TY - JOUR A1 - Weihnacht, V. A1 - Makowski, S. A1 - Brückner, A. A1 - Theiler, Geraldine A1 - Gradt, Thomas T1 - Tribologie und Anwendung trocken laufender ta-C-Schichten N2 - Superharte ta-C Kohlenstoffschichten sind durch niedrige Reibung und extreme Verschleißbeständigkeit für Anwendungen auf ungeschmierten Gleitpaarungen, z.B. trocken laufenden Getrieben prädestiniert. In tribologischen Untersuchungen im trockenen Gleitkontakt mit reversierender bzw. einsinniger Bewegungsrichtung wurden Reibungs- und Verschleißkoeffizienten in Abhängigkeit der Luftfeuchtigkeit und im Hochvakuum bestimmt. In den durchgeführten Oberflächenuntersuchungen von Schicht und Gegenkörper zeigten sich interessante Phänomene hinsichtlich Transfer- bzw. Triboreaktionsschichten. Obwohl die Ergebnisse eine Verschlechterung der ta-C-Eigenschafien mit abnehmender Luftfeuchtigkeit zeigen, sind die Reibungs- und Verschleißeigenschaften im Hochvakuum zum Teil erstaunlich positiv. KW - Tribologie KW - Verschleißschutzschichten KW - ta-C KW - DLC KW - Reibung KW - Verschleiß KW - Trockenreibung KW - Vakuumtribologie KW - Friction KW - Wear KW - Dry-running condition KW - Vacuum tribology PY - 2012 SN - 0724-3472 VL - 59 IS - 6 SP - 41 EP - 44 PB - Expert Verlag CY - Renningen AN - OPUS4-28004 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Epishin, A. A1 - Link, T. A1 - Klingelhöffer, Hellmuth A1 - Fedelich, Bernard A1 - Brückner, Udo A1 - Portella, Pedro Dolabella T1 - New technique for characterization of microstructural degradation under creep: Application to the nickel-base superalloy CMSX-4 N2 - A new experimental technique (repeated load annealing of flat wedge shaped specimens) was proposed for characterization of microstructural degradation under creep conditions. This technique was applied to investigate the microstructural degradation of the nickel-base superalloy CMSX-4 in a wide range of temperatures and stress levels. The results obtained allowed to describe analytically the kinetics of rafting, which is important to predict the reduction of fatigue lifetime and yield stress. KW - Microstructural degradation KW - Nickel-base superalloys KW - Rafting PY - 2009 DO - https://doi.org/10.1016/j.msea.2008.04.135 SN - 0921-5093 SN - 1873-4936 VL - 510-511 SP - 262 EP - 265 PB - Elsevier CY - Amsterdam AN - OPUS4-19354 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Epishin, A. A1 - Brückner, Udo A1 - Link, T. A1 - Fedelich, Bernard T1 - X-ray reflections from the Gamma/Gamma'-microstructure of nickel-base superalloys: effect of the plane tilting N2 - The shape of X-ray reflections from the cuboidal γ/γ'-microstructure was investigated. The measurements were performed on the 4th generation single-crystal nickel-base superalloy TMS138. It is shown that reflections from non-cubic crystallographic planes split not only in d-scale due to the different spacing of the γ- and γ'-lattices but also in the pole figure due to the tilting of γ-lattice planes. This tilting results from the elastic distortion of the γ-lattice caused by the γ/γ'-misfit. The results obtained are discussed under the methodical aspect of misfit measurement. KW - Nickel-base alloys KW - X-ray diffraction KW - Lattice distortion PY - 2010 DO - https://doi.org/10.3139/146.110315 SN - 1862-5282 VL - 101 IS - 5 SP - 589 EP - 593 PB - Carl Hanser CY - München AN - OPUS4-21512 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weihnacht, V. A1 - Brückner, A. A1 - Theiler, Geraldine A1 - Gradt, Thomas T1 - MoS2/ta-C-Kombinationsschichten hergestellt durch Laser-Arc-Technologie - Hochwertige Gleitschichten für extreme Umgebungen T1 - MoS2/ta-C coatings produced by laser-arc-technology N2 - Mittels lasergesteuerter gepulster Vakuumbogentechnologie (Laser-Arc) wurde eine reihe von reinen MoS2-Schichten sowie Kombinationsschichten aus MoS2 und tetraedrischem amorphen Kohlenstoff (ta-C) hergestellt. Mit diesen Schichtvarianten erfolgten tribologische Tests im Vakuum sowie in Atmosphäre. Dabei wurden im Hochvakuum reibungskoeffizienten bis zu 0,005 gemessen. Durch die Verwendung einer ta-C unterschicht konnte eine Lebensdauer von über 5×105 Lastzyklen erreicht werden. Zudem erwies sich diese unterschicht als vorteilhaft für das tribologische Verhalten der MoS2/ta-C Schichten unter atmosphärischen Bedingungen. N2 - A series of MoS2 and combined MoS2/ta-C coatings were prepared by lasercontrolled arc evaporation (Laser-Arc) in order to study the tribological coating behaviour under vacuum and atmospheric conditions. Very low friction coefficients down to 0.005 were measured under high vacuum. By using a ta-C underlayer beneath the MoS2 a increased lifetime up to 5×105 load cycles could be obtained. Also under atmospheric conditions the underlayer had a beneficial effect on coating performance. KW - MoS2 KW - ta-C Schichten KW - Reibung KW - Verschleiß KW - Vakuum Umgebungen PY - 2012 DO - https://doi.org/10.1002/vipr.201200500 SN - 0947-076X SN - 1522-2454 VL - 24 IS - 5 SP - 17 EP - 23 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-27207 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Theiler, Geraldine A1 - Gradt, Thomas A1 - Österle, Werner A1 - Brückner, A. A1 - Weihnacht, V. T1 - Friction and endurance of MoS2/ta-C coatings produced by laser arc deposition N2 - The tribological behaviour of MoS2/ta-C double layer coatings deposited by Laser-Arc technology was investigated in vacuum and air. In vacuum environment, the friction coefficient against steel balls varies between 0.005 and 0.02 depending on the contact pressure. At high contact pressures, the friction coefficient is as low as 0.005 and the life time between 340,000 and 500,000 cycles. Furthermore, it is shown that a ta-C base layer improves the performance of MoS2 coating. Surface analyses were performed before and after the tribological tests by means of SEM, EDX, XRD, and TEM. They show that in the top layer beneath the sliding surface crystallization of the initially quasi-amorphous MoS2 took place. TEM images also verified an orientation of the basal MoS2-lattice planes parallel to the surface. KW - MoS2 coatings KW - Ta-C KW - Vacuum KW - Laser arc deposition PY - 2013 DO - https://doi.org/10.1016/j.wear.2012.10.007 SN - 0043-1648 VL - 297 IS - 1-2 SP - 791 EP - 801 PB - Elsevier CY - Amsterdam AN - OPUS4-27114 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -