TY - CONF A1 - Bethke, John T1 - Stand der Normung (ISO/DIS 16495)/ Revision der BAM-GGR 004 / Entwicklung eines "Kochbuches" (Leitfaden für die Prüfung von Gefahrgutverpackungen) T2 - Sitzung des BAM AK Prüfstellen CY - Berlin, Germany DA - 2011-09-23 PY - 2011 AN - OPUS4-26322 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bethke, John T1 - BAM-GGR 012 - Nachweis der ausreichenden chemischen Verträglichkeit von Verpackungen zur Beförderung gefährlicher Güter aus Polyethylen und aus koextrudiertem Kunststoff gegenüber flüssigen Stoffen. T2 - Sitzung des BAM AK Prüfstellen, BAM CY - Berlin, Germany DA - 2011-09-23 PY - 2011 AN - OPUS4-26323 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bethke, John T1 - Stand der Normung (ISO/DIS 16495) / Revision der BAM-GGR 004 / Entwicklung eines "Kochbuches" (Leitfaden für die Prüfung von Gefahrgutverpackungen) T2 - Sitzung der BAM AK Prüfstellen CY - Berlin, Germany DA - 2011-09-23 PY - 2011 AN - OPUS4-24414 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bethke, John T1 - BAM-GGR 012 - Nachweis der ausreichenden chemischen Verträglichkeit von Verpackungen zur Beförderung gefährlicher Güter aus Polyethylen und aus koextrudiertem Kunststoff gegenüber flüssigen Stoffen T2 - Sitzung der BAM AK Prüfstellen CY - Berlin, Germany DA - 2011-09-23 PY - 2011 AN - OPUS4-24415 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bethke, John A1 - Goedecke, Thomas A1 - Jahnke, Wolfgang T1 - Barrieren manchmal notwendig KW - Permeation KW - Gefahrguttransport KW - Container KW - Untere Explosionsgrenze KW - Explosionsfähiges Gemisch KW - Luftwechselrate KW - Klimamessfahrt PY - 2008 SN - 0016-5808 VL - 4 SP - 26 EP - 29 PB - Storck CY - Hamburg AN - OPUS4-17466 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bethke, John A1 - Otremba, Frank A1 - Goedecke, Thomas T1 - Risiken durch Permeation beim Gefahrguttransport in Container T2 - Innovationsforum Luftsicherheit, BAM CY - Berlin, Germany DA - 2008-07-04 PY - 2008 AN - OPUS4-17694 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bethke, John A1 - Otremba, Frank A1 - Goedecke, Thomas T1 - Permeation though plastics packagings during transport; consequences or the provisions T2 - PTEG Meeting, Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin, Germany DA - 2009-03-25 PY - 2009 AN - OPUS4-19173 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bethke, John T1 - Assimilierungsliste: welche Vorteile bietet sie, welche Änderungen stehen an? T2 - Fachveranstaltung Haus der Technik "Gefahrgutverpackungen in der Praxis", BAM CY - Berlin, Germany DA - 2010-10-26 PY - 2010 AN - OPUS4-22249 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bethke, John T1 - Der CBRN-Aktionsplan der EU - Auswirkungen auf den Chemikalientransport! T2 - Chemikalien Sicher Transportieren - 2012 CY - Vienna, Austria DA - 2012-10-15 PY - 2012 AN - OPUS4-26819 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bethke, John T1 - Machbarkeitsstudie "PET-Verpackungen für Gefahrgut" T2 - Sitzung des BAM AK Prüfstellen CY - Berlin, Germany DA - 2012-09-13 PY - 2012 AN - OPUS4-27120 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bethke, John T1 - Revision der BAM-GGR002 T2 - Sitzung des BAM AK Inspektionsstellen CY - Berlin, Germany DA - 2012-09-11 PY - 2012 AN - OPUS4-27121 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bethke, John T1 - EU-Projekt "Bestandsaufnahme guter Praktiken bei der CBRN-Transportsicherheit" T2 - 13. Gefahrgut-Technik-Tage Berlin CY - Berlin, Germany DA - 2012-11-12 PY - 2012 AN - OPUS4-27194 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bethke, John T1 - Verpackungsnormen in Theorie und Praxis T2 - 13. Gefahrgut-Technik-Tage Berlin CY - Berlin, Germany DA - 2012-11-12 PY - 2012 AN - OPUS4-27195 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schlick-Hasper, Eva A1 - Bethke, John A1 - Vogler, Nico A1 - Goedecke, Thomas T1 - Flow properties of powdery or granular filling substances of dangerous goods packagings - Comparison of the measurement of the angle of repose and the determination of the Hausner ratio N2 - To ensure safety when transporting dangerous goods, it is important to specify the flow properties of the respective solid filling substance of the packagings. For this purpose, the angle of repose is currently used for the UN approvals in Germany. Measurements were carried out on 12 powdery or granular substances applying the angle of repose measuring methods customary in the test centres. The results of the methods differ significantly from each other. In addition, some of the techniques cannot be applied for very cohesive or coarse-grained materials. The results for the angle of repose show a strong scatter for some constellations (coefficient of variation more than 20 %). Safety during transport of dangerous goods cannot be guaranteed with this currently practiced system of measuring the angle of repose. As a consequence, an alternative parameter to characterize the flow properties of bulk materials should be used in the recognized test centers for dangerous goods packagings, such as the Hausner ratio. This approach leads to more precise test results for the substances examined (maximum coefficient of variation 2.8 %). It also has advantages in terms of applicability and occupational safety. Since the flow properties are safety-relevant, both in terms of mechanical safety and safety against the release of dangerous substances, the testing practice in the recognized test labs should be improved and standardized. KW - Sift-proofness KW - Powders KW - Flowability KW - Flow properties KW - Angle of repose KW - Hausner ratio PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-552990 DO - https://doi.org/10.1002/pts.2678 SP - 1 EP - 18 PB - Wiley online library AN - OPUS4-55299 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bethke, John A1 - Goedecke, Thomas A1 - Jahnke, Wolfgang T1 - Permeation through plastic dangerous goods packaging during transport in freight containers - Detection of potentially explosive mixtures in containers under normal conditions of carriage N2 - The key point within the scope of this research project was to find out whether there was a risk of creating an explosive atmosphere by permeation of flammable liquid compounds during transport of dangerous goods in freight containers under normal conditions of carriage. Therefore, all aspects that had an influence on the formation of such an atmosphere had to be considered. The most important influencing factors were permeation, air change in the freight container and ambient temperature. The first step was to investigate the permeation with different packaging materials, charge and temperatures. Furthermore, the air change rates of different freight containers were measured. A few climate tests with containers on ships, e.g. to Singapore, were performed to assess normal conditions of carriage. Another important point was measuring the solvent (toluene) concentration in the gas phase in a freight container loaded with plastic intermediate bulk containers (IBCs) filled with toluene. To confirm that the measured values were in the right range, the toluene concentration in the gas phase in a container was calculated with different packaging materials, air change rates and temperatures. The results of the measurements and calculations have shown that safety layers in the packaging wall, e.g. the copolymer of ethylene and vinyl alcohol (EVOH) and polyamide, can reduce the rate of permeation by more than a decimal power, but the lower explosive limit of toluene is easily reached within a few hours at 40°C charge temperature if there is no barrier. KW - Permeation KW - Air change KW - Dangerous goods KW - Lower explosive limit KW - Freight container PY - 2013 DO - https://doi.org/10.1002/pts.994 SN - 0894-3214 VL - 26 IS - 1 SP - 1 EP - 15 PB - Wiley CY - Chichester, UK AN - OPUS4-31075 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bethke, John A1 - Goedecke, Thomas A1 - Otremba, Frank T1 - Hazard of build-up of an explosive atmosphere during transport of dangerous goods in plastics packagings by permeation T2 - International Confeerence UN-packaging CY - Langesund, Norway DA - 2009-06-16 PY - 2009 AN - OPUS4-19559 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bethke, John A1 - Goedecke, Thomas A1 - Jahnke, Wolfgang A1 - Otremba, Frank T1 - Permeation beim Gefahrguttransport im Container - Ermittlung explosionsfähiger Gemische beim Gefahrguttransport unter normalen Beförderungesbedingungen T2 - Wissenschaftliches Symposium "Hamburger Verpackungsgespräche" 2009 CY - Hamburg, Germany DA - 2009-02-13 PY - 2009 AN - OPUS4-18976 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Goedecke, Thomas A1 - Bethke, John A1 - Jahnke, Wolfgang A1 - Otremba, Frank ED - Karl-Friedrich Ziegahn, T1 - Ermittlung explosionsfähiger Gemische beim Gefahrguttransport unter normalen Beförderungsbedingungen T2 - 38. Jahrestagung der GUS 2009 - Umwelteinflüsse erfassen, simulieren, bewerten CY - Karlsruhe DA - 2009-03-18 KW - Permeation KW - Packagings for dangerous goods KW - Freight containers KW - Explosive atmosphere KW - Solvents PY - 2009 SN - 978-3-9810472-7-1 IS - V 19 SP - 227 EP - 237 PB - DWS Werbeagentur und Verlag GmbH CY - Karlsruhe AN - OPUS4-23256 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erhard, Anton A1 - Goedecke, Thomas A1 - Menrad, Andreas A1 - Bethke, John T1 - Application of nondestructive testing - Methods for packaging examination N2 - Nondestructive testing (NDT) methods are applicable in many ways for defect detection as well as optimization of packaging production processes. The visual inspection method is the technique which is mostly used, although neither the customer nor a skilled inspector may be aware of this. Techniques like ultrasound for wall thickness measurement, the application of x-ray techniques or the use of dye penetrant techniques for crack detection are rather well known to the NDT family. However, acoustic emission techniques can also be helpful for the characterization of packaging materials. In this paper the employment of x-ray computer tomography (CT) for measurement of wall thickness in plastic jerrycans, especially on the edges, and its possible optimization of production processes will be discussed. A comparison of the CT and ultrasonic examinations of wall thickness and the reliability of this measured data are also important points for the discussion, especially if some safety factors can be derived from the results. The leakage test is also good for jerrycans, IBCs or other kinds of drums for the transportation and storage of dangerous goods. The disadvantage of this kind of test is that a lack of quality, e.g. wall thickness deterioration, cannot be detected if the wall thickness withstands the internal pressure. Therefore, especially for Quality assurance, the other, previously mentioned techniques are better for a statistical assessment of a batch. This paper is focused on the comparison of different NDT results with special emphasis on the large range of material mechanical properties. T2 - 25th IAPRI Symposium on Packaging CY - Berlin, Germany DA - 16.05.2011 KW - Materialeigenschaft KW - Zerstörungsfreie Prüfung KW - Computertomographie KW - Kunststoffbehälter PY - 2011 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-239191 SN - 978-3-940283-31-3 VL - 126 SP - 1 EP - 7 PB - Deutsche Gesellschaft für Zerstörungsfreie Prüfung (DGZfP) CY - Berlin AN - OPUS4-23919 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bethke, John T1 - Erster internationaler Prüflaborvergleich für bei UN-zugelassenen Gefahrgutverpackungen angewandte Prüfmethoden T2 - BAM AK-Prüfstellen CY - Berlin, Germany DA - 2009-06-09 PY - 2009 AN - OPUS4-19512 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bethke, John T1 - Stand der Normung / Revision und Neueinführung von BAM-GGRs T2 - BAM AK-Prüfstellen CY - Berlin, Germany DA - 2010-09-22 PY - 2010 AN - OPUS4-22152 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bethke, John T1 - BAM-GGR 012 - eine neue Gefahrgutregel für den Nachweis der chemischen Verträglichkeit von Verpackungen zur Beförderung gefährlicher Güter aus PE und aus koextrudiertem Kunststoff T2 - AK-Inspektionsstellen, BAM CY - Berlin, Germany DA - 2010-09-28 PY - 2010 AN - OPUS4-22153 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bethke, John T1 - BAM-GGR011 - der Entwurf neuer Verfahrensregeln für den Nachweis der ausreichenden chemischen Verträglichkeit von Verpackungen zur Beförderung gefährlicher Güter aus PE und aus koextrudiertem Kunststoff gegenüber flüssigen Stoffen T2 - ERFA-Verpackungen, BAM CY - Berlin, Germany DA - 2010-07-07 PY - 2010 AN - OPUS4-22154 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schlick-Hasper, Eva A1 - Bethke, John A1 - Jahnke, Wolfgang A1 - Drousch, Björn A1 - Goedecke, Thomas A1 - Kraume, M. T1 - Maximum gauge pressure in dangerous goods packagings under normal conditions of carriage - comparison of direct measurement and calculation N2 - The objective of this work was to determine the maximum gauge pressure in the vapour phase above the liquid in different design types of dangerous goods packagings under normal conditions of carriage. The design types investigated were steel and plastic packagings with a volume of approximately 6 l. Two different methods were applied. In method 1, the pressure inside the packaging filled with a certain filling substance (dichloromethane) was directly measured under simulated conditions of carriage (degree of filling: 90%; filling temperature: 15°C; temperature during storage: 31°C). The maximum measured gauge pressures were between 89 mbar for a light plastic jerrican and 336 mbar for a steel drum. In method 2, the gauge pressure was calculated. The consideration of a rigid packaging combined with the assumption of a vapour pressure of zero during filling and sealing can serve as a worst case scenario. The calculated gauge pressure is approximately 1061 mbar. This procedure leads to the highest safety factor and does not require any experimental investigations. For a more realistic approximation of the gauge pressure of a non-rigid packaging, a packaging-specific function of relative expansion can be used, which is determined by a hydraulic pressure test. The calculated values ranged from 105 to 347 mbar. Method 2 provides conservative results. No hazardous filling substance is needed, and it allows a prediction of gauge pressure for other temperatures, substances and filling degrees. Therefore, this method could serve as alternative to UN Model Regulations 6.1.5.5.4 (a). KW - Dangerous goods packagings KW - Gauge pressure KW - Overpressure KW - Relative expansion KW - Data loggers KW - Normal conditions of carriage KW - Gefahrgutverpackungen KW - Überdruck KW - Relative Ausdehnung KW - Datenlogger KW - Normale Beförderungsbedingungen PY - 2015 DO - https://doi.org/10.1002/pts.2111 SN - 0894-3214 VL - 28 IS - 5 SP - 437 EP - 460 PB - Wiley & Sons, Ltd. CY - Chichester, UK AN - OPUS4-33108 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlick-Hasper, Eva A1 - Bethke, John A1 - Jahnke, Wolfgang A1 - Goedecke, Thomas A1 - Kraume, M. T1 - Normale Beförderungsbedingungen beim Gefahrguttransport im Frachtcontainer und ihr Einfluss auf den inneren Überdruck in Gefahrgutverpackungen N2 - Der innere Überdruck, der sich unter Beförderungsbedingungen im freien Dampfraum einer Gefahrgutverpackung bildet, die mit einer gefährlichen Flüssigkeit gefüllt ist, hängt von verschiedenen Faktoren ab: Den spezifischen Stoffeigenschaften des jeweiligen Füllguts, dem Füllgrad, der Nachgiebigkeit der Verpackungsbauart, der Befülltemperatur und der Temperatur bei Beförderungsbedingungen. Zu den normalen Beförderungsbedingungen von befüllten Gefahrgutverpackungen zählt der interkontinentale Transport in Frachtcontainern. Es werden die Ergebnisse einer Klimamessfahrt vorgestellt, die mit einem instrumentierten Frachtcontainer auf der Fahrt von Hamburg nach Singapur und zurück gewonnen wurden. Hierdurch lassen sich durchschnittliche und maximale Beförderungstemperaturen beim interkontinentalen Containertransport ermitteln. Es werden Modellgleichungen vorgestellt, mit denen sich für verschiedene Annahmen der sich einstellende Überdruck in einer Gefahrgutverpackung berechnen lässt. T2 - 44. Jahrestagung der GUS 2015 CY - Stutensee-Blankenloch, Germany DA - 25.03.2015 KW - Gefahrgutverpackungen KW - Frachtcontainer KW - Überdruck PY - 2015 SN - 978-3-9816286-4-7 SP - 179 EP - 193 AN - OPUS4-33072 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bethke, John T1 - BAM-GGR002 - Ein Überblick über die wichtigsten Änderungen N2 - Die BAM-GGR002, die Gefahrgutregel für die Verfahren zur Anerkennung von Inspektionsstellen für die erstmalige und wiederkehrende Prüfung und Inspektion von Großpackmitteln (IBC) sowie zur Durchführung der erstmaligen und wiederkehrenden Prüfung und Inspektion von Großpackmitteln (IBC), wurde überarbeitet und im Mai 2016 veröffentlicht. Hier werden die wichtigsten Änderungen vorgestellt. T2 - ERFA Verpackungen 2016 CY - Berlin, Germany DA - 20.09.2016 KW - BAM-GGR002 KW - IBC KW - Großpackmittel KW - Inspektion KW - Dichtheitsprüfung PY - 2016 AN - OPUS4-39144 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Anita A1 - Schlick-Hasper, Eva A1 - Geburtig, Anja A1 - Bethke, John T1 - Stand der BAM-Forschungsvorhaben T2 - Erfahrungsaustausch Verpackungen CY - Berlin DA - 2014-09-16 PY - 2014 AN - OPUS4-32638 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bethke, John T1 - Entwicklung der Prüfanforderungen für Gefahrgutverpackungen vom Fass über IBC bis zur Großverpackung N2 - Seit es Gefahrgüter gibt, besteht auch der Bedarf für eine sichere Gefahrgutumschließung. Von den Holzfässern für Schießpulver bis zu den heutigen Großpackmitteln (IBC) und Großverpackungen hat sich die Gefahrgutverpackung weiterentwickelt und sich den jeweiligen Erfordernissen angepasst. Die Sicherheit war neben den ökonomischen Belangen immer ein wichtiger Aspekt. Mit dem zunehmenden Transport gefährlicher Güter nach 1945 auch im internationalen Maßstab war, um einen guten weltweiten Qualitätsstandard bei den Gefahrgutverpackungen zu erreichen, eine einheitliche Regelung bei den Prüfanforderungen für die entsprechenden Verpackungen notwendig. Die damals entwickelten Prüfvorschriften sind zum größten Teil bis heute gültig. KW - Prüfanforderungen KW - Gefahrgutverpackungen KW - IBC KW - Großverpackung PY - 2017 VL - 2017 IS - Sonderausgabe SP - 10 EP - 13 PB - Bundesanzeiger Verlag CY - Köln AN - OPUS4-42613 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schmidt, Anita A1 - Bethke, John A1 - Burckhart, Andreas T1 - Die neuen Sachkundigen N2 - IBC- Die BAM hat ihre Gefahrgutregel (GGR) 002 einer Revision unterzogen. In der nun vorliegenden 6.Fassung ist festgelegt, wie bisherige Sachkundige "kleine" Inspektionen durchführen können. KW - Gefahrgut KW - IBC KW - Inspektion KW - Inspektionsstelle PY - 2016 SN - 0016-5808 IS - 6 SP - 28 EP - 29 PB - Storck Verlag Hamburg CY - Hamburg AN - OPUS4-38164 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schlick-Hasper, Eva A1 - Bethke, John A1 - Goedecke, Thomas T1 - How To Measure The Angle of Repose of Hazardous Substances in the Test Centers for Dangerous Goods Packagings N2 - The flow properties of powdery or granular filling substances for dangerous goods packagings are safety-relevant parameters. To specify the flow behavior, the angle of repose is measured in the recognized test centers for dangerous goods packagings in Germany. Previous investigations performed on non-hazardous substances revealed that some of the methods currently used have disadvantages in application. Additionally, for occupational health and safety reasons, it was generally viewed critically to carry out measurements of the angle of repose for dangerous goods at all. Instead, the dimensionless Hausner ratio to describe the flow behavior was proposed. In this work, the investigations were extended to real hazardous substances to concretize the assessment. Five exemplary hazardous substances were tested for their angle of repose using the methods commonly applied in the test centers. The Hausner ratio was also determined. In addition, the influence of a different climatic preconditioning on the angle of repose measurement was examined using three selected non-hazardous bulk materials. The results show that the measurement of the angle of repose is not fundamentally excluded for dangerous goods. However, for reasons of applicability, repeatability and occupational health and safety, only the ISO method can be applied for dangerous filling substances. This method provides conservative results regarding a safety-related evaluation of flow properties for the transport of dangerous goods. In principle, both the ISO method and the determination of the Hausner ratio can be used for dangerous goods. It is also essential especially with finely powdered filling goods, to carry out controlled preconditioning. KW - Angle of repose KW - Flow properties KW - Flowability KW - Hausner ratio KW - Powders KW - Sift-proofness PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-576552 DO - https://doi.org/10.1002/pts.2756 SN - 0894-3214 SP - 1 EP - 20 PB - Wiley AN - OPUS4-57655 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -