TY - CONF A1 - Geburtig, Anja T1 - Quantitative Auswertemöglichkeiten bei der spektralen Bestrahlung – Berechnung des Wirkungsspektrums N2 - Für die Bewertung des Wellenlängeneinflusses auf die Alterungsvorgänge bei der Bestrahlung UV- oder lichtempfindlicher Materialien kann die Methode der spektralen Bestrahlung angewendet werden. Im Prinzip wird dabei das linear dispergierte Spektrum einer Strahlenquelle mit kontinuierlichem Spektrum (z.B. Xe-Lampe) auf eine Probenoberfläche abgebildet, so dass Ort einer Materialänderung und Wellenlänge der Bestrahlung einander zugeordnet werden können. Nachfolgende lokal-auflösende Analysemethoden ermitteln eine Eigenschaftsänderung an einem spezifischen Ort der Probe, aus dem sich dann die Bestrahlungswellenlänge ergibt. Der verwendete Aufbau wird beschrieben. Es wird an einem ausgewählten Beispiel gezeigt, wie durch geeignete Anbindung eines Messsystems zur Bestimmung der spektralen Bestrahlungsstärke und ortsaufgelöste Messungen der Eigenschaftsänderungen eine quantitative Auswertung realisiert werden kann. Der Einfluss nichtlinearer Alterungsverläufe wird diskutiert. Grenzen der Methode werden aufgezeigt und Erweiterungsmöglichkeiten dargestellt. T2 - 46. Jahrestagung der GUS CY - Stutensee-Blankenloch, Germany DA - 22.03.2017 KW - UV-Bestrahlung PY - 2017 AN - OPUS4-42577 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - BOOK A1 - Geburtig, Anja A1 - Manier, G. A1 - Cäsar, J. A1 - Herlyn, J. A1 - Hülsmann, Ph. A1 - Köhl, M. A1 - Reichert, Th. A1 - Ruoss, H. A1 - Rüther, N. A1 - Schönlein, A. T1 - Wasser und Materialeigenschaften N2 - In der Gesellschaft für Umweltsimulation GUS e.V. erarbeiten Fachleute aus Wissenschaft und Industrie in freiwilliger Selbstverantwortung Leitfäden und Bücher zur, Umweltsimulation und zur Wirkungssimulation von Umwelteinflüssen. Diese beschreiben den Stand der Technik bzw. Stand der Wissenschaft und dienen als Anleitung für Umweltingenieure und Personen, die sich in die Arbeitsgebiete Produktqualifikation und Umweltsimulation einarbeiten und einiesen wollen. Folgende Themenschwerpunkte werden in diesem Leitfaden behandelt: Wasser und seine Eigenschaften, Phasenübergänge, Transportvorgänge, Änderung von Materialeigenschaften durch Wasser, Messmethoden. KW - Wasser KW - Materialien PY - 2019 SN - 978-3-9818507-4-1 N1 - Belegexemplar liegt bei Frau Geburtig. SP - 1 EP - 445 PB - Stober GmbH CY - Eggenstein AN - OPUS4-48325 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wachtendorf, Volker A1 - Geburtig, Anja T1 - Veränderung der Kratzbeständigkeit und der Reflow-Fähigkeit von Automobil-Klarlacken durch Bewitterung T2 - DFO Qualitätstage 2005, "Moderne Verfahren zur Oberflächencharakterisierung" der Deutschen Forschungsgesellschaft für Oberflächenbehandlung e. V. CY - Berlin, Germany DA - 2005-10-25 PY - 2005 AN - OPUS4-12505 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Der Einfluss von Feuchte und Nässe bei der Bewitterung T2 - 36. Jahrestagung der Gesellschaft für Umweltsimulation (GUS) CY - Karlsruhe, Germany DA - 2007-03-14 PY - 2007 AN - OPUS4-14651 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Grenzflächenklima an bestrahlten Oberflächen, Strahlungsmessung T2 - "Bewitterung von Kunststoffen und Lacken", Seminar der Technischen Akademie Wuppertal CY - Altdorf, Germany DA - 2007-05-10 PY - 2007 AN - OPUS4-14813 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Spectral sensivity of polymeric degradation - spectral efficiency of stabilizers T2 - European Coating Conference CY - Nuremberg, Germany DA - 2007-05-07 PY - 2007 AN - OPUS4-14812 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Zum (UV-)Strahlenklima der Erde T2 - "Bewitterung von Kunststoffen und Lacken", Seminar der Technischen Akademie Wuppertal CY - Altdorf, Germany DA - 2007-05-10 PY - 2007 AN - OPUS4-14814 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Improved evaluation of activation spectra determined by the filter technique T2 - 3rd European Weathering Symposium CY - Kraków, Poland DA - 2007-09-12 PY - 2007 AN - OPUS4-15906 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Accelerated Weathering Test for Plastics and Coatings that are exposed to Acidic Precipitation T2 - 7th International Symposium on Weatherability CY - Yokohama, Japan DA - 2008-10-23 PY - 2008 AN - OPUS4-18909 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Aussagekraft von Korrelationskoeffizienten T2 - 38. Jahrestagung der GUS CY - Stutensee, Germany DA - 2009-03-18 PY - 2009 AN - OPUS4-19151 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Spektrale Empfindlichkeit und Aktivierungsspektren von Polymeren T2 - Seminar Technische Akademie Wuppertal CY - Altdorf, Germany DA - 2009-04-02 PY - 2009 AN - OPUS4-19652 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Grenzflächenklimate an bestrahlten Oberflächen, Messung der Oberflächentemperatur T2 - Seminar Technische Akademie Wuppertal CY - Altdorf, Germany DA - 2009-04-02 PY - 2009 AN - OPUS4-19673 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Genormte Prüfverfahren T2 - Seminar Technische Akademie Wuppertal CY - Altdorf, Germany DA - 2009-04-02 PY - 2009 AN - OPUS4-19672 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wachtendorf, Volker A1 - Geburtig, Anja T1 - Alterungsvorgänge durch Bewitterung bei Beschichtungen und deren Untersuchung und Prüfung T2 - 42. Fortbildungskurs SAH - Holzoberflächen in der Fassadengestaltung CY - Weinfelden, Schweiz DA - 2010-10-26 KW - Bewitterung KW - Alterung KW - Holz PY - 2010 SN - 978-3-906703-26-8 SP - 29 EP - 38 CY - Zürich, Schweiz AN - OPUS4-22601 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Polypropylene Life Time Estimation by Developing Dose Response Functions with Respect to Irradiation and Temperature - ViPQuali Project T2 - 8th International Symposium on Weatherability CY - Tokyo, Japan DA - 2010-10-14 PY - 2010 AN - OPUS4-22142 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wachtendorf, Volker A1 - Geburtig, Anja T1 - Chemiluminescence for the early detection of weathering effects of coatings - Part II: Experimental set-up and examination KW - Chemiluminescence KW - Weathering KW - Polymer KW - Oxidation PY - 2010 SN - 1547-0083 VL - 7 IS - 5 SP - 38 EP - 44 PB - Federation of Societies for Coatings Technology CY - Blue Bell, Pa. AN - OPUS4-21494 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Training Course "Effects of Moisture in the Course of Weathering" T2 - 4th European weathering symposium CY - Budapest, Hungary DA - 2009-09-16 PY - 2009 AN - OPUS4-20639 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Alterungsvorgänge bei Kunststoffbehältern T2 - BAM-AK Prüfstellen CY - Berlin, Germany DA - 2010-09-22 PY - 2010 AN - OPUS4-22143 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - PP Numerical Photoageing Simulation by Dose Response Functions with Respect to Irradiation and Temperature - ViPQuali Project T2 - Service Life Prediction of Polymeric Materials: Vision for the Future CY - Monterey, CA, USA DA - 2013-03-03 PY - 2013 AN - OPUS4-28355 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Geburtig, Anja A1 - Wachtendorf, Volker A1 - Trubiroha, P. A1 - Zäh, M. A1 - Schönlein, A. A1 - Müller, A. A1 - Vatahska, T. A1 - Manier, G. A1 - Reichert, T. ED - White, C. C. ED - Martin, J. ED - Chapin, J.T. T1 - Polypropylene numerical photoageing simulation by dose-response functions with respect to irradiation and temperature: vipquali project N2 - The aim of the joint project ViPQuali (Virtual Product Qualification) was to describe a component’s ageing behaviour in a given environment, by numerical simulation. Having chosen polypropylene (PP) as the material, which does not show sensitivity to moisture, the relevant weathering parameters of the dose–response functions could be limited to spectral irradiance and temperature. In artificial irradiation tests, for PP plates of varied stabiliser content, spectral sensitivity as well as temperature dependence of irradiation-caused crack formation was quantified. For that purpose, samples were exposed both to artificial weathering tests at various constant temperatures and to spectrally resolved irradiation. The temperature dependence could be modelled by an Arrhenius fit. For fitting the spectral sensitivity, a plateau function was chosen. Subsequently, the stabiliser content was parameterised and extrapolated. The formed dose–response functions were incorporated into a Computational Fluid Dynamics (CFD) software program, simulating the environment of a sample within a Phoenix-exposed IP/DP (Instrument Panel/Door Panel box) box, based on sun position and weather conditions, including radiation interactions. Observed local effects as well as the general ageing advance of PP hats are compared with respect to simulation and experiment. Resulting from this project, for this most simple example of PP of varied stabiliser content, the time to failure can be estimated for each weathering exposure environment with known time-resolved irradiance and temperature conditions. PY - 2015 SN - 978-3-319-06033-0 SN - 978-3-319-06034-7 DO - https://doi.org/10.1007/978-3-319-06034-7_14 SP - Chapter 14, 215 EP - 229 PB - Springer AN - OPUS4-32062 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Trubiroha, P. A1 - Geburtig, Anja A1 - Wachtendorf, Volker ED - Reichert, T. T1 - Surface temperatures of irradiated test specimens - decisive physical quantities and a largely unsolved problem N2 - Temperature is an important parameter in weathering tests. In many (photo-)chemical degradation processes a Variation of the specimen temperature by A t = + 1 °C can cause a Variation of AP(property change) by ± 8%. Since the early eighties it is well known that some types of black panel thermometers can show temperatures that are far below the maximum surface temperature of a black specimen. Although, there were precise requirements for the black coating of the BPT, a replacement by a white coating - depending on the design of the BPT - did not really change the temperature shown by the thermometer. There was no correlation between the BPT and the specimen surface temperature. In Europe and later at ISO the so-called black- and white-standard thermometers BST/WST were introduced. Now, there are BST and WST (ISO) and there are thermally uninsulated and insulated BPT and WPT (ASTM), partly for artificial or for outdoor exposure. And there are other adventurous procedures to determine surface temperatures. The different types of thermometers and different procedures will be discussed and it will be shown that there is no procedure which establishes a correlation between outdoor surface temperatures and surface temperatures in artificial exposure tests. T2 - 6th European weathering symposium Natural and artificial ageing of polymers CY - Bratislava, Slovak Republic DA - 11.09.2013 PY - 2013 SN - 978-3-9813136-8-0 N1 - Serientitel: CEEES Publication – Series title: CEEES Publication IS - 16 SP - 185 EP - 194 AN - OPUS4-31292 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Trubiroha, P. A1 - Geburtig, Anja A1 - Wachtendorf, Volker ED - Reichert, T. T1 - On the yet unsolved problem of the determination of precise surface temperatures of specimens exposed to natural and artificial weathering N2 - The surface temperature of test specimens exposed to natural and artificial solar radiation are roughly ascertained with black standard thermometers BST and white standard thermometers WST. For the calibration of these thermometers a new European Standard prEN 16465 was published in 2015, describing the well-known contact method and a new contactless method with a pyrometer. It can be confirmed that the temperature calibrations according to the two methods provide different calibration results which are not interchangeable (which is already stated in the scope of this standard). The described contactless method to determine the surface temperature 'under radiation load' results in clearly too high temperatures. This paper tries to highlighting the reasons. T2 - 7th European weathering symposium - Natural and artificial ageing of polymers CY - Naples, Italy DA - 16.09.2015 PY - 2015 SN - 978-3-9816286-6-1 N1 - Serientitel: CEEES Publication – Series title: CEEES Publication IS - 17 SP - 23 EP - 36 AN - OPUS4-34351 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - A new weathering device for plastic containers with parallel impact of dangerous liquids N2 - For plastic packaging, both weathering and Chemical exposure are well known, slow-going damaging scenarios, which themselves are sufficiently covered in relevant transport regulations, but treated there separately. In previous work, it has been shown that both can act synergistically, resulting in leakage failure after only six month outdoor exposure in Berlin/Germany. A new weathering device is presented which enables combined exposure of whole components under controlled laboratory conditions. This device allows exposure of an up to 60 litres Container which is filled with dangerous liquid. By using a collecting drip pan and an extractor hood, safety is guaranteed, also in case of leakage failure. Irradiance homogeneity is realized by rotating the Container between two opposed lamp fields consisting of vertically arranged UV fluorescent lamps. Using UVA 340nm lamps with spectral emission mainly between 290 and 380 nm, the short wave ränge of global solar radiation is simulated very precisely. UV irradiance is constantly 60 W/m2, thus it is a bit higher than maximum global solar radiation in the considered UV ränge. Radiation heating is knowingly excluded, avoiding heat production that potentially could be critical for included dangerous liquids. Adjusting constant temperature of 40 °C, chosen conditions aim at worst case outdoor conditions, for uncolored Containers. T2 - 27th IAPRI Symposium on packaging CY - Valencia, Spain DA - 08.06.2015 KW - Weathering exposure KW - Chemical exposure KW - Plastic packaging PY - 2015 SN - 978-84-943398-4-4 SP - 1 EP - 5 AN - OPUS4-33488 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Surface Temperatures of Irradiated Test Specimens - Decisive Physical Quantities and a Largely Unsolved Problem T2 - 6th European Weathering Symposium EWS CY - Bratislava, Slovakia DA - 2013-09-11 PY - 2013 AN - OPUS4-31044 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - A New Weathering Device for Plastic Containers with Parallel impact of Dangerous Liquids T2 - 27th IAPRI Symposium on Packaging CY - Valencia, Spanien DA - 2015-06-06 PY - 2015 AN - OPUS4-33436 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Messung der effektiven UV-Bestrahlung bei der Bewitterung von Polymeren N2 - Bei der Bestrahlung und Bewitterung von polymeren Werkstoffen wird die Degradation durch eine Absorption von Strahlung initiiert und meistens durch weitere Klimagrößen, wie z.B. Wärme, Feuchte und atmosphärische Gase beeinflusst. Die Messung einer effektiven Bestrahlungsstärke und ihre zeitliche Integration sind deshalb von großer Bedeutung. Photochemische Prozesse werden beim Sehen oder allgemeiner bei Farbstoffen schon durch sichtbare (VIS) Strahlung, dagegen bei der Erythembildung der Haut und der Photodegradation von Polymeren erst durch die energiereicheren Photonen der ultravioletten (UV) Strahlung initiiert. Die spektrale Empfindlichkeit des Auges und die Erythembildung sind im VIS- bzw. UV-Bereich sehr stark wellenlängenabhängig, was durch die Angabe der mit der spektralen Hellempfindlichkeit V() des Auges bewerteten VIS-Strahlung in Lux (lx) bzw. die mit der Erythem-Wirkfunktion bewertete UV Strahlung als dimensionsloser UV-Index berücksichtigt wird. Spektrale Empfindlichkeiten. Die Photodegradation von Polymeren ist im UV-Bereich ebenfalls stark wellenlängenab-hängig, was bisher nicht berücksichtigt wurde. Seit Mitte der 70er Jahre, als die lx- bzw lxh- Messung bei der Strahlungsbeanspruchung langsam durch die Ermittlung der radiometrischen UV-Bestrahlungsstärke bzw. der UV-Bestrahlung im gesamten UV-Bereich abgelöst wurde, gab es hier bei der Bewitterungsprüfung keine weiteren Fortschritte auf dem Gebiet der Charakterisierung der Strahlungsbeanspruchung im UV-Bereich. Seit Jahren liegen zahlreiche Ergebnisse über die spektrale Empfindlichkeit von Photo-degradationsprozessen vor, die zeigen, dass die spektrale Empfindlichkeit im Bereich der Globalstrahlung bei ca. 300 nm, am größten ist und im langwelligen UV-Bereich bei ca. 400 nm gegen Null geht. Die Messungen der radiometrischen Größen UV-Gesamt-bestrahlungsstärke und UV-Gesamtbestrahlung erfasst deshalb über weite Wellen-längenbereiche Strahlungsanteile, die für die Photodegradation bedeutungslos sind und mittelt über potenziell bedeutsame Änderungen im kurzwelligen UV-Bereich hinweg. Es wird das Konzept eines neuen UV-Radiometers vorgestellt, dessen spektrale Empfindlichkeit einer mittleren spektralen Empfindlichkeit der Photodegradation von Polymeren entspricht. Die effektive UV-Bestrahlungsstärke und UV-Bestrahlung kann dadurch wesentlich genauer erfasst werden. T2 - 48. Jahrestagung der GUS 2019 CY - Stutensee, Germany DA - 27.03.2019 KW - UV-Bestrahlungsstärke PY - 2019 AN - OPUS4-49712 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wachtendorf, Volker A1 - Geburtig, Anja T1 - Chancen und Grenzen der Verkürzung von Bewitterungstests durch empfindliche Chemilumineszenz-Detektion N2 - Eine Verkürzung der Dauer von Bewitterungsversuchen kann durch eine empfindlichere Detektion der Bewitterungseffekte erreicht werden als sie konventionell benützt wird. Eine solche besonders empfindliche Detektionsmethode stellt die Chemilumineszenz dar. Die Verkürzung durch empfindliche Detektion muss jedoch gleichzeitig der Bedingung genügen, ausreichend gute Rangkorrelation zu Bewitterungseffekten unter Anwendungsbedingungen zu zeigen. In diesem Spannungsfeld sollen die Möglichkeiten der Chemiluminiszenz-Detektion beleuchtet werden. T2 - DFO Qualitätstage 2008 CY - Fürth, Deutschland DA - 2008-10-07 KW - Chemilumineszenz KW - Bewitterung KW - Verkürzung KW - empfindlicher Nachweis PY - 2008 SN - 978-3-89943-072-1 SP - 105 EP - 120 PB - DFO CY - Fürth AN - OPUS4-18328 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wachtendorf, Volker A1 - Geburtig, Anja ED - Ziegahn, K.-F. T1 - Zusammenhang von molekularen Alterungsvorgängen und beobachtbaren Eigenschaftsänderungen bei der Bewitterung von Polymeren T2 - 39. Jahrestagung der GUS 2010 - Umweltflüsse erfassen, simulieren, bewerten CY - Stutensee, Deutschland DA - 2010-03-17 KW - Bewitterung KW - Alterung KW - Eigenschaftsänderung KW - Korrelation PY - 2010 SN - 978-3-9813136-0-4 SP - 45 EP - 55 PB - DWS Werbeagentur und Verlag GmbH CY - Pfinztal AN - OPUS4-21047 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wachtendorf, Volker A1 - Geburtig, Anja T1 - Untersuchung der Veränderung der Kratzfestigkeit und Reflow-Fähigkeit von Karosserie-Klarlacken als Folge der Auslagerung in Jacksonville und nachgestellter Laborbewitterung T2 - DFO Qualitätstage 2005 - Moderne Verfahren zur Oberflächencharakterisierung CY - Berlin, Deutschland DA - 2005-10-25 KW - Bewitterung KW - Kratzfestigkeit KW - Kratzbeständigkeit KW - Reflow KW - Weißlichtinterferenz KW - Rauhigkeit PY - 2005 SN - 3-89943-062-X SP - 88 EP - 102 PB - DFO CY - Düsseldorf AN - OPUS4-11216 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Lebensdauerabschätzung für Polypropylen durch Dosis-Wirkungsfunktionen bezüglich Bestrahlungsstärke und Temperatur (ViPQuali-Projekt) T2 - 40. Jahrestagung der GUS CY - Stutensee, Germany DA - 2011-03-28 PY - 2011 AN - OPUS4-23542 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Combined impact of UV and chemical flufids on HDPE packaging material T2 - 25th IAPRI Symposium on Packaging CY - Berlin, Germany DA - 2011-05-16 PY - 2011 AN - OPUS4-23795 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - UV-LEDs - a new tool to determine the spectral response T2 - 5th European Weathering Symposium CY - Lisbon, Portugal DA - 2011-09-21 PY - 2011 AN - OPUS4-24417 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Evaluation of Outdoor Exposures by means of Exposure Response Functions N2 - Outdoor exposure tests are a common tool to evaluate the weathering resistance of a polymeric material or component. However, they have only a limited validity, mainly due to the limited reproducibility of the weather as well as of the bad adaptability to other exposure sites. Typically, an outdoor exposure is characterized by the measured radiant exposure; sometimes averaged temperature data are added. These can be – separately – related to long-term annual means, to get an idea on the severity of the exposure. However, as for polymeric ageing, irradiance and temperature act simultaneously, such severity of an outdoor exposure could be better described by a computed property change of a similar material, which is calculated from the hourly irradiance and temperature values on the base of established exposure response functions. In this way, various outdoor exposures are evaluated. For several exposure sites, annual deviations of the ageing amount are related to annual mean values, to evaluate the weathering reproducibility at the exposure site. Additionally, correlations to relevant weather parameters are illuminated. Also some specific exposure conditions, such as tilt angle, are tested. Compared to the use of weathering reference materials, this procedure unfavourably depends on the availability of a suited control as well as on the quality of the established exposure response function. In contrast, it enables a later exposure evaluation, on the base of documented weather data, if for instance no reference material was exposed. T2 - 8th European Weathering Symposium CY - Vienna, Austria DA - 20.09.2017 KW - Photodegradation KW - Weathering KW - Service life prediction PY - 2017 AN - OPUS4-42576 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Geburtig, Anja A1 - Wachtendorf, Volker T1 - Determination of the spectral sensitivity and temperature dependence of polypropylene crack formation caused by UV-irradiation N2 - For polypropylene of varied stabilization, spectral sensitivity as well as temperature dependence of irradiation caused crack formation was determined in artificial irradiation tests. UV radiant exposure HUV necessary to generate crack formation was measured both in spectrally dispersed irradiation and artificial irradiation in a Fluorescent UV lamp device. Dependencies were fitted to a plateau function and an Arrhenius function, respectively, to describe the action of irradiation by response functions. Applied to weather data from Phoenix, the results were compared with respective outdoor exposure results. KW - Weathering KW - UV KW - Temperature KW - Numerical simulation PY - 2010 DO - https://doi.org/10.1016/j.polymdegradstab.2010.06.014 SN - 0141-3910 SN - 1873-2321 VL - 95 IS - 10 SP - 2118 EP - 2123 PB - Applied Science Publ. CY - London AN - OPUS4-21913 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wachtendorf, Volker A1 - Geburtig, Anja T1 - Chemiluminescence for the early detection of weathering effects of coatings - Part I: Fundamentals KW - Chemiluminescence KW - Weathering KW - Polymer KW - Oxidation PY - 2010 SN - 1547-0083 VL - 7 IS - 4 SP - 66 EP - 71 PB - Federation of Societies for Coatings Technology CY - Blue Bell, Pa. AN - OPUS4-21493 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Lüthi, A. A1 - Fäh, D. A1 - Wachtendorf, Volker A1 - Geburtig, Anja ED - Reichert, T. ED - Halafka, S. T1 - Recent Proposals for Weathering Reference Materials as Discussed by DIN and VDA T2 - 1st European Weathering Symposium (EWS-1) ; 23rd Colloquium of Danubian Countries on Natural and Artificial Ageing of Polymers CY - Prague, Czech Republic DA - 2003-09-25 KW - Reference material KW - ORWET KW - Crack KW - Climatic KW - ADF test KW - Spectral sensitivity KW - Referenzmaterial KW - Riss KW - Klimatische Beständigkeit PY - 2003 SN - 3-9808382-3-4 SP - 1(?) EP - 12(?) PB - Gesellschaft für Umweltsimulation e.V. CY - Pfinztal AN - OPUS4-2682 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Einfluss der Bewitterung auf die Kratzbeständigkeit von Automobilllackierungen T2 - Fachtagung Bewitterung und Alterung von Kunststoffen in der Automobilindustrie Süddeutsches Kunstoff-Zentrum CY - Würzburg, Germany DA - 2003-02-19 PY - 2003 AN - OPUS4-4031 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Ermittlung der Beanspruchung bei Bewitterungsversuchen - Referenzmaterialien T2 - 33. Jahrestagung der GUS (Gesellschaft für Umweltsimulation) CY - Pfinztal, Germany DA - 2004-03-17 PY - 2004 AN - OPUS4-4757 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - The Action of Outdoor Weathering on the Scrath Resistance and Reflow Ability of Automotive Clearcoats T2 - 7th Nürnberg Congress CY - Nuremberg, Germany DA - 2003-04-08 PY - 2003 AN - OPUS4-4033 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - The Action of Weathering on the Scrath Behaviour of Automotive Clearcoats T2 - 1st European Weathering Symposium EWS CY - Prague, Czech Republic DA - 2003-09-25 PY - 2003 AN - OPUS4-4034 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wachtendorf, Volker A1 - Geburtig, Anja A1 - Trubiroha, P. T1 - Application of a newly proposed sensor for effective UV-irradiance for the monitoring of both natural and artificial weathering conditions N2 - To improve on the classic radiometric sensor with radiometric measurement [ ] here a new UV-sensor characteristic for effective UV is proposed that no longer applies equal weighting of spectral irradiation into the UV irradiance value but rather aims at approaching a weighting according to a typical spectral sensitivity curve of polymers. This curve resembles the erythema curve of the skin which is the basis of the UV-index. For the use of the sensor it would be desirable to keep it in the artificial weathering device for the complete weathering test (including rain phases) while the same sensor should also be applicable for the monitoring of outdoor weathering exposures. A first application of this kind of weighted measurement and a comparison with radiometric measurements accompanied with polymer ageing results will be presented together with conclusions for a future effective UV irradiance sensor. T2 - 9th European Weathering Symposium CY - Basel, Switzerland DA - 18.09.2019 KW - UV-irradiance PY - 2019 SN - 978-3-9818507-5-8 VL - 19 SP - 293 EP - 306 AN - OPUS4-49154 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wachtendorf, Volker A1 - Barthel, Anne-Kathrin A1 - Geburtig, Anja A1 - Trubiroha, P. ED - Reichert, T. T1 - Low-Temperature Irradiation Experiments for PE, PA, and PC Matrices N2 - In this paper, we demonstrate the effects of radiation exposures of polymeric materials with UV-A 340 nm lamps (ISO 4892-3, Type 1A) at -10 °C in comparison to an irradiation at +50 °C using a Global UV Test 200 fluorescent lamp device from Weiss Umwelttechnik GmbH, which incorporates an active cooling appliance. While the effects at -10 °C actually are lower than at + 50°C their extent was clearly beyond expectations. T2 - 8th European Weathering Symposium CY - Vienna, Austria DA - 20.09.2017 KW - Artificial weathering KW - Irradiation KW - Low-temperature KW - Photo-oxidation KW - Polyamide KW - Polycarbonate KW - Polyethylene PY - 2017 SN - 978-3-9818507-1-0 VL - 18 SP - Paper 22, 319 EP - 329 PB - Thomas Würtz Grafik Design CY - Karlsruhe AN - OPUS4-42130 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Geburtig, Anja A1 - Wachtendorf, Volker A1 - Trubiroha, Peter T1 - Two New Weathering Reference Materials - Monitors for Weathering Exposure T2 - 3rd Service Life Symposium CY - Sedona, AZ, USA DA - 2004-02-01 KW - Weathering KW - Reference material KW - WRM KW - UV KW - Radiance KW - Crack KW - JIS K7200 KW - Humidity KW - Bewitterung KW - Referenzmaterial KW - Riss KW - Bestrahlung KW - Luftfeuchte PY - 2005 SN - 0-934010-60-9 SP - 253 EP - 258 PB - Federation of Societies for Coatings Technology CY - Philadelphia AN - OPUS4-13712 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Geburtig, Anja A1 - Wachtendorf, Volker A1 - Trubiroha, Peter A1 - Takane, Y. T1 - UV-sensitive Weathering Reference Materials T2 - 2nd European Weathering Symposium - Natural and Artificial Ageing of Polymers CY - Gothenburg, Sweden DA - 2005-06-16 KW - Weathering Reference Materials PY - 2005 SN - 3-9808382-9-3 VL - 6 SP - 145 EP - 154 PB - Gesellschaft für Umweltsimulation CY - Pfinztal AN - OPUS4-10376 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Weathering Resistance of Hardcoats for Polycarbonate T2 - 8th Nürnberg Congress "Creative Advances in Coatings Technology" CY - Nuremberg, Germany DA - 2005-04-25 PY - 2005 AN - OPUS4-7351 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Strahlungsmessung beim Bestrahlen und Bewittern T2 - Seminar "Natürliches und künstliches Bewittern polymerer Werkstoffe" der Technischen Akademie Wuppertal CY - Altdorf, Germany DA - 2005-04-28 PY - 2005 AN - OPUS4-7935 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Zum (UV-) Strahlenklima der Erde T2 - Seminar "Natürliches und künstliches Bewittern polymerer Werkstoffe" der Technischen Akademie Wuppertal CY - Altdorf, Germany DA - 2005-04-28 PY - 2005 AN - OPUS4-7937 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - UV-sensitive Weathering Reference Materials T2 - 2nd European Weathering Symposium CY - Gothenburg, Sweden DA - 2005-06-15 PY - 2005 AN - OPUS4-7936 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Grundsätzliches zur Lebensdauervorhersage in der Bewitterung T2 - Jahrestagung der Gesellschaft für Umweltsimulation CY - Pfinztal, Germany DA - 2005-03-03 PY - 2005 AN - OPUS4-5884 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Reflow Ability of Automotive Coatings T2 - XXVII FATIPEC Kongress CY - Aix-en-Provence, France DA - 2004-04-19 PY - 2004 AN - OPUS4-4758 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -