TY - JOUR
A1 - Seah, M.P.
A1 - Spencer, S.J.
A1 - Bensebaa, F.
A1 - Vickridge, I.
A1 - Danzebrink, H.
A1 - Krumrey, M.
A1 - Gross, Thomas
A1 - Österle, Werner
A1 - Wendler, E.
A1 - Rheinländer, B.
A1 - Azuma, Y.
A1 - Kojima, I.
A1 - Suzuki, N.
A1 - Suzuki, M.
A1 - Tanuma, S.
A1 - Moon, D.W.
A1 - Lee, H.J.
A1 - Cho, H.M.
A1 - Chen, H.Y.
A1 - Wee, A. T. S.
A1 - Osipowicz, T.
A1 - Pan, J.S.
A1 - Jordaan, W.A.
A1 - Hauert, R.
A1 - Klotz, U.
A1 - van der Marel, C.
A1 - Verheijen, M.
A1 - Tamminga, Y.
A1 - Jeynes, C.
A1 - Bailey, P.
A1 - Biswas, S.
A1 - Falke, U.
A1 - Nguyen, N.V.
A1 - Chandler-Horowitz, D.
A1 - Ehrstein, J.R.
A1 - Muller, D.
A1 - Dura, J.A.
T1 - Critical review of the current status of thickness measurements for ultrathin SiO2 on Si - Part V: Results of a CCQM pilot study
N2 - Results are reported from a pilot study under the Consultative Committee for Amount of Substance (CCQM) to compare measurements of and resolve any relevant measurement issues in, the amount of thermal SiO2 oxide on (100) and (111) orientation Si wafer substrates in the thickness range 1.5 - 8 nm. As a result of the invitation to participate in this activity, 45 sets of measurements have been made in different laboratories using 10 analytical methods: medium-energy ion scattering spectrometry (MEIS), nuclear reaction analysis (NRA), RBS, elastic backscattering spectrometry (EBS), XPS, SIMS, ellipsometry, grazing-incidence x-ray reflectrometry (GIXRR), neutron reflectometry and transmission electron microscopy (TEM). The measurements are made on separate sets of 10 carefully prepared samples, all of which have been characterised by a combination of ellipsometry and XPS using carefully established reference conditions and reference parameters.
The results have been assessed against the National Physical Laboratory (NPL) data and all show excellent linearity. The remaining data sets correlate with the NPL data with average root-mean-square scatters of 0.15 nm, half being better than 0.1 nm and a few at or better than 0.05 nm. Each set of data allows a relative scaling constant and a zero thickness offset to be determined. Each method has an inherent zero thickness offset between 0 nm and 1 nm and it is these offsets, measured here for the first time, that have caused many problems in the past. There are three basic classes of offset: water and carbonadeous contamination equivalent to ~1 nm as seen by ellipsometry; adsorbed oxygen mainly from water at an equivalent thickness of 0.5 nm as seen by MEIS, NRA, RBS and possibly GIXRR; and no offset as seen by XPS using the Si 2p peaks. Each technique has a different uncertainty for the scaling constant and consistent results have been achieved. X-Ray photoelectron spectroscopy has large uncertainties for the scaling constant but a high precision and, critically, if used correctly, has zero offset. Thus, a combination of XPS and the other methods allows the XPS scaling constant to be determined with low uncertainty, traceable via the other methods. XPS laboratories returning results early were invited to test a new reference procedure. All showed very significant improvements. The reference attenuation lengths thus need scaling by 0.986 ± 0.009 (at an expansion factor of 2) deduced from the data for the other methods. Several other methods have small offsets and, to the extent that these can be shown to be constant or measurable, then these methods will also show low uncertainty. Recommendations are provided for parameters for XPS, MEIS, RBS and NRA to improve their accuracy.
KW - Calibration
KW - Ellipsometry
KW - GIXRR
KW - Interlaboratory study
KW - MEIS
KW - Neutron reflectometry
KW - NRA
KW - RBS
KW - Silicon dioxide
KW - SIMS
KW - XPS
PY - 2004
DO - https://doi.org/10.1002/sia.1909
SN - 0142-2421
SN - 1096-9918
VL - 36
IS - 9
SP - 1269
EP - 1303
PB - Wiley
CY - Chichester
AN - OPUS4-5549
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - RPRT
A1 - Seah, M.P.
A1 - Spencer, S.J.
A1 - Bensebaa, F.
A1 - Vickridge, I.
A1 - Danzebrink, H.
A1 - Krumrey, M.
A1 - Gross, Thomas
A1 - Österle, Werner
A1 - Wendler, E.
A1 - Rheinländer, B.
A1 - Azuma, Y.
A1 - Kojima, I.
A1 - Suzuki, N.
A1 - Suzuki, M.
A1 - Tanuma, S.
A1 - Moon, D.W.
A1 - Lee, H.J.
A1 - Cho, H.M.
A1 - Chen, H.Y.
A1 - Wee, A. T. S.
A1 - Osipowicz, T.
A1 - Pan, J.S.
A1 - Jordaan, W.A.
A1 - Hauert, R.
A1 - Klotz, U.
A1 - van der Marel, C.
A1 - Verheijen, M.
A1 - Tamminga, Y.
A1 - Jeynes, C.
A1 - Bailey, P.
A1 - Biswas, S.
A1 - Falke, U.
A1 - Nguyen, N.V.
A1 - Chandler-Horowitz, D.
A1 - Ehrstein, J.R.
A1 - Muller, D.
A1 - Dura, J.A.
T1 - Ultra-thin SiO2 on Si, Part V: Results of a CCQM Pilot Study of Thickness Measurements
KW - SiO2
KW - Thin films
KW - Thickness
KW - XPS
KW - Ellipsometry
KW - TEM
PY - 2003
SN - 1473-2734
SP - 57 pages
AN - OPUS4-4118
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Abou-Ras, D.
A1 - Caballero, R.
A1 - Fischer, C.-H.
A1 - Kaufmann, C.A.
A1 - Lauermann, I.
A1 - Mainz, R.
A1 - Mönig, H.
A1 - Schöpke, A.
A1 - Stephan, C.
A1 - Streeck, C.
A1 - Schorr, S.
A1 - Eicke, A.
A1 - Döbeli, M.
A1 - Gade, B.
A1 - Hinrichs, J.
A1 - Nunney, T.
A1 - Dijkstra, H.
A1 - Hoffmann, V.
A1 - Klemm, D.
A1 - Efimova, V.
A1 - Bergmaier, A.
A1 - Dollinger, G.
A1 - Wirth, Thomas
A1 - Unger, Wolfgang
A1 - Rockett, A.A.
A1 - Perez-Rodriguez, A.
A1 - Alvarez-Garcia, J.
A1 - Izquierdo-Roca, V.
A1 - Schmid, T.
A1 - Choi, P.-P.
A1 - Müller, M.
A1 - Bertram, F.
A1 - Christen, J.
A1 - Khatri, H.
A1 - Collins, R.W.
A1 - Marsillac, S.
A1 - Kötschau, I.
T1 - Comprehensive comparison of various techniques for the analysis of elemental distributions in thin films
N2 - The present work shows results on elemental distribution analyses in Cu(In,Ga)Se2 thin films for solar cells performed by use of wavelength-dispersive and energy-dispersive X-ray spectrometry (EDX) in a scanning electron microscope, EDX in a transmission electron microscope, X-ray photoelectron, angle-dependent soft X-ray emission, secondary ion-mass (SIMS), time-of-flight SIMS, sputtered neutral mass, glow-discharge optical emission and glow-discharge mass, Auger electron, and Rutherford backscattering spectrometry, by use of scanning Auger electron microscopy, Raman depth profiling, and Raman mapping, as well as by use of elastic recoil detection analysis, grazing-incidence X-ray and electron backscatter diffraction, and grazing-incidence X-ray fluorescence analysis. The Cu(In,Ga)Se2 thin films used for the present comparison were produced during the same identical deposition run and exhibit thicknesses of about 2 µm. The analysis techniques were compared with respect to their spatial and depth resolutions, measuring speeds, availabilities, and detection limits.
KW - Elemental distributions
KW - Comparison
KW - Depth profiling
KW - Chemical mapping
KW - Thin films
KW - Solar cells
KW - Chalcopyrite-type
KW - Cu(In,Ga)Se2
PY - 2011
DO - https://doi.org/10.1017/S1431927611000523
SN - 1431-9276
SN - 1435-8115
VL - 17
IS - 5
SP - 728
EP - 751
PB - Cambridge University Press
CY - New York, NY
AN - OPUS4-24506
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Massiot, D.
A1 - Müller, D.
A1 - Hübert, Thomas
A1 - Schneider, M.
A1 - Kentgens, A.
A1 - Coté, B.
A1 - Coutures, J.
A1 - Gessner, W.
T1 - Double rotation and magic-angle spinning nuclear magnetic resonance study of 27Al: reexamination of the aluminium borate 9Al2O3 · 2B2O3
N2 - 27Al nuclear magnetic resonance spectra of polycrystalline aluminium borate 9Al2O3 · 2B2O3 have been measured in double rotation at 11.7 and 7.0 T and high-speed magic-angle spinning at 7.0, 9.4, 11.7, 14.1 and 17.6 T. Spinning sidebands from the satellite transitions were observed at 7.0 and 14.1 T. Each of the four structural aluminium sites [Al(IV), Al(V)(1), Al(V)(2) and Al(VI)] are observed, characterised and assigned in the spectra. The obtained parameter set gives a fully consistent interpretation in agreement with the crystal structure of the compound.
KW - Aluminium
KW - Kernresonanz, magnetisch
KW - Winkel, magisch
KW - Doppelrotation
PY - 1995
DO - https://doi.org/10.1016/0926-2040(95)00021-H
SN - 0926-2040
SN - 1527-3326
VL - 5
IS - 2
SP - 175
EP - 180
PB - Academ. Press
CY - Orlando, Fla.
AN - OPUS4-639
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Müller, B.
A1 - Dahms, A.
A1 - Jakob, B.
A1 - Knudsen, H.N.
A1 - Afshari, A.
A1 - Wargocki, P.
A1 - Olesen, B.
A1 - Berglund, B.
A1 - Ramalho, O.
A1 - Häringer, D.
A1 - Jann, Oliver
A1 - Horn, Wolfgang
A1 - Nesa, D.
A1 - Loubet, F.
A1 - Ruponen, M.
T1 - Measuring perceived air quality and intensity by means of sensor systems, the European Project SysPAQ
T2 - Healthy buildings 2009 - 9th International conference & exhibition
CY - Syracuse, NY, USA
DA - 2009-09-13
KW - Sensor systems
KW - Perceived air quality
KW - Perceived intensity
PY - 2009
IS - Paper 326
SP - 1
EP - 4
CY - Syracuse, NY, USA
AN - OPUS4-20106
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Herzel, Hannes
A1 - Dombinov, V.
A1 - Vogel, Christian
A1 - Willbold, S.
A1 - Levandowski, G. V.
A1 - Meiller, M.
A1 - Müller, F.
A1 - Zang, J. W.
A1 - da Fonseca-Zang, W. A.
A1 - Jablonowski, N. D.
A1 - Schrey, S. D.
A1 - Adam, Christian
T1 - Soybean Fertilized by P-Phases from Bagasse-Based Materials: P-Extraction Procedures, Diffusive Gradients in Thin Films (DGT), and X-ray Diffraction Analysis (XRD)
N2 - The Brazilian sugarcane industry produced around 173 million tons (Mt) of bagasse in 2018. Bagasse is a by-product of juice extraction for ethanol and sugar production and is combusted in order to generate power, producing up to 10 Mt of ash per year. This ash contains various concentrations of plant nutrients, which allow the ash to be used as a crop fertilizer. However, the concentration and extractability of phosphorus (P), an essential plant nutrient, are low in bagasse ash. To increase the P content, we co-gasified and co-combusted bagasse with P-rich chicken manure. The resulting ash was thermochemically post-treated with alkali additives (Na2SO4 and K2SO4) to increase the availability of P to plants. We aimed to: (i) investigate the effect of thermochemical post-treatment of co-gasification residue and co-combustion ash on P availability to soybeans, (ii) explore the potential of chemical extraction methods (citric acid, neutral ammonium citrate, formic acid, and Mehlich-I) and diffusive gradients in thin films (DGT) to predict the availability of P to soybeans, and (iii) identify the responsible P-phases using X-ray diffraction . We evaluated P availability to soybeans growing in Brazilian Oxisol soil in two independent greenhouse pot experiments. The positive effect of thermochemical treatment on P availability from gasification residue was confirmed through the observation of increased P uptake and biomass in soybean plants. These findings were confirmed by chemical extraction methods and DGT. The gasification residue contained whitlockite as its main P-bearing phase. Thermochemical post-treatment converted whitlockite into highly soluble CaNaPO4. In contrast, co-combustion ash already contained highly soluble Ca(Na,K)PO4 as its main P-bearing phase, making thermochemical post-treatment unnecessary for increasing P availability. In conclusion, increased extractability and availability of P for soybeans were closely connected to the formation of calcium alkali phosphate. Our findings indicate that this combined methodology allows for the prediction of P-fertilization effects of ash.
KW - Sugar cane bagasse
KW - Chicken manure ash
KW - Thermochemical treatment
KW - Nutrient
KW - Plant availability
PY - 2020
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-509735
DO - https://doi.org/10.3390/agronomy10060895
VL - 10
SP - 895
EP - 6
PB - MDPI
AN - OPUS4-50973
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Dombinov, V.
A1 - Herzel, Hannes
A1 - Meiller, M.
A1 - Müller, F.
A1 - Willbold, S.
A1 - Zang, J. W.
A1 - da Fonseca-Zang, W. A.
A1 - Adam, Christian
A1 - Klose, H.
A1 - Poorter, H.
A1 - Jablonowski, N. D.
A1 - Schrey, S. D.
T1 - Sugarcane bagasse ash as fertilizer for soybeans: Effects of added residues on ash composition, mineralogy, phosphorus extractability and plant availability
N2 - Sugarcane bagasse is commonly combusted to generate energy. Unfortunately, recycling strategies rarely consider the resulting ash as a potential fertilizer. To evaluate this recycling strategy for a sustainable circular economy, we characterized bagasse ash as a fertilizer and measured the effects of co-gasification and co-combustion of bagasse with either chicken manure or sewage sludge: on the phosphorus (P) mass fraction, P-extractability, and mineral P phases. Furthermore, we investigated the ashes as fertilizer for soybeans under greenhouse conditions. All methods in combination are reliable indicators helping to assess and predict P availability from ashes to soybeans. The fertilizer efficiency of pure bagasse ash increased with the ash amount supplied to the substrate. Nevertheless, it was not as effective as fertilization with triple-superphosphate and K2SO4, which we attributed to lower P availability. Co-gasification and co-combustion increased the P mass fraction in all bagasse-based ashes, but its extractability and availability to soybeans increased only when co-processed with chicken manure, because it enabled the formation of readily available Ca-alkali phosphates. Therefore, we recommend co-combusting biomass with alkali-rich residues to increase the availability of P from the ash to plants.
KW - Combustion and gasification
KW - Phosphate extractability and availability
KW - X-ray diffraction (XRD)
PY - 2022
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-567632
DO - https://doi.org/10.3389/fpls.2022.1041924
SN - 1664-462X
VL - 13
SP - 1
EP - 13
PB - Frontiers Media
CY - Lausanne
AN - OPUS4-56763
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Müller, Bernd R.
A1 - Mack, D. E.
A1 - Laquai, René
A1 - Kupsch, Andreas
A1 - Helle, O.
A1 - Sebold, D.
A1 - Vaßen, R.
A1 - Bruno, Giovanni
T1 - Charakterisierung der Porositäts- und Rissdichteentwicklung in Wärmedämmschichten von Gasturbinenschaufeln mittels Synchrotron Refraktions Radiographie
N2 - Die Degradation von Wärmedämmschichten(thermal barrier coatings - TBCs) in Gasturbinen durch glasartige Calcium-Magnesium-Aluminiumsilikat (CMAS)Ablagerungen aus verschiedenen Quellen istseit vielen Jahren ein anhaltendes Problem. In dieser Studie wurde mit Hilfe derSynchrotron-Röntgen-Refraktions-Radiographie (SXRR), und vergleichend mit der Elektronenmikroskopie, das Eindringen von CMAS in die poröse Struktur von atmosphärisch plasmagespritzten (APS)TBCs sowie die Bildung und das Wachstum von Rissen unter thermisch zyklischer Belastung untersucht. Die Ergebnisse deuten darauf hin, dass die Infiltration sowie deren Kinetik im Brenner-Teststand wesentlich vom Benetzungsverhalten des CMAS beeinflusst werden. Trotz desoffensichtlichen Angriffs von CMAS auf die Korngrenzen hat die Wechselwirkung von Yttriumdioxid-stabilisiertem Zirkoniumdioxid (YSZ) mit intrudiertem CMAS keinen unmittelbaren Einfluss auf die Struktur und Dichte der innen Oberflächen(Risse, Poren). In einem späteren Stadium wird die Bildung von Rissen senkrecht zur äußeren Oberfläche in einer breiteren Zone der TBC-Schicht beobachtet.
T2 - DGZfP-Jahrestagung 2021
CY - Online meeting
DA - 10.05.2021
KW - CMAS - Calcium-Magnesium-Aluminiumsilikat
KW - SXRR - Synchrotron X-ray Refraction Radiography
KW - TBC - Thermal barrier coatings
PY - 2021
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-526732
UR - https://jahrestagung.dgzfp.de/Programm#P32
SP - 1
EP - 15
PB - Deutsche Gesellschaft für Zerstörungsfreie Prüfung (DGZfP)
CY - Berlin
AN - OPUS4-52673
LA - deu
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Mack, D. E.
A1 - Laquai, René
A1 - Müller, Bernd R.
A1 - Helle, O.
A1 - Sebold, D.
A1 - Vaßen, R.
A1 - Bruno, Giovanni
T1 - Evolution of porosity, crack density, and CMAS penetration in thermal barrier coatings subjected to burner rig testing
N2 - Degradation of thermal barrier coatings (TBCs) in gas‐turbine engines due to calcium–magnesium–aluminosilicate (CMAS) glassy deposits from various sources has been a persistent issue since many years. In this study, state of the art electron microscopy was correlated with X‐ray refraction techniques to elucidate the intrusion of CMAS into the porous structure of atmospheric plasma sprayed (APS) TBCs and the formation and growth of cracks under thermal cycling in a burner rig. Results indicate that the sparse nature of the infiltration as well as kinetics in the burner rig are majorly influenced by the wetting behavior of the CMAS. Despite the obvious attack of CMAS on grain boundaries, the interaction of yttria‐stabilized zirconia (YSZ) with intruded CMAS has no immediate impact on structure and density of internal surfaces. At a later stage the formation of horizontal cracks is observed in a wider zone of the TBC layer.
KW - Characterization
KW - CMAS
KW - Synchrotron X‐ray refraction radiography
KW - Thermal barrier coatings
PY - 2019
DO - https://doi.org/10.1111/jace.16465
SN - 0002-7820
SN - 1551-2916
VL - 102
IS - 10
SP - 6163
EP - 6175
PB - Wiley
CY - Oxford
AN - OPUS4-47804
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Müller, Christina
A1 - Gaal, Mate
A1 - Scharmach, Martina
A1 - Bär, Sylke
A1 - Lewis, A.
A1 - Bloodworth, T.
A1 - Guelle, D.
A1 - Pavkovic, N.
A1 - Steker, I.
T1 - Metalldetektor-Tests in Oberjettenberg November 2003 - Bundeswehrteststelle WTD 52
N2 - Dieses Poster befasst sich mit Testfeldern und Kalibrierflächen, Training, Minensuche in den Testfeldern, Ausmessung der Minenanzeigen, Dateiangabe und Analyse und dem Ausgraben der gefundenen Minen
T2 - ITEP-Workshop 2003
CY - Berlin, Germany
DA - 16.12.2003
KW - Testfelder
KW - Kalibrierflächen
KW - Minensuche
PY - 2003
PB - Bundesanstalt für Materialforschung und -prüfung (BAM)
CY - Berlin
AN - OPUS4-35853
LA - deu
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Schmitt, M.
A1 - Casperson, Ralf
A1 - Baensch, F.
A1 - Müller, D.
T1 - Nationale, europäische und internationale Normung in der zerstörungsfreien Prüfung
N2 - Normung und Standardisierung in der zerstörungsfreien Prüfung finden auf nationaler, europäischer und internationaler Ebene statt. Die Übernahme von Leitungsfunktionen in diesen Gremien erzeugt die Möglichkeit der Steuerung von Themen und Inhalten der relevanten Normen. Das persönliche Engagement der Fachexpert*innen in den nationalen Gremien und den europäischen und internationalen Arbeitsgruppen ist ein zusätzlicher Faktor für die inhaltliche Korrektheit und die inhaltliche Ausrichtung der Norm. Denn wer nicht normt, wird genormt und muss letztlich Normen anwenden, die andere entsprechend ihrer eigenen Interessen gestaltet haben. Voraussetzung für die Teilnahme in europäischen und internationalen Normungsgremien ist die Mitwirkung in den entsprechenden DINSpiegelgremien, welche die europäischen (CEN) und internationalen (ISO) Aktivitäten spiegeln und die Fachexpert*innen für die Mitarbeit autorisieren.
Auf internationaler Ebene findet die Normungsarbeit in den technischen Komitees ISO/TC 135 “Non-destructive testing” und ISO/TC 44/SC 5 “Testing and inspection of welds” und ihren Arbeitsgruppen statt. Das europäische Pendant ist das CEN/TC 138 “Zerstörungsfreie Prüfverfahren” mit seinen Arbeitsgremien. Die DINSpiegelgremien sind für die deutsche Mitarbeit in diesen Gremien und die inhaltliche Bewertung der Norm-Entwürfe zuständig.
T2 - DGZfP Jahrestagung 2024
CY - Osnabrück, Germany
DA - 05.05.2024
KW - Normung
KW - Zerstörungsfreie Prüfung
KW - Qualifizierung
KW - Qualitätssicherung
PY - 2024
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-600726
DO - https://doi.org/10.58286/29496
IS - 5
SP - 1
EP - 6
AN - OPUS4-60072
LA - deu
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Esche, E.
A1 - Müller, D.
A1 - Maiwald, Michael
A1 - Wozny, G.
T1 - Raman-based advanced control of an absorption desorption system
N2 - For absorption processes with fluctuating feed gas compositions it is vital to continuously adjust
the operation point to achieve energy efficiency. In this contribution a Raman-based advanced
process control (APC) is introduced for the absorption of carbon dioxide (CO2) using an aqueous
solution of monoethanolamine (MEA). The APC is based on a Raman spectroscopic analysis of
the composition and CO2 load of the scrubbing liquid and a non-linear model predictive control
(NMPC) to adjust the scrubbing liquid cycle. In addition, an outer real-time optimization loop is
set in place to update the set points for the absorption process depending on the current feed gas composition minimizing the energy consumption of the process. Implementation and testing of the APC have been carried out in a mini-plant at TU Berlin. During a plant operation of more than 160 hours robustness and stability of the APC were shown.
T2 - 12th International Symposium on Process Systems Engineering and 25th European Symposium on Computer Aided Process Engineering
CY - Kopenhagen, Denmark
DA - 31.05.2015
KW - Raman spectroscopy
KW - Advanced process control
KW - CO2
KW - Carbon dioxide
KW - Absorption
KW - Process analytical technology
PY - 2015
UR - https://www.elsevier.com/books/12th-international-symposium-on-process-systems-engineering-and-25th-european-symposium-on-computer-aided-process-engineering/author/978-0-444-63429-0
SN - 9780444634290
SN - 9780444634450
VL - 37
SP - 1523
EP - 1528
PB - Elsevier
CY - Amsterdam
AN - OPUS4-37669
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Esche, E.
A1 - Kraemer, B.
A1 - Müller, D.
A1 - Meyer, Klas
A1 - Zientek, Nicolai
A1 - Maiwald, Michael
A1 - Wozny, G.
T1 - Improved desorption control via Raman spectroscopy
N2 - In this contribution a Raman spectrometer based control structure for the heating of a desorption column is proposed. For this purpose calibration experiments for the absorption of carbon dioxide using monoethanolamine solutions are carried out and calibration models are developed to measure both carbon dioxide liquid loads and monoethanolamine mass fractions. The calibration experiments are supported by online NMR spectroscopy to accurately measure the appearance of all species in the electrolyte system. Both models are tested during the plant operation of a mini-plant for the oxidative coupling of methane and the proof of concept for the control structure is given. The Raman spectroscopy implemented in the ATEX conform mini-plant shows a reliable and robust performance being even indifferent to impurities hindering the GC analysis.
T2 - 20th International Conference of Process Engineering and Chemical Plant Design
CY - Berlin, Germany
DA - 15.10.2014
KW - Absorption
KW - Carbon capture
KW - Raman spectroscopy
KW - desorption control
KW - Prozessanalytik
KW - Process analytical technology
PY - 2014
UR - https://www.verfahrenstechnik.tu-berlin.de/fileadmin/fg158/Dokumente/Manuskripte/2014/20th-ICPEPD-Proceedings.pdf
SN - 978-3-00-047364-7
SP - 223
EP - 233
PB - Technische Universität Berlin
CY - Berlin
AN - OPUS4-37399
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Müller, D.
T1 - Hydroformylation of long-chained alkenes in microemulsions: Raman-spectrometer assisted mini-plant operation
N2 - Hydroformylation in microemulsions under mild reaction conditions is investigated using a Rhodium-based catalyst yields high selectivity of 98:2 of the desired linear product. A successful mini-plant operation for over 130 hours was performed. Online concentration monitoring of the system was done using 785nm Raman spectrometer.
T2 - Conference: 9th International Symposium on Catalysis in Multiphase Reactors
CY - Lyon, France
DA - 07.12.2014
KW - Hydroformylierung
KW - Reaction monitoring
KW - Raman spectroscopy
KW - Online monitoring
KW - Prozessanalytik
PY - 2014
AN - OPUS4-37400
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Meyer, Klas
A1 - Kraemer, B.
A1 - Zientek, Nicolai
A1 - Esche, E.
A1 - Müller, D.
A1 - Wozny, G.
A1 - Maiwald, Michael
T1 - Eine robuste Prozessanalytik für die Reaktivabsorption von CO2 aus industriellen Gasströmen basierend auf Online-NMR- und -Raman-Spektroskopie
N2 - Die Abtrennung von CO2 aus industriellen Gasströmen ist eine großtechnisch wichtige Trennaufgabe. Neben der Aufarbeitung von Erdgas werden diese Verfahren zur Verminderung der CO2-Emission durch industrielle Rauchgase, insbesondere für alternativlose Prozesse wie die Stahl- und Zementproduktion diskutiert.
T2 - 10. Kolloquium Arbeitskreis Prozessanalytik
CY - Gerlingen, Germany
DA - 25.11.2014
KW - Prozessanalytik
KW - Quantitative NMR-Spektroskopie
KW - Raman spectroscopy
KW - CO2-Absorption
KW - CCS
PY - 2014
UR - http://arbeitskreis-prozessanalytik.de/images/stories/Veranstaltungen/Kolloquien/10_kolloquium_2014/tagungsband_10_kolloquium_ak_prozessanalytik_2014_hq-druck_f.pdf
SP - P03, 23
EP - 23
PB - Bundesanstalt für Materialforschung und -prüfung (BAM)
CY - Berlin
AN - OPUS4-38359
LA - deu
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Paul, Andrea
A1 - Müller, D.
A1 - Esche, E.
A1 - Wozny, G.
A1 - Maiwald, Michael
T1 - Chemometric modeling of on-line Raman spectra from miniplant operation
N2 - The project InPROMPT aims to establish a robust hydroformylation reaction process of the alkene n-dodecene to the aldehyde n-tridecanal using a rhodium complex as catalyst in the presence of syngas. This industrial relevant production process demands further research for optimization and expansion. For that purpose, the fiber optic coupled probe of a process Raman spectrometer is directly introduced in the product stream, which enables the recording of spectra within short control intervals.
T2 - 10. Kolloquium Arbeitskreis Prozessanalytik
CY - Gerlingen, Germany
DA - 25.11.2014
KW - Reaction monitoring
KW - Chemometrics
KW - Raman spectroscopy
KW - Hydroformylation
PY - 2014
UR - http://arbeitskreis-prozessanalytik.de/images/stories/Veranstaltungen/Kolloquien/10_kolloquium_2014/tagungsband_10_kolloquium_ak_prozessanalytik_2014_hq-druck_f.pdf
SP - P12, 34
EP - 34
PB - BAM Bundesanstalt für Materialforschung und -prüfung
CY - Berlin
AN - OPUS4-38361
LA - deu
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Strangfeld, Christoph
A1 - Müller-Vahl, H. F.
A1 - Nayeri, C. N.
A1 - Paschereit, C. O.
A1 - Greenblatt, D.
T1 - Airfoil synchronous surging and pitching
N2 - Combined surging and pitching of an airfoil at the identical frequency (i.e. synchronously), at four different phase differences, was investigated theoretically and experimentally. The most general unsteady theoretical formulation was adopted to calculate the lift coefficient, and then extended to explicitly compute the unsteady bound vortex sheet. This was used for comparison with experiments and facilitated the computation of both Joukowsky and impulsive-pressure lift contributions. Experiments were performed using a symmetric 18 % thick airfoil in an unsteady wind tunnel at an average Reynolds number of 3.0*10^5 , with a free-stream oscillation amplitude of 51 %, an angle-of-attack range of 2° +- 2° and a reduced frequency of 0.097. In general, excellent correspondence was observed between theory and experiment, representing the first direct experimental validation of the general theory. It was shown, both theoretically and experimentally, that the lift coefficient was not accurately represented by independent superposition of surging and pitching effects, due to variations in the instantaneous effective reduced frequency not accounted for during pure pitching. Deviations from theory, observed at angle-of-attack phase leads of 90° and 180°, were attributed to bursting of separation bubbles during the early stages of the acceleration phase. The largest deviations occurred when the impulsive-pressure lift contribution was small relative to the Joukowsky contribution, because the latter was most affected by bubble bursting. Bubble bursting resulted in large form-drag oscillations that occurred at identical phase angles within the oscillation cycle, irrespective of the phase difference between surging and pitching, as well as in the absence of pitching.
KW - Unsteady aerodynamics
KW - Dynamic stall
KW - Separation bubble
KW - Bubble bursting
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-630068
DO - https://doi.org/10.1017/jfm.2025.220
SN - 1469-7645
VL - 1009
SP - 1
EP - 33
PB - Cambridge University Press (CUP)
AN - OPUS4-63006
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Sittner, Jonathan
A1 - Götze, Jens
A1 - Müller, Axel
A1 - Renno, Axel D.
A1 - Ziegenrücker, René
A1 - Pan, Yuanming
T1 - Trace element analysis and luminescence behavior of quartz in pegmatites of the Tørdal Region, Norway
N2 - This publication presents a study on the mineral chemistry and luminescence properties of quartz samples from pegmatites of the Tørdal region in Norway. A total of 12 samples were analyzed using Secondary Ion Mass Spectrometry (SIMS), Electron Paramagnetic Resonance Spectroscopy (EPR), and Cathodoluminescence (CL) to gain insights into their trace element concentration and distribution as well as their luminescence behavior. The samples are characterized by different Cl emissions at 450 nm, 500 nm 650 nm and an additional shoulder at 390 nm, which is only partially visible due to the absorption of the glass optics. Of these luminescence bands, the 500 nm band is the most dominant in most samples and it is characterized by an initial blue-green luminescence, which is not stable under electron irradiation. Moreover, it is characterized by a heterogeneous distribution within the samples. This luminescence can be mostly assigned to [AlO4/M+]0 defects, with charge compensation mostly achieved by Li+. Analyses by EPR spectroscopy prove the dominance of structurally bound Al, Li, and Ti ions in the investigated samples. Further analyses using SIMS mapping demonstrate that Na and K are mainly bound to micro fractures or inclusions, suggesting a limited role in the compensation of the luminescence centers. Additionally, the SIMS mappings show that some samples contain Al-rich clusters of 10 to 20 µm in diameter, whereas other trace elements are characterized by a homogeneous distribution. These clusters correspond to bright luminescence areas in size and shape and could potentially indicate H+ compensated [AlO4/M+]0 defects.
KW - Quartz
KW - Trace elements
KW - SIMS
KW - Cathodoluminescence
KW - EPR
KW - Tørdal
KW - Pegmatite
PY - 2024
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-612529
DO - https://doi.org/10.1016/j.chemgeo.2024.122427
VL - 670
SP - 1
EP - 15
PB - Elsevier BV
AN - OPUS4-61252
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Medina, A.
A1 - Ol, M. V.
A1 - Greenblatt, D.
A1 - Müller-Vahl, H.
A1 - Strangfeld, Christoph
T1 - High-Amplitude Surge of a Pitching Airfoil: Complementary Wind- and Water-Tunnel Measurements
N2 - RECENT interest in gust response, rotorcraft forward flight and wind energy, among other applications, has focused on streamwise oscillations of nominally two-dimensional airfoils in attached and separated flows. The airfoil may be simultaneously held at constant incidence or execute some maneuver, such as pitch.
The relative freestream is spatially uniform but temporally unsteady, and this can be accomplished in a ground-test facility in two ways. The first method is to vary the output of the prime mover, such as the rotational speed of the impeller or the blower driving a wind tunnel, or (alternatively) to vary the pressure drop in the tunnel, thereby varying the flow speed in the test section, despite nominally constant primemover revolutions per minute. The second method is used to keep the tunnel’s operating speed constant, as well as to move the test article in the streamwise direction, fore and aft (for example, via an electric linear motor), such that the relative freestream speed felt by the test article varies according to some waveform. Typically, the latter approach is chosen in water tunnels, where there is too much tunnel-circuit inertia to vary the flow speed directly but where the usually low tunnel test section flow speeds enable large excursions in the relative freestream by oscillation of the test article. In fact, outright reverse flow is possible by moving the test article in the laboratory frame at a higher speed than the water-tunnel flow speed. In either case, a sinusoidal relative-speed waveform is the most intuitively realizable, and this can be combined with similar oscillations in the airfoil incidence angle or other kinematics. Although the two methods of realizing streamwise oscillations are mechanically distinct, experimental comparisons between an oscillating test article in a water tunnel and a stationary test article in a wind tunnel with a louvermechanismhave demonstrated agreement in themeasured lift and drag histories. Such experimentswere performed by Granlund et al. for a 10% freestream amplitude oscillation and fixed airfoil incidence, comparing a free-surface water tunnel and a closed-circuit wind tunnel. After buoyancy was subtracted from the wind-tunnel data (resulting from the louver pressure drop) and the model inertia subtracted from the water-tunnel data (resulting from acceleration of the test article), the remaining lift and drag histories matched well at the low freestream oscillation amplitude regime. The work of Granlund et al. was later extended to high-advance-ratio streamwise oscillations of 50% amplitude by Greenblatt et al., where the aerodynamic histories of the water-tunnel and wind-tunnel facilities were compared in combined pitch and freestreamoscillations (governed by relative pitch phase), pure pitch oscillations, and purely freestream oscillations. Agreement between the two facilities’ data for fixed-incidence streamwise oscillations was reasonably good, and in fact, better than agreement in just the static lift and drag, evidently owing to differences in blockage and model-support systems. Additionally, Greenblatt et al. determined there was no strong coupling between simultaneous freestream oscillations and pitch oscillations on resultant lift and moment coefficients.
KW - Wind energy
KW - Dynamic stall
KW - Deep stall
KW - Airfoil surging
KW - Airfoil pitching
PY - 2018
DO - https://doi.org/10.2514/1.J056408
SN - 0001-1452
SN - 1533-385X
VL - 56
IS - 4
SP - 1703
EP - 1709
PB - American Institute of Aeronautics and Astronautics
AN - OPUS4-43994
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Greenblatt, D.
A1 - Müller-Vahl, H.
A1 - Strangfeld, Christoph
T1 - Laminar separation bubble bursting in a surging stream
N2 - The effect of high-amplitude harmonic surging on airfoil laminar separation bubbles, at small angles of attack, was investigated experimentally in a dedicated surging-flow wind tunnel. A generalized pressure coefficient was developed that accounts for local static pressure variations due to surging. This critical generalization facilitated direct comparisons between surging and quasisteady pressure coefficients, and thus unsteady effects could be distinguished from Reynolds number effects. A momentum-integral boundary layer analysis was implemented to determine movement of the bubble separation point, and movement of the transition point was extracted from experimental surface pressure coefficients. The most significant finding was that bubble bursting occurs, counterintuitively, during early imposition of the favorable temporal pressure gradient, because the favorable pressure gradient rapidly drives the bubble aft, rendering it unable to reattach. This surge-induced dynamic stall mechanism resulted in large lift and form-drag coefficient oscillations.
Furthermore, failure to implement the generalized pressure coefficient definition resulted in temporal form-drag coefficient errors of up to 400 counts.
KW - Aerodynamics
KW - Boundary layer receptivity, stability & separation
KW - Boundary layers
PY - 2023
DO - https://doi.org/10.1103/PhysRevFluids.8.L012102
SN - 2469-990X
VL - 8
IS - 1
SP - 1
EP - 11
PB - American Physical Society
AN - OPUS4-56860
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Bertovic, Marija
A1 - Calmon, P.
A1 - Carter, L.
A1 - Fischer, J.
A1 - Forsyth, D.
A1 - Holstein, R.
A1 - McGrath, B.
A1 - Müller, Christina
A1 - Pavlovic, Mato
A1 - Ronneteg, U.
A1 - Rummel, W.
A1 - Schubert, F.
A1 - Selby, G.
T1 - Summary of the "open space technology discussions" on reliability of NDE
N2 - Since the beginnings of the European American Workshops (EAW) in 1997, the aim was to gather the experts in NDE reliability and discuss burning topics with the aim of identifying crucial problems and suggesting ways to move forward. This was usually achieved during the so-called break-out sessions, in which predetermined topics were discussed. During the 5th EAW, held in Berlin in 2013, this approach was replaced by an Open Space Technology (OST) approach. The benefit of this approach is seen in the freedom of topic choices, i. e., the topics are not predetermined but rather arise at that moment in that space and by the participants choice. The following topics arose: new reliability methods (Bayesian, MAPOD,
), structural health monitoring, definition of requirements of NDE by customer versus provider, what value of POD is good enough?, human factors, manual versus automated inspection, and basic concepts of reliability of NDE. The participants were encouraged to walk from one session to another and openly express their opinions. These were in the end summarized by a chosen group of moderators and presented in this paper.
N2 - Seit den Anfängen der europäischen amerikanischen Workshops (EAW) im Jahr 1997 war es das Ziel, Experten auf dem Gebiet der ZfP-Zuverlässigkeit zusammenzuführen und aktuelle Themen zu diskutieren, um wichtige Probleme zu identifizieren und Wege für deren Lösung vorzuschlagen. Dies wurde in der Regel während der sogenannten Break-out Sessions erreicht, in denen vorgegebene Themen diskutiert wurden. Während des 5. EAW, der in Berlin im Jahr 2013 stattfand, wurde dieser Ansatz durch einen Open Space Technology (OST) Ansatz ersetzt. Open Space ist eine Methode der Gruppenmoderation, die sehr gut geeignet ist, um neue Ideen zu entwickeln und selbstständiges Arbeiten zu fördern, d. h. die Themen werden nicht vorgegeben, sondern ergeben sich in diesem Moment in diesem Raum und durch die Wahl der Teilnehmer. Die folgenden Themen wurden herausgearbeitet: neue Zuverlässigkeitsmethoden (Bayes, MAPOD, ...
), Structural Health Monitoring, Definition von Anforderungen der Kunden gegenüber den ZfP-Anbietern, Welcher Wert der POD ist gut genug?, der Einfluss menschlicher Faktoren, manuelle gegenüber automatisierte Prüfung, sowie Grundkonzepte der ZfP-Zuverlässigkeit. Die Teilnehmer wurden aufgefordert, von einer Sitzung zur anderen zu wechseln und offen ihre Meinung zu äußern. Diese Meinungen wurden am Ende von einer ausgewählten Gruppe von Moderatoren zusammengefasst und werden in diesem Beitrag vorgestellt.
KW - NDE reliability
KW - POD
KW - Bayesian approach
KW - Structural health monitoring
KW - Human factors
KW - Open space technology
PY - 2014
UR - http://www.hanser-elibrary.com/doi/pdf/10.3139/120.110604
DO - https://doi.org/10.3139/120.110604
SN - 0025-5300
VL - 56
IS - 7-8
SP - 602
EP - 606
PB - Hanser
CY - München
AN - OPUS4-31269
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Bertovic, Marija
A1 - Calmon, P.
A1 - Carter, L.
A1 - Fisher, J.
A1 - Forsyth, D.
A1 - Holstein, R.
A1 - McGrath, B.
A1 - Müller, Christina
A1 - Pavlovic, Mato
A1 - Ronneteg, U.
A1 - Rummel, W.
A1 - Schubert, F.
A1 - Selby, G.
T1 - Summary of the open space technology discussions
N2 - The highlight of 5th European American Workshop on Reliability of NDE (5th EAW) was the “Open Space Technology“(OST) discussion. The aim of the 5thEAW and, in particular, of the OST discussion - was to shed light on the reasons, which create a “deltcT between all the qualifications and reliability models and the real reliability in the field.
In the previous 4 Workshops, the different topics of interest were discussed in the so-called break-out sessions, in which a specific goal for each working group was defined beforehand. In order not to move on “the old rails” in search for an answer, the break-out sessions were this year replaced by an open space approach. The reason for this was not to restrict the participants to a certain number of topics, but rather to allow the topics to arisefrom the interests of the participants and the needs of both the researchers and the NDT practitioners. This was achieved through setting up a wall of ideas. Each of the participantswas asked to write down as many questions or topics as they wanted, and pin them up on the wall throughout the duration of the entire Workshop. Finally, when the participants gathered for the discussion, those ideas were organized into 6 main topics:
A. New reliability methods: Multiparameter POD, MAPOD, Bayesian
B. Structural health monitoring
C. Applications in industry
D. Human factors
E. Integrated Solutions and “delta"
F. Basic concepts of reliability of NDE
As in the spirit of the OST, in which the participants themselves determine the
topics and decide how the discussion will flow, the participants from the topics C, D and E
joined their forces and disused together.
The groups separated and, under the moderation of several experts in different NDT reliability fields, the different issues have been discussed. At the end of the day the Groups were asked to present the content and the results of their work. Every group wrote a summary of the discussion.
The purpose of this paper is to present the summaries of the held discussions and, therewith, share with the NDT community the main conclusions.
T2 - 5th European-American workshop on reliability of NDE
CY - Berlin, Germany
DA - 07.10.2013
PY - 2013
SN - 978-3-940283-53-5
IS - DGZfP-BB 144
SP - 1
EP - 7
CY - Berlin
AN - OPUS4-31271
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -