TY - JOUR A1 - Özlü, C. A1 - Küttenbaum, Stefan A1 - Kainz, C. A1 - Braml, T. A1 - Taffe, A. T1 - Probabilistischer Nachweis einer Spannbetonbrücke – Teil 1 N2 - AbstractDer Erhalt der bestehenden Verkehrsinfrastruktur ist eine große Herausforderung, da die Bauwerke fortwährend altern, die Verkehrsbeanspruchung zunehmend steigt und deren umfassender Ersatz mit Blick auf begrenzte Budgets und Ressourcen nicht möglich ist. An Bestandsbauten können tatsächliche Materialkennwerte, Geometrien oder Einwirkungen objektspezifisch erfasst werden. Die Nachrechnung von Bestandsbrücken erfolgt in Deutschland gemäß Nachrechnungsrichtlinie nach Stufen 1 und 2 mit dem semiprobabilistischen Teilsicherheitskonzept. Nur im Ausnahmefall wird eine messbasierte Bewertung oder eine wissenschaftliche Betrachtung gemäß Stufen 3 und 4 durchgeführt. Die Einbeziehung zusätzlicher Informationen aus der Zustandserfassung bietet jedoch viele Vorteile für eine realitätsnahe Bewertung. In probabilistischen Berechnungsmethoden können solche Kenntnisse direkt in der Berechnung berücksichtigt werden. Ziel dieses zweiteiligen Beitrags ist die Vorstellung der Potenziale und Vorteile bei der direkten Berücksichtigung der Ergebnisse von zerstörungsfreien Prüfverfahren bei der Zustandsbewertung von Brückenbauwerken. Das Konzept wird an einer Spannbetonbrücke vorgestellt. Der erste Teil befasst sich mit den Möglichkeiten zur Überführung der Eingangswerte der üblichen semiprobabilistischen Berechnung in stochastische Modelle. Ausgehend von der semiprobabilistischen Nachrechnung nach derzeitigem Regelwerk wird die probabilistische Modellierung aller relevanten Basisvariablen für die Grenzzustände der Tragfähigkeit Biegung, Querkraft und Torsion ausgeführt. KW - Zuverlässigkeitsanalyse KW - Nachrechnung KW - Bestandsbauwerk PY - 2024 DO - https://doi.org/10.1002/best.202400018 VL - 119 IS - 7 SP - 509 EP - 523 PB - Wiley AN - OPUS4-60615 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Özlü, C. A1 - Küttenbaum, Stefan A1 - Kainz, C. A1 - Braml, T. A1 - Taffe, A. T1 - Probabilistischer Nachweis einer Spannbetonbrücke – Teil 2 N2 - AbstractIm zweiten Teil dieses Beitrags werden die Grenzzustandsfunktionen für die Nachweise im Grenzzustand der Tragfähigkeit für Biegung mit Normalkraft, Querkraft mit Querkraftbewehrung und Torsion vorgestellt. Die Eingangsgrößen der mechanischen Widerstandsmodelle werden durch zahlreiche Abbildungen illustriert. Auf Grundlage der probabilistischen Modelle aus dem ersten Teil dieses Aufsatzes und der mechanischen Modelle aus diesem zweiten Teil werden die probabilistischen Nachweise geführt. Die Ergebnisse aus der Zuverlässigkeitsanalyse werden mit den semiprobabilistischen Berechnungsergebnissen verglichen. Mittels Parameterstudien wird gezeigt, welche Eingangsgrößen im Standsicherheitsnachweis die größten Einflüsse auf die Bauwerkszuverlässigkeit haben. Die Messung dieser Parameter ist entsprechend besonders nützlich. Auf dieser Basis wird abschließend gezeigt, welche Chancen sich aus der Durchführung von zerstörungsfreien Bauwerksprüfungen für die Nachrechnung ergeben. KW - Zuverlässigkeitsanalyse KW - Nachrechnung KW - Bestandsbauwerk PY - 2024 DO - https://doi.org/10.1002/best.202400020 SN - 1437-1006 VL - 119 SP - 1 EP - 14 PB - Ernst & Sohn CY - Berlin AN - OPUS4-60616 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Küttenbaum, Stefan A1 - Braml, T. A1 - Heinze, M. A1 - Kainz, C. A1 - Keuser, M. A1 - Kotz, P. A1 - Lechner, T. A1 - Maack, Stefan A1 - Reinke, K.-D. A1 - Schulze, S. A1 - Soukup, A. A1 - Stettner, C. A1 - Taffe, A. A1 - Wöstmann, Jens T1 - Guideline on NDT-supported reliability assessment of existing structures - Current developments in Germany N2 - Information about an existing structure can be collected at certain costs to evaluate the reliability and condition as realistically as necessary. This information can be relevant or irrelevant, true or biased, precise or imprecise. The incorporation of relevant and quality-assessed measured information into reliability reassessment offers the chance to extend remaining lifetimes and support decision making about optimal actions or maintenance strategies. This paper shows recent developments in a national research project that aims to produce a guideline on the NDT-based, structure-specific modification of partial safety factors. The general methodology, results from recalculations according to the Eurocodes and metrologically solvable testing tasks relevant in the recalculation of the concrete bridges are shown and compared with the non-destructive testing methods applicable to concrete bridges. A case study is used to demonstrate that as-built drawings, in this case of the positions of tendons and shear reinforcement, can be verified using the radar method. KW - Non-destructive testing KW - Concrete bridges KW - Partial safety factor modification PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-584862 DO - https://doi.org/10.1002/cepa.2168 SN - 2509-7075 VL - 6 IS - 5 SP - 537 EP - 543 PB - Ernst & Sohn CY - Berlin AN - OPUS4-58486 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Küttenbaum, Stefan A1 - Kainz, C. A1 - Braml, T. ED - Matos, J.C. T1 - Non-destructively Measurable Quantities Relevant to Reliability Assessment of Existing Concrete Bridges – Case Studies N2 - In reliability assessment of existing bridges, collected information about the structure can be utilized to modify partial safety factors and to refine characteristic values individually. In this way, uncertainties covered in initial calculation models and arising from assumptions can be reduced as well as biases identified and corrected. This allows for more realistic assessments and more appropriate decisions on actions to be taken. However, the on-site observation of information is generally associated with certain costs. For this reason, an efficient data-supported reassessment requires that only the individually relevant testing tasks are solved. Additional sensitivity analyses can further be used to specify the requirements on certain inspections, such as the testing result quality to be achieved, in order to avoid too imprecise or too expensive measurements on-site. In this contribution, the methodology for the demand-actuated definition of measurement objectives is demonstrated using the example of non-destructive concrete testing methods and findings from reassessments of two prestressed concrete bridges. Each case study includes the semi-probabilistic identification of structural weak points in ultimate and serviceability limit states, a comparison with respective probabilistic sensitivity analyses, and the subsequent derivation of parameters that are a) measurable and b) highly relevant in the individual reliability analyses. KW - Reliability KW - Assessment KW - Existing structures KW - Non-destructive testing PY - 2024 SN - 978-3-031-60270-2 DO - https://doi.org/10.1007/978-3-031-60271-9_18 SP - 209 EP - 219 PB - Springer CY - Cham AN - OPUS4-60613 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Kainz, C. A1 - Braml, T. A1 - Keuser, M. A1 - Soukup, A. A1 - Küttenbaum, Stefan ED - Matos, J.C. T1 - Reassessment of Existing Concrete Bridges with Full Probabilistic Methods – Case Studies and Discussion of Relevant Input Parameters N2 - This article presents two case studies for a full-probabilistic assessment of existing concrete bridges combined with the use of the finite element method for the evaluation of the internal forces. Since the structures already exist, additional information about material parameters and loading conditions can be collected. With a sensitivity analysis, the contribution of each parameter to the total uncertainty is examined and the relevance of their actual value and variation is shown. The first case study is a single-span reinforced concrete frame bridge on the German highway A92 constructed in the year 1985. With a span of around 5 m, but a width of 27 m and a skewness of 70 gon, the bridge is modelled as a three-dimensional finite element model. The second case study is a two-span reinforced concrete frame bridge from 1986 with span lengths of about 7,50 m each. The superstructure is a 45 cm thick slab and the base plate has a thickness of 80 cm. The assessment is performed based on the semi-probabilistic safety concept according to the codes first and secondly with a full-probabilistic calculation. In this article the selection of parameters for the relevant input data are presented and discussed. The results of the sensitivity analysis are used for the setup of measurements to acquire important data for the modelling in the critical limit states. KW - Reliability KW - Assessment KW - Existing structures PY - 2024 DO - https://doi.org/10.1007/978-3-031-60271-9_41 SP - 440 EP - 451 PB - Springer CY - Cham AN - OPUS4-60614 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Küttenbaum, Stefan A1 - Kainz, C. A1 - Braml, T. T1 - Reliability assessment of existing concrete bridges with geometrical NDT results - Case studies N2 - The results of and the validity in reliability assessment of existing bridges essentially depend on the information available about the considered system. Information about the actual condition as well as structural and material characteristics can be observed on-site to refine the computation models used in assessment. Non-destructive testing (NDT) methods for concrete structures are capable of reconstructing missing, questioned, or inconsistent as-built plans. This contribution summarizes recent developments within the scope of the national pre-standardization project “ZfPStatik”, which aims to prepare a guideline about NDT-supported structural analyses. The focus is on the purposeful and explicit utilization of geometrical tendon and reinforcement bar positions (measured on-site using the ultrasound echo and ground penetrating radar (GPR) techniques) in probabilistic reliability analyses — shown by means of real case studies. The well-established first order reliability method is applied to different concrete bridges, which are typical for the German road bridge stock, to demonstrate the utility of incorporating quality-evaluated NDT-results in terms of changes in structural reliability. T2 - 13th German-Japanese Bridge Symposium CY - Osaka, Japan DA - 28.08.2023 KW - Non-destructive testing KW - Prestressed concrete KW - Data-informed reliability analysis PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-582727 SP - 29 EP - 40 PB - Osaka Metropolitan University CY - Osaka AN - OPUS4-58272 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -