TY - CONF A1 - Königsbauer, Korbinian A1 - Wosniok, Aleksander A1 - Nöther, N. A1 - Schaller, M. B. T1 - POF-based digital I-OFDR for strain detection in road construction N2 - We report on the development of a field-proven distributed fiber optic sensing system for structural health monitoring in road construction and civil engineering. The system is based on a cost-efficient digital incoherent optical frequency domain reflectometry (I-OFDR) for distributed strain detection along a polymer optical fiber. In this method, the strain-induced backscatter increase in a graded-index multimode perfluorinated polymer optical fiber (PF-POF) is determined by measuring the complex transfer function of the sensing fiber using a compact digital data acquisition unit. T2 - European Workshop on Optical Fibre Sensors (EWOFS 2023) CY - Mons, Belgium DA - 23.05.2023 KW - Digital I-OFDR KW - Perfluorinated polymer optical fiber KW - Smart geosynthetics KW - Structural health monitoring KW - Road construction KW - Civil engineering PY - 2023 DO - https://doi.org/10.1117/12.2678436 SP - 1264326-1 PB - SPIE AN - OPUS4-57592 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander T1 - Achievements and challenges of distributed polymer optical fiber sensors @BAM N2 - Monitoring of construction projects plays increasingly important role in the implementation of growing needs and requirements, especially in geologically difficult areas. This particularly concerns tunnelling and special civil engineering projects. The use of fiber optic sensors for structural health monitoring provides significant economic advantages regarding lower life-cycle costs of the civil infrastructure. We present our achievements in the development of distributed polymer optical fiber sensors based on Rayleigh and Brillouin scattering for early damage detection. T2 - POF Conference CY - Bilbao, Spain DA - 26.09.2022 KW - Distributed POF sensor KW - OTDR KW - OFDR KW - Smart geosynthetics PY - 2022 AN - OPUS4-56031 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander T1 - POF-based monitoring system using digital I-OFDR for strain detection in road construction N2 - We present a prototype of a distributed POF sensing system for strain detection in road construction and civil engineering ready to be used in practical applications. The system is based on a cost-efficient digital incoherent optical frequency domain reflectometry (I-OFDR). In this approach, the strain-induced changes in the Rayleigh backscattering profile along a perfluorinated polymer optical fiber (PF-POF) are determined by measuring the complex transfer function of the sensing fiber using a compact digital data acquisition unit. The digital unit replaces an oversized vector network analyzer (VNA) enabling suitability of the measurement system for out-door use and providing a significant reduction of the total system costs at the same time. The entire sensor con-cept includes the use of geosynthetics with integrated PF-POFs as two-dimensional sensor structures for geotech-nical applications. The robustness and the functionality of the distributed POF I-OFDR sensors were proven in the field. The field test involved embedding of two geomats, each with two polymer optical sensor loops, into the embankment of the federal road B 91 in a section near Leipzig. The measurements conducted after the sensor-based geomats had been installed confirmed both the potential of such smart geosynthetics and the functionali-ty of the digital I-OFDR prototype. T2 - POF2023 CY - Cork, Irland DA - 17.09.2023 KW - Digital I-OFDR KW - Distriubuted polymer optical fiber sensor KW - Smart geosynthetics KW - Strain detection KW - Structural health monitoring PY - 2023 AN - OPUS4-58423 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander T1 - Distributed polymer optical fiber sensors using digital I-OFDR for geotechnical infrastructure health monitoring N2 - We present a distributed polymer optical fiber sensor system for deformation monitoring of geotechnical infrastructure. The sensor system is based on the digital incoherent optical frequency domain reflectometry (I-OFDR) for the detection of local strain events along a perfluorinated polymer optical fiber (PF-POF) used as a sensing fiber. For the best possible load transfer, the PF-POFs were integrated onto geosynthetics which pose a sensor carrier for the sensing fiber. By using elastic PF-POF instead of a standard glass fiber as a sensing fiber the strain range of geosynthetics-integrated fiber optic sensors could be extended up to 10 % in accordance with the end-user requirements. T2 - 11th European Workshop on Structural Health Monitoring CY - Potsdam, Germany DA - 10.06.2024 KW - Digital I-OFDR KW - Distributed polymer optical fiber sensor KW - Distributed strain sensing KW - Smart geosynthetics KW - Structural health monitoring PY - 2024 AN - OPUS4-60308 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander A1 - Königsbauer, Korbinian A1 - Nöther, Nils A1 - Färber, Jan A1 - Schaller, M.-Barbara A1 - Krebber, Katerina T1 - Distributed polymer optical fiber sensors using digital I-OFDR for geotechnical infrastructure health monitoring N2 - We present a distributed polymer optical fiber sensor system for deformation monitoring of geotechnical infrastructure. The sensor system is based on the digital incoherent optical frequency domain reflectometry (I-OFDR) for the detection of local strain events along a perfluorinated polymer optical fiber (PF-POF) used as a sensing fiber. For the best possible load transfer, the PF-POFs were integrated onto geosynthetics which pose a sensor carrier for the sensing fiber. By using elastic PF-POF instead of a standard glass fiber as a sensing fiber the strain range of geosynthetics-integrated fiber optic sensors could be extended up to 10 % in accordance with the end-user requirements. T2 - 11th European Workshop on Structural Health Monitoring CY - Potsdam, Germany DA - 10.06.2024 KW - Digital I-OFDR KW - Distributed polymer optical fiber sensor KW - Ddistributed strain sensing KW - Smart geosynthetics KW - Structural health monitoring PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-603096 SP - 1 EP - 7 PB - NDT.net AN - OPUS4-60309 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander A1 - Krebber, Katerina T1 - Smart geosynthetics for structural health monitoring applications N2 - Responding to a growing need for intelligent monitoring of critical geotechnical and civil infrastructures, new multifunctional geotextiles and geogrids with integrated optical fibers were developed and investigated within several research projects. Such smart two-dimensional geosynthetics intercorporating optical fibers as distributed sensors provide solutions both for soil reinforcement, erosion control, drainage or environmental protection and for cost-effective monitoring of critical mechanical deformations and temperature distribution in geotechnical and masonry structures at the same time. The integrated fiber optic sensors provide online information about the condition of the monitored structure and about the occurrence and localization of any damage or degradation for the purpose of preventing a total collapse. T2 - The Fiber Society's Spring 2017 Conference CY - Institut für Textiltechnik der RWTH Aachen, Germany DA - 17.05.2017 KW - Smart geosynthetics KW - Sensor-based geotextiles KW - Fiber optic sensor KW - POF sensor KW - Distributed sensing PY - 2017 SP - 43 AN - OPUS4-42560 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander T1 - Smart geosynthetics for structural health monitoring applications N2 - Responding to a growing need for intelligent monitoring of critical geotechnical and civil infrastructures, new multifunctional geotextiles and geogrids with integrated optical fibers were developed and investigated within several research projects. Such smart two-dimensional geosynthetics intercorporating optical fibers as distributed sensors provide solutions both for soil reinforcement, erosion control, drainage or environmental protection and for cost-effective monitoring of critical mechanical deformations and temperature distribution in geotechnical and masonry structures at the same time. The integrated fiber optic sensors provide online information about the condition of the monitored structure and about the occurrence and localization of any damage or degradation for the purpose of preventing a total collapse. The optical fibers have a serious advantage over other kinds of sensors due to their fibrous nature, so they can be ideally processed like standard textile yarns. The monitoring of extended geotechnical structures like dikes, dams, railways, embankments or slopes requires sensor technologies with measurement lengths of at least some hundred meters which can be realized by the use of silica fibers. However, the integration of silica fibers into geosynthetics during the manufacturing process experienced problems of sensor brittleness, low strain range not exceeding 2 % and bending-related attenuation increase optimized to the value of 1.5 dB/km. Unlike silica fibers, the integration of polymer optical fibers (POFs) into various geosynthetics was easily achieved free of bending losses enabling distributed high strain measurements up to 40 % using PMMA POFs. The first industrial product GEDISE based on a geogrid with integrated PMMA POFs is on the market. Due to the five times lower attenuation of low-loss perfluorinated graded-index POFs (PFGI-POFs), compared to PMMA POFs, the measurement range can be extended to 500 m. The low-loss PFGI-POFs offer the possibility of implementation of Brillouin optical fiber frequency domain analysis (BOFDA) which will significantly improve the measurement accuracy and spatial resolution in comparison with existing POF-based distributed measurement methods like POF OTDR. The development of a distributed Brillouin system based on PFGI-POFs is in progress. T2 - The Fiber Society’s Spring 2017 Conference CY - Institut für Textiltechnik der RWTH Aachen, Germany DA - 17.05.2017 KW - Smart geosynthetics KW - Sensor-based geotextiles KW - Fiber optic sensor KW - Distributed sensing PY - 2017 AN - OPUS4-40319 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander A1 - Liehr, Sascha T1 - Health monitoring of geotechnical structures by distributed fiber optic sensors N2 - Health monitoring of ground movement via highly sensitive fiber optic sensors allows operators to detect early potential or ongoing failures in critical geotechnical structures. Particularly, the fiber optic sensors can be embedded in geosynthetics which are nowadays widely used in many geotechnical applications including earth dikes, railway embankments, landfill liners, quarries and mines. Thereby, such smart geosynthetics can be used for reinforcement, layer separation, filtration or drainage while the embedded fiber optic sensors provide information about the condition of the geotechnical structures in real time. The paper highlights the results achieved in this innovative field in the framework of several German and European projects. The presented measurement methods for long-term monitoring are based on Brillouin scattering in silica glass optical fibers (GOFs) and optical time domain reflectometry (OTDR) in polymer optical fibers (POFs). T2 - AMA Conferences 2017 Sensor 2017 CY - Nürnberg, Germany DA - 30.05.2017 KW - Fiber optic sensor KW - Distributed sensor KW - Smart geosynthetics KW - Brillouin sensor KW - OTDR PY - 2017 SN - 978-3-9816876-4-4 DO - https://doi.org/10.5162/sensor2017/B7.4 SP - 280 EP - 285 PB - AMA Service GmbH CY - Wunstorf AN - OPUS4-40514 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander A1 - Krebber, Katerina T1 - Distributed Brillouin fiber optic sensor system for long-term structural health monitoring N2 - We report on the development of a distributed fiber optical sensor system for structural health monitoring of largc-scale geotechnical and civil infrastructures. The system is based on Brillouin frequency domain analysis (BOFDA) for distributed measurement of strain and temperature along Standard silica optical fibers used as sensors. By additional incorporation of the fiber optic sensors in geosynthetics, two-dimensional sensors can be realized. Such smart geosynthetics can be used for reinforeerneut of geotechnical and masonry structures and the embedded fiber optic sensors can provide information about the condition of the structures and detect the presence of any damages and destructions in real time. T2 - 16th International conference 'Technical dam control' CY - Wierchomla Mala, Poland DA - 29.09.2015 KW - Distributed fiber optical sensor KW - Brillouin frequency domain analysis KW - Smart geosynthetics KW - Structural health monitoring PY - 2015 SN - 978-83-64979-09-5 SP - 271 EP - 278 AN - OPUS4-34728 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander T1 - Health monitoring of geotechnical structures by distributed fiber optic sensors N2 - Health monitoring of ground movement via highly sensitive fiber optic sensors allows operators to detect early potential or ongoing failures in critical geotechnical structures. Particularly, the fiber optic sensors can be embedded in geosynthetics which are nowadays widely used in many geotechnical applications including earth dikes, railway embankments, landfill liners, quarries and mines. Thereby, such smart geosynthetics can be used for reinforcement, layer separation, filtration or drainage while the embedded fiber optic sensors provide information about the condition of the geotechnical structures in real time. The paper highlights the results achieved in this innovative field in the framework of several German and European projects. The presented measurement methods for long-term monitoring are based on Brillouin scattering in silica glass optical fibers (GOFs) and optical time domain reflectometry (OTDR) in polymer optical fibers (POFs). T2 - AMA Conferences 2017 Sensor 2017 CY - Nürnberg, Germany DA - 30.05.2017 KW - Fiber optic sensor KW - Distributed sensor KW - Smart geosynthetics KW - Brillouin sensor KW - OTDR PY - 2017 AN - OPUS4-40523 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wosniok, Aleksander A1 - Krebber, Katerina T1 - Smart Geosynthetics Based on Distributed Fiber Optic Sensors in Geotechnical Engineering N2 - Smart geosynthetics with embedded optical fibers as distributed sensors provide solutions both for applications in geotechnical engineering and for cost-effective monitoring of critical infrastructures. The incorporation of glass or polymer optical fibers (GOFs or POFs) in geotextiles and geogrids allows early detection of mechanical deformations, temperature and humidity. This paper presents selected examples of smart geosynthetics based on Brillouin and Rayleigh scattering effects in incorporated fiber optic sensors for monitoring of large geotechnical structures like dikes, dams, railways, embankments or slopes. The focus of the presented work is on real field tests of measurement capability with respect to the chosen measurement principle and used fiber type. KW - Polymer optical fiber (POF) KW - Smart geosynthetics KW - Fiber optic sensor KW - Distributed sensing KW - Glass optical fiber (GOF) PY - 2019 SN - 0046-5828 SP - 91 EP - 95 PB - Southeast Asian Geotechnical Society CY - Bangkok AN - OPUS4-48068 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -