TY - CONF A1 - Niederleithinger, Ernst T1 - Current Use of NDT-CE For Infrastructure Inspection and Monitoring in Germany N2 - This presentation gives an overview on current use of NDT-CE for infrastructure inspection and monitoring in Germany. It reflects on challenges, applied standards and guideline including currently developed upgrades. Ways to select proper NDT methods are shown as well as a way how to use NDT results in quantitative, probabilistic strctural assessment. T2 - ISNT NDE2024 Pre-Conference Tutorial on NDT-CE CY - Chennai, India DA - 11.12.2024 KW - NDT-CE KW - Inspection KW - Assessment KW - Standards KW - Guidelines PY - 2024 AN - OPUS4-62197 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Niederleithinger, Ernst T1 - NDT-CE Qualification and Certification in Germany and Elsewhere N2 - Recently first qualification and certification schemes for NDT-CE testing personnel have been introduced and are well booked. The presentation focuses on the two level scheme recently put into standards in Germany. International activities, which favor the traditional three level ISO 9712 scheme, are also discussed. T2 - ISNT NDE2024 Pre-Conference Tutorial on NDT-CE CY - Chennai, India DA - 11.12.2024 KW - NDT-CE KW - Inspection KW - Qualification KW - Certification PY - 2024 AN - OPUS4-62198 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Niederleithinger, Ernst T1 - Paths towards digitalization in NDT for Civil Engineering N2 - This presentation shows the concepzual way how to intergrate NDT results into BIM, Digital Twins and more. The concept of BIM, Digital Twins and exchange data formats such as DICONDE and IFC (industry Foundation Classes) are explained. Two examples for Digital Twins are shown. T2 - ISNT NDE 2024 CY - Chennai, India DA - 12.12.2024 KW - NDT-CE KW - Digitalization KW - BIM KW - Digital Twin KW - DICONDE PY - 2024 AN - OPUS4-62202 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Niederleithinger, Ernst ED - Meyendorf, Norbert ED - Ida, Nathan ED - Singh, Ripi ED - Vrana, Johannes T1 - NDE 4.0 in Civil Engineering N2 - There is a tremendous potential for NDE-CE due to the current changes in the construction industry. On the way to a digitized and digitalized way of work, including a shift from traditional ways of planning towards building information modeling, NDE-CE can be of help by providing quality assurance data during and directly after construction, condition data during operation, and missing information about older constructions before rehabilitation or demolition. However, to be successful, NDE-CE methods must be integrated into the data structures used by designers, planners, builders, owners, and users: it must go digital as well. Formats,interfaces, and reliable trusted storage sites for NDE-CE data are urgently required. A working group at DGZfP (“AG ZfPBau 4.0”) and various research project and initiatives are working on these issues but still must get more momentum. KW - NDT-CE KW - NDE 4.0 KW - Digitalization KW - BIM KW - Diconde PY - 2024 SN - 978-3-030-48200-8 DO - https://doi.org/10.1007/978-3-030-48200-8_1-2 SP - 1 EP - 17 PB - Springer CY - Cham AN - OPUS4-62199 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Niederleithinger, Ernst T1 - Elastic Reverse Time Migration for Improved Ultrasonic Imaging of Concrete Constructions N2 - The ageing concrete infrastructure worldwide requires a thorough inspection and assessment. The traditional visual and tap testing methods required by many national and international standard have been meanwhile amended by more sophisticated tools like ultrasonic or radar echo technologies. While they can provide a much more detailed image of the interiors of concrete constructions, there are still several unsolved testing tasks on the wish list, such as the reliable sizing of internal objects, e.g. tendon ducts. Reverse Time Migration (RTM) is an imaging technique which is in use in the oil and gas industry for the exploration of new resources with seismic waves as a standard tool. Since about ten years there has been R&D effort to use RTM for imaging of ultrasonic echo data. As it uses the entire wavefield, RTM has some advantages compared to traditional SAFT, e.g. the ability to image vertical structures or the backside of objects. However, this comes with the cost of having to perform full wavefield simulations. We have adopted, improved, and used open source 2D full elastic codes (P/SV waves and SH waves) from geophysics to evaluate the capabilities and limitations of RTM for the imaging of certain features in concrete constructions. We can show the advantages of SH-wave RTM in comparison to SAFT, acoustic RTM and P/SV-based RTM. The findings are demonstrated based on simulated and real data, using a reference test specimen available at BAM. Position and diameter of tendon ducts have been determined with a sub-cm accuracy. T2 - ISNT NDE 2024 CY - Chennai, India DA - 12.12.2024 KW - NDT-CE KW - Ultrasound KW - Imaging KW - Reverse Time Migration KW - Concrete KW - RTM PY - 2024 AN - OPUS4-62203 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dominguez-Bureos, Marco A1 - Sens-Schönfelder, Christoph A1 - Niederleithinger, Ernst A1 - Hadziioannou, Céline T1 - Stress- and Time-dependent Variations of Elastic Properties for Integrity Assessment in a Reinforced Concrete Test Bridge N2 - In lab experiments, it has been observed that the stress–and time-dependent elastic properties of a complex material at a structural scale perform accordingly to its composition at a microstructural level. We seek complementary practices to the current wavefield-based non-destructive testing techniques to assess not only the integrity level of civil structures but also the microstructural elements that contribute to it. In this paper, we study the systematic evolution of elastic properties of concrete as an alternative to investigate the density of micro imperfections in an outdoor-conditioned concrete structure. We estimate 5-second relative velocity changes in four locations on a Test bridge subjected to the action of vertical impulsive sources, at different prestressing levels (dynamic effects at different static conditions). We describe the structure’s stress- and time-dependent elastic response by means of acoustoelastic effect and Slow-dynamic processes, respectively. We also estimate the conventional ultrasound pulse velocity and perform a cooperative integrity analysis of the structure using the three elastic phenomena. Our findings reveal: 1) The presence of soft microstructures and their orientation’s influence on the acoustoelastic effect and Slow-dynamics in field-conditioned concrete structures. 2) The relation of low ultrasound pulse velocities with high acoustoelastic effect and high magnitudes and variability of Slow-dynamics. 3) Different elastic behaviours on the north and south spans of the bridge, suggesting different heterogeneity levels on the analysed locations of the concrete beam. KW - Concrete KW - Ultrasound KW - Nonlinear KW - Elastic properties KW - Damage PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-640064 DO - https://doi.org/10.1007/s10921-025-01257-y SN - 0195-9298 VL - 44 IS - 4 SP - 1 EP - 16 PB - Springer Science and Business Media LLC AN - OPUS4-64006 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Niederleithinger, Ernst T1 - X-rays without X-rays: Can muon tomography provide pictures from within concrete and other objects? N2 - Until the 1980s radiography was used to inspect civil structures in case of special demands and showed a much better resolution than other NDT techniques. However, due to safety concerns and cost issues, this method is almost never used anymore. Meanwhile, non-destructive techniques such as ultrasound or radar have found regular, successful practical application but sometimes suffer from limited resolution and accuracy, imaging artefacts or restrictions in detecting certain features when applied to reinforced or prestressed concrete inspection. Muon tomography has received much attention recently. Muons are particles generated naturally by cosmic rays in the upper atmosphere and pose no risk to humans. Novel detectors and tomographic imaging algorithms have opened new fields of application, mainly in the nuclear sector, but also in spectacular cases such as the Egyptian pyramids. As a first step towards practical application in civil engineering and as a proof of concept we used an existing system to image the interior of a reference reinforced 600 kg concrete block. Even with a yet not optimized setup for this kind of investigation, the muon imaging results have been at least of similar quality compared to ultrasonic and radar imaging, potentially even better. Recently, the research was expanded to more realistic testing problems such as the detection of voids in certain structural elements. However, before practical implementation, more robust, mobile, and affordable detectors would be required as well as user-Friendly imaging and simulation software. The talk also discusses other applications , such as volcanology, mining and geothermal exploration. T2 - RWTH Aachen, Geophysikalisches Seminar CY - Aachen, Germany DA - 11.01.2024 KW - Muon tomography KW - Civil engineering KW - Mining KW - Geothermal engineering PY - 2024 AN - OPUS4-59349 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Niederleithinger, Ernst T1 - X-rays without X-rays: Can muon tomography provide pictures from within concrete objects? N2 - Until the 1980s radiography was used to inspect civil structures in case of special demands and showed a much better resolution than other NDT techniques. However, due to safety concerns and cost issues, this method is almost never used anymore. Meanwhile, non-destructive techniques such as ultrasound or radar have found regular, successful practical application but sometimes suffer from limited resolution and accuracy, imaging artefacts or restrictions in detecting certain features when applied to reinforced or prestressed concrete inspection. Muon tomography has received much attention recently. Muons are particles generated naturally by cosmic rays in the upper atmosphere and pose no risk to humans. Novel detectors and tomographic imaging algorithms have opened new fields of application, mainly in the nuclear sector, but also in spectacular cases such as the Egyptian pyramids. As a first step towards practical application in civil engineering and as a proof of concept we used an existing system to image the interior of a reference reinforced 600 kg concrete block. Even with a yet not optimized setup for this kind of investigation, the muon imaging results have been at least of similar quality compared to ultrasonic and radar imaging, potentially even better. Recently, the research was expanded to more realistic testing problems such as the detection of voids in certain structural elements. However, before practical implementation, more robust, mobile, and affordable detectors would be required as well as user-Friendly imaging and simulation software. T2 - ISNT NDE 2023 CY - Pune, India DA - 07.12.2023 KW - Muon tomography KW - Concrete KW - Civil engineering PY - 2023 AN - OPUS4-59347 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Niederleithinger, Ernst T1 - ridge Monitoring by Ultrasonic Coda Wave Interferometry N2 - The built infrastructure ages and requires regular inspection and, when in doubt, monitoring. To ensure that older concrete bridges showing signs of deterioration can be used safely, several innovative monitoring tools have been introduced, including but not limited to optical, fiber-optic, or acoustic emission techniques. However, there are gaps in the portfolio. A sensing technique that covers a wide range of damage scenarios and larger volumes, while still being sensitive and specific, would be beneficial. For about 15 years, research has been conducted on ultrasonic monitoring of concrete structures that goes beyond the traditional ultrasonic pulse velocity test (PV test), mostly using a very sensitive data evaluation technique called coda wave interferometry. At BAM we have developed sensors and instrumentation specifically for this method. We have instrumented a 70-year-old, severely damaged prestressed concrete bridge in Germany in addition to a commercial monitoring system. We have now collected data for almost 3 years. We can show that we can provide information about the stress distribution in the bridge. We have also been able to confirm that there has been no significant additional damage to the bridge since the installation. T2 - ISNT NDE 2023 CY - Pune, India DA - 07.12.2023 KW - Coda wave interferometry KW - Structural health monitoring KW - Ultrasound KW - Concrete KW - Bridges PY - 2023 AN - OPUS4-59346 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Niederleithinger, Ernst T1 - Zerstörungsfreie Prüfung von Betonkonstruktionen N2 - Der Vortrag behandelt den Stand der Technik bei der zerstörungsfreien Prüfung von Betonkonstruktionen und insbesondere den Stand und die Herausforderungen bei der Digitalisierung. Es werden Prüfaufgaben sowie etablierte Prüfmethoden und die passende Auswahl diskutiert. Ein weitere Schwerpunkt liegt bei der Genauigkeit und Verlässlichkeit und dem Konzept ZfPStatik. Abschließend werden Schnittstellen zu BIM, SIB-Bauwerke und anderen System kurz angerissen und ein Katalog offener Fragen aufgestellt. T2 - Workshop Digitale Bauwerkserhaltung inklusive Bauwerksdiagnose CY - Bonn, Germany DA - 20.02.2024 KW - ZfP-Bau KW - Beton KW - Bauwerksprüfung KW - Digitalisierung KW - ZfPStatik PY - 2024 AN - OPUS4-59547 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Chierici, Andrea A1 - Cancemi, Salvatore Angelo A1 - Niederleithinger, Ernst A1 - Lo Frano, Rosa T1 - Enhanced radioactive waste drum monitoring: A sensorized LoRa-based network for identification and integrity assessment N2 - A reliable monitoring and oversight system is essential to guarantee the safe operation and eventual closure of radioactive waste disposal facilities. With recent technological advancements, there is now the capability to deploy distributed wireless sensor networks that are cost-effective and low in power consumption. Such networks are versatile, finding applications in several civil, environmental, and industrial sectors. This work presents a novel system and method for identifying and continuously monitoring the integrity of stored radioactive waste packages. The proposed approach, developed by the University of Pisa in the context of the H2020 European Project PREDIS, employs a network of wireless node devices, provided with solid-state micro-power radiation detectors tasked with the measurement of gamma-rays and thermal neutrons coming from within cemented waste drums. Collected data are automatically transmitted across the storage site via Long Range radio technology and forwarded to cloud-based or offline platforms, allowing for further visualization, data processing, and safe storage. The system highlights the feasibility of autonomously and passively gathering data from radioactive waste drums over extended distances (more than 250 m in non-line-of-sight conditions), decreasing the reliance on portable or automated scanning mechanisms. In line with its capability for autonomous, long-range data collection, the system satisfies the requirement for structural integrity, containment, and confinement of packaging throughout both interim and long-term disposal of radioactive wastes, thereby playing a key role in reinforcing the safe management of radioactive waste. KW - Radioactive waste KW - Integrity monitoring KW - Radiation sensors KW - Cloud storage KW - LoRaWAN PY - 2024 DO - https://doi.org/10.1016/j.nucengdes.2024.113231 SN - 0029-5493 VL - 424 SP - 1 EP - 12 PB - Elsevier B.V. AN - OPUS4-60217 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Niederleithinger, Ernst T1 - Accuracy, Uncertainty, Probability of Detection N2 - This talk presents the concepts of measurement accuracy, uncertainty (in contrast to error analysis) an probability of detection for non-destructive testing. The relevant guidelines (GUM, Mil.Std.) are intrduced and practical examples given. T2 - USES2 Training Week 2 CY - Berlin, Germany DA - 24.06.2024 KW - Uncertainty KW - Pod KW - Measurements PY - 2024 AN - OPUS4-60467 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Skłodowska, Anna A1 - Lay, Vera A1 - Baensch, Franziska A1 - Niederleithinger, Ernst A1 - Kühne, Hans-Carsten T1 - Acoustic emission monitoring for engineered barriers in nuclear waste disposal N2 - To safely dispose of nuclear waste in underground facilities, engineered barrier systems are needed to seal shafts and galleries. The material used in these barriers must be adapted to the host rock parameters. Shrinking and cracking must be avoided to provide a barrier with almost zero permeability. For repositories in salt rock environments, several types of salt concrete (SC) are possible construction materials. Within the project SealWasteSafe, we compared the behavior of an innovative alkali-activated material (AAM) with standard SC in their hydration and hardening phase. To monitor the microstructural changes within the two materials SC and AAM, acoustic emission (AE) signals have been recorded for up to ~250 days on 340-liter-cubic specimens. The phenomenon of AE is defined as the emission of elastic waves in materials due to the release of localized internal energy. Such energy release can be caused by the nucleation of micro-fracture, e.g., in concrete while curing or when exposed to load. The occurrence of AE events gives first rough indications of microstructural changes and potentially occurring cracking and thus, provides insights for structural health monitoring (SHM). The results show, that for the first 28 days after casting, less AE activity was detected in the AAM compared to SC. After 61 days, in the AAM material, the number of AE events exceeded those observed in the SC. However, the majority of the AE detected and located in AAM was related to surface effects, and not to microstructural changes or occurring cracks within the bulk volume. Additionally, the source location analysis indicated, that despite lower activity in SC, we observed some clustering of the events. In contrast, in AAM, the activity inside the specimen is randomly distributed over the whole volume. The monitoring results help to estimate the material’s sealing properties which are crucial to assess their applicability as sealing material for engineered barriers. T2 - 11th European Workshop on Structural Health Monitoring (EWSHM 2024) CY - Potsdam, Germany DA - 10.06.2024 KW - Acoustic emission monitoring KW - Nuclear waste repositories KW - Event localization KW - SealWasteSafe project PY - 2024 AN - OPUS4-60552 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -