TY - CONF A1 - Löhnert, Andrea A1 - Monreal, Nils A1 - Knaust, Christian A1 - Hofmann-Böllinghaus, Anja T1 - Advanced CFD modeling approach of smoke toxicity and light extinction for well ventilated and less well ventilated fires in compartment (Part II) N2 - Fire smoke contains a variety of highly toxic substances and can lead to unconsciousness within a few minutes and to death for critical concentrations. Currently the engineer’s methods of fire safety include various procedures to calculate the fire propagation and smoke spread in buildings. However, up to now the evaluation and calculation of smoke concerning its optical properties and toxic potential on the basis of a detailed combustion is still a field of research. Since smoke composition is highly variable and not fully characterised it has to be examined whether and how the Chemical composition and the optical properties of smoke are correlating. A method has been developed that establishes the relation between the smoke components and smoke toxicity. T2 - Interflam 2013 - 13th International fire science & engineering conference CY - Egham, Surrey, UK DA - 24.06.2013 PY - 2013 SN - 978-0-9556548-9-3 SP - 13 EP - 23 PB - Interscience Communications Limited AN - OPUS4-28981 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kaudelka, Sven A1 - Knaust, Christian A1 - Krause, U. T1 - Anwendung und Vergleich von Verfahren zur Berechnung der äquivalenten Branddauer im Industriebau N2 - Die äquivalente Branddauer tä wird zur Bestimmung der Feuerwiderstandsdauer erftp von Bauteilen in Industriebauten verwendet. Die Berechnung erfolgt bislang auf der Grundlage des normativenAnsatzes nach DIN 18230 (Verfahren I) und gilt im Zusammenhang mit der Muster-Industriebaurichtlinie (M IndBauRL). Im Rahmen von brandschutztechnischen Nachweisen für Industriebauten ist es ebenfalls möglich, die äquivalente Branddauer unter Anwendung numerischer Methoden zu berechnen (Verfahren II). Die Anwendung solcher Ingenieurmethoden des Brandschutzes ermöglichen die Berücksichtigung komplexer Gebäudegeometrien und Ventialtionsbedingungen sowie lokaler Brandwirkungen auf Bauteile infolge inhomogener Brandlastverteilungen. Am Beispiel einer Industriehalle werden die Verfahren I und II angewendet und die Ergebnisse gegenübergestellt. T2 - 11. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit CY - Köthen, Germany DA - 07.11.2013 KW - Äquivalente Branddauer KW - Numerische Simulation KW - Brandszenarien PY - 2013 SN - 978-3-86011-058-4 IS - P-02 SP - 1 EP - 4 AN - OPUS4-30226 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hofmann-Böllinghaus, Anja A1 - Knaust, Christian A1 - Krüger, Simone T1 - Brandverhalten von Bauprodukten: Brauchen wir Regelungen für die Menge und Giftigkeit der Rauchgase? T2 - 57. Jahresfachtagung der Vereinigung zur Förderung des Deutschen Brandschutzes e.V. (vfdb 2008) CY - Bochum, Deutschland DA - 2008-04-27 PY - 2008 N1 - Geburtsname von Hofmann-Böllinghaus, Anja: Hofmann, A. - Birth name of Hofmann-Böllinghaus, Anja: Hofmann, A. SP - 169 EP - 178 AN - OPUS4-17755 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dietrich, Matthes A1 - Knaust, Christian A1 - Arnold, L. A1 - Brüne, M. A1 - Festag, S. T1 - Buoyancy driven flow in an underground metro station for different climate conditions – experimental and numerical investigation N2 - In urban areas the demand for public transportation is constantly growing. Underground railway systems overcome the problem of limited space on the ground and are therefore one of the most powerful systems in urban public transportation. These facilities can be very complex and are used by a large amount of passengers. Therefore, it is important to maintain the safety for people and buildings. Especially in the case of fire or arson attack. This paper focusses on a fire scenario in a complex subway station for different weather conditions. The purpose is to identify the influences of different weather conditions on the smoke spread and the ability of self-rescue in case of a burning luggage. The evaluation of the fire simulations will focus on toxicity and visibility taking into account the FED concept. T2 - AUBE '17 & SUPDET 2017 CY - Washington D.C., USA DA - 12.09.2017 KW - Fire simulations KW - Weather conditions KW - FED PY - 2017 SN - 978-3-940402-11-0 VL - 2 SP - II-121 EP - II-128 AN - OPUS4-42253 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Knaust, Christian A1 - Rogge, Andreas T1 - CFD modeling of a tunnel fire by thermal coupling of fluid flow and structure T2 - International congress ' Fire computer modeling' CY - Cantabria, Spain DA - 2012-10-18 PY - 2012 SN - 978-84-86116-69-9 SP - 201 EP - 213 AN - OPUS4-27900 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hofmann-Böllinghaus, Anja A1 - Knaust, Christian A1 - Beard, A. T1 - Computermodellierung von Wohnungsbränden unter Berücksichtigung von Rauchmeldern und Flammschutzmitteln T2 - 8. SKZ-Fachtagung "Kunststoffe, Brandschutz und Flammschutzmittel" CY - Würzburg, Deutschland DA - 2006-06-21 KW - Wohnungsbrände KW - CFD Modellierung KW - Großversuch KW - Flammschutzmittel PY - 2006 N1 - Geburtsname von Hofmann-Böllinghaus, Anja: Hofmann, A. - Birth name of Hofmann-Böllinghaus, Anja: Hofmann, A. VL - 8 SP - 1 EP - 23(?) PB - SKZ CY - Würzburg AN - OPUS4-12906 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kusche, Christian A1 - Knaust, Christian A1 - Krause, U. T1 - Ermittlung von Verbrennungseffizienzen für Feststoffe N2 - Brandlasten stellen eine Gefahr für den Menschen sowie für das industrielle Gebäude dar, in dem sie gelagert sind. Das Brandverhalten der Brandlasten bestimmt dabei maßgeblich die Schwere der Gefahr. Brandschutzmaßnahmen dienen dazu, im Brandfall das Schadensausmaß zu minimieren. Um geeignete Brandschutzmaßnahmen ableiten zu können, ist es erforderlich, das Brandverhalten der Materialien zu bewerten. Eine international angewandte Möglichkeit zur Bewertung des Brandverhaltens von Feststoffen und Flüssigkeiten ist die Verbrennungseffizienz χ. Sie ist das Verhältnis der während einer Verbrennung effektiv freigesetzten Wärme (effektive Verbrennungswärme) zu der maximal möglichen Wärmemenge (Heizwert). Die Grundlage zur Bestimmung von Verbrennungseffizienzen stellen die Wärmefreisetzungsrate (HRR) und die Massenverlustrate (MLR) dar. Ein standardisiertes Bestimmungsverfahren existiert nicht. So liegt es in dem Ermessen des Anwenders, in welcher Prüfapparatur die Experimente durchgeführt werden und welcher Zeitbereich der HRR und der MLR zur Berechnung der Verbrennungseffizienz verwendet wird. Im Rahmen dieser Arbeit wurden Versuche im Cone Calorimeter und im Single Burning Item test anhand von hölzernen Materialien durchgeführt. Die Ergebnisse zeigen auf, dass sich in Abhängigkeit von der verwendeten Prüfapparatur und in Abhängigkeit des für die Berechnung betrachten Versuchszeitraumes verschiedene Werte der Verbrennungseffizienz ergeben. Auf Grundlage dieser Erkenntnisse wurde eine Methode entwickelt, mit der reproduzierbare Werte berechnet werden können. Dabei erfolgt die Berechnung lediglich für die Vollbrandphase. Diese Brandphase stellt die Hauptbrandphase dar und ist durch eine gleichmäßige Verbrennung mit wenigen Änderungen in der Branddynamik gekennzeichnet. T2 - 5. Magdeburger Brand- und Explosionsschutztage 2017 CY - Magdeburg, Germany DA - 23.03.2017 KW - Verbrennungseffizienzen KW - Rechenmodelle KW - Cone Calorimeter KW - Single Burning Item test KW - Brandverhalten KW - Modellierung von Bränden KW - Rauchausbreitung KW - Validierung KW - Brandlastberechnung PY - 2017 SN - 978-3-00-056201-3 U6 - https://doi.org/10.978.300/0562013 SP - 1 EP - 13 PB - Otto-von-Guericke-Universität Magdeburg CY - Magdeburg AN - OPUS4-40047 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kusche, Christian A1 - Knaust, Christian A1 - Krause, U. T1 - Experimentelle Untersuchungen zur Verbrennungseffektivität als Grundlage für Brandlastberechnungen der DIN 18230 N2 - Die Brandlastberechnung für Industriebauten erfolgt in Deutschland entsprechend der DIN 18230-1. Brandlasten bestehen in den meisten Fällen aus verschiedenen brennbaren Feststoffen und Flüssigkeiten, die in Abhängigkeit ihrer Lagerungsart, ihren stofflichen Eigenschaften und den Ventilationsbedingungen unterschiedliche Wärmeleistungen zur Folge haben. Als Eingangsgröße zur Brandlastberechnung berücksichtigt der sogenannte Abbrandfaktor m (m-Faktor) das individuelle Abbrandverhalten von Feststoffen und Flüssigkeiten. Sein Wert ergibt sich aus dem Vergleich der zeitlichen Temperaturentwicklung beim Abbrand einer Probe mit der Referenzprobe. Bei der Referenzprobe handelt es sich um sägerauhes Fichtenholz, dem ein m-Faktor von m = 1,0 zugeordnet wurde. Die Bestimmung des m-Faktors erfolgte bis vor einigen Jahren entsprechend der DIN 18230-2 in dem m-Faktor-Ofen. Bis zu der Verschrottung des letzten in Deutschland existierenden m-Faktor-Ofens wurden mehr als 100 m-Faktoren von verschiedenen Stoffen ermittelt. Zurzeit ist es nicht möglich zur Brandlastermittlung m-Faktoren experimentell zu bestimmen. Da infolge industrieller Entwicklungen zunehmend neue Stoffe auf den Markt kommen, deren Abbrandverhalten zu bestimmen. T2 - 3. Magdeburger Brand- und Explosionsschutztag / vfdb-Workshop CY - Magdeburg, Germany DA - 21.03.2013 KW - Verbrennungseffektivität KW - Brandlastberechnung KW - Abbrandfaktor m PY - 2013 SN - 978-3-00-041601-9 SP - 1 EP - 12 AN - OPUS4-30074 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hofmann-Böllinghaus, Anja A1 - Knaust, Christian A1 - Aschenbrenner, D. ED - Bradley, D. ED - Drysdale, D. ED - Molkov, V. ED - Carvel, R. T1 - Hazards of fires in children's rooms - experimental and numerical investigation of different scenarios T2 - 5th International seminar on fire and explosion hazards CY - Edinburgh, Scotland DA - 2007-04-23 PY - 2007 SN - 978-0-9557497-2-8 SP - 349 EP - 360 AN - OPUS4-28306 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Knaust, Christian A1 - Krause, Ulrich A1 - Hofmann-Böllinghaus, Anja A1 - Schneider, U. T1 - Modeling fire scenarios in buildings with CFD N2 - In the frame of the European harmonization, new European technical standards (Eurocodes) have been developed in recent years. Classical methods, like tables and simplified analytical procedures, as well as general engineering techniques are allowed by the Eurocodes for the fire protection design. The modeling and calculation of fire scenarios with CFD (Computational Fluid Dynamics) numerical methods is one of the general engineering methods. It is nowadays still difficult to check and evaluate the CFD results for their use as technical documents for fire safety design. Analytical engineering techniques, zone models and CFD-models have been used and compared in the present work for the prediction of the fire development in a building. To solve the conservation equation for the CFD-model, the CFD-program FDS, with the mixture fraction model, and the CFD-program FLUENT, with the one step reaction model as well as with the volumetric source term model, have been used. The combustion of polyurethane is modeled in FDS by specifying the heat release rate and the stoichiometry. For the combustion in volumetric source term model, the heat release rate and the smoke release were specified with respect to the stoichiometry. The input parameter for the one step reaction model is the pyrolysis mass flow. In the one step reaction model, the transport equations for polyurethane, H₂O, N₂, O₂, CO₂, CO and C (soot) are solved and the heat of combustion is determined from the standard formation enthalpy of all the components. In volumetric source term model, the transport equation is solved for air and smoke. FDS solves the transport equation for the mixture fraction. To model the fire development, and where no literature data was available, the required material characteristics like specific heat capacity, absorption coefficient and heat of combustion were measured. In all the investigated CFD-models the heat- and species transport equation has been solved and the absorption coefficient of soot has been considered. Furthermore, the fire development has also been investigated using zone models with the programs CFAST and MRFC. Results from analytical engineering techniques (plume calculations), which were design criteria in the past, have been used as plausibility checks for the present work. The calculation results from the investigations were compared to measurements in the same building performed by the National Institute for Standards and Technology (NIST). T2 - 11th International Symposium on Fire Protection CY - Leipzig, Germany DA - 08.06.2010 KW - CFD KW - Computational fluid dynamics KW - Zone model KW - Analytical technique KW - Combustion KW - Soot model KW - FLUENT KW - FDS KW - CFAST KW - MRFC KW - Measurements PY - 2010 SN - 978-3-00-03966-2 N1 - Geburtsname von Hofmann-Böllinghaus, Anja: Hofmann, A. - Birth name of Hofmann-Böllinghaus, Anja: Hofmann, A. SP - 1 EP - 14 PB - Vereinigung zur Förderung des Deutschen Brandschutzes (vfdb) CY - Münster AN - OPUS4-23159 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -