TY - RPRT A1 - Koch, Matthias A1 - Win, Tin A1 - Hoffmann, Andrea A1 - Nehls, Irene T1 - Gezielte Untersuchung und Optimierung der Verfahrensschritte für die gas-chromatographische Bestimmung von Mineralölkohlenwasserstoffen in Feststoffen aus dem Altlastenbereich nach der Methode des FGAA N2 - Ziel des Forschungsprojektes war es, systematische Untersuchungen der Verfahrensschritte für die gas-chromatographische Bestimmung von Mineralölkohlenwasserstoffen (MKW) in Feststoffen aus dem Altlastenbereich entsprechend der Methode des Fachgremiums Altlastenanalytik (FGAA) sowie des Verfahrens ISO/DIS 16703 durchzuführen, Wege zur Optimierung einzelner Verfahrensschritte aufzuzeigen und beide Verfahren miteinander zu vergleichen. Es wurden Untersuchungen zu den Verfahrensschritten Extraktion, Extraktreinigung, Messung und Integration durchgeführt. Im Ergebnis der Untersuchungen wurde festgestellt, dass die Extraktion von Feststoffproben (20 g) mit einem Extraktionsvolumen von mind. 40 mL Aceton und 20 mL n-Heptan erfolgen muss, um eine zufriedenstellende Extraktionsausbeute zu gewährleisten. Im Rahmen dieses Projektes wurde ein Rechenprogramm für die Bestimmung der Rest- Aceton-Konzentration in Heptan-Extrakten erstellt. Mit diesem Programm können auch die Wasservolumina ermittelt werden, die für eine gewünschte Rest-Aceton-Konzentration notwendig sind. Anhand von Bodenextrakten, PAK-, Stearylstearat- und Triglycerid-Standardlösungen wurde nachgewiesen, dass die Säulen-Technik eine wesentlich effektivere Extraktreinigung bewirkt als das sogenannte Batch-(Schüttel-) Verfahren. In einem Modellversuch an drei verschiedenen Bodenextrakten wurde gezeigt, dass die zwischen FGAA- und ISO-Verfahren unterschiedliche Art der Peak-Integration eines GC-FID Chromatogramms zwischen n-Dekan (C10) und n-Tetracontan (C40) keinen Einfluss auf das Endergebnis hat. Eine Basislinienkorrektur des Proben-Chromatogramms ist daher nicht erforderlich. Das FGAA-Verfahren enthält in seiner Vorschrift für die Berechnung des MKW-Gehalts im Probenmaterial einen systematischen Fehler von etwa 8 %. Dieser Fehler entsteht durch den Unterschied zwischen dem theoretischen Extraktvolumen von 150 mL und dem realen Extraktvolumen von etwa 139 mL. Dieser systematische Fehler sollte in einer nachfolgenden Fassung des FGAA-Verfahrens vermieden werden. T3 - BAM Forschungsberichtreihe - 262 PY - 2003 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-1895 SN - 978-3-86509-036-2 SN - 0938-5533 VL - 262 SP - 1 EP - 36 PB - Wirtschaftsverlag NW CY - Bremerhaven AN - OPUS4-189 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hoffmann, Moritz A1 - Stawarczyk, Bogna A1 - Günster, Jens A1 - Zocca, Andrea T1 - Influence of additives and binder on the physical properties of dental silicate glass-ceramic feedstock for additive manufacturing N2 - Objectives The aim of the study was to investigate the impact of organic additives (binder, plasticizer, and the cross-linking ink) in the formulation of water-based feedstocks on the properties of a dental feldspathic glass-ceramic material developed for the slurry-based additive manufacturing technology “LSD-print.” Material and methods Three water-based feldspathic feedstocks were produced to study the effects of polyvinyl alcohol (AC1) and poly (sodium 4-styrenesulfonate) (AC2) as binder systems. A feedstock without organic additives was tested as the control group (CG). Disc-shaped (n = 15) and bar (n = 7) specimens were slip-cast and characterized in the green and fired states. In the green state, density and flexural strength were measured. In the fired state, density, shrinkage, flexural strength (FS), Weibull modulus, fracture toughness (KIC), Martens parameters, and microstructure were analyzed. Disc-shaped and bar specimens were also cut from commercially available CAD/CAM blocks and used as a target reference (TR) for the fired state. Results In the green state, CG showed the highest bulk density but the lowest FS, while the highest FS in the green state was achieved with the addition of a cross-linking ink. After firing, no significant differences in density and a similar microstructure were observed for all slip-cast groups, indicating that almost complete densification could be achieved. The CAD/CAM specimens showed the highest mean FS, Weibull modulus, and KIC, with significant differences between some of the slip-cast groups. Significance These results suggest that the investigated feedstocks are promising candidates for the slurry-based additive manufacturing of restorations meeting the class 1a requirements according to DIN EN ISO 6871:2019–01. KW - Firing KW - 3D-printing KW - Silicate glass-ceramics KW - Debinding PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-600516 DO - https://doi.org/10.1016/j.jmbbm.2024.106563 SN - 1751-6161 VL - 155 SP - 1 EP - 12 PB - Elsevier B.V. AN - OPUS4-60051 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schmidt, Stephan A1 - Hoffmann, Holger A1 - Garbe, Leif-Alexander A1 - Harrer, Andrea A1 - Steiner, Markus A1 - Himly, Martin A1 - Schneider, Rudolf T1 - Re-assessment of monoclonal antibodies against diclofenac for their application in the analysis of environmental waters N2 - The non-steroidal anti-inflammatory drug (NSAID) diclofenac (DCF) is an important environmental contaminant occurring in surface waters all over the world, because, after excretion, it is not adequately removed from wastewater in sewage treatment plants. To be able to monitor this pollutant, highly efficient analytical methods are needed, including immunoassays. In a medical research project, monoclonal antibodies against diclofenac and its metabolites had been produced. Based on this monoclonal anti-DCF antibody, a new indirect competitive enzyme-linked immunosorbent assay (ELISA) was developed and applied for environmental samples. The introduction of a spacer between diclofenac and the carrier protein in the coating conjugate led to higher sensitivity. With a test midpoint of 3 mg L−1 and a measurement range of 1–30 mg L−1, the system is not sensitive enough for direct analysis of surface water. However, this assay is quite robust against matrix influences and can be used for wastewater. Without adjustment of the calibration, organic solvents up to 5%, natural organic matter (NOM) up to 10 mg L−1, humic acids up to 2.5 mg L−1, and salt concentrations up to 6 g L−1 NaCl and 75 mg L−1 CaCl2 are tolerated. The antibody is also stable in a pH range from 3 to 12. Cross-reactivity (CR) of 1% or less was determined for the metabolites 40-hydroxydiclofenac (40-OH-DCF), 5-hydroxydiclofenac (5-OH-DCF), DCF lactam, and other NSAIDs. Relevant cross-reactivity occurred only with an amide derivative of DCF, 6-aminohexanoic acid (DCF-Ahx), aceclofenac (ACF) and DCF methyl ester (DCF-Me) with 150%, 61% and 44%, respectively. These substances, however, have not been found in samples. Only DCF-acyl glucuronide with a cross-reactivity of 57% is of some relevance. For the first time, photodegradation products were tested for cross-reactivity. With the ELISA based on this antibody, water samples were analysed. In sewage treatment plant effluents, concentrations in the range of 1.9–5.2 mg L−1 were determined directly, with recoveries compared to HPLC-MS/MS averaging 136%. Concentrations in lakes ranged from 3 to 4.4 ng L−1 and were, after pre-concentration, determined with an average recovery of 100% KW - Antikörper KW - Immunoassay KW - Wasser PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-602280 DO - https://doi.org/10.1039/d3ay01333b VL - 16 IS - 21 SP - 3349 EP - 3363 PB - Royal Society of Chemistry (RSC) CY - London AN - OPUS4-60228 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -