TY - CONF A1 - Erhard, Anton A1 - Bäßler, Ralph A1 - Weltschev, Margit T1 - Regulating the use of new materials in containment systems for dangerous goods N2 - Transportation of dangerous goods are worldwide regulated in the rules or standards e.g. in the recommendations on the Transport of Dangerous Goods of the United Nations, in the Accord Européen Relatif au Transport International des Marchandises Dangereuses par Route (ADR) etc. Addi-tional to these international regulations also national regulations and stan-dards e.g. Gefahrgutverordnung Straße und Eisenbahn (GGVSE) in Ger-many are bases for the transport of hazardous materials. For the material properties of tanks in the “BAM-List – Requirements for Tanks for the Transport of Dangerous Goods” specifications for the sub-stance prototype approval for tank materials are listed. Further compati-bility evaluations of selected metallic material groups as well as of poly-meric gasket and lining materials under the influence of dangerous goods are published in the List. There are a large number of highly corrosive dangerous goods listed, in which conventional steels are not resistant. Chemical companies, transportation providers and tank producers need tanks made of corrosion-resistant materials (corrosion retardant materi-als) in order to protect the tank shell. The application of high-alloyed stainless steels and nickel alloys as there are alloy 926 (1.4529; X1NiCrMoCuN25-20-7), alloy 31 (1.4562;X1NiCrMoCu31-27-7) and Nickel-Chromium-Molybdenum Alloy 59 (2.4605; NiCr23Mo16Al) is an al-ternative solution compared with the lining of the tanks with a polymeric material. Due to the limited number of corrosion test results with welded test sam-ples of these high-alloyed materials under the influence of corrosive dan-gerous goods BAM, Institute for Corrosion Protection (IKS) Dresden and ThyssenKrupp VDM have been performing a comprehensive test program since 2002. The program comprised corrosion resistance evaluations of the three high-alloyed materials exposed to substances representing cor-rosive dangerous goods such as inorganic halogenides, organic acidic halogenides, sulfonic acids and nitrating acids. T2 - MRS Fall Meeting 2008 - Symposium SS -Selecting and Qualifying New Materials for Use in Regulated Industries CY - Boston, MA, USA DA - 2008-12-01 KW - Korrosionsbeständigkeit KW - Superaustenite KW - Nickellegierung KW - Gefahrguttransport PY - 2008 U6 - https://doi.org/10.1557/PROC-1151-SS01-02 VL - 1151E IS - Paper #: 1151-SS01-02 SP - 1 EP - 8(?) CY - Warrendale, PA, USA AN - OPUS4-19610 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -