TY - CONF A1 - Erhard, Anton A1 - Völzke, Holger A1 - Droste, Bernhard A1 - Wolff, Dietmar A1 - Wille, Frank T1 - Nuclear power plant waste management strategy in Germany N2 - The shut-down of eight nuclear power plants and the phase out of the nuclear energy genera� tion in Germany, due to a decision of the German government after the Fukushima accident, has rapidly forced the need for transportation and storage of spent nuclear fuel (SNF) from shut-down reactors in this country. In accordance with the present strategy in Germany, which is characterized by searching for appropriate final repository areas, only the dry interim stor� age facilities are available for storage nuclear waste of the decommissioned plants as well as the operating plants. Therefore, the transportation and the storage casks must be available for both types of light water reactors. But for the time being this is the bottleneck. Unfortunately the prognoses are neglecting the fact, that such a high number of casks are needed in a very short space of time. This requires the acceleration of formal activeness in relation to the li� censes but also an increase of the production. In the meanwhile to get this process started, the only possibility is the storage in the pools at the plant site. Anyway, for the time being, this is one of the problems for dismantling the eight plants which have been shut down due to the decision of the Government, which is now fixed in the last amended German Atomic Energy Act dated 24th of February 2012. Starting to dismantle in the radioactive regions of the plants requires empty pools. For emptying the pools of damaged SNF special procedures regarding the transportation and storage are necessary. The transportation of damaged SNF requires special casks or at least special procedures and therefore also a special licenses. This paper describes the challenge for the management in transportation and storage of SNF in Germany after the shut-down of the nuclear power plants by reason of the Fukushima acci� dent. T2 - PATRAM 2013 - 17th International symposium on the packaging and transportation of radioactive materials CY - San Francisco, CA, USA DA - 18.08.2013 PY - 2013 SP - 1 EP - 11 PB - Omnipress AN - OPUS4-30135 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gaal, Mate A1 - Bovtun, Viktor A1 - Stark, Wolfgang A1 - Erhard, Anton A1 - Yakymenko, Y. A1 - Kreutzbruck, Marc T1 - Viscoelastic properties of cellular polypropylene ferroelectrets N2 - Viscoelastic properties of cellular polypropylene ferroelectrets (PP FEs) were studied at low frequencies (0.3–33 Hz) by dynamic mechanical analysis and at high frequencies (250 kHz) by laser Doppler vibrometry. Relaxation behavior of the in-plane Young’s modulus (Y´ 11~1500 MPa at room temperature) was observed and attributed to the viscoelastic response of polypropylene matrix. The out-of-plane Young’s modulus is very small (Y´33≈0.1 MPa) at low frequencies, frequency- and stress-dependent, evidencing nonlinear viscoelastic response of PP FEs. The highfrequency mechanical response of PP FEs is shown to be linear viscoelastic with Y´33≈0.8 MPa. It is described by thickness vibration mode and modeled as a damped harmonic oscillator with one degree of freedom. Frequency dependence of Y*33 in the large dynamic strain regime is described by the broad Cole-Cole relaxation with a mean frequency in kHz range attributed to the Dynamics of the air flow between partially closed air-filled voids in PP FEs. Switching-off the relaxation contribution causes dynamic crossover from the nonlinear viscoelastic regime at low frequencies to the linear viscoelastic regime at high frequencies. In the small strain regime, contribution of the air flow seems to be insignificant and the power-law response, attributed to the mechanics of polypropylene cell walls and closed air voids, dominates in a broad frequency range. Mechanical Relaxation caused by the air flow mechanism takes place in the sound and ultrasound frequency range (10 Hz–1MHz) and, therefore, should be taken into account in ultrasonic applications of the PP FEs deal with strong exciting or receiving signals. KW - Viscoelastic KW - Cellular polypropylene KW - Ferroelectret PY - 2016 DO - https://doi.org/10.1063/1.4944798 SN - 0021-8979 SN - 1089-7550 SN - 1520-8850 VL - 119 SP - Article Number: 125101 PB - AIP Publishing AN - OPUS4-35956 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erhard, Anton T1 - Defect Sizing using Ultrasonic Phased Array Techniques and SAFT T2 - 11th International Conference on NDE in Relation to Structural Integrity for Nuclear and Pressurized Components CY - Jeju Island, South Korea DA - 2015-05-19 PY - 2015 AN - OPUS4-33911 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wüstenberg, Hermann A1 - Erhard, Anton T1 - Anwendung spezieller Ultraschall-Prüfköpfe unter besonderer Beachtung von Kriechwellen PY - 1981 SP - 1 EP - 22 PB - Koninklijk Instituut Van Ingenieurs (KIVI) CY - Twente AN - OPUS4-33958 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Erhard, Anton A1 - Wüstenberg, Hermann A1 - Schulz, Eduard A1 - Möhrle, Walter T1 - The inservice inspection of austenitic pipe welds, with special emphasis on the sizing of near surface defects by acoustic holography T2 - 6th ASM International Conference on NDE in the Nuclear Industry CY - Zurich, Switzerland DA - 1983-11-28 PY - 1985 SN - 0148-7191 SN - 0096-5170 IS - 8310-013 SP - 249 EP - 255 PB - Society of Automotive Engineers CY - Warrendale, Pa. AN - OPUS4-34207 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erhard, Anton A1 - Wüstenberg, Hermann A1 - Schulz, Eduard A1 - Möckel, U. T1 - Ultrasonic flaw detection and sizing methods for cracks in the nozzle corner area at boiling water reactor vessels T2 - 7th International Conference on NDE in the nuclear industry CY - Grenoble, France DA - 1985-01-28 PY - 1985 SP - 55 EP - 58 CY - Grenoble AN - OPUS4-34209 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erhard, Anton A1 - Wüstenberg, Hermann A1 - Schenk, Gottfried A1 - Möhrle, Walter T1 - Calculation and construction of phased array-UT probes T2 - 3rd Japanese-German joint seminar on structural strength and NDE problems in nuclear engineering CY - Stuttgart, Germany DA - 1985-08-29 PY - 1985 SP - 1 EP - 22 AN - OPUS4-34210 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Jaffrey, D. A1 - Wüstenberg, Hermann A1 - Bertus, Norbert A1 - Ludwig, Bernd A1 - Erhard, Anton T1 - Improved detection of near-surface defects with new ultrasonic probes and signal analysis techniques T2 - Fifth international conference on pressure vessel technology CY - San Francisco, CA, USA DA - 1984-09-09 PY - 1984 VL - 2 SP - 693 EP - 702 PB - ASME CY - New York AN - OPUS4-34231 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wüstenberg, Hermann A1 - Erhard, Anton ED - Dorn, L. T1 - Neuere Ultraschallprüfverfahren für die Fehlerklassierung und -analyse and Schweißnähten PY - 1985 SN - 3-88508-962-9 N1 - Serientitel: Kontakt & Studium – Series title: Kontakt & Studium IS - 145 SP - 136 EP - 158 PB - Expert-Verl. CY - Sindelfingen AN - OPUS4-34234 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wüstenberg, Hermann A1 - Ludwig, Bernd A1 - Bertus, Norbert A1 - Erhard, Anton A1 - Jaffrey, D. T1 - Time displacement pictures with multi-mode probes from circumferential welds PY - 1985 SN - 0148-7191 SN - 0096-5170 IS - 8310-014 SP - 173 EP - 180 PB - Society of Automotive Engineers CY - Warrendale, Pa. AN - OPUS4-34238 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schenk, Gottfried A1 - Montag, Hans-Joachim A1 - Wüstenberg, Hermann A1 - Erhard, Anton T1 - Entwicklung und Anwendungsmöglichkeiten eines rechnergestützten Gruppenstrahlerkonzepts für die Ultraschall-Prüfung PY - 1985 SN - 0340-7551 VL - 15 IS - 4 SP - 509 EP - 514 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-34226 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wüstenberg, Hermann A1 - Erhard, Anton T1 - Beitrag neuer Prüfkopftechniken zur Bestimmung der Tiefenausdehnung von oberflächennahen Rissen mit Ultraschall PY - 1982 SN - 0340-7551 VL - 12 IS - 3 SP - 296 EP - 301 CY - Berlin AN - OPUS4-36416 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wüstenberg, Hermann A1 - Erhard, Anton A1 - Montag, Hans-Joachim A1 - Schenk, Gottfried ED - Höller, P. T1 - Measurement of crack depth with ultrasonic methods - Through transmission- and reflection modes N2 - The measurement of crack depth in the near surface area especially on cladded components has seen a lot of approaches which has not always been successful. We have tried therefore to apply redundant methods in reflection and through transmission modes. In a reflection mode focussed sound fields with variable angle (between 38° and 76°) have been applied. Crack tip reflections could be better identified with focussing and angles adapted to the depth. But it remains doubtful not only to detect but also to analyse in a reflection mode cracks with bad orientation or such ones which are compressed or filled by corrosion products therefore we have investigated as a complementary approach through transmission arrangements with focussing and linear phased arrays. The electronic control of an 8-channel system is focussing and changing the angle. The results are demonstrating that a combined reflection and through transmission approach will improve the reliability of cracksizing with US. T2 - New Procedures in Nondestructive Testing - Germany-U.S. Workshop CY - Saarbrücken, Germany DA - 30.08.1982 KW - Crack depth KW - Ultrasonic method KW - Reflection mode KW - Transmission mode PY - 1983 SN - 978-3-662-02365-5 SN - 978-3-662-02363-1 DO - https://doi.org/10.1007/978-3-662-02363-1_20 SP - 213 EP - 228 PB - Springer CY - Berlin AN - OPUS4-62808 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wüstenberg, Hermann A1 - Erhard, Anton A1 - Ludwig, Bernd T1 - Grundlagen der Ultraschallprüfung an plattierten Reaktorkomponenten N2 - Die Ultraschallprüfung an plattierten Reaktorkomponenten erfährt bestimmte Einschränkungen insbesondere durch Schwankungen der Empfindlichkeit, durch Verschlechterung des Signal-Rausch-Verhältnisses und durch Störanzeigen unterschiedlicher Herkunft. Die Entwicklungen der vergangenen Jahre haben Möglichkeiten aufgezeigt, durch die die Ultraschallprüfung an Reaktorkomponenten mit der bei nicht plattierten Komponenten üblichen Nachweisempfindlichkeit möglich geworden ist. Diese Empfindlichkeit wird aber bei plattierten Komponenten erkauft mit einer spürbaren Erhöhung der Zahl von Anzeigen, die zu registrieren sind. Daher muß bei der Prüfung plattierter Komponenten insbesondere auf eine bessere Klassierung der aufgefundenen Anzeigen geachtet werden. In diesem Zusammenhang muß das Instrumentarium für eine Klassierung der Anzeigen verbessert werden, z. B. durch verbesserte Signalauswertung sowie durch Benutzung des Laufzeitverhaltens einer Echoanzeige. Für eine verbesserte Befundanalyse müssen entsprechende Hilfsmittel wie fokussierende Prüfköpfe oder die akustische Holographie zur Verfügung stehen. Die vorliegenden Erfahrungen beim Einsatz der Ultraschallprüfung an plattierten Komponenten auch während der Fertigung zeigen, daß der an sich notwendige, erhöhte Aufwand nur selten zum Tragen kommt, weil die heute verfügbare Basisqualität der Komponenten erheblich verbessert werden konnte und damit die Zahl von registrierpflichtigen Anzeigen ohnehin zurückgegangen ist. T2 - Deusch-Schweizerisches Seminar "Ausgewählte Aspekte der zerstörungsfreien Prüfung von Reaktorkomponenten" CY - Stuttgart, Germany DA - 28.03.1983 KW - Zerstörungsfreie Prüfung KW - Ultraschall-Impulsechoverfahren KW - Plattierung KW - Reaktordruckgefäß PY - 1983 SP - 1 EP - 23 PB - Materialprüfungsanstalt (MPA) CY - Stuttgart AN - OPUS4-62811 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wüstenberg, Hermann A1 - Erhard, Anton T1 - The importance of acoustic line holography in determining flaw size using ultrasonics N2 - The report deals with the principle of acoustic line holography for ultrasonic testing. Its applications, particularly in weld joints are illustrated. It was evident from many practical applications that this technology has a potential for providing Information regarding flaw sizes by ultrasonic testing which is characterized in particular by its adaptability to different situations and, compared with the large number of possible applications, represents a relatively simple instrumental technique. Experience has shown that acoustic line holography is becoming an increasingly serious rival to methods using focussing probes. PY - 1983 SN - 0036-7184 N1 - Es gibt eine parallele Sprachausgabe (deutsch), ein Link befindet sich im Feld zugehöriger Identifikator - There is a parallel language edition (German), a link is in the field related identifier VL - 35 IS - 5 SP - E82 EP - E83 PB - DVS-Media GmbH CY - Düsseldorf AN - OPUS4-62812 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erhard, Anton T1 - Einfluss mechanischer und thermischer Belastungen auf die Werkstoffermüdung T2 - Sicherheitskonferenz "Alterung und Ermüdungsverhalten sowie wiederkehrende Prüfungen von Komponenten der Atomkraftwerke in der Restlaufzeit" CY - Hameln, Deutschland DA - 2014-12-03 PY - 2014 AN - OPUS4-32006 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erhard, Anton T1 - An Overview about NDT in Germany T2 - 11th European Conference on Non-Destructive Testing CY - Prague, Czech Republic DA - 2014-10-06 PY - 2014 AN - OPUS4-32007 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wüstenberg, Hermann A1 - Erhard, Anton A1 - Möller, G. T1 - Erläuterungen zum Einsatz der akustischen Holographie in der zerstörungsfreien Werkstoffprüfung mit Ultraschall T2 - 4. Internationale Konferenz über Zerstörungsfreie Prüfung in der Kerntechnik CY - Lindau, Germany DA - 1981-05-25 PY - 1981 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 8 SP - 1 EP - 13 PB - DGZfP CY - Berlin AN - OPUS4-33334 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Iancu, O.T. A1 - Erhard, Anton A1 - Otremba, Frank A1 - Sklorz, Christian T1 - Consistency between analytical and finite element predictions for safety of cylindrical pressure vessels at higher temperatures N2 - Die Vorhersage der Beanspruchung bei plastischem Versagen von zylindrischen Druckbehältern wird häufig mittels Finite Elemente Berechnungen durchgeführt. Die Berechnung der zulässigen Beanspruchung erfordert ein elastisch-plastisches Werkstoffmodell und die Berücksichtigung von nichtlinearen geometrischen Effekten. Das plastische Versagen verursacht eine gesamte Strukturinstabilität und kann nicht direkt aus der Finite Elemente Analyse bestimmt werden. In dem vorliegenden Beitrag wird die Beanspruchung für plastisches Versagen eines zylindrischen Druckbehälters mittels eines analytischen Verfahrens basierend auf einem linear elastischen ideal-plastischen Materialmodell bestimmt. Wenn Plastizität auftritt, wird zum einen der Werkstoff als inkompressibel und zum anderen der Tensor der plastischen Dehnungen als parallel zum Spannungsabweichungstensor angenommen. In diesem Fall kann die Spannungs-Dehnungs-Beziehung von Henkel angewendet werden, um den Druck zu berechnen, bei dem plastisches Fließen und Versagen eintritt. Die analytischen Ergebnisse werden von den Finite Elemente Berechnungen vollkommen bestätigt. KW - Materials testing KW - FEM KW - Plastic instability KW - Limit load analysis KW - Pressure vessel KW - Analytical solution PY - 2014 SN - 0025-5300 VL - 56 IS - 4 SP - 274 EP - 278 PB - Hanser CY - München AN - OPUS4-30722 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erhard, Anton T1 - Nondestructive Testing and Fracture Mechanics T2 - 5th International CANDU In-Service Inspection Workshop and NDT in Canada 2014 Conference CY - Toronto, Canada DA - 2014-06-16 PY - 2014 AN - OPUS4-31120 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erhard, Anton T1 - Comparison of Pre- and In-service Inspection Techniques in Belgium and Germany against the backdrop of Ultrasonic Indications found at the Reactor Pressure Vessel of Doel-3 T2 - ConaEnd&Iev; 18a Conferència Internacional Sobre Evaluación de Integridad y Extensión de Vida de Equipos Industriales CY - São Paulo, Brazil DA - 2014-08-18 PY - 2014 AN - OPUS4-31121 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erhard, Anton A1 - Dugan, S. A1 - Schuler, X. ED - Bièth, M. T1 - Comparison of pre- and in-service inspection techniques in Belgium and Germany against the backdrop of ultrasonic indications found at the reactor pressure vessel of doel-3 T2 - 10th International conference on NDE in relation of structural integrity for nuclear and pressurized components CY - Cannes, France DA - 2013-10-01 PY - 2014 SN - 978-92-79-36759-5 SN - 978-92-79-36758-8 SN - 1018-5593 SN - 1831-9424 SP - 726 EP - 734 AN - OPUS4-31428 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erhard, Anton A1 - Otremba, Frank T1 - Nondestructive testing and fracture mechanics N2 - Nondestructive Testing (NDT) and fracture mechanics are two different disciplines in applied engineering science. Both areas are very important for the evaluation of the component integrity. Unfortunately the technical understanding in both disciplines is not identically, what lead to misunderstandings. In the present paper, the basic ideas about fracture mechanics and the input parameters coming from the NDT side are explained, concerning the integrity evaluation of the components. The widely used NDT methods are magnetic particle, dye penetrant, electrical eddy currents, radiography and ultrasonics. But not all of these common NDT methods can deliver parameters satisfy the fracture mechanics requirements. The first two can detect only surface-breaking or immediately sub-surface defects. Eddy current can also find defects in deeper sub-surface layers, while radiography and ultrasonics can also find embedded, remote defects. These three methods have furthermore a high potential for defect sizing and are therefore predestined to provide fracture mechanics input parameters. At the example of steam generator tube inspection the interplay of eddy current and fracture mechanics as related to tube integrity will be explained. T2 - 5th International CANDU In-Service inspection workshop and NDT in Canada 2014 conference CY - Toronto, Ontario, Canada DA - 16.06.2014 KW - Eddy current KW - Steam generator tube inspection KW - Component integrity KW - Fracture mechanics PY - 2014 SP - 1 EP - 12 AN - OPUS4-30907 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - BOOK A1 - Erhard, Anton T1 - Verfahren der zerstörungsfreien Materialprüfung - Grundlagen N2 - Dieses Buch ist als Einführung für Ingenieure und Physiker in die klassischen Verfahren der zerstörungsfreien Materialprüfung wie Durchstrahlungsprüfung, Ultraschallprüfung, Eindringprüfung, magnetische Streuflussprüfung (Magnetpulverprüfung), Wirbelstromprüfung und Sichtprüfung gedacht. Aufbauend auf den physikalischen Gesetzmäßigkeiten wird versucht, die grundsätzlichen Überlegungen, die den einzelnen Verfahren eigen sind, aufzuzeigen, damit die Anwendung in der Prüfpraxis nachvollzogen werden kann. Die zerstörungsfreie Werkstoffprüfung gewinnt immer mehr an Bedeutung. Dies ist unter anderem bedingt durch die zunehmenden schädigenden Umwelteinflüsse und die wachsenden Anforderungen an die Sicherheit technischer Anlagen. Durch frühzeitiges Erkennen von Schäden an Bauteilen, Anlagen und technischen Konstruktionen soll die Sicherheit für Mensch und Umwelt erhöht werden. Das Verhindern von Schäden ist eine der zentralen Aufgaben der zerstörungsfreien Werkstoffprüfung. Auf typische Anwendungsbeispiele wird an mehreren Stellen hingewiesen. KW - Durchstrahlungsprüfung KW - Röntgenstrahlung KW - Gammastrahlung KW - Quantenstrahlung KW - Radiographie KW - Ultraschallprüfung KW - Schwingungen KW - Wellen KW - Eindringprüfung KW - Streuflussverfahren KW - Wirbelstromprüfung KW - Sichtprüfung PY - 2014 SN - 978-3-87155-613-5 SP - 1 EP - 392 PB - DVS Media GmbH AN - OPUS4-30908 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erhard, Anton T1 - Defect Sizing using Ultrasonic Phased Array Techniques and SAFT T2 - 11. International Conference on Non Destructive Evaluation CY - Jeje, Süd Korea DA - 2015-05-16 PY - 2015 AN - OPUS4-33772 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erhard, Anton T1 - Entwicklung von ZfP Verfahren für die Fehlergrößenbestimmung T2 - 200. Sitzung Arbeitskreis Stuttgart CY - Stuttgart, Germany DA - 2015-06-25 PY - 2015 AN - OPUS4-33773 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erhard, Anton A1 - Wüstenberg, Hermann T1 - Reliability and redundancy in ultrasonic flaw sizing methods T2 - International Conference on Nondestructive Evaluation in the Nuclear Industry CY - Salt Lake City, UT, USA DA - 1980-02-11 PY - 1981 SN - 0-87170-109-X N1 - Serientitel: Materials/metalworking technology series – Series title: Materials/metalworking technology series VL - 8 SP - 1 EP - 14 CY - Metals Park, Ohio AN - OPUS4-33307 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erhard, Anton A1 - Wüstenberg, Hermann T1 - Der Einsatz der akustischen Holographie an plattierten Bauteilen zur Fehlergrößenbestimmung T2 - 2. Europäische Tagung für Zerstörungsfreie Prüfung CY - Wien DA - 1981-09-14 PY - 1981 SP - 117 EP - 119 CY - Wien AN - OPUS4-33308 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erhard, Anton A1 - Wüstenberg, Hermann T1 - Fehlergrößenbestimmung oberflächennaher Fehler mit Hilfe der akustischen Holographie T2 - 4. Internationale Konferenz über Zerstörungsfreie Prüfung in der Kerntechnik CY - Lindau, Germany DA - 1981-05-25 PY - 1981 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 8 SP - 101 EP - 108 PB - DGZfP CY - Berlin AN - OPUS4-33444 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wüstenberg, Hermann A1 - Erhard, Anton T1 - Zur Bedeutung der akustischen Linienholografie für die Fehlergrößenbestimmung mit Ultraschall N2 - Behandelt wird das Prinzip der akustischen Linienholografie für die Prüfung mit Ultraschall. Anwendungsmöglichkeiten vor allem an Schweißverbindungen werden dargestellt. Bei vielen Einsätzen in der Praxis hat sich gezeigt, daß diese Technologie ein Potential zur Angabe von Fehlergrößen bei der Ultraschallprüfung besitzt, das sich vor allem durch die Anpassungsfähigkeit an unterschiedliche Situationen auszeichnet und im Vergleich mit der Vielzahl der möglichen Anwendungen eine verhältnismäßig einfache Gerätetechnik aufweist. Die Erfahrungen lassen erkennen, daß die akustische Linienholografie ein ernstzunehmender Konkurrent für den Einsatz von fokussierenden Prüfköpfen darstellt. PY - 1983 SN - 0036-7184 N1 - Es gibt eine parallele Sprachausgabe (englisch), ein Link befindet sich im Feld zugehöriger Identifikator - There is a parallel language edition (English), a link is in the field related identifier VL - 35 IS - 5 SP - 224 EP - 227 PB - DVS-Media GmbH CY - Düsseldorf AN - OPUS4-40625 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wüstenberg, Hermann A1 - Erhard, Anton T1 - Matching of Ultrasonic Flaw Sizing Methods to the Defect Type and Location N2 - During the last ten years many specialized ultrasonic flaw sizing methods have been reported in the literature and used in practical applications . Most of the proposed approaches are restricted to the special types of defects investigated by the respective authors. Some are specifically for throughsurface cracks, others are able to analyze the size of planar, internal defects with smooth surfaces, and other methods can only be applied if the expected defect sizes are smaller than or significantly larger than the wave length. It is obvious that defect sizing with ultrasound can nowadays be based on a lot of different Instruments, which currently must be selected for a given problem. T2 - Deutsch-Japanisches Seminar CY - Tokyo, Japan DA - 21.08.1983 PY - 1983 VL - 2 AN - OPUS4-40854 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wüstenberg, Hermann A1 - Schulz, Eduard A1 - Erhard, Anton A1 - Sonnenberg, G. A1 - Loening, P. T1 - Ultrasonic inservice inspection of shrinkage cracks at turbine rotor discs N2 - During the revision of turbines in power plants,shrinkage cracks in the rotor discs have been detected, whieh are generated sometimes in a keyway area if present or generally in some specially loaded areas of the shrinkage /l, 2/. The crack generation produces ultrasonically reflecting surfaces oriented parallel to the turbine shaft axes and parallel to the turbine diameter. For the detection of such cracks during an inservice inspection a manual or in most cases a mechanical scanning seems to be necessary. Some development and results are reported in /l, 2/. In this contribution we will describe some Solutions we started to develop together with the KWU-Berlin for a special geometric Situation. We will restrict the report on the ultrasonic Problems to solve. T2 - 5. International Conference on NDE in the Nuclear Industry CY - San Diego, CA, USA DA - 10.05.1982 PY - 1983 SP - 373 EP - 378 PB - American Society for Metals CY - Metals Park, Ohio AN - OPUS4-41794 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Erhard, Anton A1 - Wüstenberg, Hermann A1 - Schulz, Eduard A1 - Mundry, Eberhard T1 - Anwendungen der longitudinalen Kriechwelle in der zerstörungsfreien Prüfung mit Ultraschall und Erfahrungen beim Einsatz von Kriechwellenprüfköpfen PY - 1982 SN - 0025-5300 VL - 24 IS - 2 SP - 43 EP - 48 PB - Carl Hanser Verlag CY - München AN - OPUS4-18748 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Erhard, Anton A1 - Wüstenberg, Hermann A1 - Schulz, Eduard A1 - Mundry, Eberhard A1 - Ludwig, Bernd T1 - Kriechwellen in der Ultraschallprüfung - Physikalische Grundlagen - Anwendung bei Schweißkonstruktionen N2 - Berichtet wird über die Entwicklung von mit longitudinalen Kopfwellen arbeitenden Ultraschallprüfköpfen (Kriechwellenprüfköpfen). Eingegangen wird auf ihre Schallfelder und - anhand von Beispielen aus dem Bereich der Schweißtechnik — ihre Anwendungsmöglichkeiten. Kriechwellenprüfköpfe weisen erhöhte Empfindlichkeit für den Nachweis oberflächennaher Risse auf. Sie sind nicht durch übliche Störungen an der Oberfläche wie Flüssigkeitstropfen oder Schweißspritzer, die akustische Belastungen darstellen, beeinflußbar und somit frei von Störanzeigen. PY - 1983 SN - 0036-7184 VL - 35 IS - 5 SP - 220 EP - 223 PB - Verl. für Schweißen u. Verwandte Verfahren, DVS-Verl. CY - Düsseldorf AN - OPUS4-18749 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Szafarska, E. A1 - Mohr, F. A1 - Fischer, E. A1 - Erhard, Anton T1 - Phased array: well qualified for core shroud inspection PY - 1997 SN - 0029-5507 VL - 1/9 SP - 24 EP - 25 PB - Business Press Internat. CY - Sutton AN - OPUS4-18770 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wüstenberg, Hermann A1 - Erhard, Anton A1 - Bertus, Norbert A1 - Hintze, H. A1 - Schüssler, M. T1 - Recent advances in ultrasonic inspection of railway axles and wheels PY - 2001 SN - 0007-1137 VL - 43 IS - 3 SP - 180 EP - 182 PB - British Institute of Non-Destructive Testing CY - Northampton AN - OPUS4-18771 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Egelkraut, A1 - Erhard, Anton T1 - Tagungsbericht "Zweite Tagung der Chinesischen Gesellschaft für Zerstörungsfreie Prüfung" in Beidaihe PY - 1981 SN - 0025-5300 VL - 23 IS - 10 SP - 351 EP - 353 PB - Carl Hanser Verlag CY - München AN - OPUS4-18772 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Erhard, Anton A1 - Fuchs, H. A1 - Möhrle, Walter A1 - Matschol, P.I. T1 - Characterization of sound field parameters of ultrasonic probes using a computer-controlled measurement and data acquisition system PY - 1985 SN - 0308-9126 VL - 18 IS - 6 SP - 359 EP - 362 PB - Elsevier CY - Amsterdam AN - OPUS4-18760 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kutzner, Jürgen A1 - Wüstenberg, Hermann A1 - Erhard, Anton T1 - Mehrfrequenzholographie und SAFT-Verfahren in der Ultraschallprüfung PY - 1986 SN - 0025-5300 VL - 28 IS - 5 SP - 142 EP - 144 PB - Carl Hanser Verlag CY - München AN - OPUS4-18761 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Erhard, Anton A1 - Wüstenberg, Hermann A1 - Schenk, Gottfried A1 - Möhrle, Walter T1 - Calculation and construction of phased array-UT probes PY - 1986 SN - 0029-5493 SN - 1872-759X VL - 94 IS - 3 SP - 375 EP - 385 PB - North-Holland Publ. Co. CY - Amsterdam AN - OPUS4-18762 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kutzner, Jürgen A1 - Erhard, Anton A1 - Wüstenberg, Hermann T1 - Mehrfrequente Kreisholographie in der Ultraschallprüfung PY - 1986 SN - 0025-5300 VL - 28 IS - 7/8 PB - Carl Hanser Verlag CY - München AN - OPUS4-18763 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wüstenberg, Hermann A1 - Erhard, Anton A1 - Schenk, Gottfried A1 - Montag, Hans-Joachim T1 - Anwendung der Ultraschalltomographie an Turbinen und Generatorwellen T2 - 12. MPA-Seminar CY - Stuttgart, Deutschland DA - 1986-10-16 PY - 1987 SN - 0025-5300 VL - 29 IS - 10 SP - 297 EP - 302 PB - Carl Hanser Verlag CY - München AN - OPUS4-18764 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Brekow, Gerhard A1 - Wüstenberg, Hermann A1 - Erhard, Anton A1 - Möhrle, Walter T1 - Gruppenstrahlerprüfköpfe für die Ultraschallprüfung PY - 1989 SN - 0025-5300 VL - 31 IS - 5 SP - 137 EP - 142 PB - Carl Hanser Verlag CY - München AN - OPUS4-18765 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Brekow, Gerhard A1 - Wüstenberg, Hermann A1 - Erhard, Anton A1 - Montag, Hans-Joachim A1 - Szafarska, E. A1 - Hein, E. T1 - Signalverarbeitung und Ergebnisdarstellung mit Ultraschall-Gruppenstrahlerprüfköpfen PY - 1989 SN - 0025-5300 VL - 31 IS - 10 SP - 311 EP - 314 PB - Carl Hanser Verlag CY - München AN - OPUS4-18766 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wüstenberg, Hermann A1 - Erhard, Anton A1 - Brekow, Gerhard T1 - Evaluation of different probe concepts of the inspection of claddings N2 - The comparison of probes for the inspection of cladding shows a remarkable fact: depending on the reflectors used, a different performance characterization of the probe must be expected. It seems important for performance demonstration trials - especially those including the underclad area - to use reflector types as close as possible to the real cracks to be detected. For different detection approaches, reflectors representing underclad cracks should have a reduced diffraction at the crack tip areas in order to check their potential to detect the indication based on surface reflections of the ultrasonic waves. PY - 1996 SN - 0025-5327 VL - 54 IS - 10 SP - 1077 EP - 1086 PB - Society for Nondestructive Testing CY - Columbus, Ohio AN - OPUS4-18767 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Erhard, Anton A1 - Thomas, Hans-Martin T1 - Prüfung der Plattierung mit Impuls-Wirbelstrom- und Ultraschallverfahren PY - 1996 SN - 0025-5300 VL - 38 IS - 11-12 SP - 474 EP - 478 PB - Carl Hanser Verlag CY - München AN - OPUS4-18768 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hauser, T. A1 - Schenk, Gottfried A1 - Bertus, Norbert A1 - Erhard, Anton T1 - Universelles digitales Prüfgerät für die ZfP mit Ultraschall und Impulswirbelstrom PY - 1996 SN - 0025-5300 VL - 38 IS - 7-8 SP - 302 EP - 304 PB - Carl Hanser Verlag CY - München AN - OPUS4-18769 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wüstenberg, Hermann A1 - Erhard, Anton T1 - Zur Bedeutung der Akustischen Linienholographie für die Fehlergrößenbestimmung mit Ultraschall PY - 1983 SN - 0036-7184 VL - 35 IS - 5 SP - 224 EP - 227 PB - Verl. für Schweißen u. Verwandte Verfahren, DVS-Verl. CY - Düsseldorf AN - OPUS4-18750 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Erhard, Anton A1 - Wüstenberg, Hermann A1 - Schulz, Eduard A1 - Mundry, Eberhard A1 - Ludwig, Bernd T1 - Les ondes rampantes dans le controle par ultrasons Principes physiques et application au controle des assemblages soudes PY - 1984 SN - 0033-5142 SN - 0373-8809 VL - 127 SP - 55 EP - 60 CY - Paris, France AN - OPUS4-18751 LA - fra AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Erhard, Anton A1 - Schulz, Eduard A1 - Möhrle, Walter A1 - Wüstenberg, Hermann T1 - Konzept für die betriebliche Überwachung der Schweißnähte an druckführenden austenitischen Rohrleitungen mit Ultraschall PY - 1984 SN - 0036-7184 VL - 36 IS - 7 SP - 315 EP - 319 PB - Verl. für Schweißen u. Verwandte Verfahren, DVS-Verl. CY - Düsseldorf AN - OPUS4-18752 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -