TY - GEN A1 - Dietlen, Siegmund A1 - Hieronymus, Hartmut A1 - Krause, Ulrich A1 - Plewinsky, Bodo A1 - Schröder, Volkmar A1 - Brandes, E. A1 - Redeker, T. ED - Steen, H. T1 - Sicherheitstechnische Kenngrößen von Gasen und Dämpfen von Flüssigkeiten PY - 2000 SN - 3-527-29848-7 SP - 319 EP - 375 PB - Wiley-VCH CY - Weinheim AN - OPUS4-1491 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Brandes, E. A1 - Dietlen, Siegmund A1 - Hieronymus, Hartmut A1 - Krause, Ulrich A1 - Plewinsky, Bodo A1 - Redeker, T. A1 - Schröder, Volkmar ED - Hattwig, M. T1 - Safety characteristics of gases and vapors PY - 2004 SN - 3-527-30718-4 SP - 271 EP - 323 PB - Wiley-VCH CY - Weinheim AN - OPUS4-5503 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Brandes, E. A1 - Dietlen, Siegmund A1 - Hieronymus, Hartmut A1 - Krause, Ulrich A1 - Plewinsky, Bodo A1 - Redeker, T. A1 - Schröder, Volkmar ED - Steen, H. T1 - Eigenschaften reaktionsfähiger Gase und Dämpfe von Flüssigkeiten (Kenngrößen) PY - 2000 SN - 3-527-29848-7 SP - 319 EP - 375 PB - Wiley-VCH CY - Weinheim AN - OPUS4-6893 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weiler, L. A1 - Pfingsten, J. A1 - Eickhoff, H. A1 - Geist, I. A1 - Hilbig, H. A1 - Hornig, U. A1 - Kalbe, Ute A1 - Krause, K. A1 - Kautetzky, D. A1 - Linnemann, V. A1 - Gschwendtner, M. A1 - Lohmann, D. A1 - Overeem-Bos, E. A1 - Schwerd, R. A1 - Vollpracht, A. T1 - Improving consistency at testing cementitious materials in the Dynamic Surface Leaching Test on the basis of the European technical specification CENTS 16637–2 – Results of a round robin test N2 - The environmental impact assessment of materials is usually based on laboratory tests, mostly in combination with models describing the longterm fate of the substances of interest in the targeted environmental compartment. Thus, laboratory tests are the fundamental link to achieve appropriate assessment conclusions which makes it essential to generate consistent results. This just as applies to the leaching of cementitious materials. In Europe, the leaching behavior of monolithic building materials is tested in the Dynamic Surface Leaching Test following the specification CEN/TS 16637–2. An interlaboratory comparison on European level regarding this technical specification showed relatively high intra- and interlaboratory variations for the tested materials (monolithic copper slag and cement stabilized coal fly ash). Therefore the German Committee for Structural Concrete (DAfStb) framed a guideline to specify additional testing conditions for cementitious materials. To assess the possible improvement by this guidelines measures, a round robin test with 11 participants from Germany and the Netherlands was conducted. This work aims to provide insight into the factors to be considered in the testing of alkaline materials, including sample preparation, and highlights crucial procedures and their manifestation in the results. All evaluated parameters showed improved results compared to the earlier round robin test. The relative standard deviations for repeatability (RSDr) and reproducibility (RSDR) of the elements calcium, barium, antimony, chromium, molybdenum and vanadium, which are the parameters evaluated in both round robin tests, were RSDr = 4%, 4%, 2%, 5%, 5%, and 5% respectively (4% in average) for this work, in comparison to the European round robin test with an average RSDr of 29% (17%, 17%, 20%, 40%, 36%, and 42%). The RSDR improved from 41% (30%, 36%, 29%, 57%, 40%, and 56%) to 14% (12%, 8%, 6%, 28%, 15%, and 12%). CO2 ingress during testing and the inaccuracy of eluate analytics for concentrations close to the determination limits were identified as the main sources of error. KW - Environmental assessment KW - Leaching KW - Heavy metals KW - Round robin test KW - Building Material PY - 2022 DO - https://doi.org/10.1016/j.jenvman.2022.114959 SN - 0301-4797 VL - 314 SP - 1 EP - 9 PB - Elsevier CY - Amsterdam AN - OPUS4-54647 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kityk, A.V. A1 - Busch, M. A1 - Rau, D. A1 - Calus, S. A1 - Cerclier, C.V. A1 - Lefort, R. A1 - Morineau, D. A1 - Grelet, E. A1 - Krause, Christina A1 - Schönhals, Andreas A1 - Frick, B. A1 - Huber, P. T1 - Thermotropic orientational order of discotic liquid crystals in nanochannels: an optical polarimetry study and a Landau-de Gennes analysis N2 - Optical polarimetry measurements of the orientational order of a discotic liquid crystal based on a pyrene derivative confined in parallelly aligned nanochannels of monolithic, mesoporous alumina, silica, and silicon as a function of temperature, channel radius (3–22 nm) and surface chemistry reveal a competition of radial and axial columnar orders. The evolution of the orientational order parameter of the confined systems is continuous, in contrast to the discontinuous transition in the bulk. For channel radii larger than 10 nm we suggest several, alternative defect structures, which are compatible both with the optical experiments on the collective molecular orientation presented here and with a translational, radial columnar order reported in previous diffraction studies. For smaller channel radii our observations can semi-quantitatively be described by a Landau–de Gennes model with a nematic shell of radially ordered columns (affected by elastic splay deformations) that coexists with an orientationally disordered, isotropic core. For these structures, the cylindrical phase boundaries are predicted to move from the channel walls to the channel centres upon cooling, and vice-versa upon heating, in accord with the pronounced cooling/heating hystereses observed and the scaling behavior of the transition temperatures with the channel diameter. The absence of experimental hints of a paranematic state is consistent with a biquadratic coupling of the splay deformations to the order parameter. PY - 2014 DO - https://doi.org/10.1039/c4sm00211c SN - 1744-683X VL - 10 IS - 25 SP - 4522 EP - 4534 PB - RSC Publ. CY - Cambridge AN - OPUS4-30866 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sieg, H. A1 - Lehmann, C. A1 - Kästner, Claudia A1 - Krause, B. A1 - Burel, A. A1 - Chevance, S. A1 - Böhmert, L. A1 - Lichtenstein, D. A1 - Tentschert, J. A1 - Bräuning, A. A1 - Laux, A. A1 - Thünemann, Andreas A1 - Loipis, I. E. A1 - Fessard, V. A1 - Luch, A. A1 - Lampen, A. T1 - Effects of Al-, Ti- and Zn-containing nanomaterials on cell lines in vitro N2 - Among the different tested endpoints, Al- and Ticontaining nanomaterials did notshowany toxicity in intestinal cell lines in vitro. Nevertheless, this absence of effect was not due to an absence of exposure, since particle-specific uptake was reported. Metal particle uptake over a long time period might therefore be relevant for risk assessment of aluminum- and titanium-containing food products. T2 - 52nd Congress of the European-Societies-of-Toxicology (EUROTOX) CY - Seville, Spain DA - 04.09.2017 KW - Nanoparticles PY - 2017 DO - https://doi.org/10.1016/j.toxlet.2016.06.1954 SN - 0378-4274 VL - 258 SP - S272 PB - Elsevier Ltd. AN - OPUS4-40939 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Juling, S. A1 - Niedzwiecka, A. A1 - Böhmert, L. A1 - Lichtenstein, D. A1 - Selve, S. A1 - Braeuning, A. A1 - Thünemann, Andreas A1 - Krause, E. A1 - Lampen, A. T1 - Protein Corona Analysis of Silver Nanoparticles Links to Their Cellular Effects N2 - The breadth of applications of nanoparticles and the access to food-associated consumer products containing nanosized materials lead to oral human exposure to such particles. In biological fluids nanoparticles dynamically interact with biomolecules and form a protein corona. Knowledge about the protein corona is of great interest for understanding the molecular effects of particles as well as their fate inside the human body. We used a mass spectrometry-based toxicoproteomics approach to elucidate mechanisms of toxicity of silver nanoparticles and to comprehensively characterize the protein corona formed around silver nanoparticles in Caco-2 human intestinal epithelial cells. Results were compared with respect to the cellular function of proteins either affected by exposure to nanoparticles or present in the protein corona. A transcriptomic data set was included in the analyses in order to obtain a combined multiomics view of nanoparticle-affected cellular processes. A relationship between corona proteins and the proteomic or transcriptomic responses was revealed, showing that differentially regulated proteins or transcripts were engaged in the same cellular signaling pathways. Protein corona analyses of nanoparticles in cells might therefore help in obtaining information about the molecular consequences of nanoparticle treatment. KW - Silver nanoparticles KW - Protein KW - Small-angle X-ray scattering KW - SAXS PY - 2017 DO - https://doi.org/10.1021/acs.jproteome.7b00412 SN - 1535-3893 SN - 1535-3907 VL - 16 IS - 11 SP - 4020 EP - 4034 PB - Americal Chemical Society AN - OPUS4-42688 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Amano, K. O. A. A1 - Hahn, S.-K. A1 - Butt, N. A1 - Vorwerk, P. A1 - Gimadieva, E. A1 - Tschirschwitz, Rico A1 - Rappsilber, Tim A1 - Krause, U. T1 - Composition and Explosibility of Gas Emissions from Lithium-Ion Batteries Undergoing Thermal Runaway N2 - Lithium-based batteries have the potential to undergo thermal runaway (TR), during which mixtures of gases are released. The purpose of this study was to assess the explosibility of the gaseous emission from LIBs of an NMC-based cathode during thermal runaway. In the current project, a series of pouch lithium-based battery cells was exposed to abuse conditions (thermal) to study the total amount of gases released and the composition of the gas mixture. First, the battery cells were placed in a closed vessel, and the pressure and temperature rise inside the vessel were measured. In a second step, the composition of gases was analysed using a Fourier transform Infrared (FTIR) spectrometer. We found that the amount of released gases was up to 102 ± 4 L, with a clear dependence on the battery capacity. This study showed that the concentration of gaseous emissions such as carbon monoxide (CO), methane (CH4), ethylene (C2H4), ethane (C2H6), and hydrogen cyanide (HCN) increased with higher cell capacity. Of the five studied flammable gases, the maximum concentrations of carbon monoxide (16.85 vol%), methane (7.6 vol%), and ethylene (7.86 vol%) were identified to be within their explosible range. Applying Le Chatelier’s law, a calculated lower explosion limit (LEL) of 7% in volume fraction was obtained for the gas mixture. The upper explosion limit (UEL) of the gas mixture was also found to be 31% in volume. A filter comprising pyrobubbles was used for the removal of the studied gas components released during the thermal abuse. The investigation revealed that the pyrobubbles filter was highly effect in the removal of HCN (up to 94% removal) and CO2 (up to 100% removal). Herein, we report the dependency of the method of thermal runaway trigger on the measured maximum temperature. KW - Lithium-ion battery KW - Thermal runaway KW - Smoke gas emission KW - Gas explosion KW - Explosion limit PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-576477 DO - https://doi.org/10.3390/batteries9060300 VL - 9 IS - 6 SP - 1 EP - 19 PB - MDPI CY - Basel, Switzerland AN - OPUS4-57647 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Tschirschwitz, Rico A1 - Schröder, Volkmar A1 - Brandes, E. A1 - Krause, U. T1 - Bestimmungsverfahren sicherheitstechnischer Kenngrößen bei nichtatmosphärischen Bedingungen N2 - Es werden die Untersuchungsergebnisse für ein geeignetes Zündkriterium zur Bestimmung von Explosionsgrenzen bei nichtatmosphärischen Bedingungen vorgestellt. Dazu wurden für Anfangsdrücke bis 20 bar Zündversuche an den Explosionsgrenzen von CHL/Luft-, CaHg/Luft-, H2/Luft- und NHs/Luft-Gemischen in einem Autoklav mit Sichtscheibe durchgeführt. In der Auswertung wurden visuelle Zündkriterien und ein Druckschwellenkriterium miteinander verglichen. Weiterhin wurden Untersuchungen zum erforderlichen Mindesvolumen des Explosionsgefäßes in Abhängigkeit des Anfangsdrucks durchgeführt. Dazu wurden jeweils Zündversuche mit demselben Gemisch aus CH4 und Luft bei Anfangsdrücken bis 50 bar in Volumina zwischen 0,2 dm3 und 6,0 dm3 durchgeführt. T2 - 3. Magdeburger Brand- und Explosionsschutztag / vfdb-Workshop CY - Magdeburg, Germany DA - 21.03.2013 KW - Kenngrößen KW - Nichtatmosphärische Bedingungen KW - Zündkriterium PY - 2013 SN - 978-3-00-041601-9 SP - 1 EP - 12 AN - OPUS4-28271 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Tschirschwitz, Rico A1 - Schröder, Volkmar A1 - Brandes, E. A1 - Krause, U. T1 - Zündkriterien für die Bestimmung von Explosionsgrenzen bei erhöhten Ausgangsdrücken N2 - Sicherheitstechnischen Kenngrößen stellen die Grundlage für die Bewertung von Explosionsrisiken in der chemischen Industrie dar, sowie für die Klassifizierung von gefährlichen Stoffen und Gütern. Sicherheitstechnische Kenngrößen sind, wie Stoff konstanten (z. B. Dichte, Siedepunkt) abhängig von Druck und Temperatur. Im Gegensatz zu Stoffkonstanten sind sicherheitstechnische Kenngrößen jedoch in unterschiedlichem Maße vom Bestimmungsverfahren abhängig. Einfluss können sowohl die Prüfapparatur (z. B. Zündgefäß, Zündquelle) als auch das Bestimmungsverfahren (vor allem das Kriterium) haben. Für die Anwendung im Explosionsschutz ist es erforderlich einheitliche und zuverlässige Werte für die Kenngrößen zu erhalten. Daher sind die Bestimmungsverfahren für Explosionskenngrößen in den meisten Fällen genormt. Sie sind in der Regel dem Geltungsbereich der europäischen Richtlinien 94/9/EG und 1999/92/EG zugeordnet. Wegen des Anwendungsbereiches der Richtlinien gelten bislang die meisten dieser genormten Bestimmungsverfahren (z. B. Explosionsgrenzen (EN 1839), Zündtemperatur (EN 14522)) nur für atmosphärische Bedingungen. Jedoch werden in der chemischen Industrie viele Prozesse mit anderen Oxidationsmitteln als Luft (z. B. reiner Sauerstoff, Distickstoffmonoxid) sowie bei höheren Drücken und Temperaturen durchgeführt. T2 - 11. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit CY - Köthen, Germany DA - 07.11.2013 KW - Kenngrößen KW - Nichtatmosphärische Bedingungen KW - Zündkriterium PY - 2013 SN - 978-3-86011-058-4 SP - 1 EP - 5 AN - OPUS4-29530 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -