TY - CONF A1 - Malitte, Hans-Joachim A1 - Ewert, Uwe T1 - BAM Reference Films for Calibration of Transmission Densitometers T2 - BAM-DIN Workshop on Image Technology CY - Berlin, Germany DA - 2005-04-18 PY - 2005 AN - OPUS4-11400 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Redmer, Bernhard A1 - Ewert, Uwe A1 - Neundorf, B. A1 - Jakob, M. T1 - Tomographie 3D-Radiometry for the Visualisation and Measurement of the Defects of Girth Seams T2 - 9th European Conference on NDT CY - Berlin, Germany DA - 2006-09-25 KW - Röntgen KW - Digitale Detektoren KW - Tomographie KW - TomoCAR KW - Schweißnähte KW - Analyse KW - Bewertung PY - 2006 SN - 3-931381-86-2 SP - 1(?) EP - 10(?) PB - European Federation for Non-Destructive Testing CY - Berlin AN - OPUS4-13971 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, J. A1 - Kiechle, H. A1 - Ewert, Uwe A1 - Rädel, Christoph A1 - Redmer, Bernhard T1 - Mobile Computer Tomography for In-Service Inspection in Nuclear Power Plants T2 - 9th European Conference on NDT CY - Berlin, Germany DA - 2006-09-25 KW - Röntgen KW - Digitale Detektoren KW - Tomographie KW - TomoCAR KW - Schweißnähte KW - Analyse KW - Bewertung PY - 2006 SN - 3-931381-86-2 SP - 1(?) EP - 6(?) PB - European Federation for Non-Destructive Testing CY - Berlin AN - OPUS4-14376 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gaal, Mate A1 - Müller, Christina A1 - Ewert, Uwe A1 - Wilrich, Peter-Th. A1 - Spyra, W. T1 - Trial Design for Testing and Evaluation of Metal Detectors Used in Humanitarian Landmine Clearance T2 - 9th European Conference on NDT CY - Berlin, Germany DA - 2006-09-25 KW - Zuverlässigkeit in der Minensuche KW - Feldtests KW - Modulares Modell KW - Metalldetektor PY - 2006 SN - 3-931381-86-2 SP - 1(?) EP - 10(?) PB - European Federation for Non-Destructive Testing CY - Berlin AN - OPUS4-14420 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Osterloh, Kurt A1 - Ewert, Uwe A1 - Krstelj, V. T1 - EFNDT WG - From Landmines to Public Safety N2 - Some of the most perfidious remnants of war are mines threatening not only combating parties but also innocent civilian lives. Moreover, they make large areas inaccessible that otherwise could be used economically. This threat exists even long after cessation of hostile actions. Up to now, the range of tools for humanitarian demining is confined to mine detection dogs, metal detectors, prodders, manual excavation tools and mechanical clearance machines (flails and tillers). In 1999, this gave rise for the Board of Directors of the EFNDT to suggest whether detection methods commonly applied may also be helpful in detecting mines and the like. It was proposed to transfer existing NDT technology to these areas. As a consequence, Working Group 5 “Antipersonnel Landmine Detection (APLD)” was founded to support this concept. As soon as the group became aware of the fact that mines were encountered not only in the soil but also elsewhere the name was changed to “Antipersonnel Mine Detection (APMD)”. It now is becoming more and more obvious that vicious devises such as mines and bombs threatening lives everywhere represent an increasing risk to everybody. In contrast, the particular interest in antipersonnel mine detection is decreasing in favour of general security and safety. However, all these problems have in common that such devices need to be detected in time, i.e. before they become effective. This gives reason to extend the scope of the existing Working Group 5 accordingly. It is of advantage to exchange existing knowledge and there is a chance to keep the awareness of the mine problem alive by this way. T2 - 9th European Conference on NDT CY - Berlin, Germany DA - 2006-09-25 KW - Working Group KW - NDT KW - Humanitarian Demining KW - Public Safety KW - Security KW - Detection Technology KW - Bomb threat PY - 2006 SN - 3-931381-86-2 SP - 1 EP - 10(?) PB - European Federation for Non-Destructive Testing CY - Berlin AN - OPUS4-14390 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Osterloh, Kurt A1 - Müller, Christina A1 - Noske, Reinhard A1 - Böcker, Wolfgang D. G. A1 - Ewert, Uwe T1 - Threat Detection Technologies Covering an Extended Range of Eventualities T2 - 9th European Conference on NDT CY - Berlin, Germany DA - 2006-09-25 KW - Hazardous and toxic gasses and vapours KW - Warfare substances KW - Threats other than explosives KW - Multi-gas sensor KW - Detection technology PY - 2006 SN - 3-931381-86-2 SP - 1(?) EP - 11(?) PB - European Federation for Non-Destructive Testing CY - Berlin AN - OPUS4-14472 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ewert, Uwe T1 - Neue Normen zur Digitalen Industriellen Radiologie als Beitrag zur Steigerung der Wirtschaftlichkeit und der technischen Sicherheit industrieller Anlagen in Chemie und Energie T2 - Erster Tag der offenen Tür des DIN CY - Berlin, Germany DA - 2006-10-14 PY - 2006 AN - OPUS4-15847 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Christina A1 - Ewert, Uwe A1 - Pavlovic, Mato A1 - Scharmach, Katrin A1 - Ronneteg, U. A1 - Ryden, H. T1 - Zuverlässigkeit von ZfP-Verfahren zur Gewährleistung der Integrität von Cu-Schweißnähten zur sicheren Endlagerung radioaktiver Abfälle KW - Zerstörungsfreie Prüfung KW - Zuverlässigkeit KW - POD PY - 2007 SN - 978-3-931381-98-1 SP - 1 EP - 18 (Vortrag 44) PB - DGZfP CY - Berlin AN - OPUS4-16007 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Osterloh, Kurt A1 - Müller, Christina A1 - Noske, Reinhard A1 - Böcker, Wolfgang D. G. A1 - Ewert, Uwe T1 - Materialprüfung und Erkennung von Gefahren für die öffentliche Sicherheit T2 - DGZfP-Jahrestagung 2007 CY - Fürth, Deutschland DA - 2007-05-14 KW - Gefahrstoffe KW - Sicherheit KW - Kontrollen KW - Gefahrstoffnachweis KW - EFNDT Arbeitsgruppe 5 PY - 2007 SN - 978-3-931381-98-1 SP - 1 EP - 11 PB - DGZfP CY - Berlin AN - OPUS4-16074 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ewert, Uwe A1 - Goebbels, Jürgen T1 - Industrielle Computertomographie T2 - Fachtagung Wels CY - Wels, Austria DA - 2008-02-27 PY - 2008 AN - OPUS4-16696 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ewert, Uwe A1 - Beckmann, Jörg A1 - von Chrzanowski, Lars A1 - Brekow, Gerhard A1 - Brackrock, Daniel T1 - Time of flight diffraction (ToFD) with THz radiation - an alternative to the ultra sound - ToFD technique for non-metallic materials N2 - A time domain spectrometer in the range of 0.5–2 THz was used for time of flight (ToF) measurements of THz pulses for imperfection detection in non metallic materials. The measurements were performed in comparison to the established ultra sound pulse echo (PE) and time of flight diffraction (ToFD) technique. No coupling agent and no contact to the surface is required for THz ToFD measurements. Plastic test specimen with notches, voids and drilled side holes were used to study reflected and diffracted response signals. No major differences were observed between the UT and THz ToFD records for the first surface of the notches, voids and holes. Additionally to the UT records also signals were obtained from its back side and a second raw of holes. The THz measurement is fast and has the potential to substitute UT applications in some industrial areas. Within the German project 'Handheld' the potential for miniaturization of the time domain equipment is explored for efficient application. KW - Spectrometers KW - Ultrasonic diffraction KW - Acoustic signal processing KW - Voids (solid) KW - Terahertz time domain spectroscopy KW - Ultrasonic KW - Time of flight diffraction KW - Non destructive testing KW - Polymers PY - 2011 DO - https://doi.org/10.1063/1.3591898 SN - 0094-243X VL - 1335 SP - 541 EP - 548 PB - American Institute of Physics CY - Melville, NY, USA AN - OPUS4-23895 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Fratzscher, Daniel A1 - Beckmann, Jörg A1 - von Chrzanowski, Lars A1 - Ewert, Uwe T1 - Computed THz - tomography N2 - Available THz Time Domain Spectroscopy (THz-TDS) systems can be applied in a pulse echo mode for tomographic application. In contrast to common transmission methods, a TDS reflection geometry was used to inspect cylindrical polyethylene samples with internal voids of known shape. The geometry of the voids was simulated and its shape was reconstructed. B-scan pulse echo images were acquired in the time domain, similar to UT pulse echo techniques on basis of the numeric model. The results were used to verify the simulation model and the reconstruction algorithm, based on a modified Synthetic Aperture Focusing Technique (SAFT). The model was used to conclude recommendations on an optimized measurement setup in the reflection mode. Based on that, the quality of the reconstructed tomograms was improved. T2 - 18th WCNDT - World conference on nondestructive testing CY - Durban, South Africa DA - 2012-04-16 KW - THz KW - Computed tomography KW - Non metallics KW - SAFT KW - Delaminations PY - 2012 SN - 978-0-620-52872-6 SP - 1 EP - 10 (Paper 291) AN - OPUS4-25874 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ewert, Uwe A1 - Redmer, Bernhard A1 - Rädel, Christoph A1 - Schnars, U. A1 - Henrich, R. A1 - Bavendiek, K. A1 - Jahn, M. T1 - Mobile computed tomography for inspection of large stationary components in nuclear and aerospace industries N2 - Mobile Tomographic Computer Aided Radiometry (TomoCAR) is based on the mechanical position control of an X-ray tube in front of an object and the application of a Digital Detector Array (DDA) behind it. Several hundred radiometric projections in small angle steps are acquired during the controlled movement of the X-ray tube along a preselected way. The tomographic or laminographic reconstruction allows the three-dimensional (3D) representation of flaws. A specially designed radiometric detector array with small internal unsharpness and high image contrast was used for visualization and sizing of planar and volumetric defects in austenitic welds in nuclear power plants. A German pilot study was successfully performed on the basis of the European network of inspection and qualification (ENIQ) guidelines. This was the precondition for several applications of TomoCAR in nuclear power stations in Germany and Switzerland. A versatile computed tomography (CT) system was developed on basis of the TomoCAR design for in situ inspection of large aircraft components under production conditions. A gate based planar computed tomograph was constructed and tested for inspection of the integrity of CFRP stringers, embedded in aircraft fibre composite shells. A probability of crack visibility >90% could be determined. KW - Computed tomography KW - X-ray KW - Welding KW - Fibre composites KW - Austenite KW - Nuclear KW - Aerospace PY - 2012 DO - https://doi.org/10.2320/matertrans.I-M2011848 SN - 1345-9678 SN - 1347-5320 VL - 53 IS - 2 SP - 308 EP - 310 PB - Japan Institute of Metals CY - Sendai AN - OPUS4-25997 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Osterloh, Kurt A1 - Wrobel, Norma A1 - Ewert, Uwe A1 - Krstelj, V. A1 - Zvizdic, D. ED - Ender, J. ED - Fiege, J. T1 - Detection technologies - common concepts in security and safety T2 - Future Security 2011 Conference CY - Berlin, Germany DA - 2011-09-05 KW - Technical safety and public security KW - Bridging separate competence areas PY - 2011 SN - 978-3-8396-0295-9 SP - 125 EP - 127 CY - Berlin AN - OPUS4-25354 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Beckmann, Jörg A1 - von Chrzanowski, Lars A1 - Fratzscher, Daniel A1 - Ewert, Uwe ED - Thompson, D. O. ED - Chimenti, D. E. T1 - Spectral and spatial nondestructive examination of dielectric materials with THz time domain spectroscopy N2 - A time domain spectrometer T-ray 2000® operating in the range of 0.2-2 THz was used for Time of Flight measurements. A series of ethanol water mixtures from 10% to 90% were produced subsequently filled in polystyrene cells and analyzed in the T-ray 2000 TDS system in the reflection mode. The reflectivity of the material liquid interface is strongly influenced by the ethanol concentration in water. The reciprocal reflection coefficient of the material liquid interface was found to be a useful discriminating feature for further Probably of Detection calculations which can be used for the performance evaluation of potential THz bottle scanners. THz pulse echo (PE) measurements were performed in comparison to the established ultra sound PE technique for flaw detection of plastics. Synthetic aperture reconstructions were applied for simulated data to reconstruct the flaw shape. The results were compared with B-scan images of a high density polyethylene (HDPE) test cylinder. Existing restrictions on the quality of the back projected images and limits of the existing model are discussed in detail. T2 - 38th Annual Review of Progress in Quantitative Nondestructive Evaluation CY - Burlington, VT, USA DA - 17.07.2011 KW - Terahertz time domain spectroscopy KW - Time of flight diffraction KW - Non destructive testing KW - Polymers KW - Probability of detection KW - Thz Tomography PY - 2012 SN - 978-0-7354-1013-8 DO - https://doi.org/10.1063/1.4716279 SN - 0743-0760 SN - 0094-243X N1 - Serientitel: AIP conference proceedings – Series title: AIP conference proceedings VL - 31A IS - 1430 SP - 573 EP - 580 PB - American Institute of Physics CY - Melville, NY AN - OPUS4-26103 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Takahashi, Kazunori A1 - Pavlovic, Mato A1 - Bertovic, Marija A1 - Ewert, Uwe A1 - Müller, Christina A1 - Ronneteg, U. ED - Thompson, D.O. ED - Chimenti, D.E. T1 - Application of POD to complex industrial problems: new approaches N2 - Ultrasonic phased array NDE has been applied to ensure the integrity of canisters for encapsulation of spent nuclear fuel. The performance of the NDE system is evaluated by the POD analysis. The POD analysis using a common method, â versus a, has been modified for the phased array ultrasonic inspections by two approaches: to take more influencing parameters into a, and to use a more sophisticated quantity as â. The POD with new a allows more detailed interpretation of POD for each parameter, and the new â gives more realistic POD. The methods are discussed and demonstrated with experimental data. In addition, an investigation of human factors is being planned and the plan is discussed. KW - Nondestructive testing KW - Probability KW - Ultrasonics KW - Ultrasonic KW - Phased array KW - Probability of Detection (POD) KW - Reliability KW - Nuclear waste PY - 2009 SN - 978-0-7354-0629-2 DO - https://doi.org/10.1063/1.3114180 N1 - Serientitel: AIP conference proceedings – Series title: AIP conference proceedings VL - 28 SP - 1824 EP - 1831 AN - OPUS4-26086 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - von Chrzanowski, Lars A1 - Beckmann, Jörg A1 - Marchetti, Barbara A1 - Ewert, Uwe A1 - Schade, U. T1 - Terahertz time domain spectroscopy for non-destructive testing of hazardous liquids N2 - Flüssige Gefahr- und Brennstoffe sowie explosive Flüssigkeiten werden mittels zeitaufgelöster Terahertz-Spektroskopie (THZ-TDS) in Analogie zu den in der zerstörungsfreien Werkstoffprüfung verwendeten Strategien untersucht. Verschiedene polare Flüssigkeiten (Alkohole, Aceton, Wasserstoffperoxid, Nitromethan), unpolare Flugzeug- und Kraftfahrzeugkraftstoffe sowie organische Lösungsmittel werden in der praxisrelevanten Reflexionsgeometrie berührungs- und zerstörungsfrei im Zeitbereich charakterisiert. Die Absorptions- und Brechungsindizes einer repräsentativen Auswahl von Flüssigkeiten wurden im Frequenzbereich zwischen 0.1 THz und 1.1 THz unter Verwendung der Transmissionsanordnung spektral ermittelt. Die Messkonfiguration wird für stark und schwach absorbierende Flüssigkeiten jeweils angepasst. KW - Zeitaufgelöste Terahertz-Spektroskopie (THZ-TDS) KW - Flüssige Gefahr und Brennstoffe KW - Time domain spectroscopy PY - 2012 SN - 0025-5300 VL - 54 IS - 6 SP - 444 EP - 450 PB - Hanser CY - München AN - OPUS4-26057 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ewert, Uwe T1 - Zum Zusammenhang von Grauwerten und dem normierten und unnormierten Signal/Rausch-Verhältnis in der Digitalen Radiographie - die neue Standart-Prozedur nach ISO/DIS 17636-2 und prEN 14784-2 T2 - DGZfP-Jahrestagung 2011 CY - Bremen, Germany DA - 2011-05-30 PY - 2011 AN - OPUS4-26667 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ewert, Uwe T1 - Essential Parameters and Conditions for Optimum Image Quality in Digital Radiology T2 - 18th World Conference on NDT (WCNDT 2012) CY - Durban, South Africa DA - 2012-04-16 PY - 2012 AN - OPUS4-26650 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - LaCivita, K. A1 - Ewert, Uwe T1 - ÊPS-approach -Equivalent penetrameter sensitivity as applied to computed radiography KW - ZfP KW - Radiographie KW - Bildqualität KW - Speicherfolien PY - 2012 SN - 0025-5327 VL - 70 IS - 8 SP - 925 EP - 930 PB - Society for Nondestructive Testing CY - Columbus, Ohio AN - OPUS4-26698 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Fry, D. A1 - Ewert, Uwe A1 - Gollwitzer, Christian A1 - Neuser, E. A1 - Selling, J. T1 - Measuring microfocal spots using digital radiography KW - ZfP KW - Radiographie KW - Bildqualität KW - Röntgen-Röhren KW - Brennfleckmessung PY - 2012 SN - 0025-5327 VL - 70 IS - 8 SP - 981 EP - 990 PB - Society for Nondestructive Testing CY - Columbus, Ohio AN - OPUS4-26701 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ewert, Uwe T1 - Die Rolle der ZfP-Zuverlässigkeitsanalyse für sicheres Produktdesign Multiparameter-PODt T2 - DGZfP-Jahrestagung CY - Graz, Austria DA - 2012-09-17 PY - 2012 AN - OPUS4-26994 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ewert, Uwe T1 - Verbesserte Bildqualität durch Kalibrierung von digitalen Detektoren im Vergleich zur Film-Radiographie T2 - DACH Jahrestagung der DGZfP CY - Graz, Austria DA - 2012-09-17 PY - 2012 AN - OPUS4-26614 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Christina A1 - Bertovic, Marija A1 - Pavlovic, Mato A1 - Kanzler, Daniel A1 - Ewert, Uwe A1 - Pitkänen, J. A1 - Ronneteg, U. T1 - Paradigm shift in the holistic evaluation of the reliability of NDE systems N2 - Das Ziel des Artikels ist es eine Übersicht über neue methodische Ansätze und Verfahren zur Bewertung der Zuverlässigkeit von ZfP-Systemen in Übereinstimmung mit den spezifischen Anforderungen verschiedener industrieller Anwendungen zu geben. Nach einem Überblick über die in den vergangenen Jahrzehnten erreichten Fortschritte, wird der Fokus auf die gegenwärtigen Entwicklungen gerichtet. Für hohe Sicherheitsanforderungen wurde die quantitative Fehlerauffindwahrscheinlichkeit (probability of detection, POD) basierend auf 'hit/miss'- oder 'Signal-Response'-Analysen und die ROC-Analyse (Receiver Operating Characteristics) als typische Werkzeuge entwickelt. Im Rahmen des modularen Modells für die ZfP-Zuverlässigkeit unterscheidet man zwischen den rein physikalisch-technischen Einflussfaktoren, den industriellen Anwendungsfaktoren und den menschlichen Faktoren. Es hilft zum Beispiel zu erkennen, welche dieser Faktoren man in Modellierungsrechnungen bzw. mittels offenen oder Blindversuchen untersuchen kann. Ein neues Paradigma wird für die Betrachtung der POD als eine Funktion der gewählten Systemparameter und somit als Optimierungswerkzeug verwendet, anstelle sie für die endgültige Beurteilung zu nehmen. Zur Handhabung der Zuverlässigkeitsuntersuchung von realen Defekten in einer realistischen Umgebung werden ökonomisch vertretbare, aber dennoch präzise genug arbeitende Methoden, wie der Ansatz von Bayes oder modellbasierte Methoden vorgestellt. Die menschlichen Faktoren sind oft von ausschlaggebender Wichtigkeit für die Gesamtzuverlässigkeit. Hier hilft ein systematischer psychologischer Ansatz die Engpässe und Verbesserungsmöglichkeiten zu finden. KW - Zuverlässigkeit KW - Modulares Modell KW - POD KW - Human factors PY - 2013 DO - https://doi.org/10.3139/120.110433 SN - 0025-5300 VL - 55 IS - 4 SP - 261 EP - 269 PB - Hanser CY - München AN - OPUS4-28831 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kanzler, Daniel A1 - Müller, Christina A1 - Ewert, Uwe A1 - Pitkänen, J. T1 - Einsatz der Bayes'schen Statistik in der Zuverlässigkeitsbestimmung von zerstörungsfreien Prüfsystemen N2 - Die Fehlerauffindwahrscheinlichkeit oder 'Probability of Detection' ist zu einer wichtigen Qualitätskennzahl von zerstörungsfreien Prüfsystemen geworden. Die Einschätzung von nur künstlichen Fehlern ist jedoch als Bewertungsgrundlage meist nicht ausreichend. Die später verwendeten Prüfobjekte mit den real vorkommenden Fehlern sind die zu betrachtende Basis, für die der Endanwender eine gültige Qualitätseinschätzung der angewandten zerstörungsfreien Prüfung fordert. Jedoch ist bei dem Fall, dass die Datenmenge gering ist, auch die Aussage der POD beschränkt. Es muss daher eine Zwischenlösung gefunden werden, in der die Informationen von beiden Prüfungen kombiniert werden. Die Mathematik ermöglicht mit der Bayes'schen Statistik, diese Informationen miteinander zu kombinieren und somit beide Informationen in die Bewertung einfließen zu lassen. Dabei spielt jedoch der Zusammenhang zwischen Signal und Fehlerausprägung eine wichtige Rolle. Praktisch angewendet und erprobt wird diese Vorgehensweise für die Bewertung der zerstörungsfreien Prüfungen der Firma POSIVA, die sich mit dem Bau eines Endlagers für hochradioaktiven Abfall in Finnland beschäftigt. KW - POD KW - RT KW - Bayes'sches updating PY - 2013 DO - https://doi.org/10.3139/120.110432 SN - 0025-5300 VL - 55 IS - 4 SP - 254 EP - 260 PB - Hanser CY - München AN - OPUS4-28832 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Pavlovic, Mato A1 - Müller, Christina A1 - Ewert, Uwe A1 - Ronneteg, U. A1 - Pitkänen, J. A1 - Boller, C. T1 - Safe product design - the role of the NDT reliability analysis N2 - Im Zuge der Anwendung des Schadens-Toleranz-Prinzips wird ein adäquates zerstörungsfreies Prüfsystem benötigt um strukturelle Integrität sicher zu stellen. Wenn ein zerstörungsfreies Prüfsystem jedoch bis zu den Grenzen der Detektionsfähigkeit beansprucht wird, liefert es keine übereinstimmende Indikationen der Defektentdeckung (Hit/Miss). Deshalb wird dessen Fähigkeit Defekte zu entdecken als Entdeckungswahrscheinlichkeit (POD Probability of Detection) ausgedrückt. In der herkömmlichen 'Signal Response' Signal-Antwort-Zuverlässigkeitsanalyse wird die Entdeckungswahrscheinlichkeit als eine Funktion der Defektgröße angegeben. Die Eignung des Prüfsystems wird durch den Vergleich der Größe des Defektes, der zuverlässig entdeckt wird, mit der des größten zulässigen Defektes, der die strukturelle Integrität nicht gefährdet, verifiziert. Analysen moderner Strukturen zeigen aber, dass auch andere Parameter den Schweregrad des Defektes bzgl. der Integrität der Struktur bestimmen können. Im Rahmen der Multi-Parameter-Zuverlässigkeitsanalyse kann die Entdeckungswahrscheinlichkeit als eine Funktion verschiedener Einflussparameter ausgedrückt werden. Wenn die Eignung des zerstörungsfreien Prüfsystems bestimmt wird, muss die Fähigkeit des Systems Defekte zu entdecken gegenüber dem kritischen Wert genau des Parameters ausgedrückt und geprüft werden, der den Schweregrad des Defektes für die Integrität der Struktur bestimmt. Die Nichterfüllung dieser Forderung kann zur Ablehnung von intakten Teilen oder der Akzeptanz von schlechten Teilen führen. Das Prinzip wird anhand von longitudinalen Ultraschall-Sende-Empfangs-Prüfdaten der Gußeisenmatrix mit oberflächenoffenen, semi-elliptischen, rißartigen Defekten demonstriert. KW - POD KW - TRL-UT PY - 2013 DO - https://doi.org/10.3139/120.110434 SN - 0025-5300 VL - 55 IS - 4 SP - 270 EP - 275 PB - Hanser CY - München AN - OPUS4-28829 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kolkoori, Sanjeevareddy A1 - Wrobel, Norma A1 - Osterloh, Kurt A1 - Redmer, Bernhard A1 - Deresch, Andreas A1 - Ewert, Uwe T1 - Hochenergieradiografie - Erkennung von Einzelheiten in großen, komplexen Schichttiefen N2 - Zur Durchstrahlung großer, dichter Objekte reichen die Energien, die mit normalen Röntgenröhren erzielt werden können, ab gewissen Schichtdicken nicht mehr aus. Als hochenergetische Strahlenquellen stehen Kobalt-60 und Elektronenbeschleuniger zur Verfügung. Als Einschränkung der Hochenergieradiografie ist der geringere Kontrast besonders beim Vorhandensein leichterer Objekte umgeben von Körpern bestehend aus schweren Elementen anzusehen. Es ist daher zu erwarten, dass Objekte aus organischen Substanzen hinter dicken Schwermetallwänden oder in Bohrungen von Metallblöcken schwer zu erkennen sind. Im Unterschied zu einem Gammastrahler wie Kobalt-60 mit den beiden Spektrallinien um 1,3 MeV besitzt die Bremsstrahlung aus einem Beschleuniger einen wesentlichen Anteil an niederenergetischer Strahlung, der fließend zu höheren Energien übergeht. Es wird hier untersucht, welche Signaturen von leichten Materialien in einer Umgebung aus Schwermetall bis zu welcher Dicke und bis zu welchem Komplexitätsgrad erkennbar sind. Mit einem Betatron (JME X-ray Betatron 7,5 MeV) und einem Matrixdetektor (Perkin Elmer XRD 1621) wurden Aufnahmen von unterschiedlichen leichten Objekten angefertigt, die zunehmend in eine Umgebung aus Schwermetallen gestellt wurden. Mit unterschiedlichen Energieeinstellungen wurde untersucht, inwieweit eine Materialerkennung hinter welcher Abschirmung möglich ist. Die experimentellen Ergebnisse werden mit Simulationen verglichen, die mit einer Software zur Modellierung von Durchstrahlungsverfahren (aRTist) erzeugt wurden. Dabei wird dem Problem der Aufhärtung bei Anwendung von Bremsstrahlung Rechnung getragen. Die Ergebnisse können sowohl zur Erkennung von Fremdkörpern in Maschinen oder Pumpen als auch zur Überprüfung von Frachtladungen im Bereich der öffentlichen Sicherheit und bei Zollkontrollen dienen. KW - Hochenergieradiographie KW - Containerprüfung KW - Materialerkennung PY - 2013 DO - https://doi.org/10.3139/120.110492 SN - 0025-5300 VL - 55 IS - 9 SP - 683 EP - 688 PB - Hanser CY - München AN - OPUS4-29057 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bertovic, Marija A1 - Fahlbruch, B. A1 - Müller, Christina A1 - Pitkänen, J. A1 - Ronneteg, U. A1 - Gaal, Mate A1 - Kanzler, Daniel A1 - Ewert, Uwe A1 - Schombach, D. T1 - Human factors approach to the acquisition and evaluation of NDT data N2 - This paper gives an introduction to the field of human factors with the focus on their influence on the reliability of NDT in the nuclear energy production (in-service inspections) and final storage of highly radioactive nuclear waste. A set of methodological tools has been developed in the scope of three projects, namely: 1) a theoretical model describing potential human factors influencing manual ultrasonic inspection performance during inservice inspections in nuclear power plants; 2) a method for identifying potential human errors during acquisition and evaluation of data gathered with mechanized ultrasonic, radiographic and eddy-current systems, as well as visual testing with a remote camera (Failure Modes and Effects Analysis, FMEA); and 3) use of eye tracking methodology to optimize existing procedures and practices. The experimental results have shown that time pressure, mental workload and experience influence the quality of the inspection performance. Noticeable were influences from the organization of the working schedule, communication, procedures, supervision and demonstration task. Implementing human redundancy in critical tasks, such as defect identification, as well as using an automated aid (software) to help operators in decision making about the existence and size of defects, could lead to other kinds of problems, namely social loafing (excerpting less effort when working on tasks collectively as compared to working alone) and automation bias (uncritical reliance on the proper function of an automated system without recognizing its limitations and the possibilities of automation failure) that might affect the reliability of NDT in an undesired manner. T2 - 18th WCNDT - World conference on nondestructive testing CY - Durban, South Africa DA - 16.04.2012 KW - Human Factors KW - Time Pressure KW - 4-Eye Principle KW - Automation Bias KW - Nuclear Waste Storage KW - In-Service Inspection (ISI) KW - Nuclear Power Plants KW - Eye Tracking KW - Failure Modes and Effects Analysis (FMEA) PY - 2012 SN - 978-0-620-52872-6 SP - 1 EP - 10 (Paper 198) AN - OPUS4-27583 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wrobel, Norma A1 - Kolkoori, Sanjeevareddy A1 - Osterloh, Kurt A1 - Ewert, Uwe ED - Lauster, M. T1 - High energy X-ray radiography: detection of dangerous materials in cargo containers N2 - For the radiographic investigation of large cargo Containers the energies of conventional Xray tubes are inadequately for certain layer thicknesses. In that case the high energy radiation sources like electron accelerators and gamma radiators (60CO) are adequate for the non invasive inspection of large Containers because of the high penetration through thick materials. Multiple imaging even enables to distinguish between different materials. The main challenging task in air and sea cargo Container inspection is to improve the detectability of contraband and dangerous materials which are hidden in the heterogeneously packed Containers by detailed analysis of cluttered radiographic images. So it is to be expected that objects of organic substances like certain explosives or their precursors are hard to identify behind thick walls of heavy metal objects such as engine-blocks with flat bottom holes. The primary aim here is to investigate the detectability of dangerous materials (typically of light elements) in cargo Containers using high energy X-ray digital radiography. T2 - 8th Future security research conference CY - Berlin, Germany DA - 17.09.2013 KW - Hochenergieradiographie KW - Containerprüfung KW - Materialerkennung PY - 2013 SN - 978-3-8396-0604-9 SP - 461 EP - 462 PB - Fraunhofer Verlag AN - OPUS4-29326 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Redmer, Bernhard A1 - Onel, Yener A1 - Ewert, Uwe T1 - Mechanised radiation techniques - an innovative technique of the mobile in-service inspection of circumferential welds T2 - 3rd International Conference "Pipeline Diagnostics" CY - Moscow, Russia DA - 2001-05-21 PY - 2001 SP - I34 AN - OPUS4-1176 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Osterloh, Kurt A1 - Ewert, Uwe T1 - Anwendung von Röntgenblitzröhren T2 - BAM-Workshop 2001 CY - Berlin, BAM, Deutschland DA - 2001-04-26 PY - 2001 AN - OPUS4-1180 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Redmer, Bernhard A1 - Onel, Yener A1 - Ewert, Uwe A1 - Lunin, V. A1 - Podobedov, D. T1 - Mechanisierte Durchstrahlungsprüfung - Innovative Techniken zur Bewertung von Rundschweißnähten T2 - Tagung Schweißen und Schneiden ; Große Schweißtechnische Tagung CY - Essen, Deutschland DA - 2001-09-11 PY - 2001 SN - 3-87155-674-2 N1 - Serientitel: DVS-Berichte – Series title: DVS-Berichte IS - 216 SP - 243 EP - 247 PB - Verl. für Schweißen und Verwandte Verfahren, DVS-Verl. CY - Düsseldorf AN - OPUS4-1162 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Osterloh, Kurt A1 - Ewert, Uwe T1 - Characterization of explosive devices by radiological methods T2 - MATEST 2001 "Non-Destructive Testing in Environmental Protection" CY - Cavtat-Dubrovnik, Croatia DA - 2001-09-23 KW - Unexploded ordnance (UXO) KW - Explosive ordnance disposal (EOD) KW - Improvised explosive devices (IED) KW - Radiological inspection KW - Image processing PY - 2001 SP - 15 EP - 26 AN - OPUS4-1163 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ewert, Uwe A1 - Redmer, Bernhard A1 - Likhachov, A. A1 - Pickalov, V. T1 - Influence of Unsharpness on Crack Length Evaluation with Computerized Tomography Methods T2 - 2nd World Congress on Industrial Process Tomography CY - Hannover, Germany DA - 2001-08-29 KW - Crack inspection KW - X-ray-tomography KW - Crack overshoot PY - 2001 SN - 0-85316-224-7 VL - 2 IS - Appendix 1 SP - 711 EP - 718 PB - Virtual Centre for Industrial Process Tomography CY - [Manchester] AN - OPUS4-1150 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Stade, Jürgen A1 - Ewert, Uwe A1 - Strauch, Monika A1 - Lotze, Gert T1 - Erfahrungen aus einem Ringversuch zur Vorbereitung einer Revision der Norm EN 584, Industrielle Filme für die Durchstrahlungsprüfung - Teil 1: Klassifizierung von Filmsystemen für die industrielle Durchstrahlungsprüfung T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2002 CY - Weimar, Deutschland DA - 2002-05-06 PY - 2002 SN - 3-931381-39-0 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 80-CD PB - DGZfP CY - Berlin AN - OPUS4-1443 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Stade, Jürgen A1 - Ewert, Uwe A1 - Strauch, Monika A1 - Lotze, Gert T1 - Erfahrungen aus einem Ringversuch zur Vorbereitung einer Revision der Norm EN 584 - Teil 1 N2 - Zusammenfassung Für die kennzeichnenden Größen eines industriellen Röntgenfilmsystems sind in der Norm EN 584-1 Grenzwerte für die Zugehörigkeit zu einer Filmsystem-Klasse sowie Messvorschriften für die Bestimmung der Kennwerte angegeben. Diese Messvorschriften erwiesen sich in der Praxis als zu großzügig gefasst. Der Ringversuch, an dem Filmhersteller und die BAM im Rahmen einer Ad Hoc Group der WG1 des CEN TC 138 teilnahmen, bestätigte das mit seinen beträchtlich voneinander abweichenden Ergebniswerten. Aus seinen Ergebnissen können Hinweise für präzisierte Messvorschriften und Algorithmen entnommen werden. Zusammen mit unabhängig davon durchgeführten Stichproben-Messungen der BAM an Filmsystemen vom Markt geben die Ergebnisse des Ringversuchs Hilfe für die Korrektur von Klassengrenzen der Norm. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2002 CY - Weimar, Deutschland DA - 2002-05-06 KW - Filmklassifizierung KW - Ringversuch KW - Messvorschriften KW - EN 584-1 PY - 2002 UR - http://www.ndt.net/article/dgzfp02/papers/p16/p16.htm SN - 3-931381-39-0 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 80-CD SP - 1 EP - 9(?) PB - DGZfP CY - Berlin AN - OPUS4-1444 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Redmer, Bernhard A1 - Ewert, Uwe A1 - Hofmann, E. A1 - Neundorf, B. T1 - New System for Mechanised X-Ray Inspection of Welded Austenic Pipes N2 - One of the most important tasks for in-service weld inspection of Circumferential welds is the detection of planar defects and its sizing. The information about the shape, length and depth of defects like cracks and lack of fusion can be measured quantitatively with a mechanised system for manipulation of X-ray source and line camera. The well adjusted manipulation system allows the testing of pipes with a diameter between 176 mm and 500 mm. The system is based on several modules, which can be adjusted to the testing problem. The energy of the X-ray tube amounts 225 keV. The pixel resolution of the line camera is 50µm for 2048 pixels per line. The camera and the X-ray tube are separated on the pipe by an angle of 180°. They are moved line by line around the circumference to acquire the radiometric image. The basic problem of radiography as well as of the radiometric scan technique is the dependence of the measured crack contrast on the radiation direction in relation to the crack location. Only parallel transmission to the crack plane provides sufficient contrast. This requires application of the multi-angle technique. The developed scanner enables modification of the radiation direction. It is possible to set up the system for a special inspection of side wall flaws. Scanning the weld under different angles provides multi -angle projections which improve the probability of detection for planar inhomogeneities in the material like cracks and lack of fusion. Furthermore, the multi-angle technique provides enough information for a 3D-reconstruction of the weld structure. New methods of digital laminography and tomosynthesis permit the measurement of the shape and depth of the indications. The developed system, which is applicable for mobile in service inspection, is presented together with the results of the measurement techniques like planar scan, coplanar laminography, tomosynthesis and cross-sectional planar tomography. T2 - 3rd International Conference on NDE in Relation to Structural Integrity for Nuclear and Pressurized Components CY - Seville, Spain DA - 2001-11-14 PY - 2001 UR - http://www.ndt.net/abstract/ndesi01/data/51.htm SP - 52 EP - 60 CY - Seville AN - OPUS4-1903 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Redmer, Bernhard A1 - Robbel, Joachim A1 - Ewert, Uwe A1 - Vengrinovich, Valery T1 - Mechanised weld inspection by tomographic computer aided radiometry (TomoCAR) T2 - 8th European Conference on NDT CY - Barcelona, Spain DA - 2002-06-17 PY - 2002 UR - http://www.ndt.net/article/ecndt02/308/308.htm SN - 1435-4934 VL - 44 IS - 9 SP - 564 EP - 567 PB - NDT.net CY - Kirchwald AN - OPUS4-1904 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Osterloh, Kurt A1 - Ewert, Uwe A1 - Pries, A.R. T1 - Interaction of albumin with the endothelial cell surface KW - Electron spin resonance KW - Molecular mobility KW - Endothelial surface layer PY - 2002 SN - 0002-9513 VL - 283 SP - H398 EP - H405 PB - American Physiological Society CY - Bethesda, Md. AN - OPUS4-1980 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Osterloh, Kurt A1 - Ewert, Uwe T1 - EFNDT WG5 APMD, achievements and future tasks N2 - The existence of some 100 million active mines threatens human life and curtails substantially the economic base in over 70 countries. Humanitarian demining is tedious and it currently only employs metal detectors, prodders, dogs and armoured mechanical vehicles. Achieving a world free of mines within a period of 10 years as stipulated in international treaties requires safer and more efficient technologies. In response to this challenge the Working Group 5 of the European Federation for Non-Destructive Testing (EFNDT WG5) was founded in Berlin in March 1999. The subject of this working group now consisting of 50 members from 17 countries is the detection of antipersonnel mines (APMD). The basic idea was to investigate existing NDT methods into their ability to aid mine detection. The scope of activities ranged from collecting available information, setting up links to related organisation, defining terminology and standards to selecting dedicated research projects. Since some of these tasks are already conducted by other organisations on an European and international level the attention of the working group has been focused mainly on two R&D areas and on reliability assessment studies. Otherwise, EFNDT WG5 APMD nevertheless remains open to novel approaches in mine detection. Aim of all activities is to provide deminers with safer and more efficient tools than merely with prodders and metal detectors currently used for their dangerous task. T2 - 8th ECNDT CY - Barcelona, Spain DA - 2002-06-17 PY - 2002 UR - http://www.ndt.net/article/ecndt02/455/455.htm SP - 1 EP - 10 PB - European Federation for Non-Destructive Testing CY - Barcelona AN - OPUS4-1981 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Osterloh, Kurt A1 - Ewert, Uwe T1 - Technologies and Recent Developments to Inspect Suspicious Objects (Principles) T2 - EFNDT Working Group 5 - for Antipersonnel Mines Detection CY - Zagreb, Croatia DA - 2002-03-04 PY - 2002 VL - 5 SP - 1 EP - 4 AN - OPUS4-1982 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Redmer, Bernhard A1 - Warrikhoff, A. A1 - Ewert, Uwe T1 - Miniatur-Röntgenröhre für die mobile Rohrprüfung N2 - Zusammenfassung Der Prototyp einer Flachröntgenröhre mit einer maximalen Röntgenenergie von 240kV (600W) und einer Brennfleckgröße von 0,4 * 0,4 mm nach DIN EN 12543 wird vorgestellt. Das Design dieser Flachröntgenröhre mit geringer Aufbauhöhe ist in Metall-Keramik-Technik ausgeführt. Die Beschleunigungsstrecke Katode-Anode ist senkrecht zur Haubenachse ausgeführt. Die Röhre ist als bipolares System aufgebaut. Kleine Durchmesser der Hochspannungskabel verringern das Gewicht und resultierende Kraftmomente bei der manuellen Manipulation sowie beim Verfahren in einem mechanisierten System. Der Targetwinkel beträgt 6° und bewirkt eine höhere Brillianz der Röntgenstrahlung. Die Geometrie des Strahlenaustrittsfensters (Emissionsfenster) ist in Fächerstrahlgeometrie zur tomografischen Prüfung ausgelegt. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2002 CY - Weimar, Deutschland DA - 2002-05-06 PY - 2002 UR - http://www.ndt.net/article/dgzfp02/papers/v02/v02.htm SN - 3-931381-39-0 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 80-CD PB - DGZfP CY - Berlin AN - OPUS4-1994 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Beckmann, Jörg A1 - Osterloh, Kurt A1 - Malitte, Hans-Joachim A1 - Ewert, Uwe T1 - Radiographic Imaging for Assessment of UXO, Suspected of Chemical Warfare Material N2 - Radiography is a helpful method to identify the inherent structure of unexploded ordnances (UXO’s). Portable Computed Radiography (CR) systems on the basis of phosphor imaging plates , have attracted attention for NDT-applications during the last few years. A portable IP system “ACR 2000” has been tested for X-ray inspection of UXO's in the field. Digitised radiographs are presented to explain the needs and demands for a reliable characterisation of UXO's. Computed radiographs of UXO’s are compared with film radiographs exposed in the same way, to evaluate the reliability and to identify advantages and disadvantages of the CR system for UXO inspection. Film based and CR systems provide sufficient information for identification of chemical warfare agents in UXO's, which is an essential problem for explosive ordnance disposal. The advantages and the potential of the portable CR system is discussed on the basis of experiences gathered during different field trails. T2 - 8th ECNDT CY - Barcelona, Spain DA - 2002-06-17 PY - 2002 UR - http://www.ndt.net/article/ecndt02/146/146.htm PB - European Federation for Non-Destructive Testing CY - Barcelona AN - OPUS4-1996 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Christina A1 - Elagin, Mstislav A1 - Rosenthal, Martina A1 - Redmer, Bernhard A1 - Ewert, Uwe A1 - Schafer, Lloyd A1 - Wilrich, Peter-Th. T1 - Reliability Investigation of NDE Systems by Modular Analysis of Recorded Data N2 - During the second European-American Workshop on NDE Reliability, September 99 in Boulder, the term NDE reliability was defined as the degree that an NDT system is capable of achieving its purpose regarding detection, characterization and false calls. The most common – but also most expensive - way to determine this degree of capability in e.g. defect detection is to make just a performance demonstration using realistic test samples and to count the correct detections and false calls. For a more efficient way of reliability evaluation we propose to decompose the system into main modules e.g. according to the reliability formula set up on the first workshop: into f(IC) – a function of IC the intrinsic capability, determined by the physics and the technique of the NDE method representing an ideal upper bound of the reliability and g(AP) – a function of AP the industrial application factor like surface state or limited access to a component in general diminishing the ideal capability and finally h(HF) the function of the human factor which is in general also diminishing the ideal capability. The workshop proposed a rather plain mathematical shape for the formula R = f(IC) – g(AP) – h(HF) which should be considered merely as a “philosophical” expression but not as exact mathematical formula to be applied for evaluation of e.g. POD data. We propose to decompose the NDE system into modules in terms of functions of IC, AP and HF if appropriate or additional ones if necessary and then to analyze the mutual relationships of the terms via fault tree analysis. Finally the total reliability of the system is composed of the reliability of the subsystems via the rules of statistical systems theory. First trials for this approach of data analysis will be presented via examples from NDE systems in the aerospace industry. T2 - 8th ECNDT CY - Barcelona, Spain DA - 2002-06-17 PY - 2002 UR - http://www.ndt.net/article/ecndt02/428/428.htm N1 - Geburtsname von Rosenthal, Martina: Scharmach, M. - Birth name of Rosenthal, Martina: Scharmach, M. VL - 8 SP - 1(?) EP - 14(?) PB - European Federation for Non-Destructive Testing CY - Barcelona AN - OPUS4-2013 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Christina A1 - Ewert, Uwe A1 - Rosenthal, Martina A1 - Völker, J. A1 - Schafer, Lloyd A1 - Wilrich, Peter-Th. T1 - Concepts in reliability measurement T2 - European-American Workshop 2002 CY - Berlin, BAM, Germany DA - 2002-09-11 PY - 2002 N1 - Geburtsname von Rosenthal, Martina: Scharmach, M. - Birth name of Rosenthal, Martina: Scharmach, M. SP - 1 EP - 9 AN - OPUS4-2018 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Osterloh, Kurt A1 - Ewert, Uwe T1 - Bedrohung durch Minen, können zerstörungsfreie Prüfmethoden zur Beseitigung beitragen? PY - 2002 SN - 1616-069X SN - 0948-5112 PB - Deutsche Gesellschaft für Zerstörungsfreie Prüfung CY - Berlin AN - OPUS4-2009 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Christina A1 - Ewert, Uwe A1 - Rosenthal, Martina A1 - Völker, J. A1 - Schafer, Lloyd T1 - Das Basisanliegen von Zuverlässigkeitsuntersuchungen und eine Momentaufnahme im internationalen Geschehen N2 - Das Basisanliegen - Einleitung Mit der zunehmenden Zahl akkreditierter ZfP-Firmen und zunehmender Anwendung risikobasierender Konzepte ergibt sich die Notwendigkeit, internationale Standards wie die DIN EN ISO 17025 und darüber hinausgehende Richtlinien bei der Verfahrensauswahl in der ZfP zu berücksichtigen. Dieser Aufsatz soll aufzeigen, welche internationalen Aktivitäten gegenwärtig für die Zuverlässigkeitsbetrachtungen von Bedeutung sind (siehe auch [1]). In Übereinstimmung mit den Vereinbarungen und Definitionen der European-American Workshops zur Zuverlässigkeit [2, 3] gilt: Das Basisanliegen der Zuverlässigkeitsuntersuchungen beliebiger diagnostischer Systeme besteht darin, den Grad festzustellen mit dem das Prüfsystem in der Lage ist, seinen vorgesehenen Zweck zu erfüllen. Im Falle der ZfP besteht dieser Zweck zumeist in der Aufgabe, Bauteildefekte aufzufinden und zu beschreiben bzw. die Defektfreiheit von Bauteilen zu bestätigen, sowie Wanddicken zu messen oder Material zu charakterisieren. Das Basisanliegen der Zuverlässigkeitsuntersuchungen findet seinen Niederschlag bei folgenden international relevanten Aktivitäten: neue ISO 17025 als Notwendigkeit mit variablen Möglichkeiten der Verfahrensvalidierung als Kettenglied in RBLM (Risk Based Life Time Management) (r) EPERC-Initiative CEN/TC138/WG9 "Qualifizierung von ZfP-Verfahren" Six-Sigma Strategie: als notwendiger Bestandteil ASNT-Initiative: Standing Committee on NDE Reliability: als Arbeitspaket Produkthaftung: als notwendige Voraussetzung für die Handhabung T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2002 CY - Weimar, Deutschland DA - 2002-05-06 PY - 2002 UR - http://www.ndt.net/article/dgzfp02/papers/v29/v29.htm SN - 3-931381-39-0 N1 - Geburtsname von Rosenthal, Martina: Scharmach, M. - Birth name of Rosenthal, Martina: Scharmach, M. N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 80-CD PB - DGZfP CY - Berlin AN - OPUS4-2010 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Christina A1 - Ewert, Uwe A1 - Rosenthal, Martina A1 - Bär, Sylke A1 - Schafer, Lloyd A1 - Völker, J. A1 - Wilrich, Peter-Th. T1 - Current status in the area of reliability of non-destructive testing and demining: Experience in Europe and USA T2 - Reliability and Diagnostics of Transport Structures and Means, Pardubice - Czech Republic CY - Pardubitz, Tschechische Republik DA - 2002-09-26 KW - Reliability of NDE Systems KW - Performance Demonstration KW - Essential Parameters KW - European Standards KW - Radiographic Testing KW - Film Digitalization KW - Austenitic Tube Welds KW - ROC KW - POD PY - 2002 SN - 80-7194464-5 SP - 1 EP - 14(?) PB - Univ. CY - Pardubice AN - OPUS4-2011 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ewert, Uwe T1 - Digital X-ray cross laminography for evaluation of crack fields in large concrete blocks after impact N2 - - Impact tests of concrete blocks - High energy facility for laminographic testing - Laminographic arrangement - Cross-Laminography - Measurement range extension by detector tiling - Reconstruction methods - Fast “shift averaging” method “next to base plane” - reconstruction --> Removal of reinforcement indications - 3D-Data analysis - Crack-Segmentation by „Template Matching“ T2 - General Assembly of Academia NDT International CY - Brescia, Italy DA - 13.10.2017 KW - Digital X-ray laminography KW - Evaluation of crack fields KW - Large concrete blocks KW - Impact test PY - 2017 AN - OPUS4-43432 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Redmer, Bernhard A1 - Likhatchev, A. A1 - Weise, Frank A1 - Ewert, Uwe T1 - Location of Reinforcement in Structures by Different Methods of Gamma-Radiography N2 - The quantitative measurement of kind, positions and diameters of steel reinforce ments in building constructions is a typical inspection problem in civil engineering. A classical solution is the combination of film radiography with the multi angle technique and graphical backprojection. New digital detectors reduce the exposure time and allow the application of stereo radiography and computed laminography as routine applications. The computed laminography allows fast and effectively the determination of the depth of reinforcements in concrete or masonry. A selected area of the steel re-bar structure is penetrated by gamma-rays from different angles of incidence (multi angle-technique) with a Co-60-source. Instead of a radiographic film phosphor imaging plates were used as a new digital medium for filmless radiography. A 3D-image of the measured region of interest is reconstructed from the digitised projections of a test block. The reconstruction is based on special tomosynthesis algorithms which need few projections only. Radiographic techniques were uses in completion to other techniques like radar, electromagnetic alternating field inspection to examine the structure of different buildings. Experiences of inspections of historical buildings, ancient marble structures and a bridge girder are presented where different levels of radiography were applied. T2 - 6th International Symposium Non-Destructive Testing in Civil Engineering (NDT-CE) CY - Berlin, Germany DA - 2003-09-16 PY - 2003 UR - http://www.ndt.net/article/ndtce03/papers/v020/v020.htm SN - 3-931381-49-8 SP - 1(?) EP - 11(?) PB - DGZfP CY - Berlin AN - OPUS4-2779 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Weise, Frank A1 - Patitz, G. A1 - Redmer, Bernhard A1 - Hübner, M. A1 - Haamkens, Frank A1 - Ewert, Uwe ED - Wittmann, F. H. ED - Gerdes, A. T1 - Kombination zerstörungsfreier Prüfverfahren zur Strukturaufklärung in antiken Baudenkmälern T2 - MSR-VI ; 6th International Conference on Materials Science and Restoration ; 6th Internationales Kolloquium Werkstoffwissenschaften und Bauinstandsetzen CY - Karlsruhe, Deutschland DA - 2003-09-16 KW - Antikes Baudenkmal KW - Strukturaufklärung KW - Lokalisierung von metallischen Einbauteilen und Hohlstellen KW - Kombinierter Einsatz zerstörungsfreier Prüfverfahren KW - Radar KW - Videoskopie KW - Radiografie PY - 2003 SN - 3-931681-76-9 IS - 6 SP - 359 EP - 370 PB - Aedificatio-Verl. CY - Freiburg AN - OPUS4-2817 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Redmer, Bernhard A1 - Weise, Frank A1 - Ewert, Uwe A1 - Patitz, G. T1 - Kombinierter Einsatz zerstörungsfreier Prüfverfahren zur Bauzustandsanalyse antiker Baudenkmäler im Pergamonmuseum Berlin T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2004 CY - Salzburg, Austria DA - 2004-05-17 KW - Zerstörungsfreie Prüfung KW - Radar KW - Videoskopie KW - Radiografie KW - Bauzustandsanalyse KW - Baudenkmal PY - 2004 UR - http://www.ndt.net/article/dgzfp04/papers/p38/p38.htm SN - 3-931381-55-2 SP - 1(?) EP - 10(?) PB - DGZfP CY - Berlin AN - OPUS4-5224 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -