidimensional techniques with focus on UPLC x ESI-TOF-MS N2 - Structure elucidation of complex synthetic copolymers still represents a challenge. An one-dimensional separation technique cannot give the answer to the question: What are the molar mass distribution (MMD), the functionality distribution (FTD), the chemical composition distribution (CCD), the monomer sequence distribution (MSD), the topology differences within a single broad distributed polymer sample? Since the first LC/ ESI-MS experiment of the Nobel prize winner John B. Fenn in 1984, the coupling of liquid chromatographic to mass spectrometric techniques gained a continuous rapid development. Often the deficiencies of stand-alone methods can be bridged. LC, blind to structural information needs mass spectrometry as one of the most powerful detectors able to give detailed information on e.g. the repeat units, functionalization or copolymer composition of the chromatographic separated constituents. A separation prior to MS reduces radical the dispersity which is one of the reasons for failing of MS. Also problems with different ionization probabilities in complex mixtures can partly be overcame. Different LC separation techniques as size exclusion chromatography (SEC), liquid adsorption chromatography (LAC), liquid chromatography at critical conditions (LCCC) and gradient elution liquid chromatography (GELC) combined with Matrix assisted Laser Desorption Ionization (MALDI) respectively Electrospray Ionization (ESI) Time of Flight (TOF) mass spectrometry are able to give information which otherwise are completely inaccessible. In some cases CID tandem mass spectrometry is applied. Fragmentation of suitable precursor ions resulted in typical fragment ion patterns. This technique enables an additional information on e.g. sequences, structural defects and topology of complex polymer mixtures. Herein a new approach is demonstrated to provide evidence of different functionalities and short block sequences in statistical EO-PO copolymers. Furthermore silsesquioxane mixtures and Polyglycerols are investigated concerning occurring topology effects. T2 - 253rd ACS National Meeting CY - San Francisco, CA, USA DA - 02.04.2017 KW - Copolymer KW - Microstructure KW - Liquid chromatography KW - Mass spectrometry PY - 2017 AN - OPUS4-43372 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Falkenhagen, Jana T1 - Limitations of SEC: Strategies for Improved Regulatory Polymer Analysis N2 - Polymers, composed of repeating units called monomers, exhibit a diverse range of properties, with molecular weight distribution (MWD) being particularly important for regulatory risk assessments. Size exclusion chromatography (SEC), or gel permeation chromatography (GPC), is the primary technique for MWD characterization, as detailed in OECD guidelines 118 and 119, along with DIN and ISO standards. However, SEC faces significant shortcomings that complicate the accurate determination of MWD and oligomer content. These limitations include the insolubility of certain polymers, crosslinking, and ultra-high molecular weight characteristics, which can exceed SEC's separation capabilities. The presence of salts or modifiers can further interfere with oligomer content determination, and the availability of appropriate SEC columns and calibration standards limits comparability across laboratories. To enhance SEC's reliability and applicability within regulatory frameworks, innovative methods and strategies are essential. Proposed solutions involve new sample preparation techniques, advanced data interpretation methods, and the establishment of standardized methodologies to promote harmonization. This is especially crucial in light of the expected Polymer REACh (PREACh) legislation, which aims to regulate polymer registration and risk assessment within the European market. Given the anticipated complexity of the registration process, which requires extensive data generation, proactive strategies are needed to address SEC's challenges. Currently, there are no viable alternatives for oligomer content determination, and the unique properties of polymers often necessitate tailored analytical approaches. Without new methodologies and guidelines, the polymer registration process could become burdensome and costly, jeopardizing important products and markets in the EU. Key areas for improvement include extending existing norms to cover a broader range of solvents, addressing high error margins in oligomer content determination, establishing harmonized approaches for dealing with side components, and providing clarity on measuring partially soluble polymers. In conclusion, addressing SEC's limitations through the development of comprehensive guidelines and harmonization is critical for ensuring accurate and efficient polymer analysis, ultimately facilitating smoother registration processes. T2 - SETAC Europe 35th Annual Meeting CY - Vienna, Austria DA - 11.05.2025 KW - Size exclusion chromatography KW - Polymers KW - REACH PY - 2025 AN - OPUS4-63309 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mix, Renate A1 - Gerstung, Vanessa A1 - Falkenhagen, Jana A1 - Schulze, Rolf-Dieter A1 - Friedrich, Jörg Florian T1 - Characterization of plasma-polymerized allyl alcohol polymers and copolymers with styrene KW - Plasma polymerization KW - Surface functionalization KW - Molar mass PY - 2007 SN - 0169-4243 SN - 1568-5616 VL - 21 IS - 5-6 SP - 487 EP - 508 PB - VNU Science Press CY - Utrecht AN - OPUS4-14765 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Falkenhagen, Jana A1 - Much, Helmut A1 - Stauf, W. A1 - Müller, A. H. E. T1 - Characterization of block copolymers by liquid adsorption chromatography at critical conditions. 1. Diblock copolymers N2 - Liquid adsorption chromatography at critical conditions (LACCC) in normal and in reversed-phase modes provides independent information on the molar mass distributions of both blocks of poly(methyl methacrylate)-block-poly(tert-butyl methacrylate), even if no information about the precursor is available. In addition, the amount of unreacted precursor can be determined, even if its molar mass is comparable to that of the total block copolymer. The reversal of elution order by changing of stationary and mobile phases makes it possible to independently characterize each block in the SEC mode of the LACCC system. Thus, complete structural information is obtained even without using two-dimensional chromatographic techniques. PY - 2000 DO - https://doi.org/10.1021/ma991903j SN - 0024-9297 SN - 1520-5835 VL - 33 IS - 10 SP - 3687 EP - 3693 PB - American Chemical Society CY - Washington, DC AN - OPUS4-2172 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weidner, Steffen A1 - Falkenhagen, Jana T1 - Imaging mass spectrometry for examining localization of polymeric composition in matrix-assisted laser desorption/ionization samples N2 - The localization of polymeric composition in samples prepared for matrix-assisted laser desorption/ionization (MALDI) analysis has been investigated by imaging mass spectrometry. Various matrices and solvents were used for sample spot preparation of a polybutyleneglycol (PBG 1000). It was shown that in visibly homogeneous spots, prepared using the dried droplet method, separation between matrix and polymer takes place. Moreover, using -cyano-4-hydroxycinnamic acid (CCA) as matrix and methanol as solvent molecular mass separation of the polymer homologues in the spots was detectable. In contrast to manually spotted samples, dry spray deposition results in homogeneous layers showing no separation effects. KW - Imaging KW - MALDI TOF Massenspektrometrie KW - Polymere PY - 2009 DO - https://doi.org/10.1002/rcm.3919 SN - 0951-4198 SN - 1097-0231 VL - 23 IS - 5 SP - 653 EP - 660 PB - Wiley CY - Chichester AN - OPUS4-19622 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gähde, J. A1 - Fischer, T. A1 - Falkenhagen, Jana A1 - Dittmar, A. A1 - Gnauck, R. T1 - Interaction of Polyurethane Model Compounds with Metal Oxides KW - Polyurethane model compounds KW - Mono layers KW - Specific interaction at oxide surfaces KW - Catalyzed hydrolysis PY - 1997 SN - 0021-8995 SN - 1097-4628 VL - 64 SP - 2449 EP - 2455 PB - Wiley InterScience CY - Hoboken, NJ AN - OPUS4-2156 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Falkenhagen, Jana T1 - Characterization of co (polyamide)s N2 - Charactrization of Co(polyamide)s Molar mass distribution; Functionalization; supression of end group effects in favor of sequence distribution analysis; Evidence of of randomization with increasing reaction time T2 - Polyamide Meeting, DSM CY - Sittard, The Netherlands DA - 20.04.2018 KW - Liquid chromatography KW - Mass spectrometry of polymers PY - 2018 AN - OPUS4-44747 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -