TY - JOUR A1 - Gluth, Gregor A1 - Zhang, W. A1 - Gaggl, M. A1 - Hillemeier, B. A1 - Behrendt, F. T1 - Multicomponent gas diffusion in hardened cement paste at temperatures up to 350 °C N2 - Diffusional gas transport of a H2/CO2 mixture versus N2 in the pore system of hardened cement pastes was studied at four temperatures up to 350 °C in a Wicke-Kallenbach cell. The pastes possessed separation factors αH2,CO2 from 1.42 to 3.43, i.e. the diffusion of hydrogen took place considerably faster than the diffusion of carbon dioxide. The separation factors depended on the threshold radii of the pastes, smaller threshold radii leading to higher separation factors. The Knudsen numbers of the controlling constrictions of the pore system and the temperature dependence of the effective diffusion coefficients of the gases show that gas transport in these constrictions takes place in the transient regime between Knudsen diffusion and bulk diffusion, smaller constriction widths leading to predominating Knudsen diffusion. It is therefore possible to use cement paste membranes to separate gas components of low molecular weight from higher weight components. KW - Microstructure (B) KW - Mercury porosimetry (B) KW - Diffusion (C) KW - Cement paste (D) KW - Gas separation KW - Pore structure PY - 2012 DO - https://doi.org/10.1016/j.cemconres.2012.02.001 SN - 0008-8846 SN - 1873-3948 VL - 42 IS - 5 SP - 656 EP - 664 PB - Pergamon Press CY - New York, NY AN - OPUS4-25655 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Anca-Couce, A. A1 - Zobel, N. A1 - Berger, Anka A1 - Behrendt, F. T1 - Smouldering of pine wood: kinetics and reaction heats N2 - A kinetic model of smouldering of pine wood is determined by thermo-gravimetric analysis (TGA), describing the reactions of wood pyrolysis, wood oxidation and char oxidation. Thermo-gravimetric experiments were conducted with constant heating rates ranging from 2.5 to 10 K/min in atmospheres of pure nitrogen and mixtures of nitrogen and oxygen (with 20.5%, 8.2% and 4.3% O2). At first wood pyrolysis and char oxidation experiments are carried out in an independent way. Then smouldering experiments are conducted, which combine the two previous reactions with wood oxidation. Finally, the heats of the reactions are determined by differential scanning calorimetry (DSC). The results are discussed, compared with the literature and the derived kinetic model is presented, which includes five components: three pseudo-components of wood – representing roughly cellulose, hemi-cellulose and lignin – as well as char and ashes. KW - Smouldering KW - Kinetics KW - TGA KW - Biomass PY - 2012 DO - https://doi.org/10.1016/j.combustflame.2011.11.015 SN - 0010-2180 SN - 1556-2921 VL - 159 IS - 4 SP - 1708 EP - 1719 PB - Elsevier Inc. CY - New York, NY AN - OPUS4-25761 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Zhang, W. A1 - Gaggl, M. A1 - Gluth, Gregor A1 - Behrendt, F. T1 - Gas separation using porous cement membrane N2 - Gas separation is a key issue in various industrial fields. Hydrogen has the potential for application in clean fuel technologies. Therefore, the separation and purification of hydrogen is an important research subject. CO2 capture and storage have important roles in 'green chemistry'. As an effective clean technology, gas separation using inorganic membranes has attracted much attention in the last several decades. Membrane processes have many applications in the field of gas separation. Cement is one type of inorganic material, with the advantages of a lower cost and a longer lifespan. An experimental setup has been created and improved to measure twenty different cement membranes. The purpose of this work was to investigate the influence of gas molecule properties on the material transport and to explore the influence of operating conditions and membrane composition on separation efficiency. The influences of the above parameters are determined, the best conditions and membrane type are found, it is shown that cementitious material has the ability to separate gas mixtures, and the gas transport mechanism is studied. KW - Gas separation KW - Porous membrane KW - Clean fuel KW - Cement membrane KW - Inorganic membranes PY - 2014 DO - https://doi.org/10.1016/S1001-0742(13)60389-7 SN - 1001-0742 SN - 1878-7320 VL - 26 IS - 1 SP - 140 EP - 146 CY - Beijing, China AN - OPUS4-30039 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gluth, Gregor A1 - Gaggl, M. A1 - Zhang, W. A1 - Hillemeier, B. A1 - Behrendt, F. ED - Udomkichdecha, W. ED - Böllinghaus, T. ED - Manonukul, A. ED - Lexow, J. T1 - Membranes made of hardened cement paste for processing wood gas - Influence of paste composition and separation factors N2 - The efficiency of wood gasification can be improved by applying membrane based gas separation operations in several of its sub-processes. In the present study the use of membranes made of hardened cement pastes for this purpose was investigated to provide a low cost alternative to conventional membrane materials. The pastes were tested for their diffusional properties in a Wicke-Kallenbach cell and analyzed with regard to their pore structure. The use of low water to binder ratios and slag and/or pozzolans led to a finer pore structure and higher separation factors; in particular, an approximately linear dependence of the separation factors on the threshold radii was observed. The results implicated that Knudsen diffusion is the prevailing diffusion mechanism in the membranes. Deviations from the theoretically expected separation factors were found, which may be ascribed to concentration polarization and channeling effects. KW - Hardened cement paste KW - Pore structure KW - Diffusion KW - Gas separation PY - 2014 SN - 978-3-319-11339-5 SN - 978-3-319-11340-1 DO - https://doi.org/10.1007/978-3-319-11340-1_20 SP - 199 EP - 209 PB - Springer AN - OPUS4-32065 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Eberwein, Robert A1 - Rogge, Andreas A1 - Behrendt, F. A1 - Knaust, Christian T1 - Dispersion Modeling of LNG-Vapor on Land – A CFD-Model Evaluation Study N2 - Based on methane from renewable resources, LNG is an alternative fuel for heavy and long-distance traffic in land transport. Contrary to its positive properties, the fuel contains risks from an explosion and extremely low temperatures for personal and infrastructure safety. CFD-models are suitable for doing risk analyses for arbitrary scenarios. For examining how to model for risk research the dispersion of LNG-vapor, this paper contains a model variant study, with an evaluation by experiments. This paper describes the use of the CFD-code ANSYS Fluent for simulating experiments of the ‘LNG Safety Program Phase II‘. The content of the well-documented experiments was the research of the vaporization rate of LNG on land and the dispersion of LNG-vapor in the air. Based on the comparison to two experiments, overall 12 CFD-model variants with varying thermal and turbulence parameters were examined how they affect the transient LNG-vapor dispersion in air. The definition of turbulence-boundary-condition at the domain borders had the biggest impact on modeling, followed by the turbulence model. The most accurate model variant had been applied for observing the spreading behavior of LNG-vapor in the air after evaporation on land and analyzing the influence of the LNG-composition to the dispersion. The results show that the mixture of LNG-vapor and the air in the free field is cooler than the ambient air and spreads like a heavy gas on the ground. KW - LNG KW - CFD KW - Heavy gas KW - Model evaluation PY - 2020 DO - https://doi.org/10.1016/j.jlp.2020.104116 VL - 65 SP - 104116 PB - Elsevier Ltd. AN - OPUS4-50697 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Berger, Anka A1 - Anca-Couce, A. A1 - Dieguez-Alonso, A. A1 - Zobel, N. A1 - Kienzl, N. A1 - Behrendt, F. T1 - Influence of heterogeneous secondary reactions during slow pyrolysis on char oxidation reactivity of woody biomass N2 - The influence of heterogeneous secondary reactions on char oxidation reactivity, which can take place during slow pyrolysis processes in a woody biomass particle, is analyzed in this study. To this end, the oxidative behavior of primary char produced in a thermobalance with initial wood masses of a few milligrams is compared to the behavior of char produced under conditions enhancing secondary reactions, i.e., large particle and bed sizes in fixed-bed reactors. The influence of the Maximum conversion temperature, heating rate, and catalytic effect of inorganics is also studied to compare the effect of each parameter. Results show that a significant reduction in reactivity takes place when char is produced under conditions enhancing These secondary reactions during pyrolysis. The effect is of similar order as the effect as a result of thermal annealing at 900 °C or the catalytic effect of alkali and alkaline earth metals. Therefore, the presence of heterogeneous secondary reactions during pyrolysis should be taken into account in studies addressing biomass char reactivity. Furthermore, it is shown that the reduction of reactivity as a result of secondary reactions is related to neither the loss of oxygen-containing functional groups nor the potential blocking of pores, specially micropores, resulting from the formation of this secondary char. The explanation may, therefore, lie on the deactivation or blocking of active sites by the secondary char. KW - Char conversion KW - Char reactivity KW - Pyrolysis KW - Woody biomass KW - Thermogravimetric analysis KW - TGA PY - 2017 DO - https://doi.org/10.1021/acs.energyfuels.6b02350 SN - 0887-0624 SN - 1520-5029 VL - 31 IS - 3 SP - 2335 EP - 2344 PB - ACS Publications AN - OPUS4-40189 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schneider, I. A1 - Kebelmann, Katharina A1 - Risse, S. A1 - Dieguez-Alonso, A. A1 - Schartel, Bernhard A1 - Strecker, C. A1 - Behrendt, F. T1 - Hydroliquefaction of Two Kraft Lignins in a Semibatch Setup under Process Conditions Applicable for Large-Scale Biofuel Production N2 - Hydroliquefaction is a possible pathway to produce liquid transportation fuels from solid feedstocks like coal or biomass. Though much effort has been put into the investigation of maximizing the oil yield using expensive catalysts and pasting oils in batch setups, little is known about how to commercialize the process. This work aims at the demonstration of lignin hydroliquefaction under conditions interesting for commercial operation. The results from hydroliquefaction experiments of two different lignin types using a cheap iron-based catalyst and anthracene oil as the pasting oil in a semibatch system are presented here. Oil yields of above 50% are reached without observing coke formation. Extensive analyses of the feedstocks and product oils were performed. The process supplies high-quality oil, while differences in the decomposition path of both lignin types are observed. An high heating value of 39 400 J/g and H/C and O/C ratios of up to 1.6 and 0.1, respectively, are detected for the produced bio-oils. KW - Lignin KW - Hydroliquefaction KW - Biofuel PY - 2019 DO - https://doi.org/10.1021/acs.energyfuels.9b02572 SN - 0887-0624 SN - 1520-5029 VL - 33 IS - 11 SP - 11057 EP - 11066 PB - ACS AN - OPUS4-50102 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -