TY - JOUR A1 - Faust, R. A1 - Nauroozi, D. A1 - Bruhn, C. A1 - Koch, B. A1 - Kuhlich, Paul A1 - Piechotta, Christian A1 - Nehls, Irene T1 - (3,5,5,6,8,8-Hexamethyl-5,6,7,8-tetrahydronaphthalen-2-yl)methanol: a possible metabolite of the synthetic musk fragrance AHTN N2 - The title compound (AHTN-OH), C17H26O, was prepared in order to provide standard materials for the qualitative and quantitative analysis of environmental pollutants. The molecule possesses a chiral C atom, although the structure determination was performed on racemic material, expressed in the structure as disordered chiral sites. The asymmetric unit consists of four AHTN-OH molecules containing an hydroxy group and forming a tetrameric cyclic motif built up by four strong hydrogen bonds between these hydroxy groups and additionally by two weak C–H···π interactions. Furthermore, these tetramers are linked via very weak C–H···π interactions, forming chains along the c axis. PY - 2011 U6 - https://doi.org/10.1107/S1600536811018009 SN - 1600-5368 VL - 67 SP - o1462-o1463, sup1-15 PB - Munksgaard CY - Copenhagen AN - OPUS4-24310 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kuhlich, Paul A1 - Emmerling, Franziska A1 - Kraus, Werner A1 - Nehls, Irene A1 - Piechotta, Christian T1 - 1-(4-bromo-3,5,5,6,8,8-hexamethyl-5,6,7,8-tetrahydronaphthalen-2-yl)ethan-1-one: a precursor for phase-I metabolite of AHTN N2 - The title compound, C18H25BrO, crystallized as a racemate with four independent molecules in the asymmetric unit. In the crystal, three of these four molecules are linked via C-Br...Br-C halogen bonds [Br...Br = 3.662 (2) and 3.652 (2) Å], forming dimers. PY - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-279935 SN - 1600-5368 VL - 69 IS - 4 SP - o545, sup-1 EP - sup-17 PB - Munksgaard CY - Copenhagen AN - OPUS4-27993 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kuhlich, Paul A1 - Göstl, Robert A1 - Metzinger, R. A1 - Piechotta, Christian A1 - Nehls, Irene T1 - 3,5,5,6,8,8-Hexamethyl-5,6,7,8-tetrahydro-2-naphthoic acid (AHTN-COOH) KW - AHTN KW - Tonalide KW - Cyclilc musk KW - AHTN-COOH KW - Disinfection by-product KW - Haloform reaction PY - 2010 U6 - https://doi.org/10.1107/S1600536810038572 SN - 1600-5368 VL - 66 IS - 10 SP - o2687, sup-1 - sup-12 PB - Munksgaard CY - Copenhagen AN - OPUS4-23006 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Goedecke, Caroline A1 - Mülow-Stollin, Ulrike A1 - Hering, S. A1 - Richter, Janine A1 - Piechotta, Christian A1 - Paul, Andrea A1 - Braun, Ulrike T1 - A first pilot study on the sorption of environmental pollutants on various microplastic materials N2 - With the drastic increase in plastic production, the input of plastic particles into the environment has become a recognised problem. Xenobiotics are able to sorb to polymer materials, and this process is further enhanced where they Encounter microplastics (plastic fragments <5 mm). In this work we studied the sorption of metformin, a type-2 diabetes drug, and difenoconazole, a fungicide, onto the virgin polymer materials polyamide (PA), polypropylene (PP), and polystyrene (PS). Additionally, PP was cryo-milled and PA was treated with acid to investigate the influence of an increase in surface area and chemical modification. The material properties were also studied by dynamic scanning calorimetry (DSC), gel permeation chromatography (GPC) and Fourier transform infrared spectroscopy (FTIR). Sorption experiments were performed on the basis of a full factorial design examining the effect of agitation, pH value, and salinity. Experimental results showed that difenoconazole sorbs readily to all microplastics, whereas the more polar analyte metformin did not show any affinity to the materials used. For difenoconazole the governing factor in all cases is agitation, while both pH and salinity exhibited only a slight influence. The modification of polymers leads to enhanced sorption, indicating that an increase in surface area (cryo-milled PP) or inner volume (acid-treated PA) strongly favours adsorption. Moreover, long-term experiments demonstrated that the time until equilibrium is reached depends strongly on the particle size. KW - Difenoconazole KW - Metformin KW - Plastic debris KW - Polymer KW - Dynamic scanning calorimetry PY - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-402393 SN - 2380-2391 VL - 4 IS - 1 SP - Article 1000191, 1 EP - 8 PB - Omics International CY - Los Angeles AN - OPUS4-40239 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Piechotta, Christian A1 - Kovačič, A. A1 - Steinhäuser, Lorin A1 - Heath, E. A1 - Lardy-Fontan, S. T1 - A method for monitoring estrogens in whole surface waters by GC-MS/MS N2 - Natural and synthetic estrogens are key endocrine-disrupting chemicals. Despite occurring at ultra-trace levels (below ng L-1), it is believed that they are contributing to an increase in feminized fish and other endocrine disruptive effects, and hence, their inclusion in the Watch list was not unexpected. One of the main sources ofestrogens to surface waters is wastewater effluent. Once in surface waters, they can partition into different compartments, i.e., water and suspended particulate matter. For this reason, there is an urgent need for a methodology to monitor estrogen levels below the environmental quality standards (EQS) set by the Water Framework Directive requirements. In this study, a precise and accurate gas chromatography-mass spectrometry method (GC-MS/MS) for the analysis of estrone (E1), 17β-estradiol (17β-E2), 17α-estradiol (17α- E2), 17-alpha-ethinylestradiol (EE2), and estriol (E3) in whole water samples with ng L-1 limit of quantification (LOQ) was developed and validated in accordance with CEN/TS 16800:2020 guidelines. T2 - IMSC 2022 CY - Maastricht, Netherlands DA - 27.08.2022 KW - EDC KW - WFD KW - GC-MS PY - 2022 AN - OPUS4-57097 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Piechotta, Christian A1 - Schmidt, Sebastian A1 - Nehls, Irene T1 - A New Approach for the Characterization of Commercial Linear Alkylbenzene Sulfonate (LAS) T2 - 5. Conference über Ionenanalyse (CIA) CY - Berlin, Germany DA - 2011-09-26 PY - 2011 AN - OPUS4-24371 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Goedecke, Caroline A1 - Fettig, I. A1 - Piechotta, Christian A1 - Philipp, Rosemarie A1 - Geißen, S. U. T1 - A novel GC-MS method for the determination and quantification of metformin in surface water N2 - Drug therapy for diabetes mellitus has increased significantly in recent years. 1,1-Dimethylbiguanide hydrochloride (metformin) is the most common drug used for the treatment of diabetes. Metformin is not metabolized in the human body and enters thewater cycle via sewage. A new gas chromatography-mass spectrometry (GC-MS) method has been developed which enables the quantification of metformin in surface water samples even at low concentrations in the ng L-1 range. A solid phase extraction (SPE) method for the preconcentration of metformin and the internal standard 1-butylbiguanide (buformin) was established, and the method parameters such as the composition and volume of the eluent were optimized. Derivatization of metformin and buformin was obtained by using n-methyl-bis (trifluoroacetamide)(MBTFA). The reaction conditions of the derivatization, such as the reaction temperature and volume of the derivatization agent, were evaluated. The limit of detection (LOD) and limit of quantification (LOQ) were determined to be 3.9 ng L-1 and 12 ng L-1 in surface water samples. Linearity was shown over a concentration range of 10–50 ng L-1. The good performance of the method was demonstrated by comparison with a liquid chromatography tandemmass spectrometry (LC-MS/MS) method. The results indicate that the GC-MS method is a reliable and sensitive alternative for the quantification of metformin in surface water. 1. KW - Metformin KW - GC-MS KW - Surface water PY - 2017 U6 - https://doi.org/10.1039/c6ay02606k SN - 1759-9679 SN - 1759-9660 VL - 9 IS - 10 SP - 1580 EP - 1584 PB - Royal Society of Chemistry AN - OPUS4-40243 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Steinhäuser, Lorin A1 - Piechotta, Christian A1 - Lardy-Fontan, S. A1 - Heath, E. A1 - von Törne, Wipert A1 - Perkola, N. A1 - Balzamo, S. A1 - Cotman, M. A1 - Gökcen, T. A1 - Gardia-Parège, C. A1 - Budzinski, H. A1 - Lalère, B. T1 - A project to deliver reliable measurements of estrogens for better monitoring surveys and risk assessments N2 - EDC WFD project to deliver reliable measurements of estrogens for better monitoring surveys and risk assessments. Collaboration between National Metrology Institutes and advanced research institutes from 6 European countries A Balance of expertise: development and certification of RM, proficiency tests / interlaboratory comparison design, method development and validation, standardisation A 3 years project: September 2019- August 2022 Strong engagement with stakeholders (Advisory Group) T2 - SETAC 2020 CY - Online meeting DA - 03.05.2020 KW - EDC KW - Endocrine disrupting chemicals PY - 2020 AN - OPUS4-51739 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Piechotta, Christian A1 - Philipp, Rosemarie A1 - Fettig, Ina A1 - Pfeifer, Dietmar A1 - Richter, Janine A1 - Panne, Ulrich T1 - A TBT reference method for European water legislation T2 - ANAKON 2013 CY - Essen, Germany DA - 2013-03-04 PY - 2013 AN - OPUS4-27720 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Piechotta, Christian A1 - Klyk-Seitz, Urszula-Anna A1 - Richter, Janine T1 - Alternative Methoden zur Arsenspezies-Analyse in Wasser und Biotaproben T2 - CANAS - Colloquium Analytische Atomspektroskopie CY - Leipzig, Germany DA - 2015-03-08 PY - 2015 AN - OPUS4-33644 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Piechotta, Christian A1 - Rothe, Robert A1 - Prewing, Linda T1 - Analyse von perfluorierten Chemikalien - LC-MS vs. GC-MS T2 - LC-MS in der Umweltanalytik 2012 CY - Leipzig, Germany DA - 2012-06-11 PY - 2012 AN - OPUS4-26048 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Richter, Janine A1 - Lischka, Susanne A1 - Piechotta, Christian T1 - Analysis of arsenic species in fish after derivatization by GC-MS N2 - The derivatization of organoarsenic compounds by different reagents like thioglycolates or dithiols and the subsequent analysis by GC–MS as a molecular specific technique was investigated and described. The possible derivatization reagents methyl- and ethylthioglycolate (TGM and TGE), 1,3-propane- and 1,5-pentanedithiol (PDT and PeDT), which transfer the polar and nonvolatile analytes dimethylarsenate (DMA), monomethylarsonate (MMA), arsenite and arsenate into volatile compounds, were evaluated. The application for real samples like fish material was also studied. In addition the gas chromatographic separation and resolution was optimized and experiments were carried out to determine the highest derivatization rates. Derivatization reagents were evaluated in terms of quantity and stability of the formed chemical species. All derivatization products were characterized by mass spectrometry in order to identify the separated arsenic species. The most efficient conversion of DMA and MMA was observed by using ethylthioglycolate as derivatization agent. Finally, the derivatization procedure and the GC–MS-method were validated to determine linearity, precision, selectivity, analytical limiting values and recoveries. For the proposed method a limit of detection (LOD) of 5.8 pg for DMA and 14.0 pg for MMA was found. The accuracy was established by comparing the mean value measured for DMA in the certified reference material BCR-627 (tuna fish) with the certified one. MMA was not quantified in marine samples due to its low content. In shrimp samples DMA was not detectable. For codfish a DMA-content of 0.20±0.004 mg kg-1, for 'Surströmming' an amount of 0.38±0.02 mg kg-1 and for herring, which showed the highest amount of DMA, a content of 1.15±0.03 mg kg-1 was determined. KW - Arsenic species analysis KW - Monomethylarsonate KW - Dimethylarsenate KW - Derivatization KW - Gas chromatography KW - Mass spectrometry PY - 2012 U6 - https://doi.org/10.1016/j.talanta.2012.10.021 SN - 0039-9140 VL - 101 SP - 524 EP - 529 PB - Elsevier CY - Amsterdam AN - OPUS4-26931 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Piechotta, Christian T1 - Analytik arsenorganischer Verbindungen In Umweltproben N2 - Seit 1968 wird durch Lunde vermutet, dass sich lipidlösliche Arsenverbindungen im Muskelgewebe fettreicher Fische, wie dem Hering (clupea harengus) anreichern. Obwohl marine Organismen ausgiebig untersucht worden sind, gibt es bisher wenige Arbeiten zur analytischen Charakterisierung dieser Spezies. In den 60iger Jahren konnte Gulbrand Lunde erstmalig den Arsengehalt in Fischölen von bis zu 20 mg/kg bestimmen. Seitdem wurden drei Klassen an Arsenolipiden identifiziert und in Ansätzen charakterisiert: Arsenokohlenwasserstoffe (As-HC), Arsenofettsäuren (As-FA) und die Arsenozuckerphospholipide (As-SugPL). In der vorzustellenden Arbeit konnten erstmalig mehr als 20 fettlösliche Arsenolipide in Heringsfilet mittels der Kopplungen HPLC-ICP-MS und ESI-Q-TOF-MS identifiziert und semiquantifiziert werden. Dabei erfolgte die strukturelle Zuordnung über die exakten Massen und durch gezielte MS-MS-Experimente, deren Fragmente eine eindeutige Charakterisierung ermöglichten. Es konnten bisher unbekannte Arsenolipide im Hering nachgewiesen werden. Eine Untersuchung weiterer Fischarten ergab, dass diese Arsenverbindungen in unterschiedlichen marinen Speisefischen weiter verbreitet sind, als bisher angenommen. In Stoffwechselstudien konnte gezeigt werden, dass es zu einer erhöhten Konzentration des kanzerogenen Dimethylarsinats (DMA) in menschlichem Urin nach dem Verzehr von Hering kommt. Weiterhin konnte aufgrund der Ergebnisse eventuell im Hering enthaltenes anorganisches Arsen, Monomethylarsonat und DMA als Ursache ausgeschlossen werden. Da Arsenobetain nachweislich nicht im menschlichen Körper metabolisiert wird, sind die in den durchgeführten Arbeiten erzielte Ergebnisse zweckdienlich, die These zu bestärken, dass die identifizierten Arsenolipide zu DMA abgebaut werden können. T2 - GDCh AK Umweltmonitoring CY - Berlin, Germany DA - 05.07.2016 KW - Arsenolipide PY - 2016 AN - OPUS4-38520 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Piechotta, Christian A1 - Arroyo-Abad, Uriel A1 - Mattusch, J. A1 - Lischka, Susanne T1 - Analytische Betrachtung von neu identifizierten Arsenolipiden in Hering T2 - LC-MS in der Umweltanalytik 2014 CY - Leipzig DA - 2014-06-16 PY - 2014 AN - OPUS4-31855 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Piechotta, Christian A1 - Sommerfeld, Thomas A1 - Swart, Claudia A1 - Win, Tin A1 - Lück, Detlef A1 - Haarich, M. A1 - Nehls, Irene T1 - Arsen- und Quecksilberspezies in Fisch T2 - 4. Conference über Ionenanalyse, Technische Universität Berlin CY - Berlin, Germany DA - 2007-03-12 PY - 2007 AN - OPUS4-14307 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Piechotta, Christian A1 - Sommerfeld, Thomas A1 - Swart, Claudia A1 - Haarich, M. A1 - Win, Tin A1 - Lück, Detlef A1 - Nehls, Irene T1 - Arsenic and Mercury speciation in fish T2 - GSF Speciation 2008 CY - Munich, Germany DA - 2008-05-25 PY - 2008 AN - OPUS4-17790 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Piechotta, Christian A1 - Lischka, Susanne A1 - Arroyo-Abad, Uriel A1 - Mattusch, J. A1 - Panne, Ulrich T1 - Arsenolipide im Hering - Eine Quelle für kanzerogene Arsenverbindungen im Urin? T2 - ANAKON 2013 CY - Essen, Germany DA - 2013-03-04 PY - 2013 AN - OPUS4-27858 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Arroyo-Abad, Uriel A1 - Mattusch, J. A1 - Reemtsma, T. A1 - Piechotta, Christian T1 - Arsenolipids in commercial canned cod liver: An occurence and distribution study N2 - Arsenolipids (AsL) of the type arsenic-containing fatty acids (AsFA) and hydrocarbons (AsHC) are known to occur in seafood and their identification is today a challenge due to the need of data for toxicological assessment. The aim of this investigation was to enhance the data concerning AsL in commercial canned cod liver. Therefore, the present study focuses on the quantification and identification of AsL by LC–ICP-MS combined with ESI-MS. The molecular structure of 17 AsL was elucidated on the basis of their exact mass and their product ion spectra and two new AsFA tentatively identified. The total arsenic concentration in four different canned cod liver analyzed by ICP-MS ranged from 2.6 to 5.5 mg As/kg with an extraction recovery of 98%. The AsL detected by RP-IPC–MS comprise 58–95% of the total arsenic content, indicating that AsL are a major class of arsenic in canned cod liver. Much of the AsL detected in the canned cod liver extracts are, however, not yet identified. Practical applications: The results obtained in the present research show the possibility to apply the current extraction and detection method in different biological samples for the determination of AsL. Additionally, this information can be used for further studies to assess the risk of AsL for consumer health. On the other hand, the MS/MS results could be used for the future identification of AsL without the ICP-MS detection and thus, low the cost of the analysis. KW - Arsenolipids KW - Canned cod liver KW - ESI-MS/MS KW - HPLC-ICP-MS/ESI-Q-TOF-MS KW - Marine fish PY - 2014 U6 - https://doi.org/10.1002/ejlt.201400144 SN - 1438-7697 SN - 1438-9312 VL - 116 SP - 1381 EP - 1387 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-31070 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Piechotta, Christian A1 - Köppen, Robert A1 - Becker, Roland T1 - Beschreibung des Verhaltens von organischen Schadstoffen unter umweltrelevanten Bedingungen N2 - Zu den letzten beiden Jahrestagungen der GUS wurden Verfahren und Methoden vorgestellt, die es gestatten, den Transfer von Schadstoffen aus Materialien und Produkten in die Umwelt unter umweltrelevanten Bedingungen beschreiben zu können. Dabei lag der Fokus auf den Materialien und der eingesetzten Umweltsimulationen. In einem sich anschließenden Schritt soll nun das Verhalten der freigesetzten organischen Schadstoffe unter den Bedingungen von realen und simulierten Umwelteinflüssen charakterisiert und beschrieben werden. Hier werden im Detail drei potentielle Schadstoffe betrachtet, die Inhaltsstoffe bzw. Additive in den jeweils eingesetzten Materialien sind. Im Falle von Polypropylen (PP) und Polystyrol (PS) handelt es sich um polybromierte Flammschutzmittel BDE 209 (Decabrom-diphenylether, als Einzelsubstanz) und HBCD (Hexabromcyclododecan, als technische Formulierung). Für das eingesetzte Polycarbonat ist BPA (Bisphenol A) als Schadstoff zu definieren, welcher unter umweltrelevanten Bedingungen freigesetzt wird. Im Rahmen der durchzuführenden Arbeiten sollen die aufgeführten prioritären Schadstoffe hinsichtlich möglicher Transformationsprozesse in Umwelt und Klärwerk charakterisiert werden. Die unter den Bedingungen der Ozonung, Chlorierung und UV-Bestrahlung erhaltenen Transformationsprodukte (TPs) sollen im Sinne einer Non-Target-Analytik identifiziert und eindeutig charakterisiert werden. Die Ergebnisse sollen mittels vorhandener Analysenverfahren, wie GC-EI-MS, HPLC-ESI-IT-MSn bzw. LC-MS/MS erzeugt bzw. abgesichert werden. Anhand der in der Struktur eindeutig zu beschreibenden Transformationsprodukte und der Charakterisierung von potentiellen Intermediaten sollen belastbare Reaktionswege und –mechanismen abgeleitet werden. T2 - 48. Jahrestagung der GUS CY - Blankenloch-Stutensee, Germany DA - 27.03.2019 KW - Transformationsprodukte KW - Schadstoffe KW - Umweltverhalten PY - 2019 AN - OPUS4-49799 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Piechotta, Christian A1 - Sommerfeld, Thomas A1 - Swart, Claudia A1 - Win, Tin A1 - Lück, Detlef A1 - Haarich, M. A1 - Nehls, Irene T1 - Bestimmung toxikologisch relevanter Schwermetall-Spezies in Fisch T2 - 36. Deutscher Lebensmittelchemikertag 2007 CY - Nuremberg, Germany DA - 2007-09-10 PY - 2007 AN - OPUS4-14605 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Piechotta, Christian A1 - Win, Tin A1 - Nehls, Irene T1 - Bestimmung von CAS in Klärschlämmen T2 - Jahrestagung 2006 der GDCh, Fachgruppe "Umweltchemie und Ökotoxikologie", Martin-Luther-Universität Halle-Wittenberg CY - Halle (Saale), Germany DA - 2006-10-04 PY - 2006 AN - OPUS4-12428 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Piechotta, Christian A1 - Iznaguen, Hassan A1 - Traub, Heike A1 - Feldmann, Ines A1 - Köppen, Robert A1 - Witt, Angelika A1 - Jung, Christian A1 - Becker, Roland A1 - Oleszak, Katrin A1 - Bücker, Michael A1 - Urban, Klaus A1 - Reger, Christian A1 - Ostermann, Markus T1 - Bewitterungsszenarien im Vergleich – Veränderungen in der Oberflächenmorphologie von Polypropylen (PP) und Polystyrol (PS) unter dem Aspekt des Austrags von polybromierten Flammschutzmitteln N2 - Gegenstand der vorzustellenden Arbeiten ist die Prüfung der Umwelt-beständigkeit und -verträglichkeit von Materialien und Produkten hinsichtlich der Emission von potenziellen Schadstoffen in die Umwelt. Hierzu werden chemisch-physikalische Einflüsse (Bewitterung) und mikrobielle Beanspruchungen an Modellmaterialien evaluiert. So werden die Freisetzungsraten von Schadstoffen in Abhängigkeit der Beanspruchung beschrieben. Als Modellmaterialien kommen die Polymere Polystyrol (PS) und Polypropylen (PP) zum Einsatz. Synergistische Effekte der Bewitterungsparameter und der mikrobiologischen Beanspruchung sollen dabei ebenso betrachtet werden, wie die gezielte Alterung. Auch findet eine Beschreibung des Verhaltens der ausgetragenen Schadstoffe in den Umweltkompartimenten Boden oder Wasser statt. Hier sind mit Hilfe der zu entwickelnden Screening- und non-Target-Analyseverfahren die Transformation und der Metabolismus durch Mikroorganismen zu beschreiben. Aus den Ergebnissen sollen Korrelationen zwischen den künstlichen Alterungsverfahren und realen Szenarien abgeleitet werden. T2 - 47. Jahrestagung der GUS CY - Blankenloch-Stutensee, Germany DA - 21.03.2018 KW - Schadstoffaustrag KW - Umweltsimulation KW - Bewitterung PY - 2018 SN - 978-981-18507-2-7 VL - 47 SP - 115 EP - 128 AN - OPUS4-49802 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Piechotta, Christian A1 - Iznaguen, H. A1 - Traub, Heike A1 - Feldmann, Ines A1 - Köppen, Robert A1 - Witt, Angelika A1 - Jung, Christian A1 - Becker, Roland A1 - Oleszak, K. A1 - Bücker, Michael A1 - Urban, Klaus A1 - Reger, Christian A1 - Ostermann, Markus T1 - Bewitterungsszenarien im Vergleich – Veränderungen in der Oberflächenmorphologie von Polypropylen (PP) und Polystyrol (PS) unter dem Aspekt des Austrags von polybromierten Flammschutzmitteln N2 - In addition to previously reported results on the simulated aging of polystyrene samples (PS) containing 1 wt. % hexabromocyclododecane (HBCD), we present the first results of our investigations of polypropylene (PP)-samples containing 0.1 wt. % BDE-209. All studied polymer samples were exposed to a defined weathering schedule in a climate chamber in accordance to regulation EN ISO 4892-3:2006.For the determination of BDE-209 in the collected rain water samples derived from the used climate chamber, the samples were prepared in accordance with a validated protocol. Before the analyses, each sample was spiked with 2 µL of isotopically labeled BDE-209 (13C10-BDE-209) to serve as internal standard (ISTD) in the performed stable isotope dilution analysis. Subsequently the samples were extracted with isooctane, the obtained aliquots of the extracts were concentrated to 200 µL and 2 µL of the resulting solution were injected to the GC/MS for quantification. Additionally, the total bromine contents are monitored for the aged and untreated samples using laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) as well as X-ray fluorescence analysis (XRF) as non-destructive and rapid method. Furthermore, results from surface analysis using environmental scanning electron microscopy (ESEM) for morphological characterization of the aged and untreated samples were presented and discussed. In general, the resulting data from the accelerated aging will be compared to those from the natural weathering experiments (“atmospheric exposure”, in soil). The atmospheric exposure was performed by placing the samples on a weathering rack, which is aligned in SW direction (in a 45° angle to the horizon). The weathering data were regularly recorded by Deutscher Wetterdienst at this site. The surfaces of the test specimens (aged and stored references) were analyzed by ESEM as well as by LA-ICP-MS and by XRF. The surface of PS and PP specimens aged outdoors present the aging under real conditions and allow the comparison to the accelerated aged specimens by means of the weathering chamber. This way, we explore the efficiency of the accelerated aging procedure, which provides the advantage of well-defined and reproducible conditions compared to natural weathering, as a tool for testing different plastic materials. Additionally “in soil” experiments were conducted in-door in a well characterized testing soil. The soil (boulder-clay, sand with 12 % loam, particle size in total 0.2-4 mm) is filled in a free-draining concrete basin inside of an air-conditioned room. In this manner, TOC, water capacity and humidity are recorded parameters. To assure a washing out process from the samples by the raining water, the target water content is calculated to 8%. The actual humidity is measured by a tensiometer, assuring the duration of the raining period. The water content is additionally monitored by weight of the basin, capturing water from raining periods. The correct humidity is a fundamental parameter for biological activity. Samples of PS resp. PP were of dimension 10x1cm and 5 specimens were placed up to the half in the soil per basin. Microbial activity of the soil, monitored by the reference polyurethane, sets HBCD resp. BDE-209 of the samples free and will be leached from the samples by raining water. Thereafter these will be captured by passive samplers placed in a distinct distance to the samples in the soil. The “in soil” experiments are complementary to the weathering experiments due to the biological activity in the soil. These experiments simulate the fate of the brominated flame retardants in the biosphere. N2 - Gegenstand der vorzustellenden Arbeiten ist die Prüfung der Umweltbeständigkeit und -verträglichkeit von Materialien und Produkten hinsichtlich der Emission von potenziellen Schadstoffen in die Umwelt. Hierzu werden chemisch-physikalische Einflüsse (Bewitterung) und mikrobielle Beanspruchungen an Modellmaterialien evaluiert. So werden die Freisetzungsraten von Schadstoffen in Abhängigkeit der Beanspruchung beschrieben. Als Modellmaterialien kommen die Polymere Polystyrol (PS) und Polypropylen (PP) zum Einsatz, die jeweils mit polybromierten Flammschutzmitteln (PBFSM) versehen sind. Synergistische Effekte der Bewitterungsparameter und der mikrobiologischen Beanspruchung sollen dabei ebenso betrachtet werden, wie die gezielte Alterung. Auch findet eine Beschreibung des Verhaltens der ausgetragenen Schadstoffe in den Umweltkompartimenten Boden oder Wasser statt. Hier sind mit Hilfe der zu entwickelnden Screening- und non-Target-Analyseverfahren die Transformation und der Metabolismus durch Mikroorganismen zu beschreiben. Auch soll mit Hilfe der RFA und der LA-ICP-MS die Abreicherung der PBFSM in den Modellmaterialien beschrieben werden. Aus den Ergebnissen sollen Korrelationen zwischen den künstlichen Alterungsverfahren und realen Szenarien abgeleitet werden. T2 - 47. Jahrestagung der GUS 2018 CY - Stutensee - Blankenloch, Germany DA - 21.03.2018 KW - Polypropylen KW - Polystyrol KW - Flammschutzmittel KW - XRF KW - LA-ICP-MS PY - 2018 AN - OPUS4-47024 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Piechotta, Christian A1 - Köppen, Robert A1 - Becker, Roland A1 - Traub, Heike A1 - Ostermann, Markus T1 - Changes in polymer surface morphology and leaching of brominated flame retardants induced by different weathering scenarios N2 - In addition to previously reported results on the accelerated weathering of polystyrene samples (PS) containing 1 wt.% hexabromocyclododecane (HBCD), we present the first results of our investigations of polypropylene samples (PP) containing 0.1 wt.% BDE-209. All studied polymer samples were exposed to a defined weathering schedule in a climate chamber in accordance to regulation EN ISO 4892-3:2006. For the determination of BDE-209 in the collected raining water the samples were prepared in accordance to a validated protocol. Before the analyses each sample was spiked with isotopically labeled BDE-209. Subsequently the samples were extracted with isooctane. The obtained extracts were concentrated, and the resulting solutions were analyzed by GC/MS. Additionally, the total bromine content was monitored for the weathered and untreated samples using laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) and X-ray fluorescence analysis (XRF) as a non-destructive and rapid method. In general, the resulting data from the accelerated weathering will be compared to those from the natural weathering experiments. Here, the surfaces of the test pieces were analyzed by LA-ICP-MS and XRF as well. Moreover, soil bed tests were conducted in a well characterized model soil. This soil (boulder-clay, sand with 12 % loam, particle size in total 0.2-4 mm) is filled in a free-draining basin inside of an air-conditioned cellar. In this manner, TOC, water capacity and humidity are recorded parameters. To induce a leaching process from the samples by the raining water, the target water content is calculated to 8%. The actual humidity is measured by a tensiometer, assuring the duration of the raining period. A defined humidity is a fundamental parameter for a biological activity in the soil. The test polymers were placed up to the half in the soil. Microbial activity of the soil is monitored by a reference polymer (polyurethane) and should induce the release of HBCD and BDE-209 out of the test materials. These released analytes will be captured by passive samplers (silicone tubes) placed in a distinct distance to the polymer samples in the soil. The soil bed experiments are complementary to the weathering experiments due to the biological activity in the soil. T2 - ANAKON 2019 CY - Münster, Germany DA - 25.03.2019 KW - BFR KW - LA-ICP-MS KW - XRF KW - Polymer PY - 2019 N1 - Folien in deutscher Sprache, Votrag, Titel und Abtract in englischer Sprache AN - OPUS4-49796 LA - mul AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schmidt, Sebastian A1 - Piechotta, Christian A1 - Godejohann, M. A1 - Win, Tin A1 - Nehls, Irene A1 - Mügge, C. T1 - Characterisation of commercially available linear alkylbenzenesulfonates by LC-SPE-NMR/MS (liquid chromatography-solid phase extraction-nuclear magnetic resonance spectroscopy-mass spectroscopy) N2 - Commercially available linear alkylbenzenesulfonates (LASs) are a mixture of various homologues and isomers, leading to 20 major species. In this work we investigated the commercial product by liquid chromatography-solid phase extraction-nuclear magnetic resonance spectroscopy-mass spectrometry (LC-SPE-NMR/MS). The commercial product was separated into 17 fractions by liquid chromatography (LC). After chromatographic separation, 5% of the flow was split to a mass spectrometer (MS) while 95% was send to post-column solid phase extraction cartridges for enrichment of the analytes (LC-SPE). After elution from the SPE-cartridges a NMR-spectrometer equipped with a cryo-probe was used for the characterisation of the different LASs species. For the first time H-1-1D and H-H-COSY spectra for 14 LASs species out of 20 major isomers are presented, whereas the 6 remaining species are detected as mixtures in 3 H-1-1D and H-H-COSY spectra. These data were used to correlate the chromatographic retention of the LASs isomers to the substitution pattern of the alkyl chain. KW - Linear alkylbenzenesulfonates KW - NMR KW - SPE KW - Liquid chromatography KW - Mass spectrometry KW - Surfactants PY - 2010 U6 - https://doi.org/10.1016/j.talanta.2010.04.011 SN - 0039-9140 VL - 82 IS - 1 SP - 143 EP - 150 PB - Elsevier CY - Amsterdam AN - OPUS4-24004 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Piechotta, Christian A1 - Kuhlich, Paul A1 - Maul, R. T1 - Characterization of new disinfection by-products of polycyclic musks (AHTN and HHCB) and their metabolites N2 - The polycyclic musks 6-Acetyl-1,1,2,4,4,7-hexamethyltetraline (AHTN) and 1,3,4,6,7,8-Hexahydro-4,6,6,7,8,8-hexamethylcyclopenta-ɣ-2-benzopyran (HHCB) are widely used fragrances in cosmetics, products of daily care and cleaning products for households and industry. They are in the focus of interest due to their estrogenic potential. Both compounds can be found at low μg/L concentrations in surface water where they are introduced mainly by sewage treatment plants supplied by municipal wastewater. In order to disinfect wastewater in sewage treatment plants or water in swimming pools, chlorine can be added to water as gas or hypochlorite solution. This disinfectant has a high oxidation potential resulting in the formation of disinfection by-products, the estrogenicity and toxicity of which might differ from their precursor. In this work the behaviour of AHTN and HHCB upon treatment with sodium hypochlorite solution was investigated and chlorinated possible disinfection by-products could be identified as well as a carboxylic acids and lactones derived from AHTN and HHCB. The identified species were characterized by GC-MS, LC-MSn and 1H-NMR. The elucidated structures of potential disinfection by-products are verified by X-ray crystallography. Finally the estrogenicity between the parent analytes and generated transformation products were compared. For that task, MCF-7 assay has been chosen for being most relevant to humans. Moreover metabolism studies were carried out using AHTN, HHCB and their disinfection by-products. T2 - ISEB 2016 CY - Barcelona, Spain DA - 30.05.2016 KW - AHTN PY - 2016 AN - OPUS4-38523 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone A1 - Deubel, Jan A1 - Raspe, Tina A1 - Fettig, Ina A1 - Piechotta, Christian T1 - Chemische Brandspurenanalytik T2 - Vfdb 2012 -Jahresfachtagung CY - Köln, Deutschland DA - 2012-05-21 KW - Brandbeschleuniger KW - Brandgase KW - Brand KW - Partikel KW - Analytik PY - 2012 SP - 517 EP - 539 PB - VdS Schadenverhütung CY - Köln AN - OPUS4-25933 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Piechotta, Christian A1 - Krüger, Simone A1 - Fettig, Ina A1 - Deubel, Jan A1 - Riexinger, D. A1 - Raspe, Tina A1 - Nehls, Irene T1 - Chemische Brandspurenanalytik - Methoden zum Nachweis von Brandbeschleunigern in Brandrückständen T2 - ANAKON 2011 CY - Zurich, Switzerland DA - 2011-03-22 PY - 2011 AN - OPUS4-23251 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Thinnes, A. A1 - Westenberger, M. A1 - Piechotta, Christian A1 - Letho, L. A1 - Wirth, F. A1 - Lau, H. A1 - Klein, J. T1 - Cholinergic and metabolic effects of metformin in mouse brain N2 - Metformin is widely used as a first-line treatment for type 2 diabetes, but central effects of metformin have received little attention. When metformin (200 mg/kg i.p.) was administered to C57Bl6 mice, metformin concentration in cerebrospinal fluid peaked at 29 μM after 30 min but dropped quickly and was low at 90 min. In mouse hypothalamus sampled by microdialysis, systemically administered metformin caused minor and transient increases of acetylcholine, glucose and lactate while choline levels decreased. When metformin (0.2−10 mM) was locally infused via retrodialysis, there was a short-lasting increase of acetylcholine in the hypothalamus. Extracellular lactate levels in hypothalamus showed a massive increase upon metformin infusion while glucose levels decreased. In isolated mitochondria of mouse brain, metformin inhibited oxygen consumption and the activity of complex I. Inhibition of mitochondrial respiration likely explains lactate formation in the brain during metformin infusion which may cause lactic acidosis during metformin intoxication. The changes of cholinergic activity in the hypothalamus may be associated with appetite suppression observed during metformin treatment. KW - Metformin KW - Blood-brain barrier KW - Lactate KW - Glucose KW - Microdialysis KW - Hypothalamus PY - 2021 U6 - https://doi.org/10.1016/j.brainresbull.2021.02.018 SN - 0361-9230 VL - 170 SP - 211 EP - 217 PB - Elsevier CY - Amsterdam, Niederlande AN - OPUS4-52189 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kalbe, Ute A1 - Bandow, Nicole A1 - Bredow, Andrea A1 - Mathies, Helena A1 - Piechotta, Christian T1 - Column leaching tests on soils containing less investigated organic pollutants N2 - Column tests are a common tool to investigate the leaching behavior of contaminated soil and waste materials. In contrast to inorganic analytes, fewer studies with organic contaminants are available based on column tests. This paper is aimed at the question if soil materials contaminated with organic pollutants can be reliably investigated by column tests. Soils contaminated with TPH (total petrol hydrocarbons), PFC (perfluorinated surfactants) and the biocide tebuconazole were used for column percolation tests. Differences in the leaching behavior are mainly driven by partitioning behavior between organic carbon and water, which can be estimated from log KOW values and size and shape of molecules. PFC show higher release (10–50% for individual compounds) than pesticides (3.7–5.3%) and TPH (< 1%) at liquid to solid ratio of 4 l/kg. All eluate concentrations are low with maximum concentrations of 50 µg/l for PFC and 1–2 mg/l for pesticides and TPH. Despite this, the observed standard deviations are quite small suggesting good repeatability. In general the observed concentration trends are similar to that from lysimeter studies found in the literature and thus, it can be concluded that laboratory column experiments are a reliable tool for organic compounds with various physico-chemical properties. KW - Column percolation leaching KW - Total petrol hydrocarbons KW - Perfluorinated surfactants KW - Pesticides PY - 2014 U6 - https://doi.org/10.1016/j.gexplo.2014.06.014 SN - 0375-6742 VL - 147 IS - Part B SP - 291 EP - 297 PB - Elsevier CY - Amsterdam [u.a.] AN - OPUS4-32144 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Piechotta, Christian A1 - Schmidt, Sebastian A1 - Win, Tin A1 - Nehls, Irene T1 - Commercial Linear Alkylbenzene Sulonates (LAS)-Analysis by GC-FID/MS- T2 - WetPol 2009 CY - Barcelona, Spain DA - 2009-09-21 PY - 2009 AN - OPUS4-19978 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Piechotta, Christian A1 - Schmidt, Sebastian A1 - Win, Tin A1 - Nehls, Irene T1 - Commercial Linear AlkylbenzeneSulfonate (LAS) - Analysis by GC-FID/MS and 1H-qNMR - T2 - 5. Conference über Ionenanalyse CY - Berlin, Germany DA - 2009-03-02 PY - 2009 AN - OPUS4-19017 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Piechotta, Christian A1 - Kuhlich, P. A1 - Maul, R. T1 - Desinfektionsnebenprodukte und Metaboliten ausgewählter Inhaltsstoffe in Personal Care Products (PCP) am Beispiel synthetischer Moschusverbindungen N2 - Inhaltsstoffe von Personal Care Products können zunehmend in der aquatischen Umwelt nachgewiesen werden. Dabei handelt es sich um Inhaltsstoffe von Kosmetikartikeln, Medikamenten oder Reinigungsmitteln. Der Eintrag erfolgt größtenteils über kommunale Kläranlagen, die die Analyten nicht komplett zurückhalten können. Zu diesen Verbindungen zählen im Rahmen dieser Arbeit die Moschusdüfte 6-Acetyl-1,1,2,4,4,7-hexamethyltetraline (AHTN) und 1,3,4,6,7,8-Hexahydro-4,6,6,7,8,8-hexamethylcyclopenta-gamma-2-benzopyran (HHCB). Diese Analyten können im μg/L- bzw. ng/L-Bereich im Oberflächenwasser nachgewiesen werden. Zur Desinfektion von Wasser für Schwimmbäder oder zur Gewinnung von Trinkwasser werden hypochlorithaltige Chemikalien oder Ozon eingesetzt, um Mikroorganismen zu vernichten, wobei unter anderem auch Desinfektionsnebenprodukte (DBP – Disinfection By-Products) von PCPs gebildet werden können. In dieser Arbeit werden erste neue DBPs präsentiert, die durch Ozonierung oder Chlorierung mittels Natriumhypochlorit aus den genannten Chemikalien in Modellreaktoren hervorgingen. Auch werden die dazu gehörigen Strategien zu deren Identifizerung und Charakterisierung vorgestellt. Hier kommen diverse chromatographische Verfahren, wie LC-MS/MS, LC-MSn, aber auch GC-MS und die 1H- bzw. 13C-NMR zum Einsatz. In einem zweiten Ansatz werden erste Phase-I-Metaboliten dieser Verbindungen gezeigt, die beim Umsatz in Modellsystemen mit Human- und Rattenlebermikrosomen entstanden sind. T2 - ANAKON 2017 CY - Tübingen, Germany DA - 03.04.2017 KW - AHTN KW - Synthetische Moschusverbindungen KW - Transformation PY - 2017 AN - OPUS4-40260 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Arroyo-Abad, Uriel A1 - Lischka, Susanne A1 - Piechotta, Christian A1 - Mattusch, J. A1 - Reemtsma, T. T1 - Determination and identification of hydrophilic and hydrophobic arsenic species in methanol extract of fresh cod liver by RP-HPLC with simultaneous ICP-MS and ESI-Q-TOF-MS detection N2 - The present study was focused on the determination and identification of arsenic species in methanolic extracts of cod liver. Arsenic species were fractionated and the fractions analysed by RP-HPLC-ICP-MS coupled with ESI-Q-TOF-MS. The total concentration of arsenic in the fresh cod liver was analysed by ICP-MS to be 1.53 ± 0.02 mg As kg-1 w.w. and the extraction recovery was ca. 100% and the column recovery >93%. Besides polar inorganic and methylated arsenic species (>70%) more hydrophobic arsenic-containing fatty acids and hydrocarbons occurred. Based on the mass spectrometric data proposals for molecular structures were elaborated for 20 of the organic As species included 10 arsenic-containing fatty acids (AsFA) and an arsenic-containing hydrocarbon (AsHC) mentioned for the first time in fresh cod liver. Arsenobetaine was found as main water-soluble arsenic compound in cod liver followed by higher molecular mass arsenic-containing fatty acids and hydrocarbons. KW - Arsenic species KW - Arsenolipids KW - Marine fish KW - Cod liver KW - HPLC-ICP-MS/ESI-Q-TOF-MS PY - 2013 U6 - https://doi.org/10.1016/j.foodchem.2013.05.152 SN - 0308-8146 VL - 141 IS - 3 SP - 3093 EP - 3102 PB - Elsevier CY - Amsterdam [u.a.] ; Jena AN - OPUS4-28852 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Piechotta, Christian A1 - Schmidt, Sebastian A1 - Schwarz, Gunnar A1 - Win, Tin A1 - Nehls, Irene T1 - Determination and Quantification of LAS-isomers using GC-MS and GC-FID T2 - EMEC 9 CY - Girona, Spain DA - 2008-12-03 PY - 2008 AN - OPUS4-18394 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Piechotta, Christian A1 - Schmidt, Sebastian A1 - Schwarz, Gunnar A1 - Win, Tin A1 - Nehls, Irene T1 - Determination and quantification of LAS-siomers using GC-MS and GC-FID T2 - ICS 2008 CY - Münster, Germany DA - 2008-09-21 PY - 2008 AN - OPUS4-17791 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Arroyo-Abad, Uriel A1 - Pfeifer, M. A1 - Mothes, S. A1 - Stärk, H.-J. A1 - Mattusch, J. A1 - Reemtsma, T. A1 - Piechotta, Christian T1 - Determination of moderately polar arsenolipids and mercury speciation in freshwater fish of the River Elbe (Saxony, Germany) N2 - Arsenic and mercury are frequent contaminants in the environment and care must be taken to limit their entrance into the food chain. The toxicity of both elements strongly depends upon their speciation. Total amounts of As and Hg as well as their species were analyzed in muscle and liver of 26 fishes of seven freshwater fish species caught in the River Elbe. The median concentrations of As were 162 mg kg-1 w.w. in liver and 92 mg kg-1 w.w. in muscle. The median concentrations of total Hg were 241 mg kg-1 w.w. in liver and 256 mg kg-1 w.w. in muscle. While this level of Hg contamination of the freshwater fish in the River Elbe is significantly lower than 20 years ago, it exceeds the recommended environmental Quality standard of 20 mg Hg kg-1 w.w. by a factor of 5e50. However, the European maximum level of 500 mg Hg kg-1 for fish for human consumption is rarely exceeded. Arsenic-containing fatty acids and hydrocarbons were determined and partially identified in methanolic extracts of the fish by HPLC coupled in parallel to ICP-MS (element specific detection) and ESI-Q-TOF-MS (molecular structure detection). While arsenobetaine was the dominant As species in the fish, six arsenolipids were detected and identified in the extracts of liver tissue in common bream (Abramis brama), die (Leuciscus idus), asp (Aspius aspius) and northern pike (Esox lucius). Four arsenic-containing fatty acids (AsFA) and two arsenic-containing hydrocarbons (AsHC) are reported in freshwater fish for the first time. With respect to mercury the more toxic MeHgþ was the Major species in muscle tissue (>90% of total Hg) while in liver Hg2þ and MeHgþ were of equal importance. The results Show the high relevance of element speciation in addition to the determination of total element concentrations to correctly assess the burden of these two elements in fish. KW - Element species KW - Freshwater fish KW - Metal contamination KW - Arsenolipids PY - 2016 U6 - https://doi.org/10.1016/j.envpol.2015.10.015 SN - 0269-7491 VL - 208 SP - Part B, 458 EP - 466 PB - Elsevier Ltd. AN - OPUS4-35399 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Piechotta, Christian A1 - Sommerfeld, Thomas A1 - Win, Tin A1 - Nehls, Irene T1 - Determination of Tributyltin (TBT) at sub-ppt level in waters samples T2 - TraceSpec 2009 CY - Mainz, Germany DA - 2009-09-15 PY - 2009 AN - OPUS4-19977 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Piechotta, Christian A1 - Klyk-Seitz, Urszula-Anna A1 - Cossmer, Antje A1 - Nehls, Irene T1 - Determination of Tributyltin (TBT) at Sub-ppt Level in Whole Water Samples T2 - The Future of Reference Materials - Science and Innovation - IRMM CY - Geel, Belgium DA - 2010-11-23 PY - 2010 AN - OPUS4-22457 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - von Törne, Wipert Jannik A1 - Klyk-Seitz, Urszula-Anna A1 - Piechotta, Christian T1 - Developing a GC-EI-MS/MS method for quantifying warfarin and five hydroxylated metabolites generated by the Fenton reaction N2 - AbstractSince the 1950s, Warfarin has been used globally as both a prescription drug and a rodenticide. Research has shown that warfarin and other rodenticides are present in the environment and food chain. However, emerging contaminants are subject to degradation by biotic and abiotic processes and advanced oxidation processes. In some cases, detecting the parent compound may not be possible due to the formation of structurally changed species. This approach aims to identify hydroxylated transformation products of warfarin in a laboratory setting, even after the parent compound has undergone degradation. Therefore, the Fenton reaction is utilized to insert hydroxylation into the parent compound, warfarin, by hydroxyl and hydroperoxyl radicals generated by Fe2+/Fe3+ redox reaction with hydrogen peroxide. Using multiple reaction monitoring, a GC–MS/MS method, incorporating isotopically labeled reference compounds, is used to quantify the expected derivatized species. The analytes are derivatized using trimethyl-3-trifluoromethyl phenyl ammonium hydroxide, and the derivatization yield of warfarin is determined by using isotopically labeled reference compounds. The method has a linear working range of 30 to 1800 ng/mL, with detection limits ranging from 18.7 to 67.0 ng/mL. The analytes are enriched using a C18-SPE step, and the recovery for each compound is calculated. The Fenton reaction generates all preselected hydroxylated transformation products of warfarin. The method successfully identifies that 4′-Me-O-WAR forms preferentially under the specified experimental conditions. By further optimizing the SPE clean-up procedures, this GC–MS-based method will be suitable for detecting transformation products in more complex matrices, such as environmental water samples. Overall, this study provides a better understanding of warfarin’s degradation and offers a robust analytical tool for investigating its transformation products. KW - Health, Toxicology and Mutagenesis KW - Pollution KW - Environmental Chemistry KW - General Medicine PY - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-595737 SN - 0944-1344 VL - 31 SP - 16986 EP - 16994 PB - Springer Science and Business Media LLC AN - OPUS4-59573 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Piechotta, Christian A1 - Sommerfeld, Thomas A1 - Win, Tin A1 - Nehls, Irene T1 - Development and validation of a method for the quantification of tributyltin at subnanogram per liter concentrations T2 - TraceSpec 2007 CY - Münster, Germany DA - 2007-09-04 PY - 2007 AN - OPUS4-14816 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Piechotta, Christian A1 - Wittstock, S. C. A1 - Fettig, I. A1 - Alasonati, E. A1 - Fisicaro, P. T1 - Development of an enzymatic digestion method for the quantification of mercury species in biota and fish N2 - The toxicity and transport mechanisms of mercury and its species in the environment are dependent on the chemical form. Here, the knowledge of the species analysis of organic and inorganic mercury compounds is of interest. Only measuring the total mercury content gives just a little information about the potential risk to human beings and the health of biota and fish respectively. In comparison methyl mercury is the more toxic species than the inorganic form due to its solubility in lipids and it binds strongly to bio ligands like sulfur containing amino acids bound in proteins. This could affect the functionality of enzymes. A variety of analytical methods have been used for the measurement of mercury species like liquid and gas chromatographic separation and the detection by inductively coupled plasma mass spectrometry and common electron impact mass spectrometry. T2 - Workshop on mercury monitoring and regulation CY - Berlin, Germany DA - 04.04.2017 KW - Methyl mercury KW - Enzymatic digestion KW - Fish PY - 2017 AN - OPUS4-40246 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Piechotta, Christian A1 - Steinhäuser, Lorin A1 - Lardy-Fontan, S. A1 - Lalere, B. A1 - Le Diouron, V. A1 - Heath, E. A1 - Ana Kovačič, A. A1 - Potalivo, M. A1 - de Zorzi, P. A1 - Centioli, D. A1 - Naykki, T. A1 - Viidanoja, J. A1 - Gökcen, T. A1 - Budzinski, H. A1 - Le Menach, K. A1 - Selih, V. T1 - EDC-WFD: A project to deliver reliable measurements for better monitoring survey and risks assessments. N2 - Monitoring programs should generate high-quality data on the concentrations of substances and other pollutants in the aquatic environment to enable reliable risk assessment. Furthermore, the need for comparability over space and time is critical for analysis of trends and evaluation of restoration of natural environment. Additionally, research work and exercises at the European level have highlighted that reliable measurements of estrogenic substances at the PNEC level are still challenging to achieve. The project EDC-WFD Metrology for monitoring endocrine disrupting compounds under the EU Water Framework Directive aims to develop traceable analytical methods for determining endocrine disrupting compounds and their effects, with a specific focus on three estrogens of the first watch list (17-beta-estradiol (17βE2), 17-alpha-ethinylestradiol (EE2), and estrone (E1)). Estrogens 17-alpha-estradiol (17E2) and estriol (E3) will be included to demonstrate the reliability of the developed methods and to support the requirements of Directive 2013/39/EC, Directive 2009/90/EC and Commission Implementation Decision (EU) 2018/840, hence improving the comparability and compatibility of measurement results within Europe. During the EDC-WFD project four selected effect-based methods (EBM) will be deeply investigated in order to improve their rationale use and their support in water quality assessment. In particular, the EBM sensitivity, specificity and accuracy on reference materials with single or mixture solutions of the five substances at a concentration of EQS values will be explored. This contribution will present the objectives and methods applied within the EDC-WFD project. T2 - EuChemS CY - Lisbon, Portugal DA - 29.08.2022 KW - WFD KW - Estrogens KW - Whole water samples KW - EQS PY - 2022 AN - OPUS4-57096 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Muelow-Stollin, Ulrike A1 - Lehnik-Habrink, Petra A1 - Kluge, Stephanie A1 - Bremser, Wolfram A1 - Piechotta, Christian T1 - Efficiency Evaluation of Extraction Methods for Analysis of OCPs and PCBs in Soils of Varying TOC N2 - Organochlorine pesticides and polychlorinated biphenyls are toxic, carcinogenic, and have a high potential for bioaccumulation. Due to their stability, they are still considered an environmental problem even though the use of most of them has been phased out several decades ago. Soil is a matrix which can retain these contaminants to a great extent. This ability is often associated with the total organic carbon content (TOC). In order to judge the pollution status of soil and to make monitoring data more easily comparable a simple, yet robust extraction method is needed. Agitation solid-liquid-extraction is well suited for this purpose. However, the influence of TOC on the analyte recovery has to be known. For the presented study, 12 organochlorine pesticides and 7 polychlorinated biphenyls were spiked into four model soils with organic carbon contents between 1.6% - 13.3%. The matrices were extracted using solid-liquid extraction between 45 minutes and 16 hours. For comparison, all soils were also extracted using pressurised liquid extraction and Soxhlet extraction. After clean-up the extracts were measured using a gas chromatography-mass spectrometry (GC-MS) system. Statistical analysis of the results implied that the TOC content of the soils did not have significant influence on the extraction efficiency. A longer solid-liquid extraction time did not necessarily increase analyte recovery: Extraction for one hour resulted in 88% recovery while 16 hour extraction led to 89%. Thus, the efficiency of all the methods was comparable for all model soils. Additional investigations regarding GC liner performance highlighted the need for isotopically labelled standards during the analysis of thermolabile pesticides. KW - POP KW - Soil organic matter KW - Solid-liquid-extraction KW - Pressurised liquid extraction PY - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-430238 SN - 2152-2219 VL - 08 IS - 06 SP - Article ID:77202, 693 EP - 713 PB - Scientific Research Publishing AN - OPUS4-43023 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - von Törne, Jannik Wipert A1 - Piechotta, Christian A1 - Karnstedt, L. T1 - Einblicke in das Transformationsverhalten von Warfarin N2 - Warfarin ist seit den 1950er Jahren einer der bekanntesten Gerinnungshemmer. Beim Menschen wird es bis heute zur Vorbeugung von Thrombose und der Behandlung von Vorhofflimmern und Arrhythmie eingesetzt. Doch schon einige Jahre vor der FDA Zulassung (U. S. Food and Drug Administration) als Medikament wurde es zur Bekämpfung von Nagetieren eingesetzt. Bis heute wurde es nur teilweise durch weitaus wirksamere antikoagulante Rodentizide (ARs) der zweiten Generation, sogenannte Superwarfarine, ersetzt. In der Fachliteratur finden sich zahlreiche Beispiele für sekundäre und tertiäre Vergiftung mit ARs bei Wildtieren und anderen Nichtzieltieren. Bisher ist relativ wenig über die Bioakkumulation, Persistenz und Toxizität von ARs und deren Transformationsprodukten (TPs) in der terrestrischen und aquatischen Umwelt, sowie der Nahrungskette bekannt. Um Einblicke in mögliche Transformations- und Abbauprozesse von Warfarin unter umweltrelevanten Bedingungen zu erhalten und um diese Einflüsse zu simulieren, wurde hierzu eine elektrochemische Reaktorzelle in Kopplung mit einem Massenspektrometer verwendet. So können mögliche Phase-I-Metabolite und sogenannte „oxidation products“ vorausgesagt werden. Hinsichtlich des Verhaltens während der Wasseraufbereitung in Kläranlagen wurden technisch relevante Prozesse wie Chlorung, UV-Bestrahlung und Ozonung in Modellen simuliert, um hier potenzielle Abbauwege und -prozesse aufzuklären. Gebildete Transformationsprodukte wurden daher mittels unterschiedlicher chromatografischer Verfahren getrennt und massenspektrometrisch identifiziert, charakterisiert und verglichen. T2 - 49. Jahrestagung der GUS 2020 CY - Stutensee, Blankenloch DA - 24.03.2021 KW - Warfarin KW - Transformationsprodukte KW - Umweltverhalten PY - 2021 SN - 978-3-9818507-6-5 VL - 49 SP - 265 EP - 272 AN - OPUS4-53963 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Piechotta, Christian A1 - Lischka, Susanne T1 - Einsatz eines isotopenmarkierten Kalibrierstandards zur Bestimmung von Arsenobetain mittels HPLC-ESI-MS/MS T2 - CANAS 2013 CY - Freiberg, Germany DA - 2013-03-18 PY - 2013 AN - OPUS4-27781 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Piechotta, Christian A1 - Pfeifer, Dietmar A1 - Schmidt, Sebastian A1 - Win, Tin A1 - Nehls, Irene T1 - Entwicklung eines LAS-Kalibrierstandards T2 - 4. Conference über Ionenanalyse CY - Berlin, Germany DA - 2007-03-12 PY - 2007 AN - OPUS4-14308 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Piechotta, Christian A1 - Kuhlich, Paul A1 - Win, Tin A1 - Nehls, Irene A1 - Panne, Ulrich T1 - Entwicklung eines simultanen Bestimmungs- und Anreicherungsverfahrens für Östrogene und östrogenwirksame Verbindungen in Abwasser T2 - ANAKON 2009 CY - Berlin, Germany DA - 2009-03-17 PY - 2009 AN - OPUS4-18222 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Piechotta, Christian A1 - Köppen, Robert A1 - Becker, Roland A1 - Traub, Heike A1 - Ostermann, Markus A1 - Bücker, Michael A1 - Reger, Christian A1 - Westphalen, Tanja T1 - Environmental sustainability and –stability of materials concerning the migration of pollutants N2 - In addition to previously reported results on the accelerated weathering of polystyrene samples (PS) containing 1 wt. % hexabromocyclododecane (HBCD), we present the first results of our investigations of polypropylene samples (PP) containing 0.1 wt. % BDE-209. All studied polymer samples were exposed to a defined weathering schedule in a climate chamber in accordance to regulation EN ISO 4892-3:2006. For the determination of BDE-209 in the collected raining water the samples were prepared in accordance to a validated protocol. Before the analyses each sample was spiked with isotopically labeled BDE-209. Subsequently the samples were extracted with isooctane. The obtained extracts were concentrated, and the resulting solutions were analyzed by GC/MS. Additionally, the total bromine content was monitored for the weathered and untreated samples using laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) and X-ray fluorescence analysis (XRF) as a non-destructive and rapid method. In general, the resulting data from the accelerated weathering will be compared to those from the natural weathering experiments. Here, the surfaces of the test pieces were analyzed by LA-ICP-MS and XRF as well. Moreover, soil bed tests were conducted in a well characterized model soil. This soil (boulder-clay, sand with 12 % loam, particle size in total 0.2-4 mm) is filled in a free-draining basin inside of an air-conditioned cellar. In this manner, TOC, water capacity and humidity are recorded parameters. To induce a leaching process from the samples by the raining water, the target water content is calculated to 8%. The actual humidity is measured by a tensiometer, assuring the duration of the raining period. A defined humidity is a fundamental parameter for a biological activity in the soil. The test polymers were placed up to the half in the soil. Microbial activity of the soil is monitored by a reference polymer (polyurethane) and should induce the release of HBCD and BDE-209 out of the test materials. These released analytes will be captured by passive samplers (silicone tubes) placed in a distinct distance to the polymer samples in the soil. The soil bed experiments are complementary to the weathering experiments due to the biological activity in the soil. T2 - Goldschmidt 2019 CY - Barcelona, Spain DA - 18.08.2019 KW - Pollutants KW - Environmental simulation KW - Migration PY - 2019 AN - OPUS4-49803 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Piechotta, Christian A1 - Iznaguen, H. A1 - Traub, Heike A1 - Feldmann, Ines A1 - Köppen, Robert A1 - Witt, Angelika A1 - Jung, Christian A1 - Becker, Roland A1 - Oleszak, K. A1 - Bücker, Michael A1 - Urban, Klaus A1 - Reger, Christian A1 - Ostermann, Markus T1 - Environmental sustainability and –stability of Materials concerning the Migration of pollutants N2 - MaUS is an acronym for ”Material und Umweltsimulationen“. Plastics are in the focus of environmental politics due to their long-term behaviour and therefore to their persistence. Not only that they appear as visible contaminants in the sea and on the beach, but their unknown behaviour concerning their additives as well as the related transformation products are anxious. Therefore, we wish to establish a certified reference method to provide a method for testing plastics. Aim of this project is the development of fast motion standard reference methods for testing plastics regarding to their environmental compatibility. To establish these testing methods, we use polystyrene (PS) and polypropylene (PP) with environmental relevant brominated flame retardants, known for their persistent bioaccumulative and toxic (PBT) properties. In case of PS the material contains 1 wt% of 1,2,5,6,9,10-hexabromocyclododecan (HBCD) and in case of PP 0.1 wt% bromodiphenylether (BDE-209), which is known as a substance of very high concern (SVHC). Furthermore, we use polycarbonate (PC), which is still used as material in baby flasks and releases Bisphenol A (BPA), an estrogenic active substance. As an additional material PTFE is used for its importance as a source for two ubiquitous environmental substances (PFOS and PFOA), whose toxicological effects are still incompletely known. The focus in this current work is set on the transfer of potential pollutants out of applied materials mentioned above into environmental compartments like water or soil. Here an accelerated aging concept should be developed to shortened time consuming natural processes. For these resulting simulations we use a programmable weathering chamber with dry and wet periods and with high and low temperatures. These programmes run for several weeks and according to a defined sampling schedule we take water samples, run a clean-up procedure by SPE (Molecular imprinted polymers (MiPs) resp. polymer-based cartridges (Waters Oasis HLB)) and analyse them by HPLC-UV resp. LC-MS/MS. Of most interest in case of flame retardants are photocatalytic transformation products. Therefore, we conduct a non-target-screening resp. a suspected target-screening by LC-MS/MS and HRMS. T2 - Project meeting PlasticsEurope - BAM CY - Leverkusen, Germany DA - 06.11.2018 KW - Environmental simulation KW - Pollutants PY - 2018 AN - OPUS4-47026 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -