TY - CONF A1 - Recknagel, Christoph T1 - Neue europäisch harmonisierte technische Regelungen über die Verwendbarkeit von Fahrbahnübergangskonstruktionen für Brückenbauwerke T2 - Sitzung Bund-Land-Arbeitsausschuss AA 7.10 zur Information und Spiegelung des europäischen Regelungsstandes CY - Bergisch Gladbach, Germany DA - 2005-09-13 PY - 2005 AN - OPUS4-11296 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Recknagel, Christoph T1 - Bildgebende Analyse von OPA mittels X-Ray Computertomographie T2 - Kick-off-Meeting BMBF-Verbundvorhaben "LEISTRA 2" mit Vorstellung der Teilprojekte in der BASt CY - Berlin, Germany DA - 2005-11-08 PY - 2005 AN - OPUS4-11297 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Recknagel, Christoph T1 - Qualitätssicherung der Fugenfüllung - gegenwärtiger Stand der Regelungen, zukünftige Entwicklungen, Forschungsaktivitäten T2 - VSVI-Seminar "Betondeckenbau" CY - Hannover, Deutschland DA - 2005-03-01 PY - 2005 SP - 20 Seiten PB - VSVI-Niedersachsen CY - Hannover AN - OPUS4-11285 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Recknagel, Christoph T1 - Fahrbahnübergänge aus Asphalt - Stand der Prüftechnik; Bewährung und Erfahrungen in Deutschland T2 - ASTRA-EMPA-VERAS-Fachtagung 2005 CY - Dübendorf, Schweiz DA - 2005-04-05 PY - 2005 SN - 3-905594-44-7 SP - 43 EP - 52 PB - EMPA CY - Dübendorf AN - OPUS4-11266 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Alte-Teigeler, R. A1 - Recknagel, Christoph A1 - Sondermann, E. T1 - Kommentare zu den Regelungen für Fugen in Verkehrsflächen - Teil 3 PY - 2005 SN - 0039-2162 VL - 56 IS - 11 SP - 646 EP - 657 PB - Kirschbaum-Verl. CY - Bonn-Bad Godesberg AN - OPUS4-11264 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Recknagel, Christoph A1 - Goebbels, Jürgen A1 - Meinel, Dietmar T1 - Bildgebende Analyse von OPA mittels X-Ray-CT T2 - Vortrag zur Vorstellung der wissenschaftlichen Konzeption und fachlichen Kompetenz der BAM im Rahmen des Verbundvorhabens "Leiser Straßenverkehr 2" CY - Bergisch Gladbach, Germany DA - 2005-11-08 PY - 2005 AN - OPUS4-11596 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Vater, Ernst-Joachim A1 - Recknagel, Christoph ED - Petit, C. T1 - Bond strength and crack bridging behaviour of bridge deck surfacings for concrete bridges N2 - The operational principle for today's bridge deck surfacings is a strong and durable bond between all layers of the pavement and the concrete structure under all loads. A strong bond helps to ensure the desired safety level against water penetration. But in use there is a strong loading of the bond by crack development in the structure or pavement and its dynamical movement. To ensure the sealing function of the bridge deck surfacing over the time its waterproofing has to show a durable crack bridging ability. With it the useful life of the bridge deck surfacing is essentially determined. To characterise the influences on a durable bond strength and crack bridging ability of waterproofings special research and tests were realised in the BAM. From the test results it is possible to detect suitable waterproofing layers and differences in durability. Tensile fatigue strength and other mechanical features seems to be special suited material characteristics to describe the crack bridging behaviour of waterproofing layers. T2 - 5th International RILEM Conference on Cracking in Pavements CY - Limoges, France DA - 2004-05-05 PY - 2004 UR - http://www.rilem.net/fiche.php?cat=conference&reference=pro037-062 SN - 2-912143-47-0 IS - 37 SP - 521 EP - 528 PB - RILEM Publications CY - Bagneux AN - OPUS4-11873 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Recknagel, Christoph T1 - Alterungsverhalten von Fugenfüllsystemen in Verkehrsflächen - Versuchseinrichtung, Stoffergebnisse und weitere Vorgehensweise zur funktions- und bauartgerechten Kennzeichnung von Funktionsfähigkeit und Dauerhaftigkeit bei Fugenfüllsystemen in Verkehrsflächen T2 - Bundesanstalt für Strassenwesen (BASt), Sachstandsbericht an die Betreuungsgruppe CY - Bergisch Gladbach, Germany DA - 2004-12-08 PY - 2004 AN - OPUS4-11872 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Recknagel, Christoph T1 - Stand der EOTa Leitlinie für die Zulassung von Fahrbahnübergangskonstruktionen aus Asphalt für Brückenbauwerke T2 - 1. Sitzung des Bund-Länder Arbeitsausschusses 7.10.4 "Fahrbahnübergänge aus Asphalt auf Ingenieurbauwerken" bei der Senatsbauverwaltung CY - Berlin, Germany DA - 2005-06-15 PY - 2005 AN - OPUS4-11597 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Recknagel, Christoph A1 - Pirskawetz, Stephan ED - Wolf, A. T. T1 - Joint sealing systems for pavements - A new approach towards a performance related evaluation of capability and durability N2 - Joint sealants influence decisively the performance and service life of pavements although they account for only a small fraction of the total investment. Motivated by the damages observed and the resulting, increasing maintenance efforts, the Federal German Government recognizes the need for performance-evaluated joint sealing systems with improved capability (fitness-for-purpose) and durability. A literature study showed that an identification of the actual mechanical system behavior under realistic loads as well as a prediction regarding the durability (fatigue, climatic effects) of joint sealing systems are either completely lacking in most of the relevant evaluation methods or have only been incompletely addressed previously. Furthermore an imbalance between commonly used test methodologies and the actual development status of modern modified sealing materials exists, i.e., the current test methods are not effective in evaluating the performance of tailor-made products. In this paper, the authors suggest a methodology to overcome the present situation. In contrast to the existing, predominantly empirical evaluation and selection of joint sealing materials and systems for pavements, the new approach is defined by verified performance under relevant and superimposed loads. This new approach is expected to allow a more engineered joint design. In addition to the adaptation of performance-oriented material identification tests, a special focus was placed on the development and installation of a complex test facility for the investigation of the service capability and durability of joint sealing systems in building constructions in general. This paper presents an attempt at the realization of this approach for pavement joints with the help of our new joint sealant test equipment utilizing a specific, adapted load function, which comprises cyclic movements (slow and fast acting), as well as crucial climatic exposures. The test data and its interpretation are discussed. For example, the actual mechanical behavior of the various joint sealing systems as well as the relevant maximum loading of cohesive and adhesive bonds can be deduced and used to differentiate between systems. Furthermore, information gained allows discrimination of products within the various joint sealing systems. The test results will also enable numerical simulations, e.g., of different joint designs or materials by finite element analysis. The fatigue behavior is detected by analysis of cycle-dependent changes of the mechanical system characteristics. The evaluation methodology further allows investigation of the degradation mechanisms of specific system failures and, thus, enables service life prediction by reproducing the performance of the complete system under realistic conditions. Constructional defects and material flaws can be activated and detected by the performance-related test methodology, thus identifying possible corrections to material selection and application procedures. The potential of the proposed evaluation methodology is discussed for several thermoplastic and reactive joint sealing systems. KW - Pavement joints KW - System evaluation KW - System test method KW - Superimposed loading KW - Performance KW - Mechanical characteristics KW - Capability evaluation KW - Durability evaluation KW - Cohesive failure KW - Adhesive failure PY - 2010 SN - 978-0-8031-3426-3 N1 - Serientitel: ASTM Selected Technical Papers – Series title: ASTM Selected Technical Papers VL - 3 IS - STP 1514 SP - 15 EP - 37 CY - West Conshohocken, PA, USA AN - OPUS4-21933 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Recknagel, Christoph A1 - Alte-Teigeler, R. A1 - Bergmann, F.-J. A1 - Gebhards, G. A1 - Grabe, W. A1 - Guse, J. A1 - Hartel, S. A1 - Huth, P. A1 - Jannicke, B. A1 - Lobach, T. A1 - Schneider, T. A1 - Sondermann, E. A1 - Vengels, D. A1 - Voß, M. A1 - Willand, E. ED - Roßbach, W. T1 - Zusätzliche Technische Vertragsbedingungen und Richtlinien für Fugen in Verkehrsflächen ZTV Fug-StB 15 N2 - Unter Berücksichtigung praktischer und wissenschaftlich-technischer Erkenntnisse der letzten 15 Jahre - insbesondere auch auf der Basis verschiedener BAM-Forschungsergebnisse und Zulassungsverfahren - erfolgte eine Überarbeitung der Grundlagen, Bauprinzipien, Ausführungs- und Einbaukriterien sowie der Zulassungs- und Gütesicherungsmaßnahmen für insgesamt 4 Bauarten von Fugenfüllsystemen für hochbeanspruchte Verkehrsflächen. In diesem - für den Bundesfernstraßenbereich verbindlichen bautechnischen Regelwerk - finden insbesondere auch die Ergebnisse mehrerer wissenschaftlicher Vorhaben der BAM bezüglich labortechnischer Untersuchungen und Felduntersuchungen zum Funktionsverhalten und zur Dauerhaftigkeit erste baurechtliche Konsequenzen. Auf der Basis von Untersuchungen u.a. im Brückenbau wurden Regelungen für die Fugenausbildung in Asphalt und bei Befestigungskombinationen erarbeitet und umgesetzt. Damit konnten umfassende Regelungen für die maßgebenden Fahrbahnbeläge im Bundesfernstraßenbereich der Straßenbauverwaltung und ausführenden Industrieunternehmungen zur Verfügung gestellt werden. Die Neufassung dieser Regelungen dient darüber hinaus dem Ziel, den von der BAM vertretenen Wechsel hin zu einer performance-bezogenen Bewertungsmethodik, vorzubereiten. KW - Baustoffe KW - Fugen KW - Betonstraßen PY - 2015 SN - 978-3-86446-162-0 SP - 1 EP - 50 PB - FGSV Verlag GmbH CY - Köln AN - OPUS4-37220 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Recknagel, Christoph T1 - Was müssen flexible Fahrbahnübergänge leisten? N2 - Fahrbahnübergänge sind das bautechnisch-konstruktive Verbindungsglied von der Fahrbahn der freien Strecke auf Ingenieurbauwerke und anschließend wieder zurück auf die freie Strecke. Sowohl aus ökonomischen (Baukosten), ökologischen (Lärmschutz) als auch aus verkehrssicherheitstechnischen Gründen wurden in jüngster Zeit sogenannte flexible belagsähnliche Übergangskonstruktionen entwickelt. Der Beitrag benennt die materialtechnischen und konstruktiven Anforderungen als notwendige Grundlage für den Nachweis der Funktionsfähigkeit unter höchsten Verkehrsbeanspruchungen. Gleichzeitig werden neuartige material- und leistungsidentifizierende Kennwerte vorgestellt und deren Einfluss auf Funktionsfähigkeit und Dauerhaftigkeit diskutiert. Als versuchstechnische Grundlagen kommen durch die BAM entwickelte bzw. adaptierte Untersuchungsmethoden zur Anwendung. Die Interpretation der Untersuchungsergebnisse und deren Beitrag und Bedeutung für qualitätssichere europäische bzw. nationale Bauprodukte werden der Zielgruppe Verkehrsplanern, Straßenbaubehörden, Ausführenden und Nutzern erläutert. Schlussfolgerungen aus den veränderten baurechtlichen Rahmenbedingungen und Erfahrungen der BAM bei der europäischen Zulassung von Übergangskonstruktionen werden vorgestellt. T2 - Ingenieursymposium der Straßenbauingenieure Kanton Bern, Schweiz CY - Bern, Switzerland DA - 18.03.2016 KW - Dehnfugensysteme KW - Innovative lärmarme Übergangskonstruktionen PY - 2016 AN - OPUS4-37119 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Recknagel, Christoph A1 - Pirskawetz, Stephan A1 - Lüddecke, Falk ED - Imad L. Al-Qadi, ED - Tom Scarpas, ED - Loizos, Andreas T1 - Performance and service life prediction of crack preventative joint systems T2 - 6th RILEM International Conference on cracking in Pavements "Pavement Cracking - Mechanisms, Modeling, Detection, Testing and Case Histories" CY - Chicago, USA DA - 2008-06-16 KW - Joint sealing systems KW - Bituminous compounds KW - Climate KW - Service life KW - Concrete pavement PY - 2008 SN - 978-0-415-47575-4 SP - 779 EP - 790 PB - CRC Press AN - OPUS4-18281 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Recknagel, Christoph T1 - Modern materials and system solutions for pavements and expansion joints and its performance-related investigation T2 - 2nd European Road Transport Research Arena TRA 2008, "Greener, Safer and Smarter Road Transport for Europe" CY - Ljubljana, Slovenia DA - 2008-04-21 KW - Innovation KW - Performance-related assessment KW - New materials KW - New technology in Road Construction PY - 2008 SN - 978-961-6527-12-5 SP - 1 EP - 7 AN - OPUS4-18286 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Recknagel, Christoph A1 - Goebbels, Jürgen A1 - Meinel, Dietmar ED - Manfred N. Partl, T1 - Identification of the void structure of asphalt materials T2 - International ISAP Symposium on Asphalt Pavements and Environment CY - Zürich, Switzerland DA - 2008-08-18 KW - Inner structure KW - Structure characteristics KW - Void KW - Asphalt KW - Open-pored asphalt PY - 2008 SN - 978-3-905594-51-5 SP - 566 EP - 577 AN - OPUS4-18284 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Recknagel, Christoph T1 - Performance-related Evaluation Approach for improved Bridge Deck Pavements T2 - Transport Research Arena Conference CY - Ljubljana, Slovenia DA - 2008-04-21 PY - 2008 AN - OPUS4-18241 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Recknagel, Christoph T1 - Beiträge zur Sicherheit und Dauerhaftigkeit der Verkehrsinfrastruktur T2 - BAM-Kolloquium CY - Berlin, Germany DA - 2008-11-05 PY - 2008 AN - OPUS4-18355 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Recknagel, Christoph A1 - Pirskawetz, Stephan T1 - Joint sealing systems for pavements - A new approach towards a performance related evaluation of capability and durability N2 - Joint sealants influence decisively the performance and service life of pavements although they account for only a small fraction of the total investment. Motivated by the damages observed and the resulting, increasing maintenance efforts, the Federal German Government recognizes the need for performance-evaluated joint sealing systems with improved capability (fitness-for-purpose) and durability. A literature study showed that an identification of the actual mechanical system behavior under realistic loads as well as a prediction regarding the durability (fatigue, climatic effects) of joint sealing systems are either completely lacking in most of the relevant evaluation methods or have only been incompletely addressed previously. Furthermore an imbalance between commonly used test methodologies and the actual development status of modern modified sealing materials exists, i.e., the current test methods are not effective in evaluating the performance of tailor-made products. In this paper, the authors suggest a methodology to overcome the present situation. In contrast to the existing, predominantly empirical evaluation and selection of joint sealing materials and systems for pavements, the new approach is defined by verified performance under relevant and superimposed loads. This new approach is expected to allow a more engineered joint design. In addition to the adaptation of performance-oriented material identification tests, a special focus was placed on the development and installation of a complex test facility for the investigation of the service capability and durability of joint sealing systems in building constructions in general. This paper presents an attempt at the realization of this approach for pavement joints with the help of our new joint sealant test equipment utilizing a specific, adapted load function, which comprises cyclic movements (slow and fast acting), as well as crucial climatic exposures. The test data and its interpretation are discussed. For example, the actual mechanical behavior of the various joint sealing systems as well as the relevant maximum loading of cohesive and adhesive bonds can be deduced and used to differentiate between systems. Furthermore, information gained allows discrimination of products within the various joint sealing systems. The test results will also enable numerical simulations, e.g., of different joint designs or materials by finite element analysis. The fatigue behavior is detected by analysis of cycle-dependent changes of the mechanical system characteristics. The evaluation methodology further allows investigation of the degradation mechanisms of specific system failures and, thus, enables service life prediction by reproducing the performance of the complete system under realistic conditions. Constructional defects and material flaws can be activated and detected by the performance-related test methodology, thus identifying possible corrections to material selection and application procedures. The potential of the proposed evaluation methodology is discussed for several thermoplastic and reactive joint sealing systems. KW - Pavement joints KW - System evaluation KW - System test method KW - Superimposed loading KW - Performance KW - Mechanical characteristics KW - Capability evaluation KW - Durability evaluation KW - Cohesive failure KW - Adhesive failure PY - 2009 DO - https://doi.org/10.1520/JAI101961 SN - 1546-962X VL - 6 IS - 3 (Paper ID JAI101961) SP - 1 EP - 16 PB - American Society for Testing and Materials CY - West Conshohocken, Pa. AN - OPUS4-19356 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Recknagel, Christoph T1 - Offenporiger Asphalt - Porenstrukturanalyse - Untersuchungsergebnisse zur quantitativen Strukturaufklärung T2 - Abschlussveranstaltung zum Forschungs-Verbundprojekt "Leiser Straßenverkehr" CY - Berlin, Germany DA - 2009-09-02 PY - 2009 AN - OPUS4-19777 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Recknagel, Christoph T1 - Silent and Durable Expansion Joints T2 - Internationales Symposium - Silent and Durable Expansion Joints CY - Delft, Netherlands DA - 2009-09-25 PY - 2009 AN - OPUS4-20072 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Recknagel, Christoph T1 - Europäisch harmonisierte technische Regelungen über die Verwendbarkeit von Fahrbahnübergangskonstruktionen für Brückenbauwerke, Konsequenzen für Baubehörden, Hersteller, Prüfstellen T2 - Nationaler Regelungsausschuss mit Vertretern des BMVBS, Straßenbaubehörden, Herstellern CY - Bergisch Gladbach, Germany DA - 2009-10-06 PY - 2009 AN - OPUS4-20138 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Recknagel, Christoph A1 - Hoppe, Johannes A1 - Eilers, M. T1 - Technische Prüfvorschriften für die Dichtungsschicht aus einer Polymerbitumen-Schweißbahn zur Herstellung von Brückenbelägen auf Beton TL/TP-ING - Teil 7: Brückenbeläge, Abschnitt 1 N2 - Die "Technischen Prüfvorschriften für die Dichtungsschicht aus einer Polymerbitumen-Schweißbahn zur Herstellung von Brückenbelägen auf Beton" (TP BEL-B 1) enthalten alle notwendigen Angaben zur Durchführung der nach den "Technischen Lieferbedingungen für die Dichtungsschicht aus einer Polymerbitumen-Schweißbahn zur Herstellung von Brückenbelägen auf Beton" (TL BEL-B 1) geforderten Prüfungen. Art und Umfang der Einzelprüfungen sowie die entsprechenden Anforderungen sind den zugehörigen TL BEL-B 1 zu entnehmen. KW - Brückenbeläge KW - Asphaltbauweise KW - PmB Schweißbahn KW - Technische Anforderungen PY - 2022 SN - 978-3-86446-326-6 VL - 784/1 SP - 1 EP - 11 PB - FGSV Verlag GmbH CY - Köln AN - OPUS4-54857 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Recknagel, Christoph T1 - Versuchseinrichtung, Stoffergebnisse und weitere Vorgehensweise zur funktions- und bauartgerechten Kennzeichung von Leistungsfähigkeit und Dauerhaftigkeit von Fugenfüllsystemen in Verkehrsflächen T2 - Vortragsveranstaltung bei der Bundesanstalt für Straßenbauwesen (BASt) CY - Bergisch Gladbach, Germany DA - 2004-12-08 PY - 2004 AN - OPUS4-11890 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Recknagel, Christoph T1 - Alterungsverhalten von Fugenfüllsystemen in Verkehrsflächen - Performance-orientierte Stoffkennzeichnung - T2 - Wissenschaftsrat - Ergebnispräsentation bei Auftraggeber und Betreuungsgremium CY - Berlin, Germany DA - 2006-01-17 PY - 2006 AN - OPUS4-12025 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Recknagel, Christoph T1 - Fahrbahnbeläge auf Ingenieurbauwerken in Deutschland - Bau- und Konstruktionsgrundsätze, bewährte Bauarten, Prüfungsgrundsätze für Brückenbeläge auf Beton T2 - Sino-german conference on bridge deck sealings CY - Chongqing, China DA - 2006-04-10 PY - 2006 AN - OPUS4-12374 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -