TY - GEN A1 - Ono, K. A1 - Erhard, Anton T1 - Nondestructive testing, 3. Ultrasonics N2 - The field of acoustics deals with sound Propagation in solids, liquids, and gases, whereby the frequencies may lie above or below the Audio band, that is, infrasound (<16 Hz) and ultrasound (>16 kHz), respectively. The speed of sound depends on mechanical properties of the material like elastic constants and compressibility. Interaction of imperfections such as grains, cracks, pores, and inclusions with sound waves results in reflection, refraction, scattering, and attenuation due to discontinuities in elastic moduli and density. By sending a pulse and receiving its reflection, the presence and Location of defects can be determined (pulse-echo technique). Ultrasound was applied in nondestructive testing (NDT) earlier than in medicine, but visualization of the data in a unicolor-scale image was first used in medical ultrasound diagnostics. The principle of ultrasonic testing, for example, the wave types that are suitable for different applications, the frequency ränge employed, reflectivity behavior, mode conversions, probe types, and so on are described in various publications, and a newer ultrasonic method, namely, the phased array technique, is treated in. KW - Ultrasonic waves KW - Piezocomposite materials for ultrasound generation KW - Phased array technique PY - 2011 SN - 978-3-52730-673-2 DO - https://doi.org/10.1002/14356007.o17_o02 SP - 1 EP - 17 PB - Wiley-VCH AN - OPUS4-24090 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erhard, Anton T1 - Plant-specific safety review (RSK-SÜ) of German nuclear power plants in the light of the events in Fukushima-1 (Japan) T2 - IRRS follow-up Mission Germany 2011 CY - Bonn, Germany DA - 2011-09-05 PY - 2011 AN - OPUS4-24425 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erhard, Anton T1 - Application of Nondestructive Testing - Methods for Packaging Examination T2 - 25th IAPRI Symposium on Packaging, international association of packaging research institutes (IAPRI) CY - Berlin, Germany DA - 2011-05-16 PY - 2011 AN - OPUS4-23899 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erhard, Anton A1 - Völzke, Holger A1 - Probst, Ulrich A1 - Wolff, Dietmar T1 - Ageing management for long term interim storage casks T2 - PATRAM 2010 - 16th International symposium on the packaging and transport of radioactive materials CY - London, UK DA - 2010-10-03 KW - Ageing management KW - Lifetime KW - Material degradation PY - 2010 SP - 1 EP - 17 (Tuesday/T20/61) AN - OPUS4-23907 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erhard, Anton T1 - Ageing Management - very long term storage of used nuclear fuel T2 - Technical Meeting on "Very long term storage of used nuclear fuel" CY - Vienna, Austria DA - 2011-04-26 PY - 2011 AN - OPUS4-23791 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erhard, Anton T1 - Anlagenspezifische Sicherheitsüberprüfung (RSK-SÜ) deutscher Kernkraftwerke unter Berücksichtigung der Ereignisse in Fukushima-I (Japan) T2 - 56. Sitzung des Fachausschusses Reaktorsicherheit CY - Wiesbaden, Germany DA - 2011-05-24 PY - 2011 AN - OPUS4-23792 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Erhard, Anton A1 - Völzke, Holger A1 - Probst, Ulrich A1 - Wolff, Dietmar T1 - Aging management for long-term interim storage casks N2 - The aging management system for the mechanical components of nuclear power plants (NPPs) must be established and used by the licensee in such a way that the quality of safety relevant components is guaranteed for the completely designed lifetime of the NPP. This demands an extensive plant life management with special emphases on the knowledge of the degradation in material properties. The basic safety concept in Germany observes this circumstance. Lifetime extension of the German NPPs is an aim of the current valid coalition agreement of the German government. Operational extension of interim storage facilities requires, in comparison to the aging management system for NPP, an aging management system adapted to the Special circumstances of spent fuel storage casks. Extension of interim storage periods for spent fuel casks beyond the designed lifetime requires, in comparison to the components of an NPP, an increasing knowledge of material degradation with potential impact on cask integrity, e.g. leak tightness. Dry interim storage in Germany has been approved for 40 years. After that time, according to the present strategy, a final repository should be available. However, until now, such a final facility still does not exist, and the German exploration and licensing process is heavily delayed. Currently, discussions are continuing regarding further exploration of the Gorleben salt mine. There is willingness to overcome this situation that is clearly described in the available coalition agreement of the federal government. Anyway, however, the prediction is viewed; a repository for heat generating radioactive waste in Germany will not be available in the near future and may not be available when first storage facilities and casks reach their 40 years of approved lifetime, which will occur in ~25 years starting from now. Therefore, the question must be asked: what has to be done with the existing storage casks in the interim facilities? May these casks be fit for continued use, with an extension of the storage period? One option is to have an aging management system, which creates enough information about the technical condition of safety relevant cask properties. This is the basis for safety evaluation for extended storage periods. In the present paper, possible aging mechanisms for high level waste storage casks are discussed, as well as the influence of the time dependent changes of the component properties. KW - Long term interim storage KW - Storage casks KW - Aging mechanisms KW - Degradation mechanisms KW - Metal seals KW - Larson-Miller parameter PY - 2011 DO - https://doi.org/10.1179/1746510910Y.0000000013 SN - 1746-5095 SN - 1746-5109 SN - 0957-476X VL - 22 IS - 1 SP - 46 EP - 53 PB - Ramtrans Publ. CY - Ashford AN - OPUS4-23890 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erhard, Anton T1 - Storage Facilities at Sayda Bay T2 - 52. INMM-Tagung CY - Palm Desert, CA, USA DA - 2011-07-17 PY - 2011 AN - OPUS4-23891 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Erhard, Anton A1 - Otremba, Frank A1 - Mohr, F. A1 - Kilian, R. T1 - Alloy 800 steam generator tube stress corrosion cracks - detection and root cause KW - Tube inspection PY - 2012 SN - 0007-1137 VL - 54 IS - 6 SP - 1 EP - 5 PB - British Institute of Non-Destructive Testing CY - Northampton AN - OPUS4-26006 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erhard, Anton T1 - Alloy 800 Steam Generator Tube Stress Corrosion Cracks - Detection T2 - International Conference on NDE in Relation to Structural Integrity for Nuclear and Pressurized Components (9th NDE) CY - Seattle, WA, USA DA - 2012-05-22 PY - 2012 AN - OPUS4-26068 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Erhard, Anton A1 - Schuler, X. A1 - Otremba, Frank T1 - A new concept for steam generator tube integrity assessment N2 - Steam generator (SG) tubes are part of the primary circuit of pressurised water reactors and therefore also part of the pressure retaining boundary components. Furthermore, steam generator tubes are the components which guarantee the separation between the primary and secondary circuits. Therefore the knowledge of the loss of tube integrity as soon as possible is an essential. Optimised nondestructive testing methods based on the eddy current array technique are used to find material degradation, especially intergranular stress corrosion cracks during the periodical in-service inspection. These methods are supported by the measurement of the leakage rate during operation based on radioactivity and Tritium measurement regarding a high crack grows. Shutdown criteria depending on leakage rates which are described in the operation procedures but there are no specifications about the conditions for the measured leakage. Is the leakage coming from a single crack or are there multiple cracks or is this the leakage of a critical crack. With the help of FE calculations answer about the uncertainties of leakage rate versus critical crack grows were found. Shutdown criteria must guarantee to avoid critical crack sizes, i.e. between the measured tritium activity and the critical crack size must be a safety gap. KW - Steam generator tubes KW - Crack detection KW - Non destructive testing KW - Axial cracks KW - Critical crack sizes KW - Crack opening area KW - Leakage PY - 2012 DO - https://doi.org/10.1016/j.nucengdes.2012.04.014 SN - 0029-5493 SN - 1872-759X VL - 249 SP - 297 EP - 303 PB - North-Holland Publ. Co. CY - Amsterdam AN - OPUS4-26025 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erhard, Anton A1 - Noack, Volker A1 - Völzke, Holger T1 - Storage facilities at Sayda Bay N2 - Within the framework of the G8 partnership, the German Ministry of Economics and Technology has been realizing a 300 EUR million project of the storage of decommissioned Russian nuclear submarines based on a German-Russian agreement. The main parts of the project are the construction of the long-term storage facility as well as a radioactive waste storage facility at Sayda Bay. Long-term interim storage facility for this particular case has a period of about 70 years. The Energiewerke Nord GmbH (EWN) under the technical controlling of BAM carried out the project management. Foremost in this presentation is the finalization of the long-term storage facility for nuclear submarine compartments and the planning and realization of the radioactive waste storage building with special emphases of the parts carried out by BAM. Because BAM staff cannot stay permanently on site, a random inspection of different topics was the bases for the activities of BAM. The key aspects of activities are the long-term storage of the nuclear compartments, maintenance building, the decommissioning of the compartments and the transportation of the very heavy weight compartments (1600 metric tons). Details relating of the progress of the construction work as well as information about technical recommendations will also be briefly illustrated. Within this scope, problems and difficulties during the construction of the storage facility as well as logistical challenges including transportation of the reactor compartments will also be discussed. T2 - 52nd INMM Annual meeting CY - Palm Desert, CA, USA DA - 17.07.2011 KW - Storage facility KW - Nuclear reactor compartments PY - 2011 SP - 1 EP - 7 AN - OPUS4-26197 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erhard, Anton T1 - Diagnose von Bauteilen durch zerstörungsfreie Prüfung T2 - Hamburger NDT-Tage CY - Hamburg, Germany DA - 2012-11-14 PY - 2012 AN - OPUS4-26961 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Döring, Joachim A1 - Bovtun, V. A1 - Gaal, Mate A1 - Bartusch, Jürgen A1 - Erhard, Anton A1 - Kreutzbruck, Marc A1 - Yakymenko, Y. T1 - Piezoelectric and electrostrictive effects in ferroelectret ultrasonic transducers N2 - Electromechanical response of polypropylene ferroelectret transducers under application of high-voltage pulses was measured by laser Doppler vibrometry and compared with results of ultrasonic through-air transmission between two ferroelectret transducers. The electromechanical response was completely explained by piezoelectric and electrostrictive effects. The electrostrictive effect dominates at high voltages and provides significant enlargement of the transducer constant, up to factor of 2.5. The induced strain of 1.7% was achieved at – 2000 V. The nonlinear ultrasonic transmission was shown to be well described by the piezoelectric and electrostrictive response of transmitter, except in the range of high negative exciting voltages where some limitation of the transmitted signal was observed. This limitation seems not to be a fundamental one and does not abolish the advantages of high-voltage excitation of polypropylene ferroelectret transducers. KW - Electromechanical effects KW - Ferroelectric devices KW - Piezoelectric transducers KW - Piezoelectricity KW - Ultrasonic transducers KW - Ultrasonic transmission KW - Cellular polypropylene KW - Ferroelectret KW - Electrostriction PY - 2012 DO - https://doi.org/10.1063/1.4759052 SN - 0021-8979 SN - 1089-7550 VL - 112 IS - 8 SP - 084505-1 - 084505-6 PB - American Institute of Physics CY - Melville, NY AN - OPUS4-26806 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bovtun, Viktor Petrovic A1 - Döring, Joachim A1 - Bartusch, Jürgen A1 - Gaal, Mate A1 - Erhard, Anton A1 - Kreutzbruck, Marc A1 - Yakymenko, Y. T1 - Enhanced electromechanical response of ferroelectret ultrasonic transducers under high voltage excitation N2 - Polypropylene based ferroelectret films exhibit a strong electromechanical activity and provide a promising solution for the air coupled ultrasonic (ACUS) transducers. Ultrasonic transmission between two air coupled ferroelectret transducers in dependence on the amplitude and polarity of the high voltage exciting pulse revealed a strongly non-linear electromechanical response of the ferroelectret transmitter which provides an increase in the transmitter efficiency. The authors present a simple model describing both promotion and competition of the piezoelectric and electrostriction contributions, as well as increase in the transducer constant under high voltage excitation. Enlargement of the inverse transducer constant of the polypropylene ferroelectret film by a factor of 4 was demonstrated. The non-linear properties of the polypropylene ferroelectrets result in a strong increase in their ACUS figure of merit under the high voltage excitation, which exceeds the results of their technological optimisation. Consequently, enhancement of the ACUS system transmission by 12 dB and signal to noise ratio by 32 dB was achieved. KW - Air coupled ultrasonics KW - Non-contact transducers KW - Ferroelectrets KW - Piezoelectric effect KW - Electrostriction KW - Cellular polypropylene KW - Ultrasonic transducer PY - 2013 DO - https://doi.org/10.1179/1743676112Y.0000000021 SN - 1743-6753 SN - 1743-6761 VL - 112 IS - 2 SP - 97 EP - 102 PB - Maney CY - London AN - OPUS4-27880 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erhard, Anton T1 - Nuclear Power Plant Waste Management Strategy in Germany T2 - 17th International Symposium on the Packaging and Transportation of Radioactive Materials (PATRAM 2013) CY - San Francisco, CA, USA DA - 2013-08-18 PY - 2013 AN - OPUS4-28883 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erhard, Anton A1 - Otremba, Frank A1 - Mohr, F. A1 - Kilian, R. T1 - Alloy 800 steam generator tube stress corrosion cracks - Detection N2 - Intergranular stress corrosion cracking (IGSCC) in Alloy 800 steam generator tubes was until recently an unknown damage mechanism for this material. But in the meanwhile such cracks were detected within the tube sheet between upper and lower mechanical tube expansion and in the outer tube bündle periphery. The detection and the sizing of such defects were not reliable with the common NDT methods. Steam generator (SG) tube integrity constitutes the main barrier against release of activity to the secondary Circuit. When through wall cracks occur, primary water can leak into the secondary circuit due to the influence of the pressure difference between the primary and secondary circuit. Such cracks may have safety relevance if the crack growth is not negligible. Therefore optimized inspection methods are necessary fortube integrity assessment. The overall requirements in this particular case are to guarantee the tube integrity in the time between the periodically in-service inspections until the next inspection by placing special emphases of NDT methods. In the present contribution, NDT methods for the inspection of defects like IGSCC are presented. Some Statements about the root cause for this special degradation mechanism will also be described. T2 - 9th International conference on NDE in relation to structural integrity for nuclear and pressurized components CY - Seattle, USA DA - 22.05.2012 PY - 2013 SN - 978-92-79-28212-6 DO - https://doi.org/10.2790/74243 SN - 1018-5593 SP - 862 EP - 870 AN - OPUS4-28886 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erhard, Anton T1 - Anforderungen an moderne ZfP-Verfahren in der Kerntechnik T2 - Symposium Zerstörungsfreie Prüfungen in der Kerntechnik CY - Hamburg, Germany DA - 2013-09-18 PY - 2013 AN - OPUS4-29026 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Döring, Joachim A1 - Bartusch, Jürgen A1 - Gaal, Mate A1 - Kreutzbruck, Marc A1 - Erhard, Anton A1 - Bovtun, Viktor Petrovic T1 - Ferroelektret-Prüfköpfe für die zerstörungsfreie Prüfung mit Luftultraschall N2 - Für die luftgekoppelte Ultraschall-Prüfung wird der Prototyp eines neuartigen Prüfkopfes vorgestellt. Statt eines piezokeramischen Ultraschall-Wandlers mit einer λ/4-Anpassschicht wird eine Ferroelektret-Folie aus schaumförmigem Polypropylen eingesetzt. Durch die außerordentlich geringe akustische Impedanz der Folie reduzieren sich die Reflexionsverluste an den Grenzschichten zur Luft so stark, dass bei diesem Prüfkopf auf eine λ/4-Anpassschicht verzichtet werden kann. Außerdem ist die Folie hochspannungsfest. Sie konnte mit Spannungen von mehr als 3500 V angesteuert werden und erlaubte eine Vorspannung am Ultraschall-Wandler des Empfangsprüfkopfes von 2000 V. Mithilfe der hohen Anregungsspannung stieg die Amplitude des akustischen Prüfimpulses auf das 11,2-Fache. Die Empfindlichkeit des Empfängers erhöhte sich durch die Vorspannung weiter um den Faktor 4,3. Insgesamt steigt die Amplitude am Empfänger also auf das 48-Fache, bei gleichbleibendem Rauschpegel. Ein abschließender Vergleich mit kommerziellen Luftultraschall-Prüfköpfen belegt die Überlegenheit der Folien-Prüfköpfe. Damit rückt der Einsatz einer vollwertigen Impuls-Echo-Technik auch bei der luftgekoppelten Ultraschallprüfung deutlich näher. KW - Prüfkopf KW - Ferroelektret KW - Luftultraschall KW - Zerstörungsfreie Prüfung PY - 2013 SN - 0025-5300 VL - 55 IS - 2 SP - 96 EP - 102 PB - Hanser CY - München AN - OPUS4-27778 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Erhard, Anton ED - Czichos, Horst T1 - Non-destructive evaluation N2 - Non-destructive testing (NDT) methods are employed in the technical field as a precautionary to avoid accidence or emergency situations for the human and the environment. A risk situation in the technical field could happen if the load of a component is increasing and the wall thickness due to defect growth is decreasing until a critical defect situation. The result of such scenarios could be catastrophic breakdown of the component with sometimes severe aftermath for the human. PY - 2013 SN - 978-3-642-25849-7 SN - 978-3-642-25850-3 DO - https://doi.org/10.1007/978-3-642-25850-3_9 IS - Chapter 9 SP - 161 EP - 174 PB - Springer CY - Berlin Heidelberg AN - OPUS4-27739 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erhard, Anton T1 - ZfP als Basis für die Bewertung der Bauteilintegrität T2 - 200. Sitzung des Arbeitskreises Magdeburg CY - Magdeburg, Germany DA - 2013-03-06 PY - 2013 AN - OPUS4-27643 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erhard, Anton T1 - Ultrasonic Inspection of Type B Packages T2 - 17th International Symposium on Packaging and Transportation of Radioactive Materials (PATRAM) 2013 CY - San Francisco, CA, USA DA - 2013-08-18 PY - 2013 AN - OPUS4-28704 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erhard, Anton T1 - Overview about BAM T2 - Workshop mit SANDIA National Laboratories CY - Albuquerque, NM, USA DA - 2013-04-26 PY - 2013 AN - OPUS4-28275 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erhard, Anton T1 - Comparison of Pre- and In-Service Inspection Techniques in Belgium and Germany against the backdrop of Ultrasonic Indications found at the Reactor Pressure Vessel of Doel-3 N2 - The Belgian Federal Agency for Nuclear Control (FANC) informed the public in August 2012 about the finding of thousands of flaws in the core area of the reactor pressure vessel of the nuclear power plant Doel-3. This information also prompted activities in Germany. The relation to Germany was very close, since the ingots of the forged rings came from Germany. That is why questions have arisen concerning quality management during fabrication: heat treatment, pre-service inspection in general, and NDT methods in particular. The focus will be on the rules and standards at the time of fabrication in relation to the required NDT methods and their failure sensibility levels. In addition, NDT registration levels and documentation and acceptance criteria at that time are also of interest. In the German Nuclear Safety Standard KTA, it is required that the employed NDT method is based on the state-of-the-art of science and technology. After having obtained the knowledge of the flaw situation in Doel-3, the discussion regarding the inspection areas for in-service inspection of the reactor pressure vessel rose up in Germany: Is it still enough to examine only the welds, including the head affected zones, or is it necessary to examine the whole rings, i.e. including the base metal? This paper will try to give answers to these questions in the light of the standards used in Germany. In addition, the information and experiences gained from pre-service inspection as well as many inservice inspections - which are required to be carried out every 4 to 5 years – will be described. T2 - 10th International Conference on NDE in relation to Structural Integrity for Nuclear and Pressurized Components CY - Cannes, France DA - 01.10.2013 PY - 2013 AN - OPUS4-29488 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erhard, Anton T1 - Zerstörungsfreie Prüfung und Bruchmechanik T2 - 185. Sitzung des Arbeitskreises Dresden der DGZfP CY - Dresden, Germany DA - 2013-11-28 PY - 2013 AN - OPUS4-29489 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Tscharntke, Dirk A1 - Wüstenberg, Hermann A1 - Erhard, Anton T1 - Ultraschallprüfung an Schweißnähten - Bewertung kritischer Befunde mit Modellrechnungen KW - Ultraschallprüfung KW - Schweißnahtprüfung KW - Modellrechnungen PY - 2000 SN - 0025-5300 N1 - Sprachen: Deutsch/Englisch - Languages: German/English VL - 42 IS - 11-12 SP - 433 EP - 436 PB - Carl Hanser Verlag CY - München AN - OPUS4-1014 LA - mul AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wüstenberg, Hermann A1 - Erhard, Anton A1 - Neundorf, B. T1 - The role of NDT at the primary circuit in german nuclear power plants PY - 2000 SN - 0335-5004 VL - B SP - 35 EP - 39 PB - CIMAX CY - Noisy-le-Grand Cedex AN - OPUS4-1098 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Erhard, Anton A1 - Schenk, Gottfried A1 - Hauser, Th. A1 - Völz, Uwe T1 - New applications using phased array techniques N2 - In general, the application of phased array techniques used to be limited to heavy components with large wall thicknesses, such as those in the nuclear power industry. With the improvement of the phased array equipment, including phased array search units, other application areas are now accessible for the phased array inspection technique, e.g. the inspection of turbine blade roots, weld inspection with a wall thickness ranging from 12 to 40 mm, inspection of aircraft components, inspection of spot welds and the inspection of concrete building components. The objective for the use of phased array techniques has not significantly changed since their first application, e.g. instant adjustment of the sound beam to the geometry of the test object by steering incidence angle, skew angle and/or sound field focusing. Because some new phased array technique applications are still in the experimental (laboratory) stage, this article will focus on some examples for practical, real-weld applications. PY - 2001 DO - https://doi.org/10.1016/S0029-5493(00)00419-2 SN - 0029-5493 SN - 1872-759X VL - 206 IS - 2-3 SP - 325 EP - 336 PB - North-Holland Publ. Co. CY - Amsterdam AN - OPUS4-1122 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Erhard, Anton T1 - Automated ultrasonic inspection systems T2 - Meeting of NDT-Experts CY - Trest', Czech Republic DA - 2001-06-20 PY - 2001 SN - 80-2387263-X SP - 55 EP - 62 PB - Czech Society for Non-Destructive Testing CY - Trest' AN - OPUS4-1126 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Erhard, Anton A1 - Schulz, Eduard A1 - Brekow, Gerhard A1 - Wüstenberg, Hermann A1 - Kreier, P. T1 - Critical Assessments of the TOFD Approach for Ultrasonic Weld Inspection N2 - Weld inspection using ultrasonic pulse-echo techniques needs high skilled operators especially if geometrical indications must be taken into consideration. A clear separation between geometrical indications and defects like cracks must be guaranteed. This requirement needs sensitive techniques like the 45(deg) shear wave technique using the mirror effect. Since more than twenty years the Time Of Flight Diffraction technique (TOFD) is still under discussion for defect sizing. But on the other hand the potential of the TOFD technique for defect detection is described in technical papers of manufacturers. The main task of examinations carried out at BAM was the comparison about the detectability of surface breaking cracks between the common methods and the TOFD approach. T2 - 7th European Conference on Non-Destructive Testing (ECNDT) CY - Copenhagen, Denmark DA - 1998-05-26 KW - Time of flight diffraction KW - TOFD KW - Ultrasonic weld PY - 2001 SP - AD 1 EP - 199 PB - Society of Manufacturing Engineers CY - Dearborn, Mich. AN - OPUS4-1105 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Tessaro, Ute A1 - Wüstenberg, Hermann A1 - Erhard, Anton A1 - Boehm, Rainer T1 - Ultraschalluntersuchungen zur Fehlercharakterisierung im Plattierungsbereich T2 - Jahrestagung Zerstörungsfreie Materialprüfung ; 2001 (Berlin) : 2001.05.21-23 CY - Berlin, Deutschland DA - 2001-05-21 PY - 2001 UR - http://www.ndt.net/article/dgzfp01/papers/p09/p09.htm N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 75-CD PB - DGZfP CY - Berlin AN - OPUS4-1139 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Brekow, Gerhard A1 - Erhard, Anton A1 - Schulz, Eduard A1 - Siebelmann, F. A1 - Kiechle, H. T1 - Optimierung der Ultraschall-Prüftechnik bei Engspaltschweißnähten T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2001 CY - Berlin, Deutschland DA - 2001-05-21 PY - 2001 UR - http://www.ndt.net/article/dgzfp01/papers/p08/p08.htm N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 75-CD PB - DGZfP CY - Berlin AN - OPUS4-1140 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schulz, Eduard A1 - Erhard, Anton A1 - Montag, Hans-Joachim A1 - Beine, U. A1 - Lucht, B. T1 - Fehleranalyse an einer austenitischen Rohrschweißnaht T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2001 CY - Berlin, Deutschland DA - 2001-05-21 PY - 2001 UR - http://www.ndt.net/article/dgzfp01/papers/p10/p10.htm N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 75-CD PB - DGZfP CY - Berlin AN - OPUS4-1141 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erhard, Anton A1 - Bertus, Norbert A1 - Montag, Hans-Joachim A1 - Schenk, Gottfried A1 - Hintze, H. T1 - Ultrasonic Phased Array System for Railroad Axle Examination N2 - Introduction Due to the long history of railroad companies around the world, varying means of examination according to the specifications for the different railroad components have been carried out based on the general industrial progress of the country [1-3]. For more than 50 years the application of customized ultrasonic techniques for the examination of railroad components has increased, in comparison to conventional ultrasonic techniques used until to the end of 20th century. In this traditional atmosphere some accidents have disturbed the silent harmony of companies involved in the production of critical parts. More than ever high speed modern trains require modern and advanced examination techniques [4-8]. For practical application new ultrasonic techniques have been developed and optimized in co-operation with the German Railroad Company. In the present contribution the inspection of railroad axles will be described. The ultrasonic technique used for the examination is the phased array technique. The optimization of the phased array probes for the different geometries of the axles given was completed using a computer model for directivity calculations. In relation to the limited accessibility between wheel and brake angles of incidence for shear waves in the range between 28° and 72° are necessary. During the examination of the axles a a considerable amount of ultrasonic data must be stored (storage of the digitized A-scans). However, due to economic aspects the evaluation of this data should be carried out in a very short time. The whole examination of one axle should not exceed 5 minutes. Therefore we have developed a special evaluation program adapted to the particular problematic of the axle inspection. The build up of the whole inspection system was done with partners from the industry like Krautkramer and a division of the Research Department of the Deutsche Bahn AG. In this consortium the Research Department of the Deutsche Bahn AG was responsible for the specification of the inspection problem, Krautkramer for the organization of the whole technical follow up and BAM for the development and optimization of the ultrasonic inspection technique as well as for the evaluation software. Some examples concerning the optimization process will be described in the present contribution. T2 - 8th ECNDT CY - Barcelona, Spain DA - 2002-06-17 PY - 2002 UR - http://www.ndt.net/article/ecndt02/75/75.htm PB - European Federation for Non-Destructive Testing CY - Barcelona AN - OPUS4-1414 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Pohl, Rainer A1 - Erhard, Anton A1 - Montag, Hans-Joachim A1 - Thomas, Hans-Martin A1 - Wüstenberg, Hermann ED - Forde, M. C. T1 - NDT techniques for railroad wheel and gauge corner inspection T2 - 5th Railway Engineering Conference CY - London, England, UK DA - 2002-07-03 KW - Non-destructive testing method KW - Ultrasonic and eddy current techniques KW - Railway track and wheel inspection PY - 2002 SN - 0-947644-49-0 SP - 1 EP - 14(?) PB - Engineering Technics Press CY - Edingburgh AN - OPUS4-1561 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erhard, Anton A1 - Boehm, Rainer A1 - Tessaro, Ute A1 - Wüstenberg, Hermann T1 - Characterization and sizing of defects in the cladding area using ultrasonic methods T2 - 3rd International Conference on NDE in Relation to Structural Integrity for Nuclear and Pressurized Components CY - Seville, Spain DA - 2001-11-14 PY - 2002 CY - Seville AN - OPUS4-1748 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Tessaro, Ute A1 - Erhard, Anton A1 - Brekow, Gerhard A1 - Mletzko, U. T1 - Charakterisierung oberflächennaher Fehler an plattierten Komponenten mittels Gruppenstrahlertechnik N2 - Zusammenfassung Nachdem Untersuchungen mit konventionellen Prüfköpfen an plattierten Bauteilen gezeigt haben, dass es möglich ist, mit Hilfe von Beugungsanzeigen bzw. -mustern die Größe und Tiefenlage von Fehlern im Plattierungsbereich zu bestimmen, wurde die Gruppenstrahlertechnik für Fehlersuche und -charakterisierung eingesetzt. Der Vorteil bei der Arbeit mit Gruppenstrahlerprüfköpfen besteht darin, dass in einer Messfahrt eine Reihe von Einschallwinkeln abgearbeitet werden kann. Dies vereinfacht und verkürzt die Prüfung wesentlich. So wurde von der ferritischen und der plattierten Seite der Testkörper mit der Impuls-Echo-Technik im halben Sprung, der TOFD-Technik und mit Sende-Empfangs-Prüfköpfen oberflächennah geprüft. Allerdings haben alle hier aufgeführten Verfahren ihre Grenzen, so sind z.B. Fehler, die eine Fehlergröße von £ 3 mm aufweisen, kaum noch zu charakterisieren. Hier ist nur der Nachweis möglich. Es hat sich außerdem gezeigt, dass die TOFD-Technik nur als Ergänzung zu anderen Techniken eingesetzt werden sollte, da das Potenzial für die Verwendung als Suchtechnik nicht ausreichend ist. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2002 CY - Weimar, Deutschland DA - 2002-05-06 KW - Fehlergrößenbestimmung KW - Gruppenstrahlerprüfköpfe KW - TOFD KW - Impuls-Echo-Technik KW - SEL-Prüfköpfe PY - 2002 UR - http://www.ndt.net/article/dgzfp02/papers/p07/p07.htm SN - 3-931381-39-0 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 80-CD PB - DGZfP CY - Berlin AN - OPUS4-1850 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Tscharntke, Dirk A1 - Boehm, Rainer A1 - Erhard, Anton A1 - Wüstenberg, Hermann T1 - Fehlerdiagnose in der Ultraschallprüfung mit iterativer Modellierung N2 - Zusammenfassung Die verschiedenen Bewertungs- und Untersuchungsverfahren zur Fehlerdiagnose in der Ultraschallprüfung lassen in Abhängigkeit von der Prüfsituation nur eine fallweise Anwendung zu. Die erzielbaren Ergebnisse sind durch prinzipielle Grenzen, wie die orientierungsabhängigen Wechselwirkungen der Ultraschallwellen mit dem Fehler, in ihrer Genauigkeit stark begrenzt. Im allgemeinen enthalten sie nur einen Teil der für eine belastbare Fehlerdiagnose erforderlichen Informationen. Eine zuverlässige Bewertung ist meist durch die Zusammenfassung der Ergebnisse redundanter US- Verfahren und die Nutzung von a priori Informationen, z.B. aus der Fertigungsgeschichte einer Komponente, möglich. Der Einsatz mehrerer US-Prüfverfahren bedingt üblicherweise einen höheren Zeit-, Arbeits- und Kostenbedarf und sollte möglichst durch Verbesserung der Fehlerdiagnose mit einem Verfahren begrenzt werden. Die im Beitrag vorgestellte iterative Modellierung der Ultraschallprüfung bietet dazu eine Möglichkeit. Die Durchführung der Modellrechnungen beginnt mit der Aufstellung einer Fehlerhypothese unter Einführung von a priori Informationen. Die Nachrechnung der Fehlerhypothesen mit dem validierten und erprobten Modell ermöglicht den Vergleich mit den Messergebnissen. Die aufgestellten Fehlerhypothesen können so abgesichert, sowie Messergebnisse überprüft und bestätigt werden. Das Rechenmodell ermöglicht die Bewertung der Amplitude, der Laufzeit, der Echodynamik und des Anzeigenmusters, also aller auch bei anderen Bewertungs- und Untersuchungsverfahren herangezogenen Bewertungsmaßstäbe. Eine Kombination des Rechenmodells mit einer Evolutionsstrategie würde die Systematisierung des Verfahrens ermöglichen, ist jedoch mit Schwierigkeiten verbunden, wie im Beitrag gezeigt wird. Die iterative Modellierung besteht aus drei Teilprozessen, der Analyse der möglichen Wechselwirkungen, der Separation dieser Wechselwirkungen in diverse Schallwege und schließlich der Synthese der auf den verschiedenen Wegen berechneten Signale zum Gesamtsignal. Die ersten beiden Teilprozesse müssen z.Zt. auf Basis von Expertenwissen für jeden Prüffall neu gelöst werden. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2002 CY - Weimar, Deutschland DA - 2002-05-06 KW - Pipelines KW - Schweißnahtprüfung KW - Gruppenstrahlertechnik KW - Real-Time-Scanner KW - Gruppenstrahler-Prüfkopf mit 64 Schwingerelementen KW - Konventionelle Winkelprüfköpfe PY - 2002 UR - http://www.ndt.net/article/dgzfp02/papers/v54/v54.htm SN - 3-931381-39-0 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 80-CD PB - DGZfP CY - Berlin AN - OPUS4-1851 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Brekow, Gerhard A1 - Erhard, Anton A1 - Schulz, Eduard A1 - Montag, Hans-Joachim A1 - Pörtzgen, N. T1 - BAM-RTD Phased Array Konzept für die Schweißnahtprüfung von Rohrleitungen N2 - Zusammenfassung Aus den Messergebnissen geht hervor, dass der Real-Time-Scanner den Reflektor-nachweis der konventionellen Prüfköpfe hinsichtlich des erreichten S/R-Abstandes erreicht und teilweise übertrifft. Weiterhin geht aus den Ergebnissen hervor, dass die Nachweisempfindlichkeit sehr empfindlich auf Abweichungen der Prüfkopf-positionierung reagiert. Nur wenn die optimale Fahrspur für jede Reflektortiefenlage getroffen wird, kann mit den konventionellen Prüfköpfen ein S/R-Abstand von mehr als 20 dB erreicht werden. Das bedeutet, dass mit den konventionellen Prüfköpfen immer mehrere parallele Fahrspuren mit kleinem Spurversatz gefahren werden müssen, um auch kleine Fehler in der Schweißnaht nachweisen zu können. Mit dem Real-Time-Scanner-Prüfkopf können mit einer einzigen Messfahrt und mit entsprechend vielen angepassten Messfunktionen mehrere parallele Fahrspuren durch elektronisch gesteuerte Bündelverschiebung erfasst werden. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2002 CY - Weimar, Deutschland DA - 2002-05-06 KW - Pipelines KW - Schweißnahtprüfung KW - Gruppenstrahlertechnik KW - Real-Time-Scanner KW - Gruppenstrahler-Prüfkopf mit 64 Schwingerelementen KW - Konventionelle Winkelprüfköpfe PY - 2002 UR - http://www.ndt.net/article/dgzfp02/papers/p10/p10.htm SN - 3-931381-39-0 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 80-CD PB - DGZfP CY - Berlin AN - OPUS4-1852 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Erhard, Anton T1 - Untersuchungen zur Ausbreitung von Longitudinalwellen an Oberflächen bei der Materialprüfung mit Ultraschall N2 - Der Nachweis von Rissen an Oberflächen hat wegen der großen sicherheitstechnischen Relevanz dieses Bereiches auch in der zerstörungsfreien Materialprüfung mit Ultraschall an Bedeutung gewonnen. Mit der Beschreibung der Ausbreitung von Longitudinalwellen an der Oberfläche wurden der Effekt des streifenden Einfalls von LongitudinaIwellen und die Schallfeldverteilung von Longitudinalwellen-Winkelprüfköpfen im Nahfeld berechnet. T3 - BAM Forschungsberichtreihe - 88 KW - Ultraschallprüfung KW - Longitudinalwelle PY - 1983 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-3620 SN - 978-3-88314-254-9 SN - 0938-5533 VL - 88 SP - 1 EP - 42 PB - Wirtschaftsverlag NW CY - Bremerhaven AN - OPUS4-362 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erhard, Anton A1 - Schulz, Eduard T1 - Influences on crack detection in the near surface area with ultrasonic inspection techniques T2 - 29th Annual Conference of the Czech Society for Nondestructive Testing CY - Hradec Králové, Czech Republic DA - 1999-11-17 KW - Crack detection KW - Rißprüfung KW - Ultraschallprüfung PY - 1999 SP - 153 EP - 164 AN - OPUS4-717 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Erhard, Anton A1 - Heß, G. A1 - Thumser, D. A1 - Engl, G. T1 - Schmiedewellenprüfung - Vergleich von manueller und mechanisierter Ultraschallprüfung N2 - Die Ultraschallprüfung von großen Schmiedewellenrohlingen für den Turbinen- und Generatorbau mit Durchmesser bis zu 2000 mm ist nach wie vor eine Herausforderung für die Ultraschallprüfung, weil kleinste "Fehlstellen" nachgewiesen werden müssen. So sind Registriergrenzen in der Größenordnung von 1 mm Kreisscheibe in Wellenmitte durchaus gängige Praxis. Die Prüfung dieser Schmiedeteile wird derzeit meist manuell durchgeführt. Eine mechanisierte Ultraschallprüfung hat den Vorteil einer dem Prüffortschritt angepaßten reproduzierbaren Dokumentation und der Speicherung der Meßdaten in Form von A-Bildern. Bei der Verwendung der Gruppenstrahlertechnik mit deren Möglichkeit der elektronischen Schallfeldsteuerung, wie Änderung des Einschallwinkels oder Fokussierung des Schallbündels, kann eine Ultraschallprüfung des gesamten Querschnitts schnell, ortsgenau reproduzierbar und zuverlässig durchgeführt werden. Durch Speicherung der A-Bilder in einem Pixelnetz können für die Auswertung der Meßwerte Tomogramme d.h. Schnittbilder Quasi-Online erstellt werden. Durch Übernahme der Meßdaten in ein CAD-Auswerte-programm können die Ergebnisse z.B. dr können die Ergebnisse z.B. dreidimensional ortsgetreu dargestellt werden. Ein Vergleich der unterschiedlichen Ultraschallprüfergebnisse zwischen manueller und mechanisierter Prüfung wird an einer Beispielwelle vorgestellt. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 1999 CY - Celle, Deutschland DA - 1999-05-10 KW - Ultraschallprüfung KW - Schiedestück KW - Schallfeld PY - 1999 UR - http://www.ndt.net/abstract/dgzfp99/data/53.htm SN - 3-931381-27-7 VL - 1 IS - 68 SP - 467 EP - 479 PB - DGZfP CY - Berlin AN - OPUS4-706 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Erhard, Anton A1 - Neundorf, B A1 - Hansch, M. A1 - Britz, A. T1 - Bewertung und Auswertung von Ultraschallmeßdaten - VGB-Auswerterichtlinie N2 - Zur Steigerung der Zuverlässigkeit in der Prüfaussage und zur Vermeidung von Fehlinterpretationen ist es sinnvoll, die Auswertung und Bewertung von Ultra-schall-meßdaten zu vereinheitlichen. Dies ist insbesondere bei der mechanisierten Ultraschallprüfung vereinheitlichen. Dies ist insbesondere bei der mechanisierten Ultraschallprüfung gefragt, denn durch die Vielzahl der Meßdaten, der unterschiedlichen Ultraschall-Gerätetechnik und der individuell angepaßten Soft-ware sind unterschiedliche Darstellungen der Ergebnisse möglich. Eine "Standardisierung" der Aus- und Bewertung ist somit nicht möglich. Ein Ziel der hier vorzustellenden Auswerterichtlinie ist deswegen eine Vereinheitlichung der Darstellung. In der Richtlinie werden Mindestanforderungen vorgeschrieben. In diesem Beitrag werden Beispiele für die verschiedenen Darstellungsarten und die Vorgehensweise bei der Bewertung von Amplitude, Laufzeit, Dynamik und Anzeigennmuster gezeigt. Ein weiteres Ziel der Richtlinie ist, die Auswertehilfen und Auswertetechniken so zu dokumentieren, daß der Weg, der zum Prüfergeb-nis führt, jederzeit nachvollziehbar ist. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 1999 CY - Celle, Deutschland DA - 1999-05-10 KW - Ultraschallmeßverfahren PY - 1999 UR - http://www.ndt.net/abstract/dgzfp99/data/58.htm SN - 3-931381-27-7 VL - 68 IS - 68 PB - DGZfP CY - Berlin AN - OPUS4-707 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Brekow, Gerhard A1 - Erhard, Anton T1 - Untersuchungen mit TOFD an geschweißten Längsnahtproben N2 - Im Gegensatz zur Impuls-Echo-Technik, die im Wesentlichen auf der Anton Erhard, Berlin Reflexion am Fehler basiert, wird bei der Time-Of-Flight Diffraction Technique (TOFD-Technik) die Beugung der Schallwellen am Fehler zum Nachweis genutzt. Zwei Winkelprüfköpfe für Longitudinalwellen sind in V-Durchschallung angeordnet. Die Prüfköpfe befinden sich jeweils auf einer Seite der Schweißnaht und werden bei der Messung parallel zur Schweißnaht verschoben. Das ausgesandte Schallbündel trifft auf Fehlerränder, an denen gebeugte Wellenanteile entstehen, die je nach Entstehungsort mit unterschiedlichen Schalllaufzeiten empfangen, in hochfrequenten A-Bildern abgespeichert und für die Auswertung in B-Bildern dargestellt werden. Die Untersuchungen zeigen, dass die TOFD-Technik Beiträge zur Fehlergrößenabschätzung liefert, aber keinesfalls die Impuls-Echo- Technik mit nachgeschalteter Röntgenprüfung ersetzen kann. PY - 2000 SN - 0025-5300 VL - 42 IS - 11-12 SP - 437 EP - 443 PB - Carl Hanser Verlag CY - München AN - OPUS4-963 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erhard, Anton A1 - Bäßler, Ralph A1 - Weltschev, Margit T1 - Regulating the use of new materials in containment systems for dangerous goods N2 - Transportation of dangerous goods are worldwide regulated in the rules or standards e.g. in the recommendations on the Transport of Dangerous Goods of the United Nations, in the Accord Européen Relatif au Transport International des Marchandises Dangereuses par Route (ADR) etc. Addi-tional to these international regulations also national regulations and stan-dards e.g. Gefahrgutverordnung Straße und Eisenbahn (GGVSE) in Ger-many are bases for the transport of hazardous materials. For the material properties of tanks in the “BAM-List – Requirements for Tanks for the Transport of Dangerous Goods” specifications for the sub-stance prototype approval for tank materials are listed. Further compati-bility evaluations of selected metallic material groups as well as of poly-meric gasket and lining materials under the influence of dangerous goods are published in the List. There are a large number of highly corrosive dangerous goods listed, in which conventional steels are not resistant. Chemical companies, transportation providers and tank producers need tanks made of corrosion-resistant materials (corrosion retardant materi-als) in order to protect the tank shell. The application of high-alloyed stainless steels and nickel alloys as there are alloy 926 (1.4529; X1NiCrMoCuN25-20-7), alloy 31 (1.4562;X1NiCrMoCu31-27-7) and Nickel-Chromium-Molybdenum Alloy 59 (2.4605; NiCr23Mo16Al) is an al-ternative solution compared with the lining of the tanks with a polymeric material. Due to the limited number of corrosion test results with welded test sam-ples of these high-alloyed materials under the influence of corrosive dan-gerous goods BAM, Institute for Corrosion Protection (IKS) Dresden and ThyssenKrupp VDM have been performing a comprehensive test program since 2002. The program comprised corrosion resistance evaluations of the three high-alloyed materials exposed to substances representing cor-rosive dangerous goods such as inorganic halogenides, organic acidic halogenides, sulfonic acids and nitrating acids. T2 - MRS Fall Meeting 2008 - Symposium SS -Selecting and Qualifying New Materials for Use in Regulated Industries CY - Boston, MA, USA DA - 2008-12-01 KW - Korrosionsbeständigkeit KW - Superaustenite KW - Nickellegierung KW - Gefahrguttransport PY - 2008 DO - https://doi.org/10.1557/PROC-1151-SS01-02 VL - 1151E IS - Paper #: 1151-SS01-02 SP - 1 EP - 8(?) CY - Warrendale, PA, USA AN - OPUS4-19610 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Tscharntke, Dirk A1 - Wüstenberg, Hermann A1 - Erhard, Anton T1 - Bewertung kritischer Befunde bei der Ultraschallprüfung an Schweißnähten mit Modellrechnungen N2 - Typische Probleme bei der Schweißnahtprüfung mit Ultrschall entstehen bei ferritischen Werkstoffen vor allem durch Anzeigen von der Nahtkontur, vor allem aus dem Wurzelbereich. Die klassischen Methoden der Unterscheidung formbedingter Anzeigen von Fehlern - z.B. durch Vergleich der A-Bilder von beiden Seten einer Stumpfnaht - können unterstützt werden durch die Modellierung derartiger Anzeigen im Zusammenhang mit hypothetischen Fehlern im wurzelnahen Bereich. Im Beitrag wird die Anwendung vereinfachender Modelle auf diese Problematik vorgestellt und an Beispielen demonstriert. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2000 CY - Innsbruck, Österreich DA - 2000-05-29 KW - Ultraschallprüfung KW - Schweißnahtprüfung KW - Modellrechnungen PY - 2000 UR - http://www.ndt.net/abstract/dgzfp00/data/10.htm SN - 3-931381-32-3 VL - 73-1 IS - 2 SP - 105 EP - 117 PB - DGZfP CY - Berlin AN - OPUS4-936 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schulz, Eduard A1 - Erhard, Anton A1 - Heinrich, W. A1 - Mohr, F. T1 - Nachqualifikation einer Wasserreibbremse mit Ultraschall N2 - Neu entwickelte Gasturbinen werden im Prüffeld mit wechselnden Belastungen beaufschlagt. Dazu wird die Gasturbine mit einer Wasserreibbremse gekoppelt, mit der eine definierte Last erzeugt werden kann. Ursprünglich war die Wasserreibbremse für eine bestimmte Leistung, die den früheren Leistungen der Gasturbine entsprach, ausgelegt worden. Die erste Prüfung fand im Jahr 1975 statt. Da neuere Gasturbinen wesentlich höhere Leistungen erbringen und die vorhandene Wasserreibbremse weiterhin eingesetzt werden sollte, musste eine Nachqualifizierung vorgenommen werden. Das Ziel war die Absicherung auf eine mögliche Sprödbruchgefahr. Zunächst wurde eine Studie zur Prüfbarkeit erstellt. An speziellen Testkörpern wurden im Ultraschallabor der BAM Vorversuche zur Machbarkeit, zur Empfindlichkeitsein-stellung und zur Vorbereitung der Prüfung durchgeführt. Dazu wurden spezielle Gruppenstrahlerprüfköpfe gefertigt und ein an die komplizierte Geometrie der Bremsscheiben angepasster Manipulator gebaut. Ferner wurde, um die Prüfzeiten zu reduzieren, die Software zur Datenerfassung und zur Auswertung angepasst. Im Werk Berlin der Siemens AG wurde in Zusammenarbeit mit der Siemens AG Erlangen eine Ultraschallprüfung mit der Gruppenstahlertechnik der Wasserreibbremse durchgeführt. Überprüft wurde das gesamte Volumen auf axial, radial und tangential beanspruchte Fehler in den Bereichen der Welle und der Bremsscheibe.Die Überprüfung ergab keine relevanten Fehler, so dass die Wasserreibbremse weiterhin eingesetzt werden kann. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2000 CY - Innsbruck, Österreich DA - 2000-05-29 PY - 2000 UR - http://www.ndt.net/abstract/dgzfp00/data/79.htm SN - 3-931381-32-3 VL - 73 IS - 2 SP - 1(?) EP - 7(?) PB - DGZfP CY - Berlin AN - OPUS4-940 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Tscharntke, Dirk A1 - Heckel, Thomas A1 - Boehm, Rainer A1 - Erhard, Anton A1 - Krull, R. A1 - Lützner, J. A1 - Hintze, H. T1 - Development of in-service rail inspection systems using phased arrays PY - 2012 SN - 978-3-87155-608-1 SN - 1618-4513 VL - 4 SP - 182 EP - 187 PB - DVS Media GmbH CY - Düsseldorf ET - English Edition AN - OPUS4-26828 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erhard, Anton A1 - Schenk, Gottfried A1 - Hauser, Th. A1 - Völz, Uwe ED - Roos, E. T1 - Anwendungsmöglichkeiten der Gruppenstrahlertechnik T2 - 25th MPA-seminar CY - Stuttgart, Germany DA - 1999-10-07 KW - Gruppenstrahlertechnik PY - 1999 VL - 206 IS - 2-3 SP - 25.1 EP - 25.10 PB - North-Holland CY - Amsterdam AN - OPUS4-796 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Munikoti, Vijayendra K. A1 - Brekow, Gerhard A1 - Tessaro, Ute A1 - Erhard, Anton T1 - Ultrasonic inspection for transverse defects in dissimilar metal welds N2 - As a part ofthe cooling circuit in many nuclear power installations, dissimilar metals are welded together - for example, weid overlay cladding of austenitic material (either Inconel or 1.4550) on low alloy Steel. These welds are prone to stress corrosion Cracking. In some ofthe nuclear power stations, cracks were detected on the inner surface of the dissimilar weid. These cracks, which have their Orientation perpendicular to the weiding direction, are designated as transverse cracks. The purpose of the present investigation is to develop an ultrasonic testing method for reliable detection ofsuch transverse cracks. Very offen, crack detection and sizing in dissimilar welds with ultrasound can be very difficult due to the following reasons: 1. In a weiding process, high thermal gradients exist between the molten weid pool and the neighbouring colder regions. During the solidification process, grains grow along the direction of heat flow, yielding a textured structure. This results in a microstructure consisting of elongated grains, which causes the anisotropic nature of the weid region. An elastic wave in such an anisotropic medium undergoes beam skewing (i.e. phase and group velocity (Energy flow) directions are no longer coincident). 2. Due to the above mentioned grain structure, elastic properties vary spatially. This amounts to an ultrasonic wave undergoing multiple reflections at grain boundaries. The ray direction gets successively skewed at each grain boundary, resulting in a curved path. In addition to the grain boundaries, there are also interfaces between different parts ofthe dissimilar weid such as parent metal, transition layer, cladding and weid. At these interfaces, reflections and mode conversions occur in addition to scattering at grain boundaries. Altogether, ultrasonic inspection ofdissimilar welds for defect detection and sizing poses major challenges. Presently international research activities are concerned with the development of improved Signal Processing methods and optimizing strategies for qualifying ultrasonic inspection techniques for dissimilar welds. PY - 2012 SN - 978-3-87155-608-1 SN - 1618-4513 VL - 4 SP - 153 EP - 161 PB - DVS Media GmbH CY - Düsseldorf AN - OPUS4-26829 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erhard, Anton T1 - Regulating the Use of New Materials in Containment Systems for Dangerous Goods T2 - MRS Fall Meeting CY - Boston, MA, USA DA - 2008-12-01 PY - 2008 AN - OPUS4-19637 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -