TY - CONF A1 - Bandow, Nicole T1 - Auswahl von Passivsammlermaterialien für NSO-Heterocyclen im Grundwasser N2 - NSO-Heterocyclen (NSO-H) finden sich zusammen mit polycyklischen aromatischen Kohlenwasserstoffen (PAK) überwiegend an Teer- und Teeröl kontaminierten Standorten im Boden und Grundwasser. NSO-H sind ähnlich toxisch wie PAK, aber polarer und damit hydrophiler. Da NSO-H an kontaminierten Standorten lediglich einen geringen Anteil des Schadstoffinventars ausmachen, wurde ihnen in der Vergangenheit wenig Aufmerksamkeit zuteil und sie werden im Gegensatz zu PAK nicht routinemäßig erfasst. Aufgrund ihrer teilweise ausgeprägten Persistenz und der vergleichsweisen guten Wasserlöslichkeit bilden sie trotz der eher geringen Anfangskonzentrationen große Schadstofffahnen mit geringen Konzentrationen aus. Mikrobielle Abbauprozesse bewirken dabei im Verlauf der Fahne Veränderungen der Anteile der Einzelsubstanzen zueinander. In der Nähe des Schadensherdes dominieren meist PAK, im Abstrom sinkt deren Konzentration allerdings schneller, so dass hier die NSO-H die dominierende Schadstoffgruppe darstellen. Auf Grund des unterschiedlichen Abbauverhaltens kann die NSO-HBelastung über den PAK Summenparameter nicht zuverlässig bestimmt werden. T2 - Innovationstag Mittelstand 2017 CY - Berlin, Germany DA - 18.05.2017 KW - Passivsammler KW - Adsorbentien KW - NSO-Heterocyclen KW - Grundwasser PY - 2017 AN - OPUS4-40294 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bandow, Nicole T1 - Mobility of Cd in soils fertilized with sewage sludge containing Cd pigments T2 - AquaConSoil CY - Copenhagen, Denmark DA - 2015-06-08 PY - 2015 AN - OPUS4-33666 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kalbe, Ute A1 - Piechotta, Christian A1 - Bandow, Nicole T1 - Comparing PFAS analysis in batch leaching and column leaching tests N2 - Laboratory leaching tests are tools to assess the mobility of environmental contaminants released from granular materials. Comparative leaching tests were performed using four PFAS-contaminated soils whose concentration patterns of 10 selected perfluoroalkyl and polyfluoroalkyl substances (PFAS) differed due to the two types of contamination sources. This study aimed to evaluate the equivalence of two usual laboratory-scale leaching test procedures, batch and column percolation tests, at liquid-to-solid ratios (L/S) of 2 l/kg, which is the current practice within the German assessment framework, and 10 l/kg (relevant for some EU regulations such as the landfill directive). The differences between the replicates of leaching tests investigating PFAS were smaller for column percolation tests than for batch tests, probably mainly due to the greater sample size and the better representativeness of the sample portion analyzed. It was observed that batch tests overestimate the release of shorter-chain PFAS, whereby the effect was greater with carboxylic than with sulfonic acids. Currently, the limits of detection of analyses given by the DIN standard with regard to PFCA and PFSA in soils are partly not sufficient to detect very low contents, whereas the detection of selected PFCA and PFSA in eluates is more sensitive, in accordance with the available standards. This results in limitations when calculating mass balances. KW - PFAS KW - Leaching KW - Column percolation test KW - Batch test KW - Soil PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-618187 DO - https://doi.org/10.1007/s11356-024-35510-0 SN - 1614-7499 VL - 31 IS - 57 SP - 65233 EP - 65251 PB - Springer Science and Business Media LLC AN - OPUS4-61818 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Simon, Franz-Georg A1 - Kalbe, Ute A1 - Bandow, Nicole T1 - Potential use of incineration bottom ash in construction – Evaluation of environmental impact N2 - The results from a long-term lysimeter experiment with incineration bottom ash irrigated with artificial rain are reported. Whereas chloride concentration dropped significantly, the release of antimony increased during the course of the experiment as a result of aging processes. T2 - 10th International Conference on the Environmental and Technical Implications of Construction with Alternative Materials, WASCON 2018 CY - Tampere, Finland DA - 06.06.2018 KW - Leaching KW - MSWI Bottom Ash KW - Lysimeter KW - Antimony PY - 2018 SN - 978-951-758-631-3 SN - 0356-9403 SP - 108 EP - 110 AN - OPUS4-45416 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bandow, Nicole T1 - Determination of leaching behaviour of vanadium from masonry T2 - SETAC Europe CY - Basel, Switzerland DA - 2014-05-12 PY - 2014 AN - OPUS4-30763 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kalbe, Ute A1 - Bandow, Nicole A1 - Holm, Olaf A1 - Simon, Franz-Georg T1 - Elutionsverhalten der Produkte eines alternativen Verfahrens zur Aufbereitung von HMVA N2 - Im Rahmen eines ZIM-geförderten Projektes wurde eine nass-mechanische Aufbereitung von Hausmüllverbrennungsasche (HMVA) hinsichtlich der Mengen und der Qualitäten generierter Fraktionen optimiert. Dabei standen besonders die Qualitäten der mineralischen Fraktionen, die mengenmäßig den größten Anteil darstellen, im Vordergrund, da sie für einen möglichen Einsatz als Baustoff nutzbar gemacht werden sollen. Insbesondere die Chlorid- und Sulfatgehalte sollten dafür reduziert werden. Durch die BAM wurde im Projekt u. a. die Freisetzung von umweltrelevanten Stoffen in den mineralischen Fraktionen untersucht. Dafür wurden Schütteleluate als Übereinstimmungstest und Eluate aus Lysimeterversuchen im Labormaßstab zur Bewertung des Langzeitverhaltens auf ihre Inhaltsstoffe analysiert. KW - Elutionsverhalten KW - HMVA KW - Ersatzbaustoff KW - Lysimeter PY - 2016 SN - 0039-2162 VL - 67 IS - 8 SP - 619 EP - 623 PB - Kirschbaum Verlag CY - Bonn AN - OPUS4-37213 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bandow, Nicole T1 - Freisetzung aus reaktiven Brandschutzbeschichtungen N2 - Reaktive Flammschutzbeschichtungen bilden im Brandfall einen wärmeisolierenden Schaum, der die Stahlträger schützt. Diese Beschichtungen erhalten eine komplexe Mischung aus verschiedenen Chemikalien wie Additiven, Füllstoffen und Lösungsmitteln, die bei Kontakt mit Wasser freigesetzt werden können. Für eine Beurteilung der Auswirkung der auswaschbaren Substanzen auf die Umwelt sollte die gesamte Mischung und nicht nur Einzelkomponenten herangezogen werden. Ziel der vorgestellten Untersuchung war es die Frage zu klären, ob Elutionsverfahren in Kombination mit ökotoxikologischer Testung verwendet werden können, um eine Gefährdung der Umwelt auszuschließen. Das Freisetzungspotential aus den drei Beschichtungen wurde mit Hilfe von zwei verschiedenen Elutionsverfahren nach DIN/TS 16637-2 (Probe ist permanent in Wasser getaucht) und DIN EN 16105 mehrere (Immersions- und Trocknungszyklen) untersucht. Neben chemischen Parametern (pH-Wert, Leitfähigkeit, Gesamtkohlenstoff, Kationen- und Anionenkonzentration und ein Screening auf organische Substanzen), wurde auch die Wirkung auf verschiedene Organismen (Algen, Daphnien, Fischembryonen und Leuchtbakterien) und die Gentoxizität (AMES) untersucht. Insgesamt zeigen die Eluate keine bis moderate Toxizität, wobei ein Produkt eine deutlich höhere Toxizität als die anderen beiden Produkte aufweist. Die Eluate zeigen insgesamt eine geringe Leitfähigkeit von 20 bis 150 µS/cm und eine geringe Freisetzung von Kationen und Anionen, die oft unter oder in der Nähe der Bestimmungsgrenze liegen. Lediglich Zink, Barium und Phosphat konnten in nahezu allen Fraktionen des Tests nach DIN/TS 16637-2 nachgewiesen werden. Im Gegensatz dazu lag Phosphat in den Fraktionen des intermittierenden Tests unter der Nachweisgrenze. Dies ist wahrscheinlich auf die kürzere Kontaktzeit zurückzuführen. Die Barium und Zinkkonzentrationen sind ebenfalls geringer im Vergleich zum DIN/TS 16637-2. Das Konzentrationsprofil der DOC-Konzentration ist für die beiden Tests ebenfalls unterschiedlich: im intermittierenden Test sinkt die Konzentration mit den Immersionszyklen, während bei dem Test mit ständigen Tauchen die Konzentration in den letzten Fraktionen steigt. Ein Vergleich der Ökotoxizität der ersten Fraktionen und der Fraktion 7 zeigt, dass diese ebenfalls ansteigt. Die Kombination der beiden Tests ermöglicht es, nach Produkten mit einem größeren und kleineren Risiko für die Umwelt zu unterscheiden. Allerdings müssen die Fraktionen, die für diese Testung ausgewählt werden je nach Elutionstest, Verwendungsszenario und Konzentrationsprofil der Analyten sorgfältig ausgewählt werden. T2 - SETAC-GLB 2016 CY - Tübingen, Germany DA - 05.08.2016 KW - DSLT KW - Elutionstests KW - Ökotoxizitätstests KW - Bauprodukte PY - 2016 AN - OPUS4-37575 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bandow, Nicole T1 - Determination of the eco-toxicological risk of eluates of steel coated with reactive flameproof coatings N2 - Flame retardants are increasingly used in consumer products as e.g. electronics and furniture as well as in construction. Along with the increased usage, concerns about negative effects of flame retardants on human health and the environment have been raised. Concerning construction products one application for flame retardants is the furnishing of steel structures with reactive flameproof coatings. These coatings consist of a complex mixture of different chemicals, additives and solvents. For the evaluation of the risk possibly posed by their application to the environment, this whole mixture should be tested. Two different leaching tests were applied according to DIN/TS 16637-2 (sample permantly submerged in water) and DIN EN 16105 (immersion and drying cycles), respectively, which can be used for plate-like products. Eluates were divided into subsamples for the measurement of different parameters: pH-value, conductivity, total organic carbon (TOC), cation and anion concentration. For screening of organic compounds, aqueous samples were liquid/liquid extracted using three solvents with different polarity (toluene, hexane and ethylacetate). GC-MS chromatograms were recorded in the SCAN mode and mass spectra of the peaks were compared with spectras stored in the NIST library. Eluates of leaching test accroding to DIN CEN TS 16637-2 showed low electrical conductivity (20 to 150 µS/cm) and low release of cation and anions often near the LOQ. Diffferences could be observed for plates treated with the reactive coating at both sides and plates coated only at one side, while the other side is only furnished by the corrosive protection layer. Release of TOC and Zn was approx twice or 10 fold higher in the case of plates coated on one side. Furthermore, the comparison of the results for both types of plates showed that a large portion of the released compounds originate rather from the corrosion protection layer than from the reactive coating itself. Leaching tests according to DIN EN 16105 have not been finished yet, but first results show that the conductivity is much lower (1-4 µS/cm) than for the tests according to DIN/TS 16637-2 leading to the assumption that the release of compounds is lower. By comparison of the mass spectra with library data, mainly organic solvents as xylene, 1-methoxy-2-propanol acetate and n-btuyl carbamate have been tentatively identified so far in the first test fraction done by DIN CEN TS 16637-2. T2 - SETAC Europe 2016 CY - Nantes, France DA - 22.05.2016 KW - flame proof coatings KW - leaching KW - risk assessment PY - 2016 AN - OPUS4-36356 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Heisterkamp, I. A1 - Gartiser, S. A1 - Kalbe, Ute A1 - Bandow, Nicole T1 - Ökotoxikologische Bewertung reaktiver Brandschutzbeschichtungen N2 - Kurzfassung Die Umweltverträglichkeit reaktiver Brandschutzbeschichtungen wurde anhand einer Kombination von Auslaugprüfungen und nachfolgender Ökotoxizitätstestung bewertet. Hierzu wurden drei repräsentative reaktive Brandschutz-beschichtungssysteme, die vom Anwendungsbereich her einer direkten Bewitterung ausgesetzt sein können, untersucht. Der Aufbau bestand aus einem Stahlkörper, der Grundierung, einem Haftvermittler, der reaktiven Komponente sowie einem Deckanstrich. Die Prüfkörper wurden in Auslaugversuche nach DIN EN 16105 (Intermittierender Wasserkontakttest mit 9 Immersionszyklen je 1 h Tauchen, 4 h Trocknung und erneut 1 h Tauchen, Flüssig-zu-Flächen (L/A) Verhältnis 25 L/m²) und CEN/TS 16637-2 (Horizontale dynamische Oberflächenauslaugprüfung, DSLT, 8 Fraktionen mit einem L/A Verhältnis von 25 L/m²) getestet. Nachfolgend wurden die DSLT-Eluate hinsichtlich ihrer ökotoxischen Effekte im Algentest (DIN EN ISO 8692), Daphnientest (DIN EN ISO 6341), Fischeitest (DIN EN ISO 15088), Leuchtbakterientest (DIN EN ISO 11348-2) und umu-Test (ISO 13829) sowie bei einem TOC über 10 mg/L im Respirometertest (OECD 301 F) untersucht. Es wurden je eine Eluatmischung der beiden ersten DSLT-Fraktionen sowie ein Eluat nach längerer Exposition (Fraktion 7) untersucht. Zusätzlich wurden Blindwertkontrollen über das gesamte Verfahren mitgetestet. In den DSLT-Eluaten wurden mit Ausnahme von Zink (Zn) und Barium (Ba) geringe Konzentrationen an Kationen bestimmt. Im GC-MS Screening wurden insbesondere Phenol, 1-Methoxypropylacetat und Benzaldehyd detektiert. Der TOC war in der Fraktion 1 und 2 (Gesamtelutionsdauer 24 h) deutlich geringer, als in der 7. Fraktion (Gesamtelutionsdauer 36 Tage). Als Grund sind ein Aufweichen der Beschichtung sowie die um Faktor 20 verlängerte Kontaktzeit zu nennen. Die Ökotoxizitäten stiegen in der 7. Fraktion deutlich an und erreichten im Leuchtbakterientest Werte bis zu LIDL = 256, während in den vereinigten 1. und 2. Fraktionen lediglich bis zu LIDL=24 bestimmt wurden. Der Daphnientest sprach nur in der 7. Fraktion eines Herstellers an (LIDD = 8), der Fischeitest zeigte in keinem Eluat Effekte. Keine der Proben war im umu-Test gentoxisch. Die Eluate der Fraktion 7 zeigten eine deutliche Abbaubarkeit der organischen Inhaltsstoffe von 69 bis 88%. Im intermittierenden Tauchtest wurden nur geringe Konzentrationen an Kationen und Anionen im Eluat nachgewiesen. Die berechneten kumulativen Freisetzungen bewegen sich zwischen 10 und 54 mg/m² für Phosphat, zwischen 0,3 und 3 mg/m² für Zn sowie zwischen 0,2 und 0,7 mg/m² für Ba. Im Gegensatz zum DSLT lagen die TOC-Werte der Eluate deutlich niedriger (bis 5 mg/L) und nahmen mit Zunahme der Versuchsdauer ab. Es wurden Vorschläge für ein geeignetes Untersuchungskonzept für reaktive Brandschutzbeschichtungen erarbeitet. N2 - The environmental compatibility of reactive flameproof coatings was investigated by a combination of leaching tests and subsequent ecotoxicological testing. Three representative flameproof coating systems were chosen, which are directly exposed to outside weathering in their range of application. Such flameproof coating systems comprise a base body of steel a priming coat, an adhesion-promoting agent, the reactive flameproof component and a top coat. The test specimens were tested using two leaching procedures: DIN EN 16105 (tank test applying intermittent contact with water in 9 immersion cycles whereby each cycle consists of 1 h submerging, 4 h drying, and again 1h submerging of the sample at an liquid-to-surface area (L/A) ratio of 25 L/m²) as well as CEN/TS 16637-2 (Horizontal dynamic surface leaching test DSLT comprising 8 fractions at an L/A ratio of 25 L/m²). The eluates of the DSL test were then studied considering their ecotoxicological effects using algal toxicity test (DIN EN ISO 8692), acute Daphnia toxicity test (DIN EN ISO 6341), fish egg test (DIN EN ISO 15088), luminescent bacteria test (DIN EN ISO 11348-2) and umu-genotoxicity-test (ISO 13829) as well as manometric respirometry test according to OECD 301F at TOC (Total Organic Carbon) contents above 10 mg/L in the eluate. A mixture of the first two eluate fractions of the DSL test as well as a fraction representing a longer immersion time (fraction 7) were analysed in the ecotoxicological tests. Additionally, blank test control eluates covering the whole procedure were also tested. In the DSLT eluates low concentrations of the cations analyzed were found except for zinc (Zn) and barium (Ba). In the GC-MS screening in particular, phenol, 1-methoxypropylacetate and benzaldehyde were detected. The TOC content of the first two eluate fractions (at a total test duration of 24 h) was significantly lower compared to the TOC content in the seventh fraction (at a total test duration of 36 days) probably due to maceration of the coating and the longer contact time by a factor of 20. The ecotoxicological effects in the seventh eluate fraction increased significantly and reached values up to LIDL = 256 for the luminescent bacteria test whereas only values up to LIDL=24 were determined for the combined first two fractions. Effects in the daphnia toxicity test were only observed in the seventh fraction for one of the three investigated systems of flameproof coatings (LIDD = 8). No effects were found using the fish egg test and no genotoxicity was observed for all investigated eluates. The eluates of the seventh fractions showed a significant biodegradability of organic ingredients of 69 to 88%. In the tank test using intermittent contact with water only low concentrations of cations and anions were analyzed in the eluates. The cumulative release calculated ranges between 10 to 54 mg/m² for phosphate, 0.3 to 3 mg/m² for Zn and 0.2 to 0.7 mg/m² for Ba respectively. Unlike observed with the DSLT, the TOC values of the eluates were much lower (maximum 5 mg/L) and decreased with increasing test duration. Recommendations for a suitable approach in testing of reactive flameproof coatings were derived from the results. N2 - L’éco-compatibilité des revêtements de protection contre le feu réactifs a été évaluée en utilisant une combinaison d’élution et de tests d’écotoxicité. Trois systèmes de revêtements ignifuges réactifs représentatifs, qui sont directement exposés aux intempéries à l'extérieur dans leur application, ont été examinés. Les systèmes sont composés d'un corps métallique, une couche primaire, un agent de liaison, un élément réactif et une couche de finition. Les spécimens d’éssai ont été testé selon la norme DIN EN 16105 (test de contact avec l'eau intermittent avec 9 cycles d'immersion : 1 heure d’immersion, 4 heures de séchage et 1 heure d'immersion, relation liquide á superficie (L/A) de 25 L/m2) et CEN / TS 16637-2 (test de lixiviation de surface horizontale dynamique DSLT, 8 fractions avec une relation L/A de 25 L/m2). Ensuite, les éluats de DSLT ont été étudiés concernant leurs effets écotoxicologiques par le test d'algues (DIN EN ISO 8692), le test de daphnie (DIN EN ISO 6341), le test des œufs de poissons (DIN EN ISO 15088), le test de bactéries luminescentes (DIN EN ISO 11348-2), le test umu (ISO 13829) et par un test de respirometer (OECD 301 F) lorsque le TOC était plus de 10 mg/L). Respectivement aux deux premières fractions DSLT, une mixture d’éluat a été examinée, ainsi qu’un éluat après une exposition prolongée (fraction 7). Additionnellement, des contrôles de valeurs à blancs ont été testés pendant toute la procédure. Dans les éluats DSLT, des faibles concentrations de cations autres que le zinc (Zn) et le baryum (Ba) ont été déterminées. Dans le cadre du dépistage GC-MS, en particulier du phénol, du 1-méthoxypropyle et du benzaldéhyde ont été détectés. Le TOC a été significativement inférieur pour la première et seconde fraction (élution de durée 24 h) pour la 7ème fraction (élution durée 36 jours). La raison est un ramollissement du revêtement et la durée prolongée par un facteur de 20 fois. Les effets écotoxicologiques ont augmenté significativement pour la septième fraction et ont atteint des valeurs jusqu'à LIDL = 256 pour le test de bactéries luminescentes, alors que dans le combiné de la première et la seconde fraction, seulement LIDL = 24 ont été déterminés. La test de daphnie ne montre une toxicité que dans le septième fraction (LIDD = 8), le test des œufs de poisson n’a montré aucun effet des éluats. Les échantillons n’étaient pas génotoxiques dans le umu test. Les éluats de la septième fraction ont montré une biodégradabilité significative des ingrédients organiques de 69-88%. Dans l'essai d'immersion intermittent, des concentrations de cations et anions faibles ont été détectés dans l'éluat. Les rejets cumulés calculés constituent de 10-54 mg/m² pour le phosphate, entre 0,3 et 3 mg/m² pour le Zn et de 0,2 à 0,7 mg/m² pour le Ba. Contrairement au DSLT, les valeurs TOC des éluats étaient beaucoup plus faibles (jusqu'à 5 mg/L) et abaissaient avec l'augmentation de la durée de l'essai. Des propositions d’un concept d'étude approprié pour les revêtements de protection contre le feu réactifs ont été élaborées. KW - Reaktive Brandschutzbeschichtungen KW - Elutionsverhalten KW - Ökotoxikologische Bewertung PY - 2016 SN - 978-3-8167-9836-1 VL - T3342 SP - 1 EP - 152 PB - Fraunhofer IRB Verlag AN - OPUS4-38538 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - BOOK A1 - Kalbe, Ute A1 - Susset, Bernd A1 - Bandow, Nicole T1 - Umweltverträglichkeit von Kunststoffbelägen auf Sportfreianlagen - Modellierung der Stofffreisetzung aus Sportböden auf Kunststoffbasis zur Bewertung der Boden- und Grundwasserverträglichkeit N2 - Dieses Buch ist die Fortstzung des 2012 ebenfalls in der Schriftenreihe des Bundesinstituts für Sportwissenschaft (2012,02) erschienenen Berichts zum Thema "Umweltverträglichkeit von Kunststoff- und Kunststoffrasenbelägen auf Sportfreianlagen". Bei der ersten Untersuchung lag der Focus auf der Entwicklung von Testmethoden im Labormaßstab, die eine Bewertung des Schadstoffaustrags und des möglichen Gefahrenpotentials für Mensch und Umwelt ermöglichen. Folgerichtig setzte sich das aktuelle Projekt nun mit der Modellierung der Stofffreisetzung auseinander. Diese ist Voraussetzung für eine Bewertung der Boden- und Grundwasserverträglichkeit der untersuchten Sportbodensysteme. KW - Sportbodenbelag KW - Kunststoffrasenbelag KW - Freisetzung von Schadstoffen KW - Umweltverträglichkeit PY - 2016 UR - http://www.sportverlag-strauss.de/schriftenreihe-des-bundesinstituts-fuumlr-sportwissenschaft_107/umweltvertraumlglichkeit-von-kunststoffbelaumlgen-auf-sportfreianlagen_37701.htm SN - 978-3-86884-536-5 VL - 2016/05 SP - 1 EP - 428 PB - Sportverlag Strauß CY - Hellenthal AN - OPUS4-38640 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bandow, Nicole T1 - Leaching of brominated flame retardants - eluate analysis using XRF N2 - Brominated flame retardants have widely been used for more than 50 years and have been frequently detected in environmental samples as surface water and fish. Leaching from construction products was identified as one possible source. The use of substances as e.g. hexabromocyclododecane (HBCCD) was restricted recently due to increasing concern about negative impacts on the environment and human health caused by the persistent, bio accumulative and toxic properties. New polymeric brominated flame retardants have been developed to replace HBCCD in expanded polystyrene (XPS), which is used for insulation of buildings. It is assumed that the release from the polymer is much smaller in comparison to release of small molecules as HBCCD. The release from the polymer may include monomers or small fragments of different size. Thus, a sum parameter is needed. According to Schlummer et al. it is possible to detect brominated molecules using X-ray fluorescence spectroscopy by determination of brome content in XPS extracts. As only small brominated compounds can be extracted it also allows for the differentiation between the two classes of compounds. This method was applied to verify the presence of different kinds of flame retardants in XPS samples and to evaluate the leaching behavior. T2 - ESAS CANAS CY - Berlin, Germany DA - 21.03.2018 KW - Leaching KW - XPS KW - Flame-retardant KW - XRF PY - 2018 AN - OPUS4-44562 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Scharf, Holger A1 - Lück, Detlef A1 - Kalbe, Ute A1 - Lehnik-Habrink, Petra A1 - Bandow, Nicole A1 - Berger, Wolfgang A1 - Sauer, Andreas T1 - Validierung von Analyseverfahren, die im Rahmen des Projektes HORIZONTAL entwickelt, jedoch nicht validiert wurden N2 - Die Normung von Analyseverfahren ermöglicht, dass Parameter unter standardisierten Bedingungen qualitätsgesichert ermittelt werden können. Insbesondere dann, wenn Verfahren in gesetzliche Regelwerke einfließen, ist es notwendig, dass die Ergebnisse sicher und vergleichbar sind und der Aufwand im Vollzug vertretbar ist. Derzeit werden viele Parameter in verschiedenen Verordnungen nach unterschiedlichen genormten Verfahren analysiert, was die Überwachungsarbeit erschwert und zudem unnötig teurer macht. Aus diesem Grund wir eine sogenannte horizontale Normung angestrebt, bei der geeignete Analyseverfahren auch Matrices-übergreifend genormt und anschließend EU-weit zitiert werden können. Grundvoraussetzung für die Verabschiedung als Norm ist die Validierung der Verfahren. Bereits vor einigen Jahren erteilte die EU ein Mandat an CEN (Europäisches Komitee zur Normung), um umweltrelevante Parameter Matrices-übergreifend zu validieren. Allerdings konnten nicht alle für diverse Verordnungsnovellen (z.B. Klärschlammverordnung) wichtigen Parameter im Rahmen dieses Projekts validiert werden. Aus diesem Grund wurde das aktuelle Vorhaben in den Umweltforschungsplan des BMUB aufgenommen und von der BAM durchgeführt. Im Forschungsvorhaben konnten im Bereich der anorganischen Parameter die CEN/TS 16170 (Elemente mit ICP-OES), CEN/TS 16171 (Elemente mit ICP-MS) und CEN/TS 16175-2 (Quecksilber mit CV-AFS) sowie im Bereich der organischen Parameter die CEN/TS 16181 (PAK mit HPLC und GC), die CEN/TS 16167 (PCB mit GC-MS und GC-ECD) und die CEN/TS 16190 (Dioxine, Furane und dl-PCB mit HR-GC-MS) für die Analyse von Klärschlamm, behandeltem Bioabfall und Boden erfolgreich validiert werden. Die validierten Verfahren stehen nun kurz vor der Verabschiedung als EN (Europäische Norm). KW - Validierung KW - Ringversuche KW - Normung KW - CEN/TC400 KW - Klärschlamm KW - Behandelter Bioabfall KW - Boden KW - Analyseverfahren KW - Umweltrelevante Elemente KW - Organische Schadstoffe PY - 2015 UR - http://www.umweltbundesamt.de/publikationen/validierung-von-analyseverfahren-die-im-rahmen-des UR - http://www.umweltbundesamt.de/sites/default/files/medien/378/publikationen/texte_42_2015_validierung_von_analyseverfahren.pdf SN - 1862-4804 N1 - Geburtsname von Sauer, Andreas: Buchholz, A. - Birth name of Sauer, Andreas: Buchholz, A. VL - 42 SP - 1 EP - 106 AN - OPUS4-33284 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Holm, Olaf A1 - Bandow, Nicole A1 - Kalbe, Ute A1 - Simon, Franz-Georg T1 - Innovative treatment trains of bottom ash (BA) from municipal solid waste incineration (MSWI) in Germany N2 - The industrial sector of bottom ash (BA) treatment from municipal solid waste incineration (MSWI) in Germany is currently changing. In order to increase the recovery rates of metals or to achieve a higher quality of mineral aggregates derived from BA, new procedures have been either implemented to existing plants or completely new treatment plants have been built recently. Three treatment trains, which are designated as entire sequences of selected processing techniques of BA, are introduced and compared. One treatment train is mainly characterized by usage of a high speed rotation accelerator whereas another is operating completely without crushing. In the third treatment train the BA is processed wet directly after incineration. The consequences for recovered metal fractions and the constitution of remaining mineral aggregates are discussed in the context of legislative and economical frameworks. Today the recycling or disposal options of mineral residues still have a high influence on the configuration and the operation mode of the treatment trains of BA despite of the high value of recovered metals. T2 - Sardinia 2015 - 15th International waste management and landfill symposium CY - S. Margherita di Pula, Cagliari, Italy DA - 05.10.2015 KW - MSWI KW - Bottom ash KW - Treatment train KW - High velocity impact crushing KW - Wet treatment KW - Recovery rates KW - Non-ferrous metals KW - Mineral aggragates KW - Recycling KW - Secondary construction material PY - 2015 SP - 1 EP - 11 AN - OPUS4-34936 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bandow, Nicole T1 - Neue Verfahren zur Bestimmung der Eluierbarkeit von anorganischen und organischen Stoffen aus Feststoffen/Bodenmaterial T2 - Sächsisch-Thüringische Bodenschutztage CY - Dresden, Deutschland DA - 2015-06-18 PY - 2015 AN - OPUS4-33667 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kalbe, Ute A1 - Bandow, Nicole A1 - Bredow, Andrea A1 - Mathies, Helena A1 - Piechotta, Christian T1 - Column leaching tests on soils containing less investigated organic pollutants N2 - Column tests are a common tool to investigate the leaching behavior of contaminated soil and waste materials. In contrast to inorganic analytes, fewer studies with organic contaminants are available based on column tests. This paper is aimed at the question if soil materials contaminated with organic pollutants can be reliably investigated by column tests. Soils contaminated with TPH (total petrol hydrocarbons), PFC (perfluorinated surfactants) and the biocide tebuconazole were used for column percolation tests. Differences in the leaching behavior are mainly driven by partitioning behavior between organic carbon and water, which can be estimated from log KOW values and size and shape of molecules. PFC show higher release (10–50% for individual compounds) than pesticides (3.7–5.3%) and TPH (< 1%) at liquid to solid ratio of 4 l/kg. All eluate concentrations are low with maximum concentrations of 50 µg/l for PFC and 1–2 mg/l for pesticides and TPH. Despite this, the observed standard deviations are quite small suggesting good repeatability. In general the observed concentration trends are similar to that from lysimeter studies found in the literature and thus, it can be concluded that laboratory column experiments are a reliable tool for organic compounds with various physico-chemical properties. KW - Column percolation leaching KW - Total petrol hydrocarbons KW - Perfluorinated surfactants KW - Pesticides PY - 2014 DO - https://doi.org/10.1016/j.gexplo.2014.06.014 SN - 0375-6742 VL - 147 IS - Part B SP - 291 EP - 297 PB - Elsevier CY - Amsterdam [u.a.] AN - OPUS4-32144 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalbe, Ute A1 - Bandow, Nicole A1 - Lehnik-Habrink, Petra A1 - Sauer, Andreas A1 - Berger, Wolfgang ED - Gidarakos, E. ED - Cossu, R. ED - Stegmann, R. T1 - Validation of procedures for content analysis of organic contaminants in soil, treated biowaste and sludge N2 - Drafit Standards for the determination of organic pollutants in environmental matrices such as sludge, treated biowaste and soil have been basically developed in the ffamework of the European Standardization project HORIZONTAL (http://horizontal.ecn.nl/home/). T2 - Crete 2014 - 4th International conference Industrial and hazardous waste management CY - Chania, Crete, Greece DA - 02.09.2014 KW - Content analysis KW - Validation ring tests KW - PAH KW - PCB KW - Dioxins KW - Furnaes KW - dl-PCB KW - Soil KW - Treted biowaste KW - Sludge KW - PCDD/PCDF PY - 2014 SN - 978-960-8475-20-5 SN - 2241-3138 N1 - Geburtsname von Sauer, Andreas: Buchholz, A. - Birth name of Sauer, Andreas: Buchholz, A. SP - 379 EP - 380 AN - OPUS4-31637 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bandow, Nicole T1 - Establishment of calibration curves for investigation of municipal solid waste incineration bottom ashes using RFA T2 - CANAS 2015 CY - Leipzig, Germany DA - 2015-03-09 PY - 2015 AN - OPUS4-32726 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bandow, Nicole T1 - Release of benzothiazole and mercaptobenzothiazole from granules used for artificial turf T2 - STEAC Europe CY - Barcelona, Spanien DA - 2015-05-03 PY - 2015 AN - OPUS4-33128 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wachtendorf, Volker A1 - Kalbe, Ute A1 - Krüger, O. A1 - Bandow, Nicole ED - Brown, R. ED - Gedde, U.W. ED - Hedenqvist, M.S. T1 - Influence of weathering on the leaching behaviour of zinc and PAH from synthetic sports surfaces N2 - Synthetic materials used for outdoor sports grounds consist of a mix of inorganic, organic and polymeric compounds that show ageing due to weathering and a complex leaching behaviour by percolation of rainwater, which can limit its lifetime. Additionally, weathering exposure induces degradation processes in the polymers, which leads to the formation of new surfaces allowing water to access additional reservoirs of leachable compounds. A laboratory test comprising artificial weathering, ozonisation and subsequent leaching was developed to investigate this behaviour in a reproducible and controllable way. The experiments showed a general decline of Zn, polycyclic aromatic hydrocarbons (PAH) and total organic carbon (TOC) concentrations after an initial increase. Within this general trend, the course of concentration over exposure duration is very specific for individual sample materials and the analyte under investigation. The results indicate that weathering and degradation behaviour cannot be predicted from initial material conditions. Thus, weathering experiments are recommended to fill this gap of knowledge. KW - Athletic tracks KW - Artificial turf KW - Ageing KW - Artificial weathering KW - Polymer degradation KW - Rubber granules KW - Leaching KW - Contamination PY - 2017 DO - https://doi.org/10.1016/j.polymertesting.2017.09.021 SN - 0142-9418 SN - 1873-2348 VL - 63 IS - October SP - 621 EP - 631 PB - Elsevier Ltd. CY - Amsterdam, The Netherlands AN - OPUS4-42205 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalbe, Ute A1 - Susset, B. A1 - Bandow, Nicole T1 - Modellierung der Stofffreisetzung und des Stofftransportes aus Materialien in Sportböden auf Kunststoffbasis (Kunststoff- undKunststoffrasenbeläge) auf Sportfreianlagen als Bewertungsgrundlage für die Boden- und Grundwasserverträglichkeit N2 - Für Sportböden in Außenanlagen haben sich Kunststoffbeläge und Kunststoffrasenbeläge als extrem nutzungsoptimierte Bodenbeläge bewährt. Neben der Benutzungsqualität ist auch die Bewertung möglicher negativer Auswirkungen auf die Umwelt durch produktionsbedingt enthaltene Schadstoffe notwendig. Sportböden auf Kunststoffbasis sind durch mehrlagige Aufbauten gekennzeichnet. Schadstoffe können in den oberen Lagen in den dort als Füllstoff verwendeten Gummigranulaten vorhanden sein. Die Gesamthöhe dieser Schichten umfasst in der Regel maximal 10 cm. Inhaltsstoffe können durch Regenwasser mobilisiert und mit dem Sickerwasser in den Boden und in das Grundwasser eingetragen werden. Durch eine Kombination von Elutionstests und numerischer Modellierung kann das Mobilisierungs- und Transportpotential ermittelt werden, um eine Boden- und Grundwassergefährdungsabschätzung auf Basis einer Sickerwasserprognose vorzunehmen. Die hier vorgestellte Studie „Umweltverträglichkeit von Kunststoffbelägen auf Sportfreianlagen- Modellierung der Stofffreisetzung aus Sportböden auf Kunststoffbasis zur Bewertung der Boden- und Grundwasserverträglichkeit“befasst sich ausschließlich mit der Stofffreisetzung und den Pfad Boden-Grundwasser (Boden- und Grundwasserschutz). Der Pfad Boden-Mensch und Belange des Gesundheitsschutzes sind nicht Gegenstand dieser Untersuchungen. T2 - Fachseminar Aktuelles im Sportplatzbau CY - Hennef, Germany DA - 02.03.2017 KW - Sportböden auf Kunststoffbasis KW - Freianlagen KW - Schadstofffreisetzung KW - Stofftransport KW - Gefahrenabschätzung Pfad Boden-Grundwasser PY - 2017 SP - 1 EP - 7 AN - OPUS4-42995 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bandow, Nicole T1 - Freisetzung aus reaktiven Brandschutzbeschichtungen N2 - Reaktive Brandschutzbeschichtungen bilden im Brandfall zum Schutz der Stahlträger einen wärmeisolierenden Schaum. Die Systeme beinhalten üblicherweise eine Grundierung, die reaktive Beschichtung und einen Deckanstrich. Jeder Bestandteil enthält eine komplexe Mischung aus verschiedenen Chemikalien wie Additiven, Füllstoffen und Lösungsmitteln, die bei Außenanwendungen in Kontakt mit Regenwasser freigesetzt werden können und negative Auswirkungen auf die Umwelt haben können. Bisher basiert die Bewertung durch das DIBt lediglich auf der Rezeptur der Beschichtungen. Erfahrungen aus dem Bodenschutz oder der Abfallverwertung zeigen, dass Gesamtgehalte alleine für eine Bewertung nicht ausreichen. Die durch Wasser mobilisierbaren Anteile werden mit Elutionsverfahren bestimmt. Ziel der vorgestellten Studie war es, die Eignung von Elutionsverfahren in Kombination mit Ökotoxizitätstests zur Beurteilung der Umweltgefährdung zu untersuchen. T2 - Tagung Bauchemie CY - Weimar, Germany DA - 18.09.2017 KW - Leachingtest KW - Ökotozitätstest KW - Zink PY - 2017 AN - OPUS4-42013 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -