TY - JOUR A1 - Brandt, S. A1 - Müller, Birgit A1 - Müller, D. A1 - Horn, Wolfgang A1 - Panasková, J. A1 - Plehn, W. T1 - Messung und Bewertung von Gerüchen aus Bauprodukten für den Innenraum T1 - Measurement and evaluation of odour emissions from building products for indoor usage N2 - Messung und Bewertung von Gerüchen aus Bauprodukten für den Innenraum gewinnen vor allem durch den zunehmenden Bau energieeffizienter Gebäude an Bedeutung. Intensive und unangenehme Gerüche werden von Bewohnerinnen, Bewohnern und Angestellten nicht akzeptiert und können auf Dauer krank machen. Bislang stand noch kein allgemein anerkanntes Messverfahren zur Verfügung. Dieses wurde nun in Forschungsprojekten entwickelt, wobei auch konkrete Bewertungsvorschläge zur Zumutbarkeit von Gerüchen gemacht wurden. Das Verfahren ist an die Messung der Emissionen flüchtiger organischer Verbindungen aus Bauprodukten gekoppelt und nutzt Probanden, um die Geruchsstärke (Intensität) und den Geruchseindruck (Hedonik) zu ermitteln. In der Praxis wird das Verfahren nun an verschiedenen Stellen erprobt. Die Bewertung der Geruchsemissionen gibt der Industrie die Möglichkeit, geruchsarme Produkte zu gestalten. Die Kennzeichnung geruchsarmer Bauprodukte mit dem Umweltzeichen Blauer Engel erleichtert Verbraucherinnen und Verbrauchern die Orientierung beim Einkauf. N2 - Measuring and evaluating odour emissions from building products used in indoor spaces are becoming increasingly important for the construction of energy-efficient buildings. Intensive and unpleasant smells are not accepted by inhabitants and employees and may lead to negative health effects. Up to now a consistent measuring method for odour emissions has not been available. A measuring method and also concrete standards for the assessment of odours by using reasonableness of smells have now been developed in succeeding research projects. The procedure uses a panel of test persons to determine the strength (intensity) and impression (hedonic appraisal) of odour and is linked to the already well established measurement of the emission of volatile organic compounds from building products. At the Moment the new procedure is tested in practice at different laboratories. Evaluating odour emissions helps manufacturers to develop products with low or very low odour emissions. The labeling of low-odour Building products with the environmental label Blue Angel gives consumers an orientation for purchase. KW - Labelsysteme KW - VOC KW - Geruch KW - Geruchstest KW - Emissionsmessungen PY - 2011 SN - 2190-1120 SN - 2190-1147 VL - 4 SP - 50 EP - 58 PB - BfS CY - Berlin AN - OPUS4-25210 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Birgit A1 - Danielak, M. A1 - Horn, Wolfgang A1 - Jann, Oliver A1 - Müller, D. A1 - Panaskova, J. A1 - Plehn, W. T1 - Sensorische Bewertung der Emissionen aus Bauprodukten N2 - Die Bewertung von VOC-Emissionen aus Bauprodukten soll durch das AgBB-Schema vereinheitlicht werden und eine gesundheitsrelevante Komponente enthalten. Das Deutsche Institut für Bautechnik (DIBt) hat das AgBB-Schema in weiten Teilen für seine „Grundsätze zur gesundheitlichen Bewertung von Bauprodukten in Innenräumen“ implementiert. Neben der üblichen chemischen Emissionsmessung soll auch der Geruch für die Bewertung des Produkts herangezogen werden. Um den Geruch als festen Bestandteil in die Produktprüfung zu integrieren, wurden vom Umweltbundesamt zwei Vorhaben initiiert. Erste Ergebnisse des zweiten Vorhabens (FKZ 37 07 62 300; Sensorische Bewertung der Emissionen aus Bauprodukten – Integration in die Vergabegrundlagen für den Blauen Engel und das Bewertungsschema des Ausschusses zur gesundheitlichen Bewertung von Bauprodukten) werden hier dargestellt. KW - AgBB-Schema KW - VOC KW - Emissionen KW - Geruch KW - Bauprodukte KW - Bewertung Emissionen PY - 2009 SN - 0949-8036 SN - 0039-0771 SN - 1436-4891 VL - 69 IS - 6 SP - 246 EP - 250 PB - Springer-VDI-Verl. CY - Düsseldorf AN - OPUS4-19658 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Urs A1 - Fontana, Patrick A1 - Meng, Birgit T1 - BAM-Division VII.1 Building Materials: Main Expertise/NANOCEM Partner Project T2 - Nanocem Open meeting CY - Morges, Switzerland DA - 2005-04-29 PY - 2005 AN - OPUS4-7420 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Urs A1 - Pliett, H. A1 - Wenzel, F. A1 - Meng, Birgit T1 - A sustainable approach for the conservation of the Timur Shah Mausoleum in Kabul, Afghanistan T2 - 10th International Conference on Durability of Building Materials and Components (DBMC) CY - Lyon, France DA - 2005-04-17 PY - 2005 SP - 1 EP - 8(?) CY - Lyon AN - OPUS4-7411 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Urs A1 - Meng, Birgit A1 - Österle, Werner A1 - Gardei, André ED - Stark, J. T1 - Characterization of granulated blast furnace slag by means of the combined application of the FIB/TEM technique T2 - 16. Ibausil - Internationale Baustofftagung CY - Weimar, Germany DA - 2006-09-20 PY - 2006 SN - 3-00-018263-2 VL - 1 SP - 1-0189 - 1-0195 PB - Bauhaus-Univ. CY - Weimar AN - OPUS4-13717 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Meng, Birgit A1 - Müller, Urs A1 - Garcia, O. A1 - Malaga, Katarina T1 - Performance of a new anti-graffiti agent used for immovable cultural heritage objects N2 - Cultural Heritage objects are in many cases invaluable and irrecoverable, therefore their protection is a prior goal. One threat arises by intentionally defacing such objects with graffiti. One possibility to face the imminent threat is the application of a surface protection in form of anti-graffiti systems (AGS). However, the knowledge about the performance and durability of AGS on substrates used for historical buildings is still fragmented. The goal of the presented study was to investigate the performance of a newly developed agent in comparison to a selection of commercial anti-graffiti agents on different substrates, which were used for historical buildings. Four commercial anti-graffiti agents with different chemical formulations were selected and tested with the new agent on different stone and brick substrates. The results showed clearly that AGS based on dense, water vapour impermeable coatings are not suitable to porous substrates such as sandstone, brick or porous limestone due to their impair of the hygric properties and the visual appearance of a substrate. The new agent could not completely reach the cleaning efficacy of the dense coatings but exhibited a much lower impact on the properties of the substrate and was therefore better compatible to historical surfaces. KW - Graffiti KW - Cultural Heritage KW - Anti-graffiti agent KW - Performance KW - Stone KW - Brick KW - Cleaning efficacy KW - Compatibility PY - 2014 DO - https://doi.org/10.1080/15583058.2012.747116 SN - 1558-3058 SN - 1558-3066 VL - 8 IS - 6 SP - 820 EP - 834 PB - Taylor & Francis CY - Philadelphia, Pa., USA AN - OPUS4-28605 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Fontana, Patrick A1 - Müller, Urs A1 - Meng, Birgit ED - Rogge, A. ED - Meng, B. T1 - Schädigungsmechanismen in Beton T2 - 52. DAfStb-Forschungskolloquium CY - Berlin, Deutschland DA - 2011-11-07 KW - Frost-Tausalz-Beanspruchung KW - Schrumpfrisse KW - Autogenes Schwinden KW - Plastisches Schwinden KW - Brand KW - Sulfatangriff KW - AKR PY - 2011 SN - 978-3-9814281-0-0 IS - D1 SP - 105 EP - 110 PB - BAM Bundesanstalt für Materialforschung und -prüfung CY - Berlin AN - OPUS4-25141 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lehmann, Christian A1 - Fontana, Patrick A1 - Müller, Urs A1 - Meng, Birgit ED - Rogge, A. ED - Meng, B. T1 - Entwicklung von C-S-H-Phasen in autoklaviertem Ultra-Hochleistungs-Beton (UHPC) T2 - 52. DAfStb-Forschungskolloquium CY - Berlin, Deutschland DA - 2011-11-07 PY - 2011 SN - 978-3-9814281-0-0 SP - 25 EP - 32 PB - BAM Bundesanstalt für Materialforschung und -prüfung CY - Berlin AN - OPUS4-25196 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meng, Birgit A1 - Müller, Urs A1 - Fontana, Patrick ED - Rogge, A. ED - Meng, B. T1 - Neue Erkenntnisse und Analysemethoden zum Phasenbestand und Gefüge des Zementsteins T2 - 52. DAfStb-Forschungskolloquium CY - Berlin, Deutschland DA - 2011-11-07 KW - Baustoffe KW - Zement KW - Mörtel KW - Mineralogische Zusammensetzung PY - 2011 SN - 978-3-9814281-0-0 SP - 11 EP - 17 PB - BAM Bundesanstalt für Materialforschung und -prüfung CY - Berlin AN - OPUS4-25198 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Urs A1 - Meng, Birgit A1 - Bürgisser, Philip ED - Rogge, A. ED - Meng, B. T1 - Das natürliche Puzzolan 'Rheinischer Trass' und dessen Einfluss auf eine Alkali-Kieselsäure-Reaktion (AKR) in Beton T2 - 52. DAfStb-Forschungskolloquium CY - Berlin, Deutschland DA - 2011-11-07 PY - 2011 SN - 978-3-9814281-0-0 SP - 141 EP - 150 PB - BAM Bundesanstalt für Materialforschung und -prüfung CY - Berlin AN - OPUS4-25187 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Fontana, Patrick A1 - Lehmann, Christian A1 - Müller, Urs A1 - Meng, Birgit A1 - Kühne, Hans-Carsten A1 - Rogge, Andreas T1 - Wärmebehandlung und Autoklavierung von UHPC - Einfluss auf Mikrostruktur und mechanische Eigenschaften T2 - Feuerfestkolloquium 2011, Fachsymposium "Fertigteile aus UHPC - Fertigungspartner Feuerfestindustrie?" CY - Aachen, Germany DA - 2011-10-20 PY - 2011 AN - OPUS4-24745 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Fontana, Patrick A1 - Lehmann, Christian A1 - Müller, Urs A1 - Kühne, Hans-Carsten A1 - Meng, Birgit A1 - Rogge, Andreas T1 - Wärmebehandlung und Autoklavierung von UHPC - Neue Perspektiven für die Betonfertigteilindustrie T1 - Heat curing and autoclaving of UHPC - New perspectives for the precast concrete industry N2 - Das Gefüge von UHPC ist durch eine dicht gepackte und fehlstellenarme Matrix gekennzeichnet. Eine zusätzliche Optimierung ist durch eine Wärmebehandlung bzw. hydrothermale Nachbehandlung (Autoklavierung) unter einem Wasserdampfsättigungsdruck möglich. Die Wärmebehandlung von Beton ist ein in der Betonfertigteilindustrie geläufiges Verfahren, um die Erstarrungszeit zu verkürzen und höhere Frühfestigkeiten zu erreichen. N2 - The structure of UHPC is characterized by a densely packed matrix with only a small number of voids; it can be enhanced further by heat curing or hydrothermal Treatment (autoclaving) subject to water vapor pressure. Heat curing of concrete is commonly applied in the precast industry in Order to shorten its setting time and achieve higher early strengths. KW - Ultrahochleistungsbeton KW - Stahlfasern KW - Nachbehandlung KW - Mikrostruktur KW - Festigkeit PY - 2011 SN - 0373-4331 SN - 1865-6528 N1 - Sprachen: Deutsch/Englisch - Languages: German/English VL - 77 IS - 10 SP - 46 EP - 47 PB - Bauverl. CY - Gütersloh AN - OPUS4-24838 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bahlmann, Stefanie A1 - Rübner, Katrin A1 - Meng, Birgit A1 - Hauer, B. A1 - Klein, H. A1 - Müller, C. A1 - Ruppert, J. A1 - Schäfer, S. A1 - Spanka, G. A1 - Wassing, W. A1 - Zunzer, U. T1 - Potenziale des Sekundärstoffeinsatzes im Betonbau - Teilprojekt B1 KW - Nachhaltigkeit KW - Sekundäre Gesteinskörnung KW - Rezyklierte Gesteinskörnung KW - Betonbrechsand KW - Müllverbrennungsasche PY - 2007 SN - 978-3-410-65772-9 SN - 0171-7197 N1 - Geburtsname von Bahlmann, Stefanie: Ramolla, S. - Birth name of Bahlmann, Stefanie: Ramolla, S. IS - 572 SP - 131 EP - 222 PB - Beuth AN - OPUS4-16361 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Meng, Birgit A1 - Fontana, Patrick A1 - Müller, Urs T1 - Nanotechnologie im Beton - Entwicklungsstand und Innovationschancen KW - Nanotechnologie KW - Analytik KW - Gefüge KW - Zement KW - Beton PY - 2008 SN - 978-3-7625-3624-6 VL - 56 SP - 186 EP - 190 PB - Bauverlag BV CY - Gütersloh AN - OPUS4-16316 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Urs A1 - Meng, Birgit A1 - Kühne, Hans-Carsten A1 - Nemecek, J. A1 - Fontana, Patrick ED - E. Fehling, ED - Schmidt, M. ED - S. Stürwald, T1 - Micro texture and mechanical properties of heat treated and autoclaved Ultra High Performance Concrete (UHPC) KW - Ultra high performance concrete KW - Micro texture KW - Mechanical strength KW - Secondary cemetitious materials PY - 2008 SN - 978-3-89958-376-2 IS - 10 SP - 213 EP - 220 CY - Kassel AN - OPUS4-16726 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Urs A1 - Meng, Birgit A1 - Fontana, Patrick T1 - Nano-Gefügeanalytik - Die Optimierung von Baustoffen KW - Nanotechnologie KW - Baustoffe PY - 2008 SN - 1618-7881 VL - 1 IS - 1 SP - 18 EP - 21 PB - GIT Verl. CY - Darmstadt AN - OPUS4-17438 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Brockmann, T. A1 - Fontana, Patrick A1 - Meng, Birgit A1 - Müller, Urs T1 - Nanotechnologie im Bauwesen N2 - Zu den Zielen der Nanotechnologie gehört die Entwicklung, Produktion und Anwendung von Materialien und Werkstoffen mit völlig neuartigen Leistungsspektren. Für die Baupraxis und die Materialforschung lassen sich über den Einsatz der Nanotechnologie Ziele wie die Optimierung von Baustoffeigenschaften, Vermeidung von Schäden und neue Funktionalitäten definieren. Der vorliegende Beitrag gibt einen Überblick über mögliche Anwendungsbereiche der Nanotechnologie im Bausektor, wie z. B. zementgebundene Baustoffe, Außen- und Dachfassaden, Fenster und Verglasungen, Brandschutz, Inneneinrichtung und Infrastrukturbau. Zudem werden aktuelle Forschungsarbeiten mit nanowissenschaftlichem und nanotechnologischem Schwerpunkt im Bereich baustoffbezogener Materialien der Bundesanstalt für Materialforschung und -prüfung (BAM) in Berlin vorgestellt. Die Forschungstätigkeiten beziehen sich zum einen auf die Modifikation der Hydratphasen in Ultra-Hochleistungsbeton (UHPC) und zum anderen auf die Weiterentwicklung von Anti-Graffiti-Systemen. KW - Nanotechnologie KW - Forschung und Entwicklung KW - UHPC KW - Anti-Graffiti PY - 2008 DO - https://doi.org/10.1002/best.200800624 SN - 0005-9900 SN - 1437-1006 VL - 103 IS - 7 SP - 446 EP - 454 PB - Ernst CY - Berlin AN - OPUS4-17731 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meng, Birgit A1 - Fontana, Patrick A1 - Müller, Urs A1 - Kühne, Hans-Carsten T1 - Nanotechnologische Anwendungen im Baustoffbereich T2 - Nanotechnologie und Bauwesen (NanoTecture) CY - Düsseldorf DA - 2006-12-05 KW - Nanotechnologie KW - Analytik KW - Gefüge KW - Zement KW - Beton PY - 2006 SP - 13 EP - 27 CY - Düsseldorf AN - OPUS4-15703 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weise, Frank A1 - Pirskawetz, Stephan A1 - Müller, Urs A1 - Meng, Birgit T1 - Charakterisierung der Schädigungsprozesse in Betonen mit innovativen Prüftechniken KW - Beton KW - Naturstein KW - Schadensanalyse KW - Innovative Prüftechnik PY - 2007 IS - 13 SP - 14 EP - 20 AN - OPUS4-15715 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weise, Frank A1 - Pirskawetz, Stephan A1 - Müller, Urs A1 - Meng, Birgit T1 - Charakterisierung der Schädigungsprozesse in Betonen mit innovativen Prüftechniken KW - Beton KW - Schädigungsprozesse KW - Zerstörungsarme und zerstörungsfreie Prüfverfahren PY - 2006 SN - 0005-9846 VL - 56 IS - 6 SP - 268 EP - 275 PB - Verlag Bau + Technik CY - Erkrath AN - OPUS4-14403 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Rübner, Katrin A1 - Meng, Birgit A1 - Müller, Urs ED - Maierhofer, C. ED - Reinhardt, H.-W. ED - Dobmann, G. T1 - Investigating the original water content of concrete N2 - This chapter provides an overview of methods that are commonly used for the analysis of the original water content of fresh and hardened concrete. The methods consist of direct methods, which detect the water content or the water/cement ratio primarily, as well as indirect methods, which measure other material characteristics related to the water content. KW - Concrete analysis KW - Water content KW - Water/cement ratio KW - Pore structure analysis PY - 2010 SN - 978-1-84569-560-6 VL - 1 IS - Chapter 11 SP - 217 EP - 241 PB - Woodhead Publishing Ltd CY - Oxford AN - OPUS4-21814 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Urs A1 - Lehmann, Christian A1 - Fontana, Patrick A1 - Meng, Birgit T1 - Effects of autoclaving on the nano structure and phase composition of ultra high performance concrete T2 - 12th Euroseminar on microscopy applied to building materials CY - Dortmund, Germany DA - 2009-09-15 KW - UHPC KW - Micro structure KW - Autoclaving KW - Phase stability KW - C-S-H PY - 2009 SN - 978-3-00-028697-1 SP - 351 EP - 359 AN - OPUS4-20622 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Meng, Birgit A1 - Müller, Urs A1 - Rübner, Katrin ED - Maierhofer, C. ED - Reinhardt, H.-W. ED - Dobmann, G. T1 - Components in concrete and their impact on quality: an overview KW - Concrete KW - Cement KW - Aggregate KW - Microstructure KW - Durability PY - 2010 SN - 978-1-84569-560-6 VL - 1 IS - Chapter 5 SP - 82 EP - 93 PB - Woodhead Publishing Ltd CY - Oxford AN - OPUS4-21049 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Müller, Urs A1 - Meng, Birgit A1 - Rübner, Katrin ED - Maierhofer, C. ED - Reinhardt, H.-W. ED - Dobmann, G. T1 - Analysis of solid components and their ratios in reinforced concrete structures KW - Concrete analysis KW - Concrete petrography KW - Optical microscopy KW - Scanning electron microscopy KW - Micro X-ray fluorescence analysis PY - 2010 SN - 978-1-84569-560-6 VL - 1 IS - Chapter 9 SP - 180 EP - 197 PB - Woodhead Publishing Ltd CY - Oxford AN - OPUS4-21050 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Urs A1 - Bürgisser, Philip A1 - Weise, Frank A1 - Meng, Birgit ED - Castro-Borges, P. ED - Moreno, E.I. ED - Sakai, K. ED - Gjorv, O.E. ED - Banthia, N. T1 - The natural pozzolana 'Rhenish trass' and its effect on ASR in concrete T2 - CONSEC’10 - 6th International conference on concrete under severe conditions - Environment and loading CY - Mérida, Yucatán, México DA - 2010-06-07 KW - AKR KW - Beton KW - Natürliche Pozzolane PY - 2010 SN - 978-0-415-59316-8 SP - 313 EP - 320 PB - Taylor & Francis AN - OPUS4-21969 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Fontana, Patrick A1 - Lehmann, Christian A1 - Müller, Urs A1 - Meng, Birgit ED - Brameshuber, W. T1 - Reactivity of mineral additions in autoclaved UHPC T2 - International Conference on Material Science and 64th RILEM Annual week CY - Aachen, Germany DA - 2010-09-06 KW - UHPC KW - Autoklavierung KW - Mikrostruktur KW - Festigkeit KW - Phasenzusammensetzung KW - Forschung und Entwicklung PY - 2010 SN - 978-2-35158-110-0 VL - III IS - PRO 77 SP - 69 EP - 77 PB - RILEM Publications AN - OPUS4-21970 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Jakubcová, Petra A1 - Schnell, A. A1 - Rübner, Katrin A1 - Müller, A. A1 - Meng, Birgit T1 - Nutzung von Bau- und Abbruchabfällen zur Herstellung von Recyclinggranulaten T2 - Tagung Bauchemie der GDCh-Fachgruppe Bauchemie 2010 CY - Dortmund, Deutschland DA - 2010-10-07 KW - Sekundärrohstoffe KW - Sekundäre Gesteinskörnung KW - Recycling PY - 2010 SN - 978-3-936028-65-2 VL - 42 SP - 129 EP - 136 AN - OPUS4-22444 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Fontana, Patrick A1 - Müller, Urs A1 - Malaga, Katarina A1 - Lagerblad, B. A1 - Meng, Birgit T1 - Precast concrete facade elements with low embodied energy N2 - Concrete is by far the most common building material in the world. Due to its good durability it is widely used in building envelopes. One major part of the embodied energy in concrete comes from the production of Portland cement that consumes around 3,500 MJ energy per each ton of cement. Globally 2.6 billion tons of Portland cement is produced and the consumption is increasing. Since concrete will be used as main building material also in future construction, it is reasonable to develop concrete building components with lower embodied energy.Using the example of an ultra-high performance concrete (UHPC) façade element, it is demonstrated how the embodied energy can be reduced by application of hydrothermal curing. T2 - ENBRI Workshop - reaching the nearly zero-energy goal for buildings CY - Boras, Sweden DA - 04.04.2011 KW - UHPC KW - Betonfertigteil KW - Fassaden KW - Autoklavierung KW - Nachhaltigkeit PY - 2011 SN - 978-91-86622-51-0 SN - 0284-5172 SP - 1 EP - 8 AN - OPUS4-23628 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Urs A1 - Gardei, André A1 - Massah, Sima A1 - Meng, Birgit T1 - Hydraulische Bindemittel KW - Bindemittel KW - Puzzolane KW - Hydraulisch KW - Beton KW - Denkmalpflege PY - 2008 SN - 978-3-86568-451-6 N1 - Serientitel: Berichte zu Forschung und Praxis der Denkmalpflege in Deutschland – Series title: Berichte zu Forschung und Praxis der Denkmalpflege in Deutschland IS - 16 SP - 9 EP - 21 PB - Michael Imhof AN - OPUS4-19087 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bürgisser, Philip A1 - Müller, Urs A1 - Meng, Birgit A1 - Abart, R. ED - Leon Black, ED - Phil Purnell, T1 - Influence of natural pozzolans of mechansims of the alkali silica reaction (ASR) in concrete T2 - 29th Cement and concrete science conference CY - Leeds, UK DA - 2009-09-07 KW - AKR KW - Natürliche puzzolanische Zusatzstoffe KW - C-S-H Phasen PY - 2009 SN - 978-0-85316-281-0 SP - 143 EP - 146 AN - OPUS4-20249 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bürgisser, Philip A1 - Müller, Urs A1 - Meng, Birgit A1 - Abart, R. ED - Stark, J. T1 - Der Einfluss von natürlichen Puzzolanen vulkanischen Ursprungs auf die Alkali-Kieselsäurereaktion (AKR) im Beton T2 - 17. Ibausil - Internationale Baustofftagung CY - Weimar, Germany DA - 2009-09-23 KW - AKR KW - Natürliche puzzolanische Zusatzstoffe KW - C-S-H Phasen PY - 2009 SN - 978-3-00-027265-3 VL - 2 SP - 2-0687 - 2-0692 CY - Weimar AN - OPUS4-20298 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kargol, Marta A1 - Müller, Urs A1 - Gardei, André A1 - Meng, Birgit T1 - Influence of blended cements on the performance of water repellent agents N2 - Ingress of moisture and harmful ions (e.g. Chloride, sulfate) into cementitious materials is one of the major factors in defining their durability. Modifications of building materials by targeted deposition of surface functional agents that make the surface hydro- and/or oleophobic aim to minimize moisture and ion ingress, and thus extend Service life of the cement based structures. Water repellent and easy-to-clean coatings for inorganic Substrates have gained strong attention during the last few years and various formulations based on silicones or alkylpolysiloxanes have been developed. Cementitious building materials are highly complex Systems with many components and changing properties in the course of a building’s Service life. The interactions between the Chemical agents and the cement based materials depend on many factors. The Chemical properties of the material Substrate appear to be the most important but in the context of their influence on the functionality of silanes and/or siloxanes these characteristics have not been well understood yet. The aim of this study was to evaluate the effect of different blended cements on water repellent agents’ performance. Two organosilicon compounds were applied on fresh blended cements containing limestone (L), fly ash (F), slag (S) and trass (T), and investigated in terms of their functionality. The surface properties of functionalized blended cements were studied based on wettability, i.e. contact angle measurements, before and after exposure to artificial and natural weathering. The first results indicate that slag and trass more distinctly affect the water repellent Surface performance after aging. T2 - Hydrophobe VI - 6th International conference on water repellent treatment of building materials CY - Rome, Italy DA - 12.05.2011 KW - Hydrophobic surfaces KW - Wettability KW - Impregnation KW - Blended cement KW - Silanes PY - 2011 SN - 978-3-931681-99-9 SP - 23 EP - 32 PB - Aedificatio Publishers AN - OPUS4-23681 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wiedmann, A. A1 - Weise, Frank A1 - Kotan, E. A1 - Müller, H. S. A1 - Meng, Birgit T1 - Effects of fatigue loading and alkali-silica reaction on the mechanical behaviour of pavement concrete N2 - The primary aim of this paper is to analyze the impact of mechanical pre-damage and alkali–silica reaction (ASR) on the fracture mechanical properties of pavement concrete. For this purpose, a four point bending test was applied to large format beams to produce a defined level of cyclic pre-damage. The fatigue-induced concrete degradation process was simultaneously recorded using a testing procedure specifically developed for the purpose. In addition, fatigue-induced cracks on extracted drilling cores were spatially visualized and quantified using micro X-ray 3D-computed tomography (3D-CT). The storage of the small-format test specimens, with and without cyclic pre-damage, in an ASR-conducive environment showed that pre-damage leads to an increase in ASR damage processes. Subsequent structural mechanical investigations on small format specimens with and without pre-damage show that fatigue loading and ASR significantly influence fracture mechanical parameters of the concrete. KW - Acoustic emissions analysis KW - Alkali-silica reaction KW - Concrete pavement KW - Fatigue loading KW - Fracture energy KW - Monitoring of damage KW - Tensile strength KW - Ultrasonic velocity PY - 2017 DO - https://doi.org/10.1002/suco.201600179 SN - 1751-7648 SN - 1464-4177 VL - 18 IS - 4 SP - 539 EP - 549 PB - Ernst & Sohn AN - OPUS4-41007 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Karsten A1 - Rehmer, Birgit T1 - Dynamic Fracture Toughness of Ductile Cast Iron for Transport and Storage Casks T2 - Jahrestagung Kerntechnik 2000 ; Annual Meeting on Nuclear Technology 2000 CY - Bonn, Germany DA - 2000-05-23 KW - DCI KW - Ductile Cast Iron KW - Transport and Storage Casks PY - 2000 SP - 609 EP - 612 PB - INFORUM-Verl. CY - Bonn AN - OPUS4-893 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Birgit A1 - Dahms, A. A1 - Müller, D. A1 - Knudsen, H. A1 - Afshari, A. A1 - Wargocki, P. A1 - Olesen, B. A1 - Berglund, B. A1 - Ramalho, O. A1 - Goschnick, J. A1 - Jann, Oliver A1 - Horn, Wolfgang A1 - Nesa, D. A1 - Chanie, E. A1 - Ruponen, M. T1 - Emissionen flüchtiger organischer Verbindungen aus Bauprodukten T2 - CLIMA 2007 Well Beeings Indoors CY - Helsinki, Finland DA - 2007-06-10 PY - 2007 AN - OPUS4-15030 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Birgit A1 - Dahms, A. A1 - Müller, D. A1 - Knudsen, H. A1 - Afshari, A. A1 - Wargocki, P. A1 - Olesen, B. A1 - Berglund, B. A1 - Ramalho, O. A1 - Goschnick, J. A1 - Jann, Oliver A1 - Horn, Wolfgang A1 - Nesa, D. A1 - Chanie, E. A1 - Ruponen, M. T1 - A European project SysPAQ - EU FP6 NEST initiative measuring the impossible T2 - 13th international Metrology Congress CY - Lille, France DA - 2007-06-18 PY - 2007 AN - OPUS4-15031 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schartel, Bernhard A1 - Perret, Birgit A1 - Dittrich, Bettina A1 - Ciesielski, M. A1 - Krämer, J. A1 - Müller, P. A1 - Altstädt, V. A1 - Zang, L. A1 - Döring, M. T1 - Flame retardancy of polymers: the role of specific reactions in the condensed phase N2 - Condensed-phase mechanisms play a major role in fire-retardant polymers. Generations of development have followed the concept of charring to improve fire properties. Whereas the principal reactions are believed to be known, the specific description for multicomponent systems is lacking, as is the picture across different systems. A two-step approach is proposed in general, and also presented in greater detail. The second step covers the specific reactions controlling charring, whereas the actual reactants are provided in the preceding step. This model consistently incorporates the variety of structure–property relationships reported. A comprehensive case study is presented on seven phosphorus flame retardants in two epoxy resins to breathe life into the two-step approach. KW - Charring KW - Epoxy KW - Flame retardancy KW - Pyrolysis KW - Thermogravimetric analysis (TGA) PY - 2016 DO - https://doi.org/10.1002/mame.201500250 SN - 1438-7492 SN - 1439-2054 VL - 301 IS - 1 SP - 9 EP - 35 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-35273 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Meng, Birgit A1 - Fontana, Patrick A1 - Müller, Urs ED - Stephan, D. T1 - Nano-Gefügeanalytik als Optimierungsgrundlage für innovative Baustoffe - am Beispiel zementgebundener Baustoffe KW - Nanotechnologie KW - Analytik KW - Gefüge KW - Zement KW - Beton PY - 2007 SN - 3-89958-348-9 IS - 8 SP - 36 EP - 49 PB - Kassel University Press GmbH CY - Kassel AN - OPUS4-16363 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meng, Birgit A1 - Fontana, Patrick A1 - Müller, U. A1 - Bürgisser, P. ED - Uzoegbo, H.C. ED - Schmidt, Wolfram T1 - Influence of natural pozzolans on the risk of alkali silica reaction N2 - Industrial byproducts and natural pozzolanas are increasingly being used as supplementary cementitious materials. In the group of natural pozzolanas volcanic ashes are the most prominent. Despite the fact that volcanic pozzolanas were used since Roman times, not much is known about their role in influencing the long term durability of concrete. The paper presents results of the volcanic pozzolana ‘Rhenish trass’, which is quarried in western Germany and its role during an alkali silica reaction (ASR). Field data and laboratory experiments indicate that trass releases alkalis into the pore solution but also changes cement paste chemistry and alkali binding behavior. There seems to be a sensitive balance between alkali release and increase of alkali binding capacity, both mechanisms crucial for the course of an ASR in concrete. T2 - ACCTA - International conference on advances in cement and concrete technology in Africa 2013 CY - Johannesburg, South Africa DA - 28.01.2013 KW - Alkali silica reaction KW - Natural pozzolans KW - Microscopy KW - Micro chemical analysis PY - 2013 SN - 978-3-9815360-3-4 SP - 801 EP - 808 AN - OPUS4-27765 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlegel, Moritz-Caspar A1 - Müller, Urs A1 - Panne, Ulrich A1 - Emmerling, Franziska A1 - Meng, Birgit ED - Rogge, A. ED - Meng, B. T1 - Neue Wege in der Zementanalytik - Hochaufgelöste in-situ Sy-XRD T2 - 52. DAfStb-Forschungskolloquium CY - Berlin, Deutschland DA - 2011-11-07 PY - 2011 SN - 978-3-9814281-0-0 SP - 18 EP - 24 PB - BAM Bundesanstalt für Materialforschung und -prüfung CY - Berlin AN - OPUS4-25197 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -