TY - THES A1 - Hasenstab, Andreas Georg Maximilian T1 - Integritätsprüfung von Holz mit dem zerstörungsfreien Ultraschallechoverfahren N2 - Schadstellen im Inneren von Holzbauteilen (z. B. Innenfäule) oder baulich unzugängliche Oberflächenfäule stellen ein besonderes Problem dar, da diese von außen schlecht erkannt werden können und bei einer ausgeprägten Schädigung zu einem plötzlichen Versagen des Bauteils führen können. Ziel der vorliegenden Arbeit war es, eine Messapparatur zu entwickeln und damit zu untersuchen, ob und unter welchen Bedingungen Ultraschallechoverfahren an Holzbauteilen möglich sind. Weiter sollte untersucht werden, welche Schäden und Minderdicken mit Ultraschallecho von nur einer zugänglichen Seite aus geortet werden können. N2 - Wooden construction components bear serious problems, if they hold inner damage (e.g. interior rot) or damage of its surfaces at inaccessible locations. These failures are difficult to recognize from the outside, and might cause sudden malfunction of the structure. The aim of this work was to develop suitable measurement devices and to carry out investigations under which conditions ultrasonic echo technique can be successfully applied to wooden construction components. A further objective was to examine what kind of damage can be located with ultrasonic echo technique applied from only one accessible surface and if areas of reduced thickness can be determined. The investigations have shown that ultrasonic echo technique can be used at wooden constructions with longitudinal and transverse waves. For the first time, it was also possible to determine the different speeds of sound in wood for all polarizations and directions with low-frequency ultrasound. The coupling of the planar longitudinal wave probes (center frequency 100 kHz) required coupling media such as ultrasonic gel and Vaseline. This technique was better suited for smaller specimen with a thickness of less than 10 cm. No coupling media is necessary for the coupling of the transverse wave point contact probes (center frequency 55 kHz). With these probes also structures with larger dimensions could be examined. The use of transverse waves is better suited for several applications and many measurements have been carried out using the TD20 probes. The tests took place from one accessible side using pulse echo technique. Areas of reduced thickness can often be detected by receiving a direct echo, all other damage, e.g. rot, is indicated by shadowing the echo of the back wall. The sound velocity is calculated from the sound path and the transit time of the signal at an accessible part of the component. The echo impulse received from areas with reduced thickness or cavities can thus be related to a specific depth in the material. As the reason for the shadowing of the back wall echo is often not known, radiography with x-rays was used as a further non-destructive testing method and as second NDT method in special cases (reference method). A combination of digital radiography and mobile flash tube was also used and optimized for tests on wooden construction components and trees. The direct comparison between ultrasound technique and x-ray showed a trend towards similar detecting of defects. The ultrasound technique was more sensible for early damage detection. The combination of ultrasonic echo technique and radiography led to a very substantial reduction of possible misinterpretations of damage. Another example for the combination of methods was a fast investigation of large areas with ultrasonic echo technique, followed by an exact investigation at selected points with the minor destructive drilling resistance method. The research showed that ultrasonic echo applied from an accessible component side (only) permits the direct localisation of areas of reduced thickness, cavities, wooden pegs and large branches. Other damages such as rot or insect attack can be located indirectly by shadowing of the back wall echo. Thus a new testing method is available now for the non-destructive testing of wooden components. T3 - BAM Dissertationsreihe - 16 KW - Integritätsprüfung KW - Ultraschallechoverfahren KW - Holz PY - 2006 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-1427 SN - 978-3-86509-527-5 SN - 1613-4249 VL - 16 SP - 1 EP - 190 PB - Wirtschaftsverlag NW CY - Bremerhaven AN - OPUS4-142 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hasenstab, Andreas A1 - Krause, Martin A1 - Hillemeier, B. A1 - Rieck, C. T1 - Use of Low Frequency Ultrasound Echo Technique to Determine Cavities in Wooden Construction Composites T2 - Proceedings of NDT-CE 2003, Non-Destructive Testing in Civil Engineering (NDT-CE) T2 - Proceedings of NDT-CE 2003, Non-Destructive Testing in Civil Engineering (NDT-CE) CY - Berlin, Germany DA - 2003-09-16 PY - 2003 AN - OPUS4-2909 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hasenstab, Andreas A1 - Krause, Martin A1 - Rieck, C. A1 - Hillemeier, B. T1 - Use of Low Frequency Ultrasound Echo Technique to Determine Cavities in Wooden Construction Composites T2 - International Symposium Non-Destructive Testing in Civil Engineering (NDT-CE) T2 - 6th International Symposium Non-Destructive Testing in Civil Engineering (NDT-CE) CY - Berlin, Germany DA - 2003-09-16 PY - 2003 UR - http://www.ndt.net/article/ndtce03/papers/p051/p051.htm SN - 3-931381-49-8 SP - 1(?) EP - 9(?) PB - DGZfP CY - Berlin AN - OPUS4-3230 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hasenstab, Andreas A1 - Krause, Martin ED - Cziesielski, E. T1 - Ultraschallechoverfahren an Holz T2 - Bauphysik-Kalender 2004 PY - 2004 SN - 3-433-01705-0 SP - 52 EP - 58 PB - Ernst CY - Berlin AN - OPUS4-3145 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hasenstab, Andreas A1 - Rieck, C. A1 - Hillemeier, B. A1 - Krause, Martin T1 - Hohlstellenortung in Holzbalken mit dem Ultraschallverfahren T2 - ZfP in Anwendung, Entwicklung und Forschung - Jahrestagung 2002 N2 - Zusammenfassung Die Anwendung des Ultraschallecho-Verfahrens zur Hohlstellenortung in Holzbalken wird beschrieben. An Hand der Versuchsergebnisse wird der Einfluss der Anisotropie des Holzes auf die Messkopfanordnung und Schallgeschwindigkeit dargestellt. Mit der optimierten Messanordnung ist die erfolgreiche Detektierung von Nachbildungen von Minderdicken und Kernfäule möglich. Besonders klar sind Schäden in Faserrichtung (Kernfäulenachbildung) nachzuweisen. Die sehr guten Ergebnisse zeigen die Anwendbarkeit des Ultraschallecho-Verfahrens an Holz. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2002 CY - Weimar, Deutschland DA - 2002-05-06 KW - ZfP an Holzbauteilen KW - Fehlstellen KW - Minderdicken KW - Ultraschallecho-Experimente an Probekörpern PY - 2002 UR - http://www.ndt.net/article/dgzfp02/papers/p32/p32.htm SN - 3-931381-39-0 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 80-CD PB - DGZfP CY - Berlin AN - OPUS4-1937 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hasenstab, Andreas T1 - Aktivitäten der BAM auf dem Gebiet der zerstörungsfreien Materialprüfung von Holz T2 - Bundesarbeitskreis Altbauerneuerung, Projektgruppe Detail- und Systemlösung in der Altbausanierung T2 - Bundesarbeitskreis Altbauerneuerung, Projektgruppe Detail- und Systemlösung in der Altbausanierung CY - Berlin, Germany DA - 2006-06-29 PY - 2006 AN - OPUS4-12494 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hasenstab, Andreas A1 - Taffe, Alexander A1 - Wiggenhauser, Herbert T1 - Object related damage analysis in the course of maintenance of engineering structures T2 - TÜV Rheinland Industrie Service GmbH T2 - TÜV Rheinland Industrie Service GmbH CY - Cologne, Germany DA - 2006-06-19 PY - 2006 AN - OPUS4-12471 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hasenstab, Andreas A1 - Taffe, Alexander T1 - Verfahren und deren Anwendung in der zerstörungsfreien Prüfung von Beton T2 - 2. Tragwerksplanung im Bestand 2005 T2 - 2. Tragwerksplanung im Bestand 2005 CY - Dresden, Germany DA - 2005-10-19 PY - 2005 AN - OPUS4-11149 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hasenstab, Andreas T1 - Verfahren zur Untersuchung von Holzbauteilen unter besonderer Berücksichtigung des zerstörungsfreien Ultraschall-Echo-Verfahrens T2 - 2. Tragwerksplanung im Bestand 2005 T2 - 2. Tragwerksplanung im Bestand 2005 CY - Dresden, Germany DA - 2005-10-19 PY - 2005 AN - OPUS4-11150 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hasenstab, Andreas A1 - Hillemeier, B. A1 - Krause, Martin ED - Bröker, F. T1 - Defect localisation in wood with low frequency ultrasonic echo technique T2 - Proceedings of the 14th International Symposium on Nondestructive Testing of Wood T2 - 14th International Symposium on Nondestructive Testing of Wood CY - Eberswalde, Germany DA - 2005-05-02 PY - 2005 SN - 3-8322-3949-9 SP - 331 EP - 336 PB - Shaker CY - Aachen AN - OPUS4-11307 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -