TY - JOUR A1 - Brzezinka, Klaus-Werner A1 - Wachsmann-Hogiu, S. A1 - Dreyer, J. A1 - Elsaesser, T. A1 - Werncke, W. A1 - Vodchits, A.I. T1 - Ultrafast intramolecular electron transfer studied by stationary vibrational and time-resolved resonance raman spectroscopy combined with ab initio calculations PY - 2000 VL - 1 PB - Transworld Research Network CY - Trivandrum AN - OPUS4-1032 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kozich, V. A1 - Werncke, W. A1 - Dreyer, J. A1 - Brzezinka, Klaus-Werner A1 - Rini, M. A1 - Elsaesser, T. T1 - Vibrational excitation and energy redistribution after ultrafest internal conversion in 4-nitroaniline N2 - Nonequilibrium vibrational excitations of para-nitroaniline (PNA, 4-nitroaniline) occurring after internal conversion from the photoexcited charge transfer state are studied by picosecond anti-Stokes Raman scattering. Vibrational excess populations with distinctly different picosecond rise and decay times are found for a number of modes with frequencies between 860 and 1510 cm–1, including the overtone of a non-Raman active mode. A nonthermal distribution of vibrational populations exists up to about 6 ps after photoexcitation. The time-resolved experiments are complemented by steady-state infrared and Raman measurements as well as calculations based on density functional theory, providing a detailed analysis of the steady-state vibrational spectra of PNA and two of its isotopomers. A weakly Raman active vibration at about 1510 cm–1 displays the fastest rise time and a pronounced excess population and—thus—represents the main accepting mode. We suggest that an out-of-plane mode giving rise to the overtone Raman band at this frequency acts both as coupling and accepting mode in the internal conversion process. PY - 2002 DO - https://doi.org/10.1063/1.1482698 SN - 0021-9606 SN - 1089-7690 VL - 117 IS - 2 SP - 719 EP - 726 PB - American Institute of Physics CY - Melville, NY AN - OPUS4-1637 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schneider, M. A1 - Bettge, Dirk A1 - Hilgenberg, Kai A1 - Binder, M. A1 - Dollmeier, K. A1 - Dreyer, M. A1 - Klöden, B. A1 - Schlingmann, T. A1 - Schmidt, J. T1 - Reproducibility and Scattering in Additive Manufacturing: Results from a Round Robin on PBF-LB/M AlSi10Mg Alloy T1 - Reproduzierbarkeit und Streuung bei der additiven Fertigung: Ergebnisse eines Ringversuchs mit einer PBF-LB/M AlSi10Mg-Legierung N2 - The round robin test investigated the reliability users can expect for AlSi10Mg additive manufactured specimens by laser powder bed fusion through examining powder quality, process parameter, microstructure defects, strength and fatigue. Besides for one outlier, expected static material properties could be found. Optical microstructure inspection was beneficial to determine true porosity and porosity types to explain the occurring scatter in properties. Fractographic analyses reveal that the fatigue crack propagation starts at the rough as-built surface for all specimens. Statistical analysis of the scatter in fatigue using statistical derived safety factors concludes that at a stress of 36.87 MPa the fatigue limit of 107 cycles could be reached for all specimen with a survival probability of 99.999 %. N2 - Im Rahmen eines Ringversuchs wurde durch die Untersuchung der Pulverqualität, der Prozessparameter, der Gefügefehler, der Festigkeit und der Ermüdung die Zuverlässigkeit bestimmt, die Nutzer von AlSi10Mg-Proben erwarten können, die mit pulverbettbasiertes Schmelzen mittels Laser (engl. Laser Powder Bed Fusion) gefertigt worden sind. Abgesehen von einem Ausreißer wurden die erwarteten statischen Materialeigenschaften erreicht. Eine optische Gefügeprüfung diente dazu, die tatsächliche Porosität und Arten von Porosität zu ermitteln, um die bei den Eigenschaften auftretende Streuung zu erklären. Fraktographische Unterschungen zeigen eine bei allen Proben von der rauen Oberfläche im As-built-Zustand ausgehende Ermüdungsrissausbreitung. Aus der statistischen Analyse der Streuung bezüglich der Ermüdung unter Anwendung von statistischen abgeleiteten Sicherheitsfaktoren geht hervor, dass alle Proben die Dauerfestigkeit von 107 Zyklen bei einer Spannung von 36,87 MPa mit einer Überlebenswahrscheinlichkeit von 99,999 % erreichten. KW - Additive manufacturing KW - Reproducibility KW - Reliability PY - 2022 DO - https://doi.org/10.1515/pm-2022-1018 SN - 2195-8599 VL - 59 IS - 10 SP - 580 EP - 614 PB - De Gruyter AN - OPUS4-55935 LA - mul AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -