TY - JOUR A1 - Schmid, Thomas A1 - Jungnickel, R. A1 - Neuhaus, B. A1 - Riedel, Jens A1 - Kneipp, Janina A1 - Lüter, C. T1 - Raman spectroscopy as a tool for the collection management of microscope slides N2 - Throughout the history of preparation of biological samples for microscopy the choice of the mounting medium was sometimes dictated merely by availability of the used media. Thus, a plethora of resins and other organic polymers as well as complex mixtures are found to serve as mounting agents in microscope slide collections of museums of natural history, impeding the work for both curators and conservators. Dramatically, in some cases the used mounting media can already be observed to have undergone crystallization and other decomposition processes within few years of mounting demanding immediate action in restoring as well as an imminent precaution in conservation. Therefore, an unambiguous chemical identification of the used agent as well as its current aging stage is of great interest for the biologist community. The technical demands on the analytical approach to obtain this information can be straightforwardly identified. Any used technique has to be non-destructive, yield in molecular information allowing for a chemical identification of the used mounting agents and allow for a spatially well-defined interrogation in a thin sample slice, typically through a transparent cover slip. In this contribution we present a thorough study of the applicability of Raman spectroscopy for the described task. The obtained results clearly demonstrate the successful feasibility of the chosen method for a) a clear distinction between different media, b) the elucidation of the chemical composition of a multicomponent medium and c) an unambiguous identification of real unknown samples by a distinct assignment to a previously recorded spectral library. This library database was built up by recording pure mounting agents and will be provided to the general public. In combination with a Raman spectrometer, it can be an invaluable tool for future curation and conservation endeavors devoted to microscope slide collections at natural history museums. KW - Taxonomy KW - Mounting medium KW - Coverslip seal PY - 2016 U6 - https://doi.org/10.1016/j.jcz.2016.07.002 SN - 0044-5231 VL - 265 SP - 178 EP - 190 PB - Elsevier AN - OPUS4-38210 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eschlböck-Fuchs, S. A1 - Huber, N. A1 - Ahamer, C. M. A1 - Hechenberger, J. G. A1 - Kolmhofer, P. J. A1 - Heitz, J. A1 - Rössler, R. A1 - Demidov, Alexander A1 - Schmid, Thomas A1 - Gornushkin, Igor B. A1 - Panne, Ulrich A1 - Pedarnig, J. D. T1 - Application of laser-induced breakdown spectroscopy for the analysis of slags in industrial steel production N2 - Laser-induced breakdown spectroscopy (LIBS) is a fast and versatile technique for (semi) quantitative element analysis of solids, liquids, gases, and particulate matter. The LIBS method is used for optical sensing in various branches of industrial production. In the contribution we review some of our recent results on LIBS analysis of slags from secondary metallurgy in industrial steel making. Major oxides in steel slags are measured at-line and after homogenization using a calibration-free (CF) method. Two approaches for CF analysis based on the Boltzmann plot method and on the calculation of synthetic spectra are compared for the analysis of quaternary oxides. We also present the research in cooperation with our industrial partners in the process-analytical chemistry network PAC. T2 - 11. Kolloquium Arbeitskreis Prozessanalytik CY - Vienna, Austria DA - 30.11.2015 KW - Laser-induced breakdown spectroscopy (LIBS) KW - Process analytical technology KW - Steel slag PY - 2015 PB - Plandruck+ Gesellschaft m.b.H. CY - Wien AN - OPUS4-39005 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dariz, P. A1 - Jakob, C. A1 - Ectors, D. A1 - Neubauer, J. A1 - Schmid, Thomas T1 - Measuring the Burning Temperatures of Anhydrite Micrograins in a High-Fired Medieval Gypsum Mortar N2 - Typical feature of high-fired medieval gypsum mortars is a compact microstructure of squat gypsum crystals containing firing products as remains of the calcination process. So far, the burning history of the binder is estimated based on morphological characteristics of the latter. A novel Raman microspectroscopy approach provides access to the calcination temperatures of individual anhydrite grains based on quantifiable spectroscopic changes appearing due to gradual variations of crystallinity, as independently confirmed by X-ray diffraction analysis of anhydrites synthesised at temperatures between 500°C and 900°C. The approach was successfully applied to the high-fired gypsum mortar of a South Tyrolean stucco sculpture of a pieta dated around 1420. Microparticles of burned anhydrite II with firing temperatures scattered around 650°C and clusters of thermally damaged natural anhydrite II crystals from the raw material were identified and imaged. KW - Analytical methods KW - Gypsum technology KW - High-fired gypsum mortar KW - Raman microspectroscopy KW - Thermal anhydrite PY - 2017 U6 - https://doi.org/10.1002/slct.201701260 VL - 2 IS - 28 SP - 9153 EP - 9156 PB - Wiley VCH Verlag AN - OPUS4-42458 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -