TY - CONF A1 - Cuéllar, Pablo T1 - Stoffmodell für Sande im Rahmen der "Generalized Plasticity" Theorie. Anwendungen und Implementierung für die Simulation von Offshore-Pfahlgründungen. T2 - Workshop des BMU-Forschungsverbundvorhabens "Pfahlgründungen von Offshore-Windkraftanlagen" im Rahmen der RAVE-Forschungsinitiative, BAM CY - Berlin, Germany DA - 2008-10-23 PY - 2008 AN - OPUS4-18638 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Cuéllar, Pablo T1 - CPT-based design for driven piles. Insight into the ICP method and general differences with UWA, NGI and FUGRO approaches T2 - Workshop des BMU-Forschungsvorhabens "Pfahlgründungen von Offshore-Windkraftanlagen" im Rahmen der RAVE-Forschungsinitiative, BAM CY - Berlin, Germany DA - 2008-10-23 PY - 2008 AN - OPUS4-18637 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Cuéllar, Pablo T1 - Numerical Investigations of an Offshore Pile Foundation - Preliminary results with GeHoMadrid FE Code T2 - 2. Workshop "Pfahlgründungen von Offshore-Windkraftanlagen", TU Berlin CY - Berlin, Germany DA - 2009-04-29 PY - 2009 AN - OPUS4-19490 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Cuéllar, Pablo T1 - Pile Foundations for Offshore Wind Turbines. Numerical and Experimental Investigations. T2 - 1st workshop "Research Cooperation CEDEX-BAM" CY - Madrid, Spain DA - 2009-07-07 PY - 2009 AN - OPUS4-19772 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Cuéllar, Pablo T1 - Numerical and Experimental Investigations for an Offshore Pile Foundation. T2 - 1st ALERT Olek Zienkiewicz Course on "Numerical Methods in Geomechanics" CY - Madrid, Spain DA - 2009-06-26 PY - 2009 AN - OPUS4-19771 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Cuéllar, Pablo A1 - Baeßler, Matthias A1 - Rücker, Werner T1 - Ratcheting convective cells of sand grains around offshore piles under cyclic lateral loads N2 - Sand densification around the pile has traditionally been regarded as an explanation for the grain migration and soil subsidence that often occur around cyclic laterally loaded piles embedded in sand. Supported by new empirical evidence, this paper proposes that, additionally to some soil densification around the pile, the main cause for the continuous "steady-state" grain migration is a convective cell flow of sand grains in the vicinities of the pile head. Such convective flow would be caused by a ratcheting mechanism triggered by the cyclic low-frequency lateral displacements of the pile. Furthermore, the experimental results suggest that the limit between the convective cell and the static soil is marked by a distinct direct shear surface. This might shed some light into the complex phenomena related to the pile-soil interaction in the upper layers of the bedding, which are normally the main contributor for the lateral load-bearing capacity of piles. KW - Grain migration KW - Pile foundation KW - Cyclic lateral load KW - Ratcheting KW - Convection KW - Densification PY - 2009 DO - https://doi.org/10.1007/s10035-009-0153-3 SN - 1434-5021 SN - 1434-7636 SP - 1 EP - 12(?) PB - Springer CY - Berlin ; Heidelberg AN - OPUS4-20104 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Cuéllar, Pablo T1 - Investigaciones Numéricas y Experimentales para la Cimentación Offshore de Generadores Eólicos en el Mar del Norte T2 - Workshop "Quincena de la Ingenieria en la E.S.I., Escuela Superior de Ingenieria (ESI), Universidad de Cádiz" CY - Cadiz, Spain DA - 2010-03-11 PY - 2010 AN - OPUS4-21252 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Cuéllar, Pablo T1 - Pore-pressure-induced Softening and Long-Term Behaviour of Offshore Pile Foundations T2 - Workshop "Gründungen von Offshore-Windenergieanlagen", TU Berlin CY - Berlin, Germany DA - 2011-03-22 PY - 2011 AN - OPUS4-23561 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bronsert, Jeffrey A1 - Baeßler, Matthias A1 - Cuéllar, Pablo A1 - Rücker, Werner T1 - Bewertung und Optimierung von Brückenübergangsbereichen auf der Basis eines numerischen Modells für die Fahrzeug-Fahrweg-Brücken-Wechselwirkung N2 - In diesem Artikel wird ein 3D FE-Modell für den Brückenübergangsbereich vorgestellt, das eine Bewertung hinsichtlich des Langzeitverhaltens ermöglicht und an dem Optimierungsmaßnahmen diskutiert werden können. Bestandteile des numerischen Modells sind das Fahrzeug-Fahrwegmodell mit Brückenstruktur und eine Randformulierung mit der SBFEM. Die hier diskutierten Optimierungsmaßnahmen fokussieren sich auf eine reine Anpassung der Fahrwegsteifigkeit durch elastische Elemente auf der Brückenstruktur. T2 - 5. VDI-Fachtagung - Baudynamik 2015 CY - Kassel, Germany DA - 22.04.2015 PY - 2015 SN - 978-3-18-092244-7 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 2244 SP - 247 EP - 258 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-35259 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Taylor, G.R. A1 - Tan, R. A1 - O´Brien, A.S. A1 - Baeßler, Matthias A1 - Cuéllar, Pablo A1 - Lane, J.S. A1 - Evans, E. T1 - The use of physical model testing in the development of models for potential impact assessment on the UK rail network N2 - Most railway embankments in the UK were built in the Victorian era and are of end-tipped construction using materials (usually cohesive) excavated from adjacent cuttings, resulting in a clod-and-matrix structure. Historically, there has been a lack in understanding of the mechanical behaviour of such railway embankments. In the next decade railway traffic in the UK, particularly freight, is forecast to grow considerably. Consequently, there is a need to improve the understanding of how increases in rail traffic loading may influence the mechanical behaviour of railway embankments and thus track performance. The Rail Safety and Standards Board in conjunction with Network Rail is currently undertaking a programme of applied research into this topic. As part of these studies a programme of physical model tests has been carried out. Physical model tests can provide high quality data on system performance under a large range of loading conditions and geometrical configurations. The data can be generated rapidly, with test periods of weeks or months rather than years or decades. Additionally, boundary conditions are well-defined and controlled, compared with the complex situations encountered in full scale embankments in the field. This paper summarises the physical model test programme, the development of the test set-up, the tests themselves and the conclusions drawn. T2 - European Conference on Soil Mechanics and Geotechnical Engineering CY - Edinburgh, Scotland, UK DA - 13.09.2015 KW - Railway embankment KW - Clay fill KW - Physical model testing PY - 2015 SN - 978-0-7277-6067-8 DO - https://doi.org/10.1680/ecsmge.60678 SP - 361 EP - 366 AN - OPUS4-39374 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Baeßler, Matthias A1 - Cuéllar, Pablo A1 - Georgi, Steven A1 - Karabeliov, Krassimire A1 - Rücker, Werner A1 - Johnsen, Björn ED - Durstewitz, M. ED - Lange, B. T1 - „Neuland“ auf dem Meeresboden - Überwachungsverfahren und Bewertungsmodell für die Gründung von Offshore-Windenergieanlagen N2 - Offshore-Windenergie betritt Neuland, gerade bei der Gründung. Denn Windenergie auf See kann die Erfahrungen der gängigen Offshore-Konstruktionen der Öl- und Gasindustrie nur bedingt nutzen. Mehr als dort, versucht man bei der Offshore-Windenergie, die Gründungsabmessungen – insbesondere die Pfahllängen – soweit wie möglich zu reduzieren. Denn dies kann bei der hohen Anzahl der Windenergieanlagen erhebliche wirtschaftliche Vorteile bringen. Andererseits wird die Standsicherheit der Gründungen durch den viel höheren Anteil an zyklischen Lasten gegenüber den gängigen Offshore- Strukturen in schwer einschätzbarer Weise zusätzlich gefährdet. Da Offshore-Windenergieanlagen in Serienfertigung produziert werden, wirkt sich hier jeder systematische Fehler bei der Gründung dann gleich als Serienfehler auf eine Vielzahl von Anlagen aus. Überwachung ist also angesagt – und das richtige Maß bei der Pfahlgründung, der am meisten verwendete Fundamenttyp bei Windenergieanlagen. KW - Offshore Windkraftanlagen KW - Pfahlgründungen KW - Überwachungsverfahren PY - 2016 SN - 978-3-658-09782-0 SN - 978-3-658-09783-7 DO - https://doi.org/10.1007/978-3-658-09783-7 SP - 61 EP - 68 PB - Springer AN - OPUS4-39348 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Baeßler, Matthias A1 - Cuéllar, Pablo A1 - Georgi, Steven A1 - Karabeliov, Krassimire A1 - Rücker, Werner A1 - Johnsen, Björn ED - Durstewitz, M. ED - Lange, B. T1 - Uncharted Territory on the Seabed - Monitoring Procedures and Assessment Model for the Foundations of Offshore Wind Turbines N2 - Offshore wind turbines enter unknown territory, especially where the foundations are concerned. This is because offshore wind power can only make use of the experience from the common offshore constructions used by the oil and gas industry to a limited extent. The offshore wind industry has tried to reduce foundation dimensions, especially the pile lengths, as much as possible compared with those of the oil and gas industry. This is because with the large number of wind turbines involved it can provide considerable economic advantages. On the other hand, the stability of the foundations is additionally at risk because due to the much larger number of cyclic loads they are subjected to it is very difficult to predict how they will behave. Since offshore wind farms are manufactured in series, every systematic fault in the foundation acts as a series fault for a large number of turbines. This calls for monitoring – and the right dimensions of pile foundation, the most common type of foundations used for wind turbines KW - Offshore wind turbines KW - Field tests KW - Axial pile capacity PY - 2017 SN - 978-3-662-53178-5 DO - https://doi.org/10.1007/978-3-662-53179-2 SP - 61 EP - 67 PB - Springer AN - OPUS4-39341 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -