TY - CONF A1 - Berger, Anka T1 - BAM Research Programm - SAPT Related to the safe transport of polymerizing substances N2 - Präsentation zum geplanten BAM-Forschungsvorhaben ("Safe transport of stabilized polymerizing substances: Investigation on the degradation of selected stabilizers"), bezogen auf den sicheren Transport (Straße, See) von polymerisierenden Substanzen. Der Schwerpunkt liegt dabei auf den systematischen Untersuchungen - mittels Thermal Activity Monitor (TAM IV) - zum zeitlichen Abbau des Stabilisators bei der Polymerisation sowie auf der Bestimmung der entsprechenden volumenabhängigen selbstbeschleunigenden Polymerisation (SAPT). T2 - IGUS EOS ad hoc working groups - "Testing of solid oxidizers" / "Classification of energetic substances" / "Revision of test series H" CY - Frankfurt am Main, Germany DA - 21.11.2022 KW - SAPT KW - Prüfserie-H KW - Polymerisierende Stoffe KW - Zeitlicher Abbau von Stabilisatoren KW - Thermisches Verhalten KW - Transport KW - TAM IV PY - 2022 AN - OPUS4-56474 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Berger, Anka T1 - Exchange of experts - UN methods according to UN-MTC N2 - The presentation is an overview about the UN methods and the procedure regarding the classification of self-reactive substances and organic peroxides according to the UN-Manual of Tests and Criteria. T2 - Exchange of Experts - BAM, Fachbereich 2.3 and Korea Fire Institute (KFI) CY - Berlin, Germany DA - 25.06.2024 KW - UN-Manual of Tests and Criteria KW - UN-Methods KW - Classification of Dangerous Goods KW - Self-reactive substances KW - Organic peroxides PY - 2024 AN - OPUS4-60732 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Anca-Couce, A. A1 - Berger, Anka A1 - Zobel, N. T1 - How to determine consistent biomass pyrolysis kinetics in a parallel reaction scheme N2 - This paper discusses a method for determining the kinetics of biomass pyrolysis based on comparing isoconversional methods, such as the Kissinger and KAS methods, and least squares fitting in a parallel reaction scheme with three pseudo-components roughly representing cellulose, hemicellulose and lignin. The activation energies of the different pseudo-components reported in the literature vary widely. This variation could be reduced if care were taken to determine the kinetics of biomass pyrolysis: First, the reference experiments with pure cellulose are reproduced to validate the thermogravimetric analysis. Then, experiments are performed and analyzed with different heating rates and isoconversional methods are employed to verify the reliability of the experiments and to avoid selecting inappropriate reaction models in a fitting routine. KW - Kinetics KW - Biomass KW - Pyrolysis KW - Isoconversional KW - Fitting PY - 2014 DO - https://doi.org/10.1016/j.fuel.2014.01.014 SN - 0016-2361 VL - 123 SP - 230 EP - 240 PB - Elsevier Ltd. CY - Amsterdam AN - OPUS4-31176 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Berger, Anka A1 - Anca-Couce, A. A1 - Dieguez-Alonso, A. A1 - Zobel, N. A1 - Kienzl, N. A1 - Behrendt, F. T1 - Influence of heterogeneous secondary reactions during slow pyrolysis on char oxidation reactivity of woody biomass N2 - The influence of heterogeneous secondary reactions on char oxidation reactivity, which can take place during slow pyrolysis processes in a woody biomass particle, is analyzed in this study. To this end, the oxidative behavior of primary char produced in a thermobalance with initial wood masses of a few milligrams is compared to the behavior of char produced under conditions enhancing secondary reactions, i.e., large particle and bed sizes in fixed-bed reactors. The influence of the Maximum conversion temperature, heating rate, and catalytic effect of inorganics is also studied to compare the effect of each parameter. Results show that a significant reduction in reactivity takes place when char is produced under conditions enhancing These secondary reactions during pyrolysis. The effect is of similar order as the effect as a result of thermal annealing at 900 °C or the catalytic effect of alkali and alkaline earth metals. Therefore, the presence of heterogeneous secondary reactions during pyrolysis should be taken into account in studies addressing biomass char reactivity. Furthermore, it is shown that the reduction of reactivity as a result of secondary reactions is related to neither the loss of oxygen-containing functional groups nor the potential blocking of pores, specially micropores, resulting from the formation of this secondary char. The explanation may, therefore, lie on the deactivation or blocking of active sites by the secondary char. KW - Char conversion KW - Char reactivity KW - Pyrolysis KW - Woody biomass KW - Thermogravimetric analysis KW - TGA PY - 2017 DO - https://doi.org/10.1021/acs.energyfuels.6b02350 SN - 0887-0624 SN - 1520-5029 VL - 31 IS - 3 SP - 2335 EP - 2344 PB - ACS Publications AN - OPUS4-40189 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Berger, Anka T1 - Thermoanalytische Untersuchungen von Plasmabeschichteten Polyolefinen mit Flammenschutzeigenschaften T2 - Die 21. Kalorimetrietage CY - Braunschweig, Deutschland DA - 27.05.2015 PY - 2015 AN - OPUS4-33384 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Berger, Anka T1 - Untersuchungen zur thermischen Zersetzung von Azodicarboxylaten mittels STA-FTIR-MS T2 - Die 21. Kalorimetrietage CY - Braunschweig, Deutschland DA - 2015-05-27 PY - 2015 AN - OPUS4-33385 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Berger, Anka A1 - Krause, Ulrich ED - Matthias Kühle-Weidemeier, T1 - Vermeidung der Selbstentzündung bei Deponiestoffen und Recyclingmaterialien T2 - 3. Praxistagung Deponie, Zwischenlager - Deponien - Nachsorge CY - Hannover, Deutschland DA - 2008-12-02 KW - Abfallstoffe KW - Recyclingstoffe KW - Brandverhütung KW - Selbstentzündung KW - Numerische Simulation KW - Solid wastes KW - Recycling materials KW - Fire prevention KW - Self-ignition KW - Numerical simulation PY - 2008 SN - 978-3-86727-801-0 SP - 36 EP - 47 PB - Cuvillier AN - OPUS4-18564 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Berger, Anka T1 - Vorstellung des Leitfadens für die sichere Lagerung von Recyclingstoffen T2 - Workshop: "Brandvermeidung in Recycling-Zwischenlagern", Ministerium für Ländliche Entwicklung, Umwelt und Verbraucherschutz (MLUV) des Landes Brandenburg CY - Potsdam, Germany DA - 2009-01-22 PY - 2009 AN - OPUS4-18800 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Berger, Anka T1 - Ergebnisse von Laboruntersuchungen zum Zündverhalten von Recyclingstoffen T2 - Workshop: "Brandvermeidung in Recycling-Zwischenlagern", Ministerium für Ländliche Entwicklung, Umwelt und Verbraucherschutz (MLUV) des Landes Brandenburg CY - Potsdam, Germany DA - 2009-01-22 PY - 2009 AN - OPUS4-18801 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Krüger, Simone A1 - Berger, Anka A1 - Krause, Ulrich T1 - Chemisch-analytische Untersuchung von Brandprodukten aus Recycling-Zwischenlagern N2 - Organische Produkte, wie Papier/Pappe, Textilien oder Kunststoffe, sind meist brennbar. In Recycling-Zwischenlagern werden solche Stoffe in großen Mengen gelagert. In der vorliegenden Arbeit wurde untersucht, welche gasförmigen Produkte im Falle eines Brandes – verursacht z. B. durch Selbstentzündung – entstehen. Verschiedene Fraktionen (Papier/Pappe, Textilien und Kunststoffe) aus Recycling-Zwischenlagern wurden zunächst mechanisch zerkleinert. Dazu wurden die Proben aus den jeweiligen Fraktionen so zerkleinert, dass letztendlich homogene Verteilungen vorlagen. Mit Hilfe von verschiedenen Zerkleinerungsmühlen konnten auf diese Weise Korngrößen bis zu 0,2 mm erhalten werden. Diese homogenen Probenverteilungen wurden anschließend im DIN-Rohr nach DIN 53436 verschwelt. Die entstehenden Rauchgase wurden mit Hilfe der FTIR-Spektroskopie brandanalytisch untersucht. Dabei unterschied sich die Zusammensetzung der Rauchgase beim Verschwelprozess teilweise erheblich. Die bei der Verschwelung entstehenden Rauchgase enthalten bei Brandstoffen ohne Heteroatome in erster Linie toxische Bestandteile, wie Kohlenmonoxid und Kohlendioxid. Bei der Verschwelung von Kunststoffen mit Heteroatomen können zusätzlich zu den Hauptkomponenten Kohlenmonoxid, Kohlendioxid und Wasser auch noch weitere toxische Rauchgaskomponenten nachgewiesen werden. Dabei kommt es bei chlorhaltigen Kunststoffen vorwiegend zur Bildung von Chlorwasserstoff, bei stickstoffhaltigen Kunststoffen zur Bildung von Ammoniak und Blausäure. KW - Recycling-Zwischenlager KW - Rauchgase KW - Analytik KW - FTIR-Spektroskopie KW - Kunststoffe KW - Papier KW - Pappe KW - Textilien KW - Schwelbrand PY - 2009 SN - 0027-2957 SN - 1863-9763 VL - 41 IS - 6 SP - 298 EP - 303 PB - Erich Schmidt CY - Berlin AN - OPUS4-19613 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Berger, Anka T1 - Analysis of emissions from fires of wastes and recycling materials. T2 - First Internaional Conference on Recycling and Reuse of Materials (Polymers, Wood, Leather, Water, Glass, Metals, Ceramics, Semi Conductors, etc.) and their Products (ICRM - 2009) CY - Kottayam, India DA - 2009-07-17 PY - 2009 AN - OPUS4-19757 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Berger, Anka A1 - Krause, Ulrich T1 - Brandvermeidung bei Recyclingmaterialien KW - Recyclingstoffe KW - Selbstentzündung KW - Haldenbrand KW - Brandsimulation PY - 2009 SN - 0042-1804 VL - 58 IS - 3 SP - 153 EP - 159 PB - Kohlhammer CY - Stuttgart AN - OPUS4-19797 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter A1 - Berger, Anka T1 - Explosive Properties and Thermal Hazards of Azodicarboxylates T2 - IGUS Energetic and Oxidising Substances (EOS) Working Group Meeting CY - Tokyo, Japan DA - 2010-05-26 PY - 2010 AN - OPUS4-21360 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Berger, Anka T1 - Vermeidung der Selbstentzündung von Deponiestoffen und Recyclingmaterialien T2 - BAM-Kolloquium Sicherheit in Technik und Chemie CY - Berlin, Germany DA - 2010-05-19 PY - 2010 AN - OPUS4-21390 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Berger, Anka T1 - Assessment of the Explosive Properties and Thermal Hazards of Azodicarboxylates T2 - Joint Symposium on Thermal Analysis and Calorimetry GEFTA-PTKAT-CWGTA CY - Dresden, Germany DA - 2010-05-26 PY - 2010 AN - OPUS4-21392 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Berger, Anka A1 - Krause, Ulrich T1 - Investigations on the self-ignition of deposits containing combustibles N2 - Self-ignition of deposited combustibles is a possible reason for excessive fires occurring on deposits for recycling materials or on waste dumps. Two series of experiments were performed to assess the hazard of self-ignition: hot storage tests with different homogeneous mixtures of combustible material and inert material and tests with pockets of combustible material embedded in inert matter. In the first test series considerable exothermicity (ΔT>60K) was observed for mass fractions of combustible material as low as 2.5%. In the second series it could be shown that the heat transfer from a pocket of burning material through the inert matter can ignite a second pocket of combustible matter. Based on the experimental data, numerical simulations were performed to predict self-ignition on real-scale waste deposits. For a deposit of specific size and shape, the influence of the ambient temperature on the occurrence of self-ignition has been investigated. KW - Self-ignition KW - Hot storage tests KW - Cellulose KW - Municipal solid waste KW - Numerical simulations PY - 2008 DO - https://doi.org/10.1002/fam.966 SN - 0308-0501 SN - 1099-1018 VL - 32 IS - 4 SP - 231 EP - 248 PB - Heyden CY - London AN - OPUS4-17577 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ferrero, Fabio A1 - Malow, Marcus A1 - Berger, Anka A1 - Noll, Matthias T1 - Brandvermeidung bei der Lagerung von biogenen Brennstoffen am Beispiel von Kiefernholz T2 - Experten Workshop "Lagerung von Holzhackschnitzeln" CY - Potsdam-Bornim, Deutschland DA - 2008-06-18 KW - Selbstentzündung KW - Brandverhütung KW - Lagerung KW - Biomasse KW - Schüttgüter PY - 2008 SN - 0947-7314 IS - 63 SP - 32 EP - 44 CY - Potsdam AN - OPUS4-19043 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Berger, Anka T1 - Azodicarboxylates: Explosive Properties and Thermal Hazards T2 - 12th Annual Symposium, Mary Kay O'Connor Process Safety Center "Beyond Regulatory Compliance: Making Safety Second Nature" Texas A&M University CY - College Station, TX, USA DA - 2009-10-27 PY - 2009 AN - OPUS4-20233 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Berger, Anka A1 - Wehrstedt, Klaus-Dieter T1 - Azodicarboxylates: Explosive properties and thermal hazards N2 - A large number of Azodicarboxylates and their derivatives are produced and used in the chemical industries. The versatile applications of these Azodicarboxylates in research institutes and in the chemical industries for chemical synthesis arouse additional hazards. The aim of this paper is to obtain a predication about the structure-response relationship regarding the explosive properties and the thermal hazards of different versatile used Azodicarboxylates. The substances were examined with the Differential Scanning Calorimetry (DSC). Furthermore, different laboratory test methods, based on the UN Recommendations on the Transport of Dangerous Goods, were applied to determine the explosive properties of the mentioned substances. T2 - 12th Annual symposium, Mary Kay O´Connor Process Safety Center "Beyond regulatory compliance: making safety second nature" CY - College Station, Texas, USA DA - 2009-10-27 KW - Azodicarboxylates KW - Thermal decomposition KW - Differential scanning calorimetry (DSC) KW - Explosive properties PY - 2009 SN - 978-0-692-00459-3 IS - Chapter "Explosion - I" SP - 192 EP - 202 AN - OPUS4-20278 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Berger, Anka A1 - Wehrstedt, Klaus-Dieter T1 - Azodicarboxylates: Explosive properties and DSC measurements N2 - A large number of azodicarboxylates and their derivatives are produced and used in the chemical industries. The versatile applications of these azodicarboxylates in research institutes and in the chemical industries for chemical synthesis arouse additional hazards. The intent of this paper is to obtain first knowledge about the structure–response relationship regarding the explosive properties and the thermal hazards of different versatile used azodicarboxylates. The substances are examined with the differential scanning calorimetry (DSC). Furthermore, different laboratory test methods, based on the UN Recommendations on the Transport of Dangerous Goods, are applied to determine the explosive properties of the mentioned substances. On the basis of the obtained results, the known influence of the nitrogen content within the molecule regarding their thermal behaviour could be confirmed. The measured heat of decomposition appeared to be proportional to the nitrogen content within the group of the aliphatic and the aromatic azodicarboxylates. To emphasize this dependency, further investigations should be done. The long term objective of this research is to develop structure–response relationships of the explosive properties and the thermal hazards originating from azodicarboxylates. KW - Azodicarboxylates KW - Thermal decomposition KW - Differential scanning calorimetry (DSC) KW - Explosive properties PY - 2010 DO - https://doi.org/10.1016/j.jlp.2010.06.019 SN - 0950-4230 SN - 1873-3352 VL - 23 IS - 6 SP - 734 EP - 739 PB - Butterworth CY - Guildford, Surrey AN - OPUS4-22652 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Berger, Anka A1 - Krüger, Simone A1 - Krause, Ulrich T1 - Chemisch-analytische Untersuchung von Brandprodukten aus verschiedenen Deponiefraktionen T2 - 4. Praxistagung Deponie 2010 CY - Hannover, Deutschland DA - 2010-11-30 KW - Recyclingstoffe KW - Zwischenlager KW - FTIR-Spektroskopie KW - Verschwelung KW - Rauchgasanalyse KW - Recycling materials KW - Intermediate storage KW - FTIR-spectroscopy KW - Smouldering KW - Analysis of smoke PY - 2010 SN - 978-3-86955-555-3 SP - 1 EP - 17(?) AN - OPUS4-22728 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Berger, Anka T1 - Chemisch-analytische Untersuchung von Brandprodukten aus verschiedenen Deponiefraktionen T2 - Praxistagung Deponie 2010, Wasteconsult International CY - Hanover, Germany DA - 2010-11-30 PY - 2010 AN - OPUS4-22711 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Berger, Anka T1 - Untersuchungen zur thermischen Stabilität von Nitrocellulosefilmen T2 - 19. Ulm-Freiberger Kalorimetrietage CY - Freiberg, Germany DA - 2011-03-16 PY - 2011 AN - OPUS4-23359 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Krause, Ulrich A1 - Krüger, Simone A1 - Berger, Anka T1 - Bewertung von Brandgefahr und Rauchgastoxizität bei Recyclinglagern N2 - Brände bei der Lagerung von Deponiestoffen und Recyclingprodukten sind durch hohe Wärmefreisetzung und extreme Rauchentwicklung gekennzeichnet. Im Rauch enthalten sind in Abhängigkeit vom Ausgangsmaterial toxische oder gesundheitsgefährdende Stoffe. Löscharbeiten erfordern einen hohen Personal- und Materialaufwand und ziehen sich häufig über Tage, manchmal sogar über Wochen oder Monate hin. Der Schwerpunkt im Umgang mit solchen Materialien muss deshalb auf der Brandprävention liegen. Der vorliegende Beitrag stellt eine in der Bundesanstalt für Materialforschung und -prüfung (BAM) entwickelte Methodik vor, bei der in einer Kombination von Labortests und numerischen Simulationsrechnungen Haldengeometrien und zulässige Lagerungszeiten abgeleitet werden können, bei denen Selbstentzündung sicher vermieden wird. KW - Recycling KW - Selbstentzündung KW - Toxizität KW - Rauchgas PY - 2011 SN - 2191-0073 VL - 1 IS - 1/2 SP - 32 EP - 38 PB - Springer-VDI-Verl. CY - Düsseldorf AN - OPUS4-23381 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Berger, Anka A1 - Krause, Ulrich T1 - Zünd- und Brandverhalten von Massenschüttgütern, Deponiestoffen und Recyclingmaterialien T2 - 57. Jahresfachtagung der Vereinigung zur Förderung des Deutschen Brandschutzes e.V. CY - Bochum DA - 2008-04-27 KW - Selbstentzündung KW - Haldenbrand KW - Brandsimulation PY - 2008 SP - 549 EP - 560 CY - Altenberge AN - OPUS4-17497 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Berger, Anka T1 - Analysis of emissions from fires of wastes and recycling materials T2 - First International Conference on Recycling and Reuse of Materials (Polymers, Wood, Leather, Water, Glass, Metals, Ceramics, Semi Conductors etc) and their Products (ICRM - 2009) CY - Kottayam, India DA - 2009-07-17 PY - 2009 AN - OPUS4-19495 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Berger, Anka A1 - Krüger, Simone A1 - Krause, Ulrich ED - Kühle-Weidemeier, M. T1 - Self-ignition of deposits containing recycling materials - an underestimated phenomenon N2 - Fires on waste dumps, surface landfills, Underground stowing or storage facilities of Recycling factories may have multiple harmful effects on individuals on site and on environment. Possibly several tens of thousands of tons flare up plunging vast areas in smoke and releasing large amounts of flue gases. Experience shows that fire fighting takes days or even weeks and moreover, as long as hidden glowing nests exist fires may break out repeatedly weeks or months later. In the light of this, fire prevention is much easier to manage than extinction. It is of internst to identify the geometrical and physical conditions under which the mid-term or long-term storage of recycling materials can be performed avoiding self-ignition. Our Guideline presents a novel method developed at BAM which combines experimental tests on lab-scale with numerical simulations in Order to obtain permissible geometries of deposits and storage times at which self-ignition can be certainly avoided (Berger 2010). T2 - Waste-to-resources 2011 - 4th International Symposium MBT & MRF CY - Hannover, Germany DA - 24.05.2011 KW - Self-ignition KW - Hot storage tests KW - Numerical simulations KW - FTIR spectroscopy KW - Guideline PY - 2011 SN - 978-3-86955-747-2 SP - 1 EP - 13 PB - Cuvillier AN - OPUS4-23920 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Berger, Anka T1 - Self-ignition of deposits containing Recycling materials - an Underestimated Phenomenon T2 - IV International Symposium MBT & MRF, Waste-to-Resources CY - Hanover, Germany DA - 2011-05-24 PY - 2011 AN - OPUS4-23787 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Berger, Anka T1 - Self-heating Solids EU method A.16 - UN test N.4 T2 - ECHA Training Course "Physical and Chemical Properties" CY - Berlin, Germany DA - 2011-10-24 PY - 2011 AN - OPUS4-24752 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Anca-Couce, A. A1 - Zobel, N. A1 - Berger, Anka A1 - Behrendt, F. T1 - Smouldering of pine wood: kinetics and reaction heats N2 - A kinetic model of smouldering of pine wood is determined by thermo-gravimetric analysis (TGA), describing the reactions of wood pyrolysis, wood oxidation and char oxidation. Thermo-gravimetric experiments were conducted with constant heating rates ranging from 2.5 to 10 K/min in atmospheres of pure nitrogen and mixtures of nitrogen and oxygen (with 20.5%, 8.2% and 4.3% O2). At first wood pyrolysis and char oxidation experiments are carried out in an independent way. Then smouldering experiments are conducted, which combine the two previous reactions with wood oxidation. Finally, the heats of the reactions are determined by differential scanning calorimetry (DSC). The results are discussed, compared with the literature and the derived kinetic model is presented, which includes five components: three pseudo-components of wood – representing roughly cellulose, hemi-cellulose and lignin – as well as char and ashes. KW - Smouldering KW - Kinetics KW - TGA KW - Biomass PY - 2012 DO - https://doi.org/10.1016/j.combustflame.2011.11.015 SN - 0010-2180 SN - 1556-2921 VL - 159 IS - 4 SP - 1708 EP - 1719 PB - Elsevier Inc. CY - New York, NY AN - OPUS4-25761 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Berger, Anka A1 - Schmidt, Martin A1 - Ferrero, Fabio A1 - Krause, Ulrich T1 - Leitfaden zur Brandvermeidung durch Selbstentzündung bei der Lagerung von Recycling- und Deponiestoffen KW - Selbstentzündungsgefährdung KW - Recycling- und Deponiestoffe KW - Brandschutzmaßnahmen PY - 2010 SP - 1 EP - 16 PB - MUGV Brandenburg - Referat Presse- und Öffentlichkeitsarbeit CY - Potsdam AN - OPUS4-25391 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone A1 - Deubel, Jan A1 - Werrel, Martin A1 - Raspe, Tina A1 - Fettig, Ina A1 - Berger, Anka T1 - Brandtechnologische und chemisch-analytische Untersuchungen zum Einfluss von Brandbeschleunigern bei Zimmerbränden N2 - Anhand von 5 verschiedenen Zimmerbrandversuchen wurde der Einfluss von Brandbeschleunigern auf den Brandverlauf experimentell untersucht. Es wurden verschiedene brandtechnologische Kennwerte, wie der Massenverlust des gesamten Brandraums, Brandraumtemperaturen, die Wärmefreisetzungen sowie die Rauchgasemissionen ermittelt und beurteilt. Die Rauchgasanalyse erfolgte im Schlot, im Brandraum sowie in der Brandraumöffnung mittels Fourier Transformierte Infrarot-FTIR-Spektroskopie. Neben diesen brandtechnologischen Untersuchungen erfolgten auch chemisch-analytische Untersuchungen nach dem Brand, mit dem Ziel, den eingesetzten Brandbeschleuniger nachzuweisen. Im Anschluss an die jeweiligen Zimmerbrandversuche wurden verschiedene Brandrückstandsproben aus dem Brandschutt, Wischproben von den Wänden und den übriggebliebenen Gegenständen sowie Proben in Form von Adsorbensmaterialien und Tenax-Röhrchen genommen und mit Hilfe der HSSPME-GC-MS-Methode (Headspace-Solid Phase Micro Extraction-Gas Chromatographie-Massenspekrometrie) in Hinblick eines möglichen Brandbeschleunigernachweis analysiert. T2 - 3. Magdeburger Brand- und Explosionsschutztag / vfdb-Workshop CY - Magdeburg, Germany DA - 21.03.2013 KW - Analytik KW - Brandbeschleuniger KW - Raumbrand PY - 2013 SN - 978-3-00-041601-9 SP - 1 EP - 10 AN - OPUS4-27991 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schälike, Stefan A1 - Mishra, Kirti Bhushan A1 - Malow, Marcus A1 - Berger, Anka A1 - Wehrstedt, Klaus-Dieter A1 - Schönbucher, A. ED - Pierucci, S. ED - Klemes, J.J. ED - De Rademaeker, E. ED - Fabiano, B. ED - Buratti, S.S. T1 - Mass burning rate of a large TBPB pool fire - experimental study and modeling N2 - Data and prediction for the mass burning rate of a tert-butyl-peroxy-benzoat (TBPB) pool fire (pool diameter = 3 m) is presented. The mass burning rates of TBPB fires are up to six times higher and less dependent on pool diameter compared to hydrocarbon pool fires caused by an additional heat release rate due to exothermic decomposition reaction in the liquid phase. This heat release rate is calculated using a 1st order reaction kinetic obtained from micro calorimetric measurements. A new model is derived considering the heat release rate due to the decomposition reaction which is shown to be 100 % of the heat release rate radiated to the pool surface. With the presented model, including also physical quantities, especially the limiting fuel concentration for upward flame propagation, it is possible to predict the mass burning rates of large TBPB pool fires. The predicted values are in very good agreement with the experiments. T2 - 14th International symposium on loss prevention and safety promotion in the process industries CY - Florence, Italy DA - 12.05.2013 KW - Mass burning rate KW - TBPB (tert-butyl-peroxy benzoat) KW - Pool fire KW - Experimental study KW - Modeling PY - 2013 SN - 978-88-95608-22-8 DO - https://doi.org/10.3303/CET1331143 SN - 1974-9791 N1 - Serientitel: Chemical engineering transactions – Series title: Chemical engineering transactions IS - 31 SP - 853 EP - 858 PB - AIDIC, Associazione Italiana di Ingegneria Chimica CY - Milano AN - OPUS4-28501 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Schoßig, Jörg A1 - Berger, Anka A1 - Malow, Marcus A1 - Krause, Ulrich T1 - Beurteilung und Verhinderung von Selbstentzündung und Brandgasemission bei der Lagerung von Massenschüttgütern und Deponiestoffen N2 - Im Ergebnis des Vorhabens steht für die praktische Anwendung eine wissenschaftlich fundierte Methode der Gefahrenbewertung für Selbstentzündungsvorgänge bei der Lagerung von Massenschüttgütern, Deponiestoffen und Recyclingmaterialien zur Verfügung. Diese Methode besteht aus drei Bestandteilen: - Experimentelle Bestimmung der relevanten physiko-chemischen Eigenschaften des Materials, - Experimentelle Bestimmung des Reaktionsverhalten mittels thermischer Analyseverfahren, - Vorhersage der Selbstentzündung und des Brandverlaufes durch numerische Simulation anhand der realen Geometrie der Lageranordnung. Eine solche Methode wurde bisher nicht systematisch angewendet, weshalb sowohl bei der Erstellung von Brandschutzkonzepten durch die Betreiber von Deponien oder Recyclinglagern als auch bei der Genehmigung solcher Anlagen durch die Behörden große Unsicherheit bezüglich des vorbeugenden Brandschutzes bestehen. Diese Unsicherheiten können mit den Ergebnissen des Vorhabens ausgeräumt werden. Den Nutzen hieraus ziehen vor allem KMU, die den Hauptteil der Betreiberfirmen von Deponien und Recyclinglagern stellen. Darüber hinaus erwuchsen aus dem Vorhaben auch grundlegende Erkenntnisse zum thermischen und Reaktionsverhalten solcher Lager: - Gemische von Kunststoffen mit zellulosehaltigen oder faserartigen Stoffen sowie Gemische von Kunststoffen mit inerten Stoffen zeigen eine stärkere Selbstentzündungsgefahr als reine Kunststoffe. - Auch bei sehr geringen Anteilen brennbarer Stoffe kommt es noch zu gefährlicher Wärmefreisetzung. - Bei heterogener Verteilung der brennbaren Komponente (brennbare Einschlüsse in nicht-brennbarem Material) kann eine „Übertragung“ der Zündung zwischen brennbaren Einschlüssen erfolgen. Dies spiegelt z.B. die Situation in Lagern für Baumischabfälle wieder. Mit dem im Vorhaben entwickelten mathematischen Modell können Selbstentzündungsprozesse in beliebigen Lageranordnungen vorhergesagt werden. Die Ziele des Vorhabens wurden erreicht. Weiterer Forschungsbedarf wurde zu folgenden Teilaspekten erkannt: - Selbstentzündungsverhalten von Abfällen, die als sogenannte Ersatzbrennstoffe aufbereitet werden (Pressballen mit und ohne Folieumwicklung), - tiefer gehende Klärung der Reaktionsmechanismen beim Abbrand von Abfallgemischen. T3 - BAM Forschungsberichtreihe - 291 PY - 2010 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-1600 SN - 978-3-9813346-6-1 SN - 0938-5533 VL - 291 SP - 1 EP - 56 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-160 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Berger, Anka T1 - Abteilung 2 "Chemische Sicherheitstechnik" N2 - Der Fokus des Beitrages bestand darin, die BAM, insbesondere die Abteilung 2 (Chemische Sicherheitstechnik) als möglichen Projektpartner im Rahmen von Horizont 2020 "Sichere Gesellschaften" zu präsentieren. Dabei wurden die Kernkompetenzen der Abteilung 2, die Kooperationen zu anderen Abteilungen in der BAM bzw. einige Beispiele zu bisherigen Projekterfahrungen, hinsichtlich dem Aktivitätsfeld "Security" vorgestellt. T2 - fit4sec-Fachworkshop zur Ermittlung und Kommunikation der Endnutzerbedarfe im Rahmen von Horizont 2020 "Sichere Gesellschaften" CY - Berlin, Germany DA - 25.10.2019 KW - Horizont 2020 KW - BAM TTS KW - Auswirkungsbetrachtungen KW - Sprengwirkungshemmung PY - 2019 AN - OPUS4-50232 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krüger, Simone A1 - Berger, Anka A1 - Hofmann-Böllinghaus, Anja A1 - Krause, Ulrich T1 - Investigations of smoke gas composition during a car fire T2 - Interflam 2010 - 12th International fire science & engineering conference (Proceedings) CY - Nottingham, UK DA - 2010-07-05 KW - FTIR spectroscopy KW - Combustion KW - Smouldering KW - Fire behaviour KW - Car fire PY - 2010 SN - 978-0-9541216-6-2 N1 - Geburtsname von Hofmann-Böllinghaus, Anja: Hofmann, A. - Birth name of Hofmann-Böllinghaus, Anja: Hofmann, A. VL - 2 SP - 1755 EP - 1760 CY - London, UK AN - OPUS4-21854 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Krüger, Simone A1 - Hofmann-Böllinghaus, Anja A1 - Berger, Anka A1 - Gude, Nicolas T1 - Investigation of smoke gases and temperatures during car fire – large-scale and small-scale tests and numerical investigations N2 - The hazards for passengers during vehicle fires result from the increasing temperature and the emitted smoke gases. A fire was set on a car to investigate the development of temperature and of gaseous fire products in the passenger compartment. The study was based on a full-scale test with a reconstructed scene of a serious car fire. The aim of this work was to identify the conditions for self-rescuing of passengers during a car fire. A dummy, equipped with several thermocouples, was placed on the driver’s seat. Also, the smoke gases were continuously collected through a removable probe sensor corresponding to the nose of the dummy in the passenger compartment and analyzed using Fourier transform infrared spectroscopy. Additionally, several car components were investigated in the smoke density chamber (smoke emission and smoke gas composition). It was found that the toxic gases already reached hazardous levels by 5 min, while the temperatures at the dummy were at that time less than 80 °C. The toxicity of smoke gases was assessed using the fractional effective dose concept. The various experimentally parameters (temperature and smoke gas composition) were implemented into numerical simulations with fire dynamics simulator. Both the experimental data and the numerical simulations are presented and discussed. KW - Smoke gases KW - FTIR spectroscopy KW - Car fire KW - Temperatures KW - FED KW - Numerical simulations PY - 2016 DO - https://doi.org/10.1002/fam.2342 SN - 1099-1018 VL - 40 IS - 6 SP - 785 EP - 799 PB - Wiley CY - Sussex, UK AN - OPUS4-37518 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Krüger, Simone A1 - Berger, Anka A1 - Krause, Ulrich T1 - Chemical-analytical investigation of fire products in intermediate storages of recycling materials N2 - Organic materials like paper, cardboard, textiles or plastics are mostly flammable. In intermediate storages for recycling products, these materials are stored in large amounts. If fire occurs in these stores, large emissions of smoke and other potentially harmful products are likely. In the present study, the gaseous products released from fires of such materials—for example, because of self-ignition—were investigated. Different fractions (paper/cardboard, textiles and plastics) were crushed at low temperatures (about 80 K) and subsequently allowed to smoulder at different temperatures using the German standard Deutsches Institut für Normung 53436. The gases produced were sampled and analysed using Fourier transform infrared spectroscopy. The chemical composition of these gases differed considerably depending on fuel type. For flammable materials without heteroatom, the gases consisted predominantly of toxic compounds like carbon monoxide and carbon dioxide. Smouldering of materials containing heteroatoms showed, in addition to carbon monoxide, carbon dioxide and water vapour, further toxic components containing the heteroatom. Materials containing chlorine produced hydrogen chloride, and materials containing nitrogen produced ammonia and hydrogen cyanide. KW - Recycling deposits KW - Fire gases KW - FTIR spectroscopy KW - Plastic wastes KW - Paper wastes KW - Textile wastes KW - Smouldering fire PY - 2012 DO - https://doi.org/10.1002/fam.1098 SN - 0308-0501 SN - 1099-1018 VL - 36 IS - 3 SP - 165 EP - 175 PB - Heyden CY - London AN - OPUS4-25791 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -